Selective oxidation of carbon monoxide in hydrogen-containing gas on CuO-CeO<Subscript>2</Subscript>/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> catalysts prepared by surface self-propagating thermal synthesis

The CuO-CeO₂/Al₂O₃ catalysts for the selective oxidation of CO in hydrogen-containing mixtures were prepared by surface self-propagating thermal synthesis (SSTS) with the use of cerium nitrate Ce(NO₃)₃, the ammonia complex of copper acetate [Cu(NH₃)₄](CH₃COO)₂, and citric acid C₆H₈O₇ as a fuel additive. The effect of the C₆H₈O₇/Ce(NO₃)₃ molar ratio on the catalyst activity and selectivity for oxygen was studied. The catalyst samples were studied by X-ray diffraction (XRD) analysis, temperature-programmed reduction (TPR-H₂), IR spectroscopy of adsorbed CO, and transmission electron microscopy (TEM). It was found that an increase in the C₆H₈O₇/Ce(NO₃)₃ ratio resulted in an increase in the degree of dispersion of the resulting CeO₂ phase. The greatest amount of dispersed CuO particles, which are responsible for catalytic activity in the oxidation of CO, was formed at C₆H₈O₇/Ce(NO₃)₃ = 1.     

Thermal stability and surface structure of Mo/CeO<Subscript>2</Subscript> and Ce-doped Mo/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> catalysts

In order to explore the influence of CeO₂ on the structure and surface characteristics of molybdena, an investigation was undertaken by using N₂ adsorption (BET method), thermal analysis and in-situ diffuse reflectance infrared (DRIFT) techniques. In this work, the Mo/CeO₂ and Ce-Mo/Al₂O₃ samples were prepared by impregnation and co-precipitation methods with high Mo loadings. Combining the results one may notice that the presence of ceria led to the increase of polymerized surface Mo species so as to forming Mo-O-Ce linkages besides the formation of coupled O=Mo=O bonds indicative of polymeric MoO₃. From thermal analysis, it can be inferred that Mo/Al₂O₃ is the thermally most stable material in the temperature range used in the experiment (up to 900°C), whereas Ce-Mo/Al₂O₃ and Mo/CeO₂ samples undergo morphological modifications above 700°C resulting in lattice defects, which motivate the mobility of Mo and Ce ions and thus enhance the possibility of interaction between them. Additionally, their activity towards CO adsorption needs reduced ceria and molybdena containing coordinatively unsaturated sites (CUS), oxygen vacancies and hydroxyl groups to form various carbonate species.     

Effect of Pd and rare earth oxides (La<Subscript>2</Subscript>O<Subscript>3</Subscript>, CeO<Subscript>2</Subscript>) on the properties of a Co<Subscript>3</Subscript>O<Subscript>4</Subscript>/cordierite catalyst in reduction of O<Subscript>2</Subscript> and no by hydrogen

We have established that introducing a promoter (Pd) and modifying additives (La₂O₃, CeO₂) into the composition of a Co₃O₄/cordierite catalyst leads to an increase in its activity and selectivity during reduction of oxygen by hydrogen in the presence of nitrogen(II) oxide.     

Role of rare-earth element oxides in catalysts for the oxidative conversion of methane based on Ni/Al<Subscript>2</Subscript>O<Subscript>3</Subscript>

It has been established that oxides of the rare-earth elements with moderate redox potentials (La₂O₃, CeO₂) increased the activity and working stability of Ni-Al₂O₃/cordierite catalysts in the reactions of deep and partial oxidation of methane. In the presence of the (NiO + La₂O₃ + Al₂O₃)/cordierite catalyst the process of carbon dioxide conversion of methane can be intensified by introduction of oxygen into the reaction gas mixture which decreases the temperature to achieve high conversion to 75–100 °C and has practically no effect on selectivity with respect to H₂. Translated from Teoreticheskaya i éksperimental'naya Khimiya, Vol. 44, No. 6, pp. 359–364, November–December, 2008.     

Review of Ag/Al<Subscript>2</Subscript>O<Subscript>3</Subscript>-Reductant System in the Selective Catalytic Reduction of NO<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>

Ag/Al₂O₃ is a promising catalyst for the selective catalytic reduction (SCR) by hydrocarbons (HC) of NO _x in both laboratory and diesel engine bench tests. New developments of the HC-SCR of NO _x over a Ag/Al₂O₃ catalyst are reviewed, including the efficiencies and sulfur tolerances of different Ag/Al₂O₃-reductant systems for the SCR of NO _x ; the low-temperature activity improvement of H₂-assisted HC-SCR of NO _x over Ag/Al₂O₃; and the application of a Ag/Al₂O₃-ethanol SCR system with a heavy-duty diesel engine. The discussions are focused on the reaction mechanisms of different Ag/Al₂O₃-reductant systems and H₂-assisted HC-SCR of NO _x over Ag/Al₂O₃. A SO₂-resistant surface structure in situ synthesized on Ag/Al₂O₃ by using ethanol as a reductant is proposed based on the study of the sulfate formation. These results provide new insight into the design of a high-efficiency NO _x reduction system. The diesel engine bench test results showed that a Ag/Al₂O₃-ethanol system is promising for catalytic cleaning of NO _x in diesel exhaust.     

Investigation of macro-/mesoporous Re<Subscript>2</Subscript>O<Subscript>7</Subscript>/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> catalysts prepared by a particle-template method for butylene metathesis

Macro-/mesoporous Al₂O₃ supports were prepared by using monodisperse polystyrene (PS) microspheres as a template. The pore volume and BET surface area of the Al₂O₃ supports increased considerably with increasing amounts of the PS microspheres; further investigation showed that PS template only increased the volume of macro-pores but did not change the volume of meso-pores or micro-pores. Macro-/mesoporous Re₂O₇/Al₂O₃ metathesis catalysts were prepared through loading Re₂O₇ onto the as-prepared macro-/mesoporous Al₂O₃ supports, and their catalytic performance was tested in a fixed-bed tubular reactor using the metathesis of normal butylenes as a probe reaction. The results showed that the prepared macro-/mesoporous Re₂O₇/Al₂O₃ catalyst had high activity with consistent selectivity; propylene and pentene accounted for more than 90 wt% of the metathesis products, while the amount of ethylene plus hexane was less than 10 wt%, the majority of which was hexane. These Re₂O₇/Al₂O₃ catalysts had not only higher activity, but also longer working life span and higher tolerance to carbon residues than conventional Re₂O₇/Al₂O₃ catalysts.     

Monolithic FeO<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> catalysts for ammonia oxidation and nitrous oxide decomposition

(1.2–8.3)%FeO_х/Al₂O₃ monolith catalysts have been prepared by impregnating alumina with aqueous solutions of iron(III) nitrate and oxalate and have been tested in NH₃ oxidation and in the selective decomposition of N₂O in mixtures resulting from ammonia oxidation over a Pt–Rh gauze pack under conditions of nitric acid synthesis (800–900°C). In the case of the support calcined at 1200°C, the catalyst is dominated by bulk Fe₂O₃ particles localized on the Al₂O₃ surface. The activity of these samples in both reactions decreases with a decreasing active component content, thus limiting the potential of Fe₂(C₂O₄)₃ · 5H₂O, an environmentally friendlier but poorly soluble compound, as a substitute for Fe(NO₃)₃ · 9H₂O. Decreasing the support calcination temperature to 1000°C or below leads to the formation of a highly defective Fe–Al–O solid solution in the (1.2–2.7)%FeO_х/Al₂O₃ catalysts. The surface layers of the solid solution are enriched with iron ions or stabilize ultrafine FeO_х particles. The catalytic activity of these samples in both reactions is close to the activities measured for ~8%FeO_х/Al₂O₃ samples prepared using iron nitrate.     

Kinetic studies on the hydrogenation of nitrate in water using Rh/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> and Rh-Cu/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> catalysts

Liquid-phase reduction NO ₃ ⁻ using monometallic and bimetallic catalysts (5% Rh/Al₂O₃, 5% Rh-0.5% Cu/Al₂O₃, 5% Rh-1.5% Cu/Al₂O₃, 5% Rh-5% Cu/Al₂O₃ and a physical mixture of 5% Rh/Al₂O₃ and 1.5% Cu/Al₂O₃) was studied in a slurry reactor operating at atmospheric pressure. Kinetic measurements were performed for a low concentration of nitrate (0.4 × 10⁻³−3.2 × 10⁻³ mol dm⁻³) and the temperature range 293–313 K. From the experimental data, it was found that the reduction of nitrate is first order with respect to nitrate. On the basis of the rate constants, the apparent activation energy was established using a graphic method. Published in Russian in Kinetika i Kataliz, 2007, Vol. 48, No. 6, pp. 881–886. This article was submitted by the authors in English.     

Effect of CeO<Subscript>2</Subscript> on the properties of the Pd/Co<Subscript>3</Subscript>O<Subscript>4</Subscript>/cordierite catalyst in the conversion of CO,NO, and hydrocarbons

The effect of CeO₂ on the properties of the Pd/Co₃O₄-CeO₂/cordierite catalyst is a function of the method of its preparation. The catalyst obtained by the simultaneous deposition of cerium oxide and cobalt oxide showed high activity in the oxidation of CO (CO + O₂, CO + NO) and extensive oxidation of hexane (C₆H₁₄ + O₂). This behavior is due to the increased mobility of surface oxygen and increased dispersion of the catalyst components.     

Glass formation in the Al<Subscript>2</Subscript>(SO<Subscript>4</Subscript>)<Subscript>3</Subscript>-Al(NO<Subscript>3</Subscript>)<Subscript>3</Subscript>-H<Subscript>2</Subscript>O system

Glass formation boundaries in the Al₂(SO₄)₃-Al(NO₃)₃-H₂O system were determined. IR spectra were studied. Schemes of structural rearrangements within the boundaries of a second glass formation region in the Al(NO₃)₃-H₂O binary subsystem are suggested. A structure is suggested for glassy Al(NO₃)₃H₂O.     

Gold catalysts supported on ZnO/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> for low-temperature CO oxidation

Gold catalysts with loadings ranging from 0.5 to 7.0 wt% on a ZnO/Al₂O₃ support were prepared by the deposition–precipitation method (Au/ZnO/Al₂O₃) with ammonium bicarbonate as the precipitation agent and were evaluated for performance in CO oxidation. These catalysts were characterized by inductively coupled plasma-atom emission spectrometry, temperature programmed reduction, and scanning transmission electron microscopy. The catalytic activity for CO oxidation was measured using a flow reactor under atmospheric pressure. Catalytic activity was found to be strongly dependent on the reduction property of oxygen adsorbed on the gold surface, which related to gold particle size. Higher catalytic activity was found when the gold particles had an average diameter of 3–5 nm; in this range, gold catalysts were more active than the Pt/ZnO/Al₂O₃ catalyst in CO oxidation. Au/ZnO/Al₂O₃ catalyst with small amount of ZnO is more active than Au/Al₂O₃ catalyst due to higher dispersion of gold particles.     

Activity and stability of Ni/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> catalysts in carbon dioxide conversion of methane as influenced by alkali metal oxide additives (K<Subscript>2</Subscript>O,Na<Subscript>2</Subscript>O,Li<Subscript>2</Subscript>O)

Properties of Ni/Al₂O₃ composites supported by synthetic cordierite ceramic block matrices of honeycomb structure in carbon dioxide conversion of methane in the presence of alkali metal oxides (K₂O, Na₂O, Li₂O) were studied in comparison with those of GIAP-18 granulated catalyst.     

Oxonitrates VO(NO<Subscript>3</Subscript>)<Subscript>3</Subscript> and MoO<Subscript>2</Subscript>(NO<Subscript>3</Subscript>)<Subscript>2</Subscript> and nitronium and nitrosonium nitratometallates as nitrating agents

Dissolution of vanadium in anhydrous HNO₃ followed by exposure of the solution in a dessicator over P₂O₅ gave liquid vanadyl trinitrate (I). The X-ray diffraction analysis of I was carried out for a single crystal grown on cooling the liquid in a sealed capillary. The structure is composed of VO(NO)₃ molecules in which the V atom has an unusually high C.N. 7; it coordinates the terminal O atom and three bidentate nitrate groups to form a distorted pentagonal bipyramid as the coordination polyhedron with the terminal O atom occupying one axial vertex. Using the GAMESS program package, ab initio calculation of the structure of VO (NO₃)₃ in the liquid phase was carried out. It was shown that in all three physical states, vanadyl trinitrate retains its molecular structure almost invariable. Toluene and naphthalene nitration using I and (NO₂)[Fe(NO₃)₄], NO[Cu(NO₃)₃], (NO)_3/4(NO₂)_1/4[Zr(NO₃)₅], and MoO₂(NO₃)₂ proceeds at high rates at low temperatures to give an unusually high para-nitrotoluene percentage in the products as compared with the ortho-isomer. The activity of the studied compounds in the nitration of naphthalene decreases in the series VO(NO₃)₃ > (NO)_3/4(NO₂)_1/4[Zr(NO₃)₅] > MoO₂(NO₃)₂.     

Trimetallic NiMoW/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> hydrotreating catalyst based on H<Subscript>4</Subscript>SiMo<Subscript>3</Subscript>W<Subscript>9</Subscript>O<Subscript>40</Subscript> mixed heteropoly acid

Trimetallic NiMoW/Al₂O₃ catalyst was prepared using mixed H₄SiMo₃W₉O₄₀ heteropoly acid of Keggin structure and nickel citrate. Bimetallic NiMo/Al₂O₃ and NiW/Al₂O₃ catalysts based on H₄SiMo₁₂O₄₀ and H₄SiW₁₂O₄₀, respectively, were synthesized as reference samples. The use of mixed H₄SiMo₃W₉O₄₀ heteropoly acid as an oxide precursor allows the tungsten sulfidation degree and the degree of promotion of active phase particles to be increased. The hydrodesulfurization activity is enhanced as compared to NiW/Al₂O₃ catalyst. The synergistic enhancement of the activity of the NiMo₃W₉/Al₂O₃ catalyst relative to the bimetallic analogs is probably caused by formation of new mixed promoted active sites for direct desulfurization.     

The catalytic performance of different promoted iron catalysts on combined supports Al<Subscript>2</Subscript>O<Subscript>3</Subscript> for carbon dioxide hydrogenation

Global warming, fossil fuel depletion and fuel price increases have motivated scientists to search for methods for the storage and reduction of the amount of greenhouse gases, especially CO₂. The hydrogenation process has been introduced as an emerging method of CO₂ capture and convertion into value-added products. In this study, new types of catalysts are introduced for CO₂ hydrogenation and are compared based on catalytic activity and product selectivity. The physical properties of the samples are specified using BET. Iron catalysts supported on γ-Al₂O₃ with different metal promoters (X = Ni, K, Mn, Cu) are prepared through the impregnation method. Moreover, Fe–Ni catalysts supported on HZSM5-Al₂O₃ and Ce–Al₂O₃ are synthesized. Samples are reduced by pure H₂ and involved in hydrogenation reaction in a fixed bed reactor (H₂/CO₂ = 3, total pressure = 10 MPa, temperature = 523 K, GHSV = 2000, 1250 nml/min). All catalysts provide high conversion in hydrogenation reactions and the results illustrate that the selectivity of light hydrocarbons is higher than that of methane and CO. It is found that Ni has a promoting effect on the conversion fluctuations throughout the reaction with 66.13% conversion. Using combined supported catalysts leads to enhancing catalytic performance. When Fe–Ni/γ–Al₂O₃—HZSM5 is utilized, CO₂ conversion is 81.66% and the stability of the Fe–Ni catalyst supported on Al₂O₃ and Ce–Al₂O₃ furthey improves.     

Use of the differential charging effect in XPS to determine the nature of surface compounds resulting from the interaction of a Pt/(BaCO<Subscript>3</Subscript> + CeO<Subscript>2</Subscript>) model catalyst with SO<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>

Changes in the chemical composition of the surface of a Pt/(BaCO₃ + CeO₂) model NO _x storage-reduction catalyst upon its interaction with SO _x (SO₂ (260 Pa) + O₂ (2600 Pa) + H₂O (525 Pa)) followed by regeneration in a mixture of CO (2100 Pa) with H₂O (525 Pa) were studied by X-ray photoelectron spectroscopy (XPS). Model catalyst samples were prepared as a thin film (about several hundreds of angstrom units in thickness) on the surface of tantalum foil coated with a layer of aluminum oxide (～100 Å). It was found that the Pt/BaCO₃ and Pt/CeO₂ catalyst constituents acquired different surface charges (differential charging) in the course of photoelectron emission; because of this, it was possible to determine the nature of surface compounds formed as a result of the interaction of the catalyst with a reaction atmosphere. It was found that barium carbonate was converted into barium sulfate as a result of reaction with SO _x on the surface of BaCO₃ at 150°C. As the treatment temperature in SO _x was increased to 300°C, the formation of sulfate on the surface of CeO₂ was observed. The sulfatization of CeO₂ was accompanied by the reduction of Ce(IV) to Ce(III). The regeneration reaction of the catalyst treated in SO _x at 300°C resulted in the consecutive decomposition of cerium(III) sulfate at ≤500°C and then barium sulfate at 600–700°C. Upon the decomposition of BaSO₄, a portion of sulfur was converted into a sulfide state, probably, because of the formation of BaS.     

Influence of the composition of carriers based on ZrO<Subscript>2</Subscript> and Al<Subscript>2</Subscript>O<Subscript>3</Subscript> on the properties of cobalt-containing catalysts on the selective reduction of NO with methane

A series of cobalt-containing granulated and structured catalysts based on zirconium and aluminum oxides has been studied. The optimum composition of binary oxide samples (80% ZrO₂ − 20% Al₂O₃) for the selective reduction of nitrogen monoxide with methane (84% conversion of NO achieved at 320 °C) has been determined. The activity of the structured catalysts depends on both the composition of the secondary carrier (ZrO₂, Al₂O₃, and their mixture) and on the nature of the skeleton of the cellular structure (cordierite, kaolin-aerosil). __________ Translated from Teoreticheskaya i éksperimental’naya Khimiya, Vol. 43, No. 4, pp. 237–241, July–August, 2007.     

The effect of spinel type support FeAlO<Subscript>3</Subscript>, ZnAl<Subscript>2</Subscript>O<Subscript>4</Subscript>, CrAl<Subscript>3</Subscript>O<Subscript>6</Subscript> on physicochemical properties of Cu,Ag, Au,Ru supported catalysts for methanol synthesis

The comparative study of the role of binary oxide support on catalyst physico-chemical properties and performance in methanol synthesis were undertaken and the spinel like type structures (ZnAl₂O₄, FeAlO₃, CrAl₃O₆) were prepared and used as the supports for 5% metal (Cu, Ag, Au, Ru) dispersed catalysts. The monometallic 5% Cu/support and bimetallic 1% Au (or 1% Ru)-5% Cu/support (Al₂O₃, ZnAl₂O₄, FeAlO₃, CrAl₃O₆) catalysts were investigated by BET, XRD and TPR methods. Activity tests in methanol synthesis of CO and CO₂ mixture hydrogenation were carried out. The order of Cu/support catalysts activity in methanol synthesis: CrAl₃O{ia6} > FeAlO₃ > ZnAl₂O₄ is conditioned by their reducibility in hydrogen at low temperature. Gold appeared more efficient than ruthenium in promotion of Cu/support catalysts. Published in Russian in Kinetika i Kataliz, 2009, Vol. 50, No. 2, pp. 242–248. The article is published in the original.     

Co-Mo/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> and Ni-W/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> catalysts: Potential and prospects for use in hydrotreating of light cycle oil from catalytic cracking

Со-Мо/Al₂O₃ and Ni-W/Al₂O₃ catalysts were tested in hydrotreating of light cycle oil from catalytic cracking, of the straight-run gasoil, and of their mixture under typical hydrotreating conditions used in industry. The catalysts prepared using PMo₁₂ and PW₁₂ heteropoly acids exhibit high catalytic activity. The Со-Мо/Al₂O₃ catalyst is more active in hydrodesulfurization and hydrogenation of olefin and diene hydrocarbons, whereas the Ni-W/Al₂O₃ catalysts are more active in hydrogenation of mono- and polycyclic aromatic hydrocarbons. Comparison of the quality characteristics of the hydrogenizates obtained with the requirements of the technical regulations shows that the required levels of the sulfur content and cetane number of the hydrogenizates at practically accessible process parameters can be reached for mixtures of the straight-run gasoil and light cycle oil from catalytic cracking with high content of the latter component only when the process with the Со-Мо/Al₂O₃ system and Ni-W/Al₂O₃ catalysts is performed in two steps.     

Effect of Er<Subscript>2</Subscript>O<Subscript>3</Subscript> on thermal stability of oxyfluoride glass

Glasses have been synthesized in the system SiO₂–Al₂O₃–Na₂O–AlF₃–LaF₃–Er₂O₃. A base glass (in mol% 67SiO₂–9Al₂O₃–20Na₂O–Al₂F₆–3La₂F₆) was modified by 0.5, 0.75, 1, 1.25, 1.5, 2 and 5 mol% Er₂O₃, respectively. Glasses were prepared by conventional fusion method from 20 g batches. The glass transition temperature (T _g), the jump-like changes of the specific heat (ΔC _p) accompanying the glass transition and the enthalpy of crystallization (ΔH) were calculated. DTA measurements clearly reveal that the increase of the Er₂O₃ content in the glass changes the effects of crystallization and diminishes the thermal stability of the glassy network. In the same time the changes in the transition temperature are observed. The formation of NaLaF₄ and Na_1.45La_9.31(SiO₄)₆(F_0.9O_1.1) as a main phase was confirmed. The diminishing of the thermal stability was connected with erbium which incorporated into Na_1.45La_9.31(SiO₄)₆(F_0.9O_1.1) structure.