Activity coefficients at infinite dilution of organic compounds in 1-(meth)acryloyloxyalkyl-3-methylimidazolium bromide using inverse gas chromatography

Activity coefficients at infinite dilution, gammainfinity, of organic compounds in two new room-temperature ionic liquids (n-methacryloyloxyhexyl-N-methylimidazolium bromide (C10H17O2MIM)(Br) at 313.15 and 323.15 K and n-acryloyloxypropyl-N-methylimidazolium bromide(C6H11O2MIM)(Br)) were determined using inverse gas chromatography. Phase loading studies of the net retention volume per gram of packing as a function of the percent phase loading were used to estimate the influence of concurrent retention mechanisms on the accuracy of activity coefficients at infinite dilution of solutes in both ionic liquids. It was found that most of the solutes were retained largely by partition with a small contribution from adsorption and that n-alkanes were retained predominantly by interfacial adsorption on ionic liquids studied in this work. The solvation characteristics of the two ionic liquids were evaluated using the Abraham solvation parameter model.     

Infinite dilution activity coefficients and gas-to-liquid partition coefficients of organic solutes dissolved in 1-sec-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide and in 1-tert-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide

Inverse gas chromatography was used to measure infinite dilution activity coefficients and gas-to-liquid partition coefficients for 48 organic solute probes in either 1-sec-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide or 1-tert-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide in the temperature range from 323.15 to 373.15 K. Partial molar excess enthalpies of solution were calculated from the variation of the infinite dilution activity coefficients with temperature. Abraham model correlations were also derived from the experimental partition coefficient data. The derived Abraham model correlations describe the observed partition coefficients to within 0.11 log units.     

Determination of solute partition behavior with room-temperature ionic liquid based micellar gas-liquid chromatography stationary phases using the pseudophase model

The use of micelles in ionic liquid based gas-chromatography stationary phases was evaluated using equations derived for a "three-phase" model. This model allows the determination of all three partition coefficients involved in the system, and elucidates the micellar contribution to retention and selectivity. Four types of micellar-ionic liquid columns were examined in this study: 1-butyl-3-methylimidazolium chloride with sodium dodecylsulfate or dioctyl sulfosuccinate, and 1-butyl-3-methylimidazolium hexafluorophosphate with polyoxyethylene-100-stearyl ether or polyoxyethylene-23-lauryl ether. The partition coefficients were measured for a wide range of probe molecules capable of a variety of types and magnitudes of interactions. In general, most probe molecules preferentially partitioned to the micellar pseudophase over the bulk ionic liquid component of the stationary phase. Therefore, addition of surfactant to the stationary phase usually resulted in greater solute retention. It is also shown that the selectivity of the stationary phase is significantly altered by the presence of micelles, either by enhancing or lessening the separation. The effects of surfactant on the interaction parameters of the stationary phase are determined using the Abraham solvation parameter model. The addition of sodium dodecylsulfate and dioctyl sulfosuccinate to 1-butyl-3-methylimidazolium chloride stationary phases generally increased the phase's hydrogen bond basicity and increased the level of dispersion interaction. Polyoxyethylene-100-stearyl ether and polyoxyethylene-23-lauryl ether surfactants, however, enhanced the pi-pi/n-pi, polarizability/dipolarity, and hydrogen bond basicity interactions of 1-butyl-3-methylimidazolium hexafluorophosphate to a greater degree than the ionic surfactants with 1-butyl-3-methylimidazolium chloride. However, these nonionic surfactants appeared to hinder the ability of the stationary phase to interact with solutes via dispersion forces. Therefore, it is possible to effectively predict which analytes will be most highly retained by these micellar-ionic liquid stationary phases.     

Photophysics and dynamics of a β-carboline analogue in room temperature ionic liquids

Room temperature ionic liquids are rapidly emerging as a new class of media that are ideally suited for various applications including carrying out chemical reactions. In the present article, we report the photophysics of a β-carboline analogue, namely, 3-acetyl-4-oxo-6,7-dihydro-12H indolo-[2,3-a] quinolizine (AODIQ), in three room temperature ionic liquids (RTILs), 1-butyl-3-methylimidazolium methyl sulfate ([BMIM][MeSO(4)]), 1-butyl-3-methylimidazolium octyl sulfate ([BMIM][C(8)SO(4)]) and 1-ethyl-3-methylimidazolium methyl sulfate ([EMIM][MeSO(4)]). Out of these, [BMIM][C(8)SO(4)] is a typical RTIL that forms micellar aggregates above a critical micellar concentration (CMC). Steady state absorption, steady state and time resolved fluorescence techniques are used to probe the properties of these systems. The investigation reveals that the photophysics of AODIQ is modified significantly in the micelle-forming RTIL as compared to that in the other two. A comparative study with the fluorophore in [BMIM][C(8)SO(4)] and a conventional anionic surfactant of a similar hydrophobic chain length from the sodium-n-alkyl sulfate series, viz., sodium octyl sulfate (S(8)S), reveals that the fluorophore experiences a more constrained environment in the RTIL micelle as compared to the conventional anionic micelle.     

Partition coefficients of organic compounds in new imidazolium based ionic liquids using inverse gas chromatography

Partition coefficients of organic compounds in four ionic liquids: 1-ethanol-3-methylimidazolium tetrafluoroborate, 1-ethanol-3-methylimidazolium hexafluorophosphate, 1,3-dimethylimidazolium dimethylphosphate and 1-ethyl-3-methylimidazolium diethylphosphate were measured using inverse gas chromatography from 303.3 to 332.55 K. The influence of gas–liquid and gas–solid interfacial adsorption of different solutes on ionic liquids was also studied. Most of the polar solutes were retained largely by partition while light hydrocarbons were retained predominantly by interfacial adsorption on the ionic liquids studied in this work. The solvation characteristics of the ionic liquids were evaluated using the Abraham solvation parameter model.     

Effects of ionic liquid as additive and the pH of the mobile phase on the retention factors of amino benzoic acids in RP-HPLC

As an organic salt, ionic liquids are widely used as new solvent media. In this paper, three positional isomers, such as o-amino benzoic acid, m-amino benzoic acid, and p-amino benzoic acid are separated with four different ionic liquids as additives to the mobile phase using reversed-phase (RP) high-performance liquid chromatography (HPLC). Amino benzoic acids are biologically active substances; the p-isomer is present in a group of water-soluble vitamins and is widely known as a sunscreen agent. The ionic liquids used are 1-butyl-3-methylimidazolium tetrafluoroborate, 1-ethyl-3-methylimidazolium tetrafluoroborate, 1-ethyl-3-methylimidazolium methylsulfate, and 1-octyl-3-methylimidazolium methylsulfate. The effects of the length of the alkyl group on the imidazolium ring and its counterion, the concentrations of the ionic liquid, and the effect of the pH of the mobile phase on the retention factor of the amino benzoic acid isomers are studied. Separation with the ionic liquid in the eluent was better than the separation without the ionic liquid. The pH mainly affected the retention and elution order of the solutes in RP-HPLC.     

Activity coefficients at infinite dilution of organic solutes in the ionic liquid 1-butyl-3-methylimidazolium hexafluoroantimonate using gas–liquid chromatography at T = (313.15, 323.15, and 333.15) K

Activity coefficients at infinite dilution were determined for 27 solutes: n-alkanes, alk-1-enes, alk-1-ynes, cycloalkanes, alkylbenzenes, alcohols, and ketones in the ionic liquid 1-butyl-3-methylimidazolium hexafluoroantimonate, [BMIM][SbF₆], by gas–liquid chromatography at three different temperatures, T = (313.15, 323.15, and 333.15) K. The results are compared to published data on related compounds. The partial molar excess enthalpy values at infinite dilution were calculated from the experimental data over the same temperature range. Selectivities and capacities at infinite dilution were calculated for the hexane/benzene and methanol/benzene systems from experimental infinite dilution activity coefficients and compared to the literature values for related ionic liquids, as well as to data on industrial molecular solvents.     

Activity coefficients at infinite dilution of organic solutes in the ionic liquid 1-ethyl-3-methylimidazolium trifluoromethanesulfonate using gas–liquid chromatography at T = (313.15, 323.15, and 333.15) K

Activity coefficients at infinite dilution were determined for 24 solutes (n-alkanes, alk-1-enes, alk-1-ynes, cycloalkanes, alkylbenzenes, and alcohols) in the ionic liquid 1-ethyl-3-methylimidazolium trifluoromethanesulfonate by gas-liquid chromatography at three different temperatures T = (313.15, 323.15, 333.15) K. The partial molar excess enthalpy values at infinite dilution were calculated from the experimental results over the same temperature range. Selectivities and capacities at infinite dilution for the hexane/benzene and methanol/benzene separation problems were calculated from experimental infinite dilution activity coefficient values. The activity coefficients, enthalpies, selectivities, and capacities are discussed and compared to literature values for other ionic liquids, as well as industrial molecular solvents.     

Abraham model correlations for ionic liquid solvents: computational methodology for updating existing ion-specific equation coefficients

The computational methodology for updating existing values of Abraham model ion-specific equation coefficients is illustrated using published experimental solubility and partition coefficient for solutes dissolved in 1-ethyl-3-methylimidazolium trifluoroacetate, 1-butyl-3-methylimidazolium trifluoroacetate and 1-hexyl-3-methylimidazolium trifluoroacetate. The updated Abraham model ion-specific equation coefficients that are reported for the trifluoroacetate anion are based on 51 experimental values.     

Reversed-phase liquid chromatographic separation of antiretroviral drugs on a monolithic column using ionic liquids as mobile phase additives

The use of 3-methylimidazolium cation-based ionic liquids (ILs) was evaluated as mobile phase additives for separation of antiretroviral drugs on a monolithic column by RP-HPLC. Separation of eight commonly used antiretroviral drugs was achieved on a Chromolith Flash, RP-18e column (25 × 4.6 mm, porous material) using water (pH 4.0 adjusted with acetic acid)/methanol v/v as a mobile phase containing ILs in a gradient elution mode. The effects of concentrations of ILs on retention, resolution and peak shape were studied and a regression equation correlating the interactions between stationary phase and the ILs was established. The retention of all the drugs was decreased notably by using 1-butyl-3-methylimidazolium tetrafluoroborate, while 1-ethyl-3-methylimidazolium methylsulfate reduced gradient drift drastically when compared to triethylamine.     

Experimental measurements of mutual solubility of cyclohexanone,cyclohexene and ionic liquid

This work presents new experimental liquid–liquid equilibrium data for four ternary systems, containing cyclohexanone, cyclohexene and ionic liquids (1-butyl-3-methylimidazolium hexafluorophosphate, 1-butyl-3-methylimidazolium tetrafluoroborate, triethylammonium trifluoromethanesulfonate, 1-ethyl-3-methylimidazolium trifluoromethanesulfonate) at temperature 296.15 K and at atmospheric pressure. Compositions of ternary liquid mixtures were determined using refractometric methods. It was shown that 1-ethyl-3-methylimidazolium trifluoromethanesulfonate and 1-butyl-3-methylimidazolium hexafluorophosphate containing imidazole cations can be considered as solvent for oxidation of cyclohexene to cyclohexanone.     

Activity coefficients at infinite dilution measurements for organic solutes and water in the ionic liquid 1-ethyl-3-methylimidazolium trifluoroacetate

The activity coefficients at infinite dilution, gamma13(infinity) for 29 solutes, alkanes, alkenes, alkynes, cycloalkanes, aromatic hydrocarbons, alcohols and water in the ionic liquid 1-ethyl-3-methylimidazolium trifluoroacetate ([EMIM][TFA]), were determined by gas-liquid chromatography at temperatures from 298.15-368.15 K. The partial molar excess enthalpies at infinite dilution DeltaH1(E,infinity) values were calculated from the experimental gamma13(infinity) values obtained over the temperature range. The selectivities for the hexane/benzene and cyclohexane/benzene separation were calculated from gamma13(infinity) and compared to the literature values for other ionic liquids, NMP and sulfolane.     

Excess molar properties for binary systems of alkylimidazolium-based ionic liquids + nitromethane. Experimental results and ERAS-model calculations

Density, isobaric molar heat capacity, and excess molar enthalpy were experimentally determined at atmospheric pressure for a set of binary systems ionic liquid + nitromethane. The studied ionic liquids were: 1-butyl-3-methylimidazolium tetrafluoroborate, 1-hexyl-3-methylimidazolium tetrafluoroborate, 1-butyl-3-methylpyridinium tetrafluoroborate, 1-ethyl-3-methylimidazolium ethylsulfate, 1-butyl-3-methylimidazolium methylsulfate, 1-ethyl-3-methylimidazolium trifluoromethanesulfonate, and 1-butyl-3-methylimidazolium trifluoromethanesulfonate. Density and heat capacity were obtained within the temperature range (293.15 to 318.15) K whereas excess molar enthalpy was measured at 303.15 K; excess molar volume and excess molar isobaric heat capacity were calculated from experimental data. The ERAS-model was applied in order to study the microscopic mechanisms involved in the mixing process. Although the studied compounds are not self-associated, ERAS-model describe adequately the experimental results if cross-association between both compounds is considered.     

咪唑离子液体对铜在硫酸溶液中的缓蚀作用

采用动电位极化和电化学阻抗谱技术研究了三种新型烷基咪唑离子液体, 1-丁基-3-甲基咪唑硫酸氢盐([BMIM]HSO₄), 1-已基-3-甲基咪唑硫酸氢盐([HMIM]HSO₄), 1-辛基-3-甲基咪唑硫酸氢盐([OMIM]HSO₄), 对铜在0.5 mol·L_-1 H₂SO₄溶液中的缓蚀作用. 实验结果表明: 咪唑离子液体能有效抑制铜在硫酸溶液中的腐蚀, 相同浓度下的缓蚀效率大小顺序为[OMIM]HSO₄>[HMIM]HSO₄>[BMIM]HSO₄. 动电位极化表明三种咪唑化合物的加入对铜的阴阳极腐蚀过程均有抑制作用, 属于混合型缓蚀剂. 电化学阻抗谱用带两个常相位原件的等效电路对含两个时间常数的体系进行拟合, 发现咪唑化合物的添加会引起电荷传递电阻和双电层电容等阻抗参数的变化, 表明此类化合物通过吸附于铜电极与溶液界面起到缓蚀作用, 且这种吸附符合Langmuir吸附等温关系. 吸附过程热力学计算说明咪唑化合物在铜表面发生了自发的物理吸附.     

Osmotic coefficients of binary mixtures of four ionic liquids with ethanol or water at T = (313.15 and 333.15) K

Measurements of osmotic coefficients of BmimCl (1-butyl-3-methylimidazolium chloride) and HmimCl (1-hexyl-3-methylimidazolium chloride) with ethanol and EmimEtSO₄ (1-ethyl-3-methylimidazolium ethylsulfate) and EmpyEtSO₄ (1-ethyl-3-methylpyridinium ethylsulfate) with water at T = (313.15 and 333.15) K are reported in this work. Vapour pressure and activity results of the studied binary systems are obtained from experimental measurements. The results for the osmotic coefficients are correlated using the extended Pitzer model modified by Archer and the modified NRTL (MNRTL) model. The standard deviations obtained with both models are also given. The parameters obtained with the extended Pitzer model of Archer are used to calculate the mean molal activity coefficients.     

Excess enthalpy,density, and heat capacity for binary systems of alkylimidazolium-based ionic liquids + water

Experimental measurements of excess molar enthalpy, density, and isobaric molar heat capacity are presented for a set of binary systems ionic liquid + water as a function of temperature at atmospheric pressure. The studied ionic liquids are 1-butyl-3-methylpyridinium tetrafluoroborate, 1-ethyl-3-methylimidazolium ethylsulfate, 1-butyl-3-methylimidazolium methylsulfate, 1-butyl-3-methylimidazolium trifluoromethanesulfonate, and 1-ethyl-3-methylimidazolium trifluoromethanesulfonate. Excess molar enthalpy was measured at 303.15 K whereas density and heat capacity were determined within the temperature range (293.15 to 318.15) K. From experimental data, excess molar volume and excess molar isobaric heat capacity were calculated. The analysis of the excess properties reveals important differences between the studied ionic liquids which can be ascribed to their capability to form hydrogen bonds with water molecules.     

Activity coefficients at infinite dilution measurements for organic solutes and water in the ionic liquid 1-butyl-3-methylimidazolium trifluoromethanesulfonate

The activity coefficients at infinite dilution, gamma 13 (infinity) for 32 solutes: alkanes, alkenes, alkynes, cycloalkanes, aromatic hydrocarbons, alcohols, thiophene, tetrahydrofurane, tert-butyl methyl ether, and water in the ionic liquid 1-butyl-3-methylimidazolium trifluoromethanesulfonate [BMIM][CF3SO3] were determined by gas-liquid chromatography at the temperatures from 298.15 to 368.15 K. The partial molar excess enthalpies at infinite dilution values Delta H 1 (E,infinity) were calculated from the experimental gamma 13 (infinity) values obtained over the temperature range. The selectivities for the hexane/benzene, cyclohexane/benzene, n-hexane/thiophene, n-decane/thiophene, cyclohexane/thiophene, toluene/thiophene, and oct-1-ene/thiophene separation problems were calculated from the gamma 13 (infinity). Obtained values were compared to the literature values for the other ionic liquids, NMP, and sulfolane.     

Surface orientation of 1-methyl-, 1-ethyl-, and 1-butyl-3-methylimidazolium methyl sulfate as probed by sum-frequency generation vibrational spectroscopy

The orientation of the ions at the surface of ionic liquids has been determined by the surface-sensitive technique sum-frequency generation vibrational spectroscopy. The results indicate that both ions are present at the first layer of the gas-liquid interface. Furthermore, the alkyl chains are found to be extended toward the gas phase and away from the liquid phase. The proposed models for the preferred orientation of the ions are in good agreement in comparison with the results obtained from the recent MD simulation studies. The salts considered here are 1,3-dimethylimidazolium methylsulfate, 1-ethyl-3-methylimidazolium methylsulfate, and 1-butyl-3-methylimidazolium methylsulfate.     

Association of methanol and water in ionic liquids elucidated by infrared spectroscopy using two-dimensional correlation and multivariate curve resolution

Water and methanol associations in ionic liquids (ILs) have been studied by means of FTIR spectroscopy. Spectra at different concentrations of water or methanol in ILs were obtained by means of on-line dilution using a flow injection analysis system. Spectral features in the OH stretching region revealed that most of the water and methanol molecules tended to be isolated from each other and to interact with the anion of the IL via H bonding. By means of two-dimensional correlation spectroscopy, the formation of methanol and water dimers was also detected. Multivariate curve resolution was used to recover pure spectra and concentration profiles of the different species. Methanol dimers form at concentrations higher than 0.8% (w/w) in the three studied ILs, 1-ethyl-3-methylimidazolium tetrafluoroborate (emimBF4), 1-butyl-3-methylimidazolium tetrafluoroborate (bmimBF4), and 1-butyl-3-methylimidazolium hexafluorophosphate (bmimPF6). Self-association of water molecules takes place in emimBF4 and bmimBF4 at a molar ratio similar to that of methanol molecules; however, water dimers cannot be detected in bmimPF6, the most hydrophobic IL studied. No evidence was found that bigger water clusters are formed in these ILs at the studied cosolvent concentrations.