Molecular Structure and Conformations of Chloral (CCl3CHO) in the Ground and Lowest Triplet States

This paper reports on an ab initio quantum mechanical calculation of the structure of the conformationally nonrigid chloral (CCl₃CHO) molecule in the ground (S₀) and lowest excited triplet (T₁) states. Electronic excitation causes substantial changes in molecular geometry: the CCl₃ top is rotated, and the carbonyl (CCHO) fragment becomes nonplanar. For the torsional (S₀ and T₁) and inversion (T₁) nuclear vibrations, one- (S₀ and T₁) and two-dimensional (T₁) vibrational problems are solved; a relationship is found between the torsional and inversion vibrations in the T₁ state. The results are compared with the data of analogous calculations for the acetaldehyde molecule in the T₁ state.     

One- and Two-Dimensional Torsion-Inversion Models for the Fluoral Molecule (CF3CHO) in Excited Electronic States

The structure of the conformationally nonrigid fluoral molecule (CF₃CHO) in the ground (S₀) and lowest excited triplet (T₁) and singlet (S₁) electronic states was studied by ab initio quantum-chemical methods. The equilibrium geometric parameters and harmonic vibrational frequencies of the molecule in these electronic states were determined. The calculations demonstrated that the electronic excitation causes substantial changes in the molecular structure involving the rotation of the CF₃ top and the deviation of the CCHO carbonyl fragment from planarity. The quantum-mechanical problems for large-amplitude vibrations, namely, for the torsional vibration in the S₀ state and the torsional and inversion vibrations (nonplanar carbonyl fragment) in the T₁ and S₁ states, were solved in the one- and two-dimensional approximations. A comparison of the results of calculations revealed the correlation between the torsional and inversion motions.     

Molecular Structure of Chloral (CCl3CHO) in the Lowest Excited Singlet State

The structure and the conformational behavior of the chloral CCl₃CHO molecule in the lowest excited singlet state (S₁) was investigated by CASSCF and CI ab initio quantum-chemical methods. It is shown that electronic excitation S₁S₀ causes significant changes in the molecular structure, namely, CCl₃ top rotation and pyramidalization of the carbonyl (CCHO) fragment. A relationship between the torsional and inversion vibrations of chloral in the S₁ state has been found. For large-amplitude nuclear motions corresponding to the torsional and inversion vibrations, the corresponding one- and two-dimensional problems were solved. The results are compared with the experimental data and with the results of previous calculations for the lowest excited triplet (T₁) state.     

Structure of acetyl chloride molecule isotopomers CH<Subscript>3</Subscript>COCl and CD<Subscript>3</Subscript>COCl in the ground and lowest excited singlet and triplet electronic states: a quantum mechanical study

The structures of isotopomers of conformationally flexible acetyl chloride molecule, CH₃COCl and CD₃COCl, in the ground (S₀ and lowest excited singlet (S₁) and triplet (T₁) electronic states were calculated by the RHF, MP2, and CASSCF methods. The equilibrium geometric parameters and harmonic vibrational frequencies of the molecules in these electronic states were estimated. According to calculations, electronic excitation causes considerable conformational changes involving rotation of the CH₃ (CD₃) top and a substantial deviation of the CCOCl fragment from planarity. The results of calculations agree with experimental data. Two dimensional torsional inversion sections of the potential energy surface were calculated and analyzed. Vibrational problems for large amplitude vibrations (torsional vibration in the S₀ state and both torsional and inversion vibrations in the T₁ and S₁ states) were solved in one- and two-dimensional approximations.__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 62–70, January, 2005.     

Exploring the Reaction Paths on the Potential Energy Surfaces of the S1 and T1 States in Methylenecyclopropane

The reaction paths of methylenecyclopropane 1 on the potential energy surfaces (PESs) of the lowest triplet (T₁) state and the lowest excited singlet (S₁) state, as well as that of the ground state (S₀), were explored by using the nudged elastic band method at the MRMP2//MCSCF/6‐31++G(d,p) and DFT(B3LYP)/6‐31++G(d,p) levels of theory. After vertical excitation of 1, three transition states on the PES of the lowest triplet state and one transition state on the S₁ PES were found along the reaction path to produce a carbene, cyclobutylidene 2. All of these transition states are lower in energy than the S₁ state produced by vertical excitation at the S₀ energy minimum in 1. Fast transition is predicted to occur from the T₁ state or from the S₁ state to the S₀ state due to strong spin‐orbit coupling or nonadiabatic coupling in the geometrical vicinity of 2. On the MRMP2 S₀ PES, the energy barriers of 5.0, 10.3 and 13.5 kcal mol^?1 were obtained for C migration reaction (backward reaction), 1,2‐H migration reaction to cyclobutene 3, and 1,3‐H migration reaction to bicyclopropane 4, respectively, started at 2. The introduction of phenyl groups makes the energy barriers smaller due to the π conjugation between the carbene center and phenyl groups.     

Multireference Calculation of the Photodissociation of Benzyl Chloride

The photodissociation mechanism of benzyl chloride （BzCl） under 248 nm has been investigated by the complete active space SCF （CASSCF） method by calculating the geometries of the ground （S0） and lower excited states, the vertical （Tv） and adiabatic （T0） excitation energies of the lower states, and the dissociation reaction pathways on the potential energy surfaces （PES） of SI, TI and T2 states. The calculated results clearly elucidated the photodissociation mechanism of BzCl, and indicated that the photodissociation on the PES of T1 state is the most favorable.     

Ab initio study of the structure and conformations of 2-fluoroethanal in the ground and lowest excited electronic states

The structure of the conformationally flexible 2-fluoroethanal molecule (CH₂FCHO, FE) in the ground (S₀) and lowest excited triplet (T₁) and singlet (S₁) electronic states was investigated by ab initio quantum-chemical methods. The FE molecule in the S₀ state was found to exist as two conformers, viz., as cis (the F—C—C—O angle is 0°) and trans (the F—C—C—O angle is 180°) conformers. On going both to the T₁ and S₁ states, the FE molecule undergoes substantial structural changes, in particular, the CH₂F top is rotated with respect to the core and the carbonyl CCHO fragment becomes nonplanar. The potential energy surfaces for the T₁ and S₁ states are qualitatively similar, viz., six minima in each of the excited states of FE correspond to three pairs of mirror-symmetrical conformers. Based on the potential energy surfaces calculated for the FE molecule in the T₁ and S₁ states, the one-dimensional problems on the torsion and inversion nuclear motions as well as the two-dimensional torsion-inversion problems were solved.     

S 1 ←S 0 vibronic spectrum and the structure of the chloral molecule in theS 1 stateS 0 vibronic spectrum and the structure of the chloral molecule in theS 1 state

The vibronic absorption spectrum of chloral (CCl₃COH) vapors is studied in the region of S₁ ← S₀ electron transition (32,000–28,700 cm⁻¹). The 29,070 cm⁻¹ vibronic transition (not observed because of low intensity) is believed to be the ‘start’ of the electron transition. Several fundamentals are found in the S₀ and S₁ states. Inversion splitting of the zero vibrational level in the S₁ state of chloral, indicating a nonplanar structure of the carbonyl fragment, is found. The intensity ratio of the torsional transition bands indicates that the S₁ ← S₀ electronic excitation of the chloral molecule causes significant changes in the orientation of the −CCl₃ group relative to the molecular framework. The potential functions of internal rotation (S₀ and S₁ states) and inversion (S₁ state) of the chloral molecule are determined from experimental data. The potential barriers of internal rotation (S₀ and S₁ states) and inversion (S₁ state) are 380, 780, and 760 cm⁻¹ (4.5, 9.3, and 9.1 kJ/mole), respectively. M. V. Lomonosov Moscow State University. Translated fromZhurnal Strukturnoi Khimii, Vol. 39, No. 3, pp. 507–513, May–June, 1998.     

Comparative analysis of the vibrational structure of the absorption spectra of acrolein in the excited (<Emphasis Type="Italic">S</Emphasis><Subscript>1</Subscript>) electronic state

The assignments of absorption bands of the vibrational structure of the UV spectrum are compared with the assignments of bands obtained by the CRDS method in a supersonic jet from the time of laser radiation damping for the trans isomer of acrolein in the excited (S ₁) electronic state. The ν_00trans = 25861 cm⁻¹ values and fundamental frequencies, including torsional vibration frequency, obtained by the two methods were found to coincide in the excited electronic state (S ₁) for this isomer. The assignments of several absorption bands of the vibrational structure of the spectrum obtained by the CRDS method were changed. Changes in the assignment of (0-v′) transition bands of the torsional vibration of the trans isomer in the Deslandres table from the ν_00trans trans origin allowed the table to be extended to high quantum numbers v′. The torsional vibration frequencies up to v′ = 5 were found to be close to the frequencies found by analyzing the vibrational structure of the UV spectrum and calculated quantum-mechanically. The coincidence of the barrier to internal rotation (the cis-trans transition) in the one-dimensional model with that calculated quantum-mechanically using the two-dimensional model corresponds to a planar structure of the acrolein molecule in the excited (S ₁) electronic state.     

S1←S0 vibronic spectrum and structure of fluoral in the S1 state

The vibronic absorption spectrum of fluoral vapor was studied in the region of the S₁←S₀ electronic transition (313–360 nm). The origin O₀ ⁰⁺) of the transition (29419 cm⁻¹) and a number of fundamental frequencies in the S₀ and S₁ states were determined. The character of intensity distribution in the spectral bands indicates that the electronic excitation leads to significant change of the CF₃ group orientation relative to the molecular frame. Moreover, it was found that the carbonyl fragment of the molecule in the S₁ state has pyramidal structure (in contrast, the carbonyl fragment of the fluoral molecule in the S₀ state is planar). The experimental torsion and inversion energy levels were used for the calculation of internal rotation and inversion potential functions of fluoral molecule in the S₁ state. The potential barriers to internal rotation and inversion were found to be 1270 cm⁻¹ (15.2 kJ mol⁻¹) and 550 cm⁻¹ (6.6 kJ mol⁻¹), respectively. The conformational changes caused by S₁←S₀ electronic excitation in the fluoral molecule are similar to those observed in acetaldehyde and biacetyl molecules and differ from the conformational behavior of hexafluorobiacetyl molecule. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 294–299, February, 1998.     

Ab initio study of the structure of 2,2-difluoroethanal in the ground and lowest excited triplet electronic states

The molecular structure of 2,2-difluoroethanal (DFE) in the ground (S₀) and lowest excited triplet (T_i) electronic states was investigated byab initio quantum-chemical methods. In the S₀ state, the DFE molecule exists as the only stablecis conformer. The T_i↓S₀ electronic excitation is accompanied by the rotation of the top and the deviation of the carbonyl fragment from planarity. For the DFE molecule in the T_i state, six minima corresponding to three pairs of enantiomers were found on the potential energy surface. Based on this potential energy surface, the problems on torsion and inversion nuclear motions were solved in the one- and two-dimensional approximations, and the interaction between these motions was revealed. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 989–995, June, 2000.     

Quantum-chemical study of the photoisomerization and photocyclization reactions of styrylquinolines: Potential energy surfaces

The cross sections of potential energy surfaces (PES) for the S₀ and S₁ states were calculated by the semiempirical PM3 and PM3-CI (8 × 8) methods, respectively, along the reaction coordinate of the isomerization and cyclization of 2- and 4-styrylquinolines (SQ). The PES of the S₀ state exhibits three minima separated by the transition-state barriers of isomerization and cyclization corresponding to three isomeric SQ forms, the E- and Z-isomers and the dihydrogenated cyclic product. On the PES of the S₁ state, the “perpendicular minimum” at dihedral angle values of ～ 90° corresponds to the transition state of the isomerization reaction and the pericyclic minimum with a distance of 1.7–2.0 Å between the atoms involved in cyclization corresponds to the transition state of the cyclization reaction. With simultaneous scanning of the PES of the S₁ state along the isomerization and cyclization reaction coordinates, the minimal-energy path was found for 4SQ, which makes it possible to explain the formation of the photocyclization product in the single-photon process upon irradiation of the E-isomer. It was found that the PM3 method overestimates the stability of the structures in which the aromatic ring is oriented perpendicular to the plane of the molecule, resulting in virtual minima on the PES of the S₁ states.     

The S1 ← S0 vibronic spectra and structure of the (CH3)2 CHCHO and (CH3)2 CHCDO 2-methylpropanal molecules

A multipass cell with an optical path up to 120 m long was used to measure the vibronic absorption spectra of 2-methylpropanal-h₁ (MPA-h₁, (CH₃)₂CHCHO)) and 2-methylpropanal-d₁ (MPA-d₁, (CH₃)₂CHCDO)) over the frequency range 28200–31600 cm⁻¹. The most intense spectral lines were assigned to transitions from vibrational levels of the cis and gauche MPA-h₁ and MPA-d₁ conformers in the ground electronic state (S ₀) to vibrational levels of conformers 1 and 3 in the lowest singlet excited electronic state (S ₁). According to our estimates, the origins (0 ₀ ⁰ ) of the 1 S ₁) ← cis(S ₀) and 3(S ₁) ← cis(S ₀) and also 1(S ₁) ← gauche(S ₀) and 3(S ₁) ← gauche(S ₀) electronic transitions were situated at 29147 and 29177, 29391 and 29417 cm⁻¹, respectively, for MPA-h₁ and at 29226 and 29240, 29480 and 29500 cm⁻¹ for MPA-d₁. The structure of conformers 1 and 3 in the S ₁ state was shown to differ from the structure of the cis and gauche conformers in the S ₀ state by the angle of rotation of the (CH₃)₂CH-isopropyl top and “pyramidal distortion” of the CCHO/CCDO carbonyl fragment. A series of fundamental frequencies of MPA conformers in different electronic states were found. The potential functions of inversion were determined for the conformer 1-conformer 3 pairs of MPA-h₁ and MPA-d₁ from the experimental energy levels of inversion vibrations. The potential barriers to inversion and equilibrium displacements of the CH/CD bond out of the CCO plane were found to be 735/675 cm⁻¹ and ±34°/±32° for MPA-h₁ and MPA-d₁, respectively. Original Russian Text ? I.A. Godunov, S.L. Lur’e, N.N. Yakovlev, V.A. Bataev, 2007, published in Zhurnal Fizicheskoi Khimii, 2007, Vol. 81, No. 1, pp. 52–62.     

Quantum-chemical investigation of the formation of 1,3-diiodoacetone at the photoinitiated disproportionation of 1-iodoacetone

In the framework of ab initio and DFT methods potential energy surfaces (PES) of 1-iodoacetone disproportionation S₀, T₁, and S₁ were investigated. The first stage of the reaction proceeds in the S1 state and leads to the formation of a bimolecular system involving 1,3-diiodoacetone and acetone enol form. The subsequent enol-ketone rearrangement with a high probability occurs in the ground state.     

Does one‐photon photocyclization of trans‐diarylethylenes involve adiabatic trans‐to‐cis photoisomerization? potential energy surface calculations for 1‐styrylnaphthalene

Potential energy surface (PES) for 1‐styrylnaphthalene was calculated by PM3 method for the S₀ state and PM3‐CI(2x2) method with configuration interaction for the S₁ state. Scanning PES along both isomerization and cyclization reaction coordinates enabled to reveal the minimum energy path (MEP) with low barriers on the S₁ PES from E‐isomer to dihydrocyclophotoproduct (DHP). This is consistent with formation of the photocyclization product in one‐photon process during irradiation of E‐isomer. Additionally, the MEP was found to bypass the coordinate region of Z‐isomer, i.e. one‐photon E‐isomer‐to‐DHP photocyclization does not demand participation of the excited Z‐isomer. Therefore, adiabatic trans‐to‐cis isomerization is likely not an intermediate stage on the E‐isomer photocyclization pathway, and experimentally observed one‐photon formation of the DHP from the E‐isomer is likely not an evidence for adiabatic trans‐to‐cis photoisomerization, as it is usually assumed. According to the results obtained, two photochemical reactions of E‐isomer, photoisomerization to Z‐isomer and photocyclization to DHP, are not consecutive but parallel reactions with branching at perpendicular conformer on the S₁ PES. © 2012 Wiley Periodicals, Inc.     

From torsional spectra to Hamiltonians and dynamics: effects of coupled bright and dark states of 9-(N-carbazolyl)-anthracene

The torsional dynamics of the 9-(N-carbazolyl)-anthracene (C9A) molecule is investigated by means of time-independent (1) and time-dependent (2) quantum-mechanical simulations in a diabatic representation. The study includes effects of surface crossing of the brightS ₁ state with a dark state. (1) The intensity pattern of theS ₀ S ₁ fluorescence excitation spectrum is used to fit an effective one-dimensional Hamiltonian with a single-minimum potential for the dark state together with diabatic couplings to the double well potential of the bright state. (2) Based on this Hamiltonian, first predictions for a pump-probe scheme are made. In the pump process the molecules are excited to theS ₁ state followed by competing torsions in the bright state and diabatic curve crossings to the dark state, depending on the pump frequency. Assuming the probe process to be an ionization from the bright state, the interfering effects of the dark state on the dynamics in the bright state can be monitored in a directly time-dependent way on a fs-ps time scale.     

Structure and conformational dynamics of the cyclopropanecarbaldehyde molecule in the ground (S<Superscript>b0</Superscript>) and lowest excited (T<Superscript>b1</Superscript> and S<Superscript>b1</Superscript>) electronic states

The structure and conformational dynamics of nonrigid cyclopropanecarbaldehyde (CPCA) molecule in the ground (S^b0) and lowest excited triplet (T^b1) and singlet (S^b1) electronic states were calculated using the MP2, DFT, CASSCF, CASPT2, and CCSD quantum chemical methods. According to ab initio calculations, in the S^b0 electronic state there are two symmetrical (cis and trans) conformers of the CPCA molecule. Excitation of the CPCA molecule to the ?1 and S1 electronic states causes significant structural changes: carbonyl CCHO fragment becomes nonplanar, cyclopropane fragment rotates around the C–C bond, thus changing the relative positions of the formyl and cyclopropane fragments. Using sections of the potential energy surfaces (PES) of the CPCA molecule in the T^b1 and S^b1 states, we calculated the torsion and inversion wave functions and vibrational transition energies. The results obtained suggest a strong coupling of the torsion and inversion motions in the T^b1 and S^b1 excited states.     

Femtochemistry of trans‐Azomethane: A Combined Experimental and Theoretical Study

The dissociation dynamics of trans‐azomethane upon excitation to the S₁(n,π*) state with a total energy of 93 kcal mol^?1 is investigated using femtosecond‐resolved mass spectrometry in a molecular beam. The transient signal shows an opposite pump–probe excitation feature for the UV (307 nm) and the visible (615 nm) pulses at the perpendicular polarization in comparison with the signal obtained at the parallel polarization: The one‐photon symmetry‐forbidden process excited by the UV pulse is dominant at the perpendicular polarization, whereas the two‐photon symmetry‐allowed process initiated by the visible pulse prevails at the parallel polarization. At the perpendicular polarization, we found that the two C? N bonds of the molecule break in a stepwise manner, that is, the first C? N bond breaks in ≈70 fs followed by the second one in ≈100 fs, with the intermediate characterized. At the parallel polarization, the first C? N bond cleavage was found to occur in 100 fs with the intensity of the symmetry‐allowed transition being one order of magnitude greater than the intensity of the symmetry‐forbidden transition at the perpendicular polarization. Theoretical calculations using time‐dependent density functional theory (TDDFT) and the complete active space self‐consistent field (CASSCF) method have been carried out to characterize the potential energy surface for the ground state, the low‐lying excited states, and the cationic ground state at various levels of theory. Combining the experimental and theoretical results, we identified the elementary steps in the mechanism: The initial driving force of the ultrafast bond‐breaking process of trans‐azomethane (at the perpendicular polarization) is due to the CNNC torsional motion initiated by the vibronic coupling through an intensity‐borrowing mechanism for the symmetry‐forbidden n–π* transition. Following this torsional motion and the associated molecular symmetry breaking, an S₀/S₁ conical intersection (CI) can be reached at a torsional angle of 93.1° (predicted at the CASSCF(8,7)/cc‐pVDZ level of theory). Funneling through the S₀/S₁ CI could activate the asymmetric C? N stretching motion, which is the key motion for the consecutive C? N bond breakages on the femtosecond time scale.     

Molecular parameters of tetraatomic carbonyls X2CO and XYCO (X,Y = H,F, Cl) in the ground and lowest excited electronic states,part 1: A test of ab initio methods

Geometrical parameters of tetraatomic carbonyl molecules X₂CO and XYCO (X, Y = H, F, Cl) in the ground (S₀) and lowest excited singlet (S₁) and triplet (T₁) electronic states as well as values of barriers to inversion in S₁ and T₁ states and S₁ ← S₀ and T₁ ← S₀ adiabatic transition energies were systematically investigated by means of various quantum‐chemical techniques. The following methods were tested: HF, MP2, CIS, CISD, CCSD, EOM‐CCSD, CCSD(T), CR‐EOM‐CCSD(T), CASSCF, MR‐MP2, CASPT2, CASPT3, NEVPT2, MR‐CISD, and MR‐AQCC within cc‐pVTZ and cc‐pVQZ basis sets. The accuracy of quantum‐chemical methods was estimated in comparison with experimental data and rather accurate structures of excited electronic states were obtained. MP2 and CASPT2 methods appeared to be the most efficient and CCSD(T), CR‐EOM‐CCSD(T), and MR‐AQCC the most accurate. It was found that at equilibrium all the molecules under study are nonplanar in S₁ and T₁ electronic states with CO out‐of‐plane angle ranging from 34° (H₂CO, S₁) to 52° (F₂CO, T₁), and height of barrier to inversion varying from 300 (H₂CO, S₁) to 11,000 (F₂CO, T₁) cm^?1. © 2008 Wiley Periodicals, Inc. Int J Quantum Chem, 2009     

Influence of an identified dimer vibration on the emission spectrum of [2,2]paracyclophane

The emission spectrum of polycrystalline [2,2]paracylophane shows a resolved vibronic structure with a 241 cm^?1 progression at He temperatures. The dependence of the energy of this mode upon selective deuteration in combination with results from FIR and Raman spectra could be used to identify the mode as a torsional dimer vibration. The emission spectra could be simulated assuming a linear coupling of the torsional mode to the electronic transitions with coupling strengths of S = 10 (fluorescence) and S = 13 (phosphorescence). This corresponds to an equilibrium displacement of the benzene rings under electronic excitation by a torsional angle of 10.6° (S₁) and 12.1° (T₁), in addition to the small torsion in the ground state S₀ by about 3°.