Chromatographic characterization of molecularly imprinted polymers

Recent efforts in the investigation of chromatographic characterization of molecularly imprinted polymers (MIPs) have focused mainly on the nature of heterogeneous binding sites. More data on the thermodynamics than on the kinetic features of MIP columns have been published. The present article addresses the sources of peak broadening and tailing, which are the main drawbacks often associated with imprinted polymers in chromatography for practical applications. With use of the theory of nonlinear chromatography, the peak properties of a MIP column, including the retention and peak broadening and tailing, can be well interpreted. Efforts to improve chromatographic efficiency using MIPs prepared by approaches different from the conventional method, including covalent imprinting and the format of uniformly sized spherical microbeads, are reviewed and discussed. This review leads to the conclusion that nonlinear chromatography theory is useful for characterizing chromatographic features of MIP columns, since a MIP is essentially an affinity-based chromatographic stationary phase. We expect more theoretical and experimental studies on the kinetic aspects of MIP columns, especially the factors influencing the apparent rate constant, as well as the analysis of the influences of mobile-phase composition on the chromatographic performance. In addition to revealing the affinity interaction by molecular recognition, slow nonspecific interactions which may be inherited from the imperfect imprinting and may be involved in the rebinding of the template to MIPs also need to be characterized. Figure The peak broadening and tailing associated often with molecularly imprinted polymers (MIPs) in column chromatography for practical applications can be well characterized by the theory of nonlinear chromatography.     

Preparation and characterization of molecularly imprinted microspheres for dibutyl phthalate recognition in aqueous environment

Molecularly imprinted microspheres (MIMs) were prepared by suspension polymerization for the binding and recognition of dibutyl phthalate (DBP). DBP was used as the template molecule, methacrylic acid as the functional monomer, ethylene dimethacrylate (EDMA) as the linking agent, PVA as the dispersing agent, and Span 60 as the surfactant. The MIMs were characterized with electron microscope scanning and rebinding experiments. The Scatchard plot revealed that the template‐polymer system has a two‐site binding behavior with dissociation constants of 4.05 and 0.515 mmol/L. The MIMs exhibited the highest selective rebinding to DBP at 736.85 μg/g. The recoveries of the MIM‐SPE column for DBP extraction was 94.75–101.9% with the RSD of 1.5–7.3%, indicating the feasibility of the prepared MIMs for DBP extraction. Finally, the method developed was used to analyze the trace levels of phthalate in aqueous environment samples.     

大黄酸分子印迹聚合物微球的制备及特性

以聚苯乙烯微球为种球,大黄酸为模板分子,采用单步溶胀聚合法在N,N-二甲基甲酰胺体系中制备了单分散分子印迹聚合物微球.用扫描电镜对微球的结构和形貌进行了表征,并研究了微球的制备条件和吸附特性.微球的凹槽可有效地增加微球的比表面积和结合位点,从而提高了模板分子的结合速率及微球的印迹容量.     

Synthesis and characterization of azoxystrobin hydrophilic molecularly imprinted microspheres

Abstract

In this research, hydrophilic molecularly imprinted microspheres (HMIPs) for azoxystrobin were successfully synthesized through precipitation polymerization. The adsorption capacities of HMIPs for azoxystrobin in water medium were higher than ordinary molecularly imprinted microspheres (MIPs), and HMIPs exhibited good hydrophilic properties. HMIPs and non-imprinted microspheres (HNIPs) were characterized by FT-IR, SEM, laser particle size analyzer and TGA. Comparing with HNIPs, azoxystrobin had a significant influence on morphologys and sizes of HMIPs. The Langmuir adsorption isotherm illustrated each binding site of HMIPs had the same adsorption capacity. The Lagergran pseudo-second-order kinetic model indicated the adsorption process between azoxystrobin and HMIPs was chemical adsorption. BET test illustrated HMIPs had bigger specific surface areas than HNIPs. Selective adsorption indicated that HMIPs had highly specific recognition of azoxystrobin. HMIPs successfully exhibited high selectivity and high hydrophilicity in water medium.     

Synthesis and characterization of photo‐responsive magnetic molecularly imprinted microspheres for the detection of sulfonamides in aqueous solution

A dual responsive molecularly imprinted polymer sensitive to both photonic and magnetic stimuli was successfully prepared for the detection of four sulfonamides in aqueous media. The photoresponsive magnetic molecularly imprinted polymer was prepared by surface imprinting polymerization using superparamagnetic Fe₃O₄ nanoparticles functionalized with a silica layer as a support, water‐soluble 4‐[(4‐methacryloyloxy)phenylazo]benzenesulfonic acid as the functional monomer, and sulfadiazine as the template. The magnetic molecularly imprinted polymers showed specific affinity to sulfadiazine and its structural analogs in aqueous media. Upon alternate irradiation at 365 and 440 nm, the quantitative bind and release of the four sulfonamides by magnetic molecularly imprinted polymers occurred. Furthermore, the prepared magnetic molecularly imprinted polymers were used as solid‐phase extraction material selectively extracted the four sulfonamides from water samples with good recoveries. Thus, a simple, convenient, and reliable detection method for sulfonamides in the environment based on responsive magnetic molecularly imprinted polymers was successfully established.     

Chromatographic characterization of molecularly imprinted polymers binding the herbicide 2,4,5-trichlorophenoxyacetic acid

Two polymers binding the herbicide 2,4,5-trichlorophenoxyacetic acid (2,4,5-T) were prepared by utilising the technique of the non-covalent molecular imprinting polymerisation in an aqueous medium. The polymers obtained were packed in HPLC columns and the effects of the mobile phase composition on the retention of the imprinting molecule and the selectivity of the stationary phases towards several analogous structures were studied by liquid chromatography. The columns showed a good level of selectivity towards the template and strictly related molecules. It was found that the molecular recognition mechanism acting on the columns was dependent on a combination of ion pair and hydrophobic interactions.     

Coating lysozyme molecularly imprinted thin films on the surface of microspheres in aqueous solutions

The polymerization of 3‐aminophenylboronic acid in an aqueous environment was used for the first time to modify polystyrene microspheres for protein (lysozyme) molecular imprinting. Polystyrene microspheres were prepared by styrene polymerization in an aqueous emulsion with poly(vinyl alcohol) as a surfactant. Poly(3‐aminophenylboronic acid) was then grafted onto the surface of the polystyrene microspheres through oxidation by ammonium persulfate in an aqueous solution in the presence or absence of lysozyme or hemoglobin. Rebinding experiments were conducted to establish the equilibrium time and to detect the specific binding capacity and selective recognition. The results indicated that the microspheres, imprinted by the template protein lysozyme or hemoglobin, possessed specific recognition sites on the shells and had a high specific binding capacity for template proteins. The imprinted particles did not need to be ground or sieved and could easily reach the adsorption equilibrium, thus avoiding some problems of the bulk polymer. All these results demonstrate that the particles have potential applications as substitutes for bulk polymers in biological macromolecular affinity studies. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1911–1919, 2007     

Differential pulse voltammetric determination of trace rotenone using molecularly imprinted polymer microspheres

A new voltammetric method for the determination of rotenone is described. It is based on the reduction of an electroactive derivative of rotenone on the surface of an electrode. Rotenone in water was pre-concentrated using a new type of molecularly imprinted polymer microspheres and can react with hydrazine chloride to produce the electroactive derivative. The experimental conditions were discussed. Under optimum conditions, it was found that the peak potential (Ep) of the derivative of rotenone is ?1.02 V (vs. Ag/AgCl). Using the proposed procedure rotenone can be determined in the range 0.2–400 μg L^?1. The detection limit for rotenone is 0.1 μg L^?1 and the relative standard deviation for 100 μg L^?1 rotenone is 1.99 %. The method was applied to the determination of rotenone in water samples with satisfactory results.     

Surface molecularly imprinted magnetic microspheres for the recognition of albumin

A new approach, combining metal coordination with the molecular imprinting technique, was developed to prepare affinity materials. Magnetic poly(glycidyl methacrylate) microspheres in monosize form were used for specific recognition toward the target protein. The magnetic poly(glycidyl methacrylate) microspheres were prepared by dispersion polymerization in the presence of magnetite nanopowder. Surface imprinted magnetic poly(glycidyl methacrylate) microspheres based on metal coordination were prepared and used for the selective recognition of human serum albumin. Iminodiacetic acid was used as the metal coordinating agent and human serum albumin was anchored by Cu²⁺ ions on the surface of magnetic poly(glycidyl methacrylate) microspheres by metal coordination. The magnetic poly(glycidyl methacrylate) microspheres were coated with a polymer formed by condensation of tetraethyl orthosilicate and 3‐aminopropyltrimethoxysilane. The human serum albumin imprinted magnetic poly(glycidyl methacrylate) microspheres were characterized by scanning electron microscopy, attenuated total reflectance Fourier transform infrared spectroscopy and particle size analysis. The maximum adsorption capacity of human serum albumin imprinted magnetic poly(glycidyl methacrylate) microspheres was 37.7 mg/g polymer at pH 6.0. The selectivity experiments of human serum albumin imprinted magnetic poly(glycidyl methacrylate) microspheres prepared with different concentrations in the presence of lysozyme, bovine serum albumin and cytochrome C were performed in order to determine the relative selectivity coefficients.     

Synthesis,characterization and application of dummy-template molecularly imprinted microspheres for 2,4-d butyl ester

Dummy-template molecularly imprinted microspheres were synthesized via precipitation polymerization employing 2,4-D isooctyl ester as the template molecule instead of 2,4-D butyl ester, while methacrylic acid and divinylbenzene were used as functional monomer and cross-linker in acetonitrile or a mixture of acetonitrile and toluene. The microspheres were characterized by scanning electron microscopy, laser particle size analyzer and fourier transform infrared spectrometry. Binding capacity experiment showed that the molecularly imprinted polymers prepared in a mixture of acetonitrile and toluene had a high binding capacity. The performance of microspheres was further assessed by equilibrium binding and kinetic adsorption experiments. The results showed that the apparent maximum adsorption reached up to 1.35 mg·g^?1 within 10 min. Based on the dummy-template microspheres, a molecularly imprinted solid phase extraction-gas chromatography method was developed for the selective analysis of 2,4-D butyl ester in soil samples. The mean recoveries of 2,4-D butyl ester from blank soil samples ranged from 85.9 to 99.3% with relative standard deviations of 4.5–14.3% (n = 5). The limit of detection and the limit of quantification of 2,4-D butyl ester were 0.8 μg·kg^?1 and 2.3 μg·kg^?1, respectively.     

Preparation and characterization of a novel molecularly imprinted polymer for the separation of glycyrrhizic acid

Molecularly imprinted polymers of glycyrrhizic acid were prepared by solution polymerization using glycyrrhizic acid as the template molecule, N‐vinypyrrolidone as functional monomer, N ,N‐methylene bisacrylamide as cross‐linker and ascorbic acid and hydrogen peroxide as initiators. Focused on the adsorption capacity and separation degree of the polymer to glycyrrhizic acid, the effects of the monomers, crosslinker and initiators were investigated and optimized. Finally, the structure of the polymer was characterized by using Fourier transform infrared spectroscopy and scanning electron microscopy. To obtain objective results, non‐imprinted molecular polymers prepared under the same conditions were also characterized. The adsorption quantity of the polymer was measured by high‐performance liquid chromatography. Under the optimum conditions, the maximum adsorption capacity of glycyrrhizic acid approached 15 mg/g, and the separation degree was as high as 2.5. The adsorption kinetics could be well described by a pseudo‐first‐order model, while the thermodynamics of the adsorption process could be described by the Langmuir model.     

Chromatographic behavior of silica-polymer composite molecularly imprinted materials

Molecularly imprinted polymers (MIP) have recently been prepared inside the pores of silica based HPLC packing materials. Detailed physical and chromatographic characterization of such a silica-MIP composite material is presented. The chromatographic peak shape obtained with the uniformly sized spherical silica-MIP composite is mainly determined by the nonlinear adsorption isotherm. Comparison of the composite with the conventional sieved and grinded bulk MIP is therefore based on the nonlinear isotherm and not on retention factors and plate numbers.     

Separation and determination of the antitumor drug piritrexim by molecularly imprinted microspheres in high-performance liquid chromatography

Molecularly imprinted microspheres were synthesised using the antitumor drug piritrexim (PTX) as a template molecule by aqueous microsuspension polymerisation and were used as a high-performance liquid chromatographic stationary phase. The molecularly imprinted column exhibited strong retention behaviour to the template molecule. The influences of pH of the buffer and the ratio of methanol to buffer on the retention behaviour were investigated in detail. Results indicated that the baseline separation of PTX, trimetrexate (TMX), trimethoprim (TMP) and sulfamethazine (SMZ) was achieved when the pH value of the acetate buffer was above pH 3.5 and the ratio of methanol to the buffer was 6:4 (v/v). A gradient elution programme was employed to enhance the separation, which led to an improvement in sensitivity and a reduction in determination errors. The method developed was used to analyse urine samples supplemented with PTX. The recoveries of 5 g mL^–1 PTX in the urine sample were 99.1±3.0% and 93.3±2.8% at the beginning and 24 h later, respectively.     

Preparation and characterization of molecularly imprinted microspheres for selective extraction of trace melamine from milk samples

We describe molecularly imprinted microspheres (MIMs) for the selective extraction of melamine from milk. The MIMs were made from melamine as the template molecule, methacrylic acid as the functional monomer, and ethylene glycol dimethacrylate as the linking agent. The MIMs were synthesized by suspension polymerization and characterized by rebinding experiments. They displayed high adsorption capacity, fast rebinding kinetics, and highly specific rebinding of melamine. The imprinting factor is 4.1. Scatchard analysis revealed a one-type rebinding behavior, the dissociation constant and maximum rebinding capacity being 37.59 g L^?1 and 30.85 μmol g^?1, respectively. The MIMs exhibited a 25% cross-reactivity towards atrazine, but less than 3.0% towards prometryn, clenbuterol and metronidazole. In addition, a MIM-based solid phase extraction (MISPE) column for melamine was prepared by packing MIMs into a common SPE cartridge. The MISPE extraction gave recoveries of 89.8 to 100.6% of melamine, with relative standard deviations of 5.9 to 7.5%. There was no significant loss of rebinding capacity after more than 60 repeated uses, thus demonstrating the high stability of the MISPE column. The MSPE column also was applied to the extraction of melamine from spiked liquid and powdered milk with satisfying accuracy and precision.

A molecularly imprinted polymer for the determination of neopterin

A molecularly imprinted polymer (MIP) for the specific retention of neopterin has been developed. A set of 6 polymers was prepared by radical polymerization under different experimental condition using methacrylic acid as functional monomer and ethylene glycol dimethacrylate as crosslinker, with the aim to understand their influence on the efficiency of the MIP. The performance of each MIP was tested in batch experiments via their binding capacity. The MIP prepared in the presence of nickel ions in dimethylsulfoxide-acetonitrile mixture (P4) exhibited the highest binding capacity for neopterin (260 μmol per gram of polymer). A selectivity study with two other pteridines demonstrated the polymer P4 also to possess the best selectivity.

A molecularly imprinted polymer for the specific retention of neopterin was developed. A set of 6 polymers was prepared under different experimental condition. The performance of each MIP was tested through their binding capacity. The MIP P4 prepared in the presence of nickel ions exhibited the highest binding capacity

     

A molecularly imprinted polymer for the determination of neopterin

A molecularly imprinted polymer (MIP) for the specific retention of neopterin has been developed. A set of 6 polymers was prepared by radical polymerization under different experimental condition using methacrylic acid as functional monomer and ethylene glycol dimethacrylate as crosslinker, with the aim to understand their influence on the efficiency of the MIP. The performance of each MIP was tested in batch experiments via their binding capacity. The MIP prepared in the presence of nickel ions in dimethylsulfoxide-acetonitrile mixture (P4) exhibited the highest binding capacity for neopterin (260 μmol per gram of polymer). A selectivity study with two other pteridines demonstrated the polymer P4 also to possess the best selectivity.

A molecularly imprinted polymer based on multiwalled carbon nanotubes for separation and spectrophotometric determination of L-cysteine

The authors describe a molecularly imprinted polymer (MIP) deposited on multiwalled carbon nanotubes (MIP/MWCNTs) for separation and preconcentration of L-cysteine (L-Cys). The MIP was characterized by scanning electron microscopy, X-ray diffraction and FT-IR and via adsorption kinetics and adsorption isotherms. The MIP is shown to be a viable sorbent for L-Cys which subsequently is quantified by spectrophotometry through formation of a charge transfer complex with the DDQ reagent. The experimental parameters affecting separation efficiency and spectrophotometric determination were optimized. Under optimum conditions and at an analytical wavelength of 478 nm, the calibration plot is linear in the 4.0 to 180 ng mL^?1 concentration range, and the limit of detection (at an S/N ratio of 3) is 2.3 ng mL^?1. The intra-day and inter-day precision are in the range from 2.4 to 3.6%. The method was successfully applied to determination of L-Cys in spiked human serum and water samples where it gave recoveries ranging from 96.6 to 102.4%.

Open image in new window

Graphical abstract Schematic of the preparation of a  molecularly imprinted polymer coated on the multiwalled carbon nanotube (MIP/MWCNT) by functionalization of MCNTs with methacrylic acid and subsequent polymerization. The MIP/MWCNTs were successfully applied for extraction and spectrophotometric determination of L-Cys by charge transfer (CT) complexation.