Synthesis,characterization and photocatalytic properties of tungsten-doped hydrothermal TiO<Subscript>2</Subscript>

Crystalline anatase phase TiO₂ with photocatalytic properties was obtained through a sol–gel low-temperature hydrothermal process. TiO₂ samples doped with tungsten oxide were also obtained by using this synthetic approach. The photocatalytic oxidation of methylene blue in water was monitored to study the influence of the tungsten doping degree on the photocatalytic degradation performance of TiO₂. The degradation rate constant was further increased by adjusting the tungsten doping degree of hydrothermal TiO₂. Also, a much faster photodegradation of methylene blue was achieved using tungsten doped samples baked at 450°C. The results were compared with those obtained with Degussa P25 used as photocatalyst. The structure and optical properties of tungsten-doped TiO₂ were studied by SEM, X-ray diffraction, UV–vis and DRIFT spectroscopy techniques.     

Influence of NH<Subscript>3</Subscript>-treating temperature on visible light photocatalytic activity of N-doped P<Subscript>25</Subscript>-TiO<Subscript>2</Subscript>

The influence of NH₃-treating temperature on the visible light photocatalytic activity of N-doped P₂₅-TiO₂ as well as the relationship between the surface composition structure of TiO₂ and its visible light photocatalytic activity were investigated. The results showed that N-doped P₂₅-TiO₂ treated at 600°C had the highest activity. The structure of P₂₅-TiO₂ was converted from anatase to rutile at 700°C. Moreover, no N-doping was detected at the surface of P₂₅-TiO₂. There was no simply linear relationship between the visible light photocatalytic activity and the concentration of doped nitrogen, and visible light absorption. The visible light photocatalytic activity of N-doped P₂₅-TiO₂ was mainly influenced by the synergistic action of the following factors: (i) the formation of the single-electron-trapped oxygen vacancies (denoted as V_o^·); (ii) the doped nitrogen on the surface of TiO₂; (iii) the anatase TiO₂ structure.     

Microstructure and Photocatalytic Property of SiO<Subscript>2</Subscript>-TiO<Subscript>2</Subscript> Under Various Process Condition

Nanophase silica-titania particles were prepared by two different synthetic routes, namely, sol–gel and hydrothermal processing. The crystallinity and crystallographic phases, particle size and surface area of the materials were controlled by varying the calcination temperature, and/or the ratio of Si to Ti. It was determined by XRD that the crystallite sizes of SiO₂-TiO₂ prepared by sol–gel and hydrothermal processing decreased from 11 to 6 nm and 12 to 9 nm, respectively, as the mole fraction of silica was increased from 0.1 to 0.4. It is proposed that the presence of the amorphous silica suppresses the growth of anatase TiO₂ grains and their phase transformation to rutile. The photocatalytic decomposition rate of 1,4-dichlorobenzene (DCB) in aqueous solution with the sol–gel derived SiO₂-TiO₂ powder prepared at 750 °C was about 10 ± 5% higher than that observed with Degussa P25, whereas the SiO₂-TiO₂ samples prepared by hydrothermal processing at 250 °C showed a slightly lower decomposition rate than P25.     

Surface properties and photocatalytic activity of nanocrystalline titania films

In this work the efficiency and physicochemical details of a thin film produced by help of a microwave assisted sol gel technique is compared to different commercial powders (Degussa P25 and Hombikat UV100) deposited on glass substrates. Furthermore, a supercritical produced TiO₂ powder (SC 134) was included in the comparison.The prepared TiO₂ films were characterized using XRD, XPS, AFM, DSC and DLS. The photocatalytic activity was determined using stearic acid as a model compound. Investigation of the prepared films showed that the Degussa P25 film and the sol–gel film were the most photocatalytic active films. The activity of the films was found to be related to the crystallinity of the TiO₂ film and the amount of surface area and surface hydroxyl groups. Based on the XPS investigation of the films before and after UV irradiation it was suggested that the photocatalytic destruction of organic matter on TiO₂ films proceeds partly through formation of hydroxyl radicals which are formed from surface hydroxyl groups created by interactions between adsorbed water and vacancies on the TiO₂ surface. Furthermore a correlation between the amount of OH groups on the surface of the different TiO₂ films and the photocatalytic activity was found.     

Investigation of Br–N Co-doped TiO<Subscript>2</Subscript> photocatalysts: preparation and photocatalytic activities under visible light

Bromine (Br) and nitrogen (N) co-doped TiO₂ ((Br–N–TiO₂) photocatalysts were prepared by a sol–gel method. The catalysts were characterized by X-ray Diffraction (XRD), N₂ adsorption and desorption isotherms, X-ray Photoelectron Spectra (XPS), UV-Vis Diffraction Spectra and Electron Spin Response (ESR) Spectra. Experiments on photodegradation of Methylene Blue (MB) and Sulfosalicylic Acid (SSA) under visible light were carried out to evaluate the photocatalytic activities of the catalysts. Chemical Oxygen Demand (COD) analysis was also conducted to evaluate the mineralization degrees of the catalysts in MB photodegradation. Enhanced photocatalytic activities were observed for the Br–N–TiO₂ catalysts in the experiments of MB and SSA photodegradation. A possible mechanism was proposed to explain the improved photocatalytic activities of the Br–N–TiO₂ catalysts.     

A sol–gel combustion synthesis method for TiO<Subscript>2</Subscript> powders with enhanced photocatalytic activity

TiO₂ photocatalytic powders were synthesized by a sol–gel combustion synthesis method in which urea was used as the fuel and titanyl nitrate was used as the oxidizer. Various fuel-to-oxidizer ratios were studied for their effects on the combustion phenomena and the properties of the synthesized TiO₂. The fuel-to-oxidizer ratio was found to determine the maximum combustion temperature, which in turn affects the specific surface area, crystallite size, and weight fraction of anatase phase of the synthesized TiO₂. The synthesized TiO₂ all contain carbonaceous species and are either pure anatase or anatase–rutile mixed phase in crystalline structure. The photocatalytic activity of the TiO₂ was found to correlate to a certain degree with the specific surface area, crystallite size, weight fraction of anatase phase, and visible and IR absorbances. The mixed phase TiO₂ shows a higher photocatalytic activity than the pure anatase phase TiO₂ when containing a small fraction (<~25 wt%) of rutile phase but a lower phoyocatalytic activity when containing a large fraction (>~25 wt%) of rutile phase. The synthesized TiO₂ all show higher photocatalytic activity than Degussa P25 TiO₂. The enhanced photocatalytic activity was attributed mainly to sensitization by the carbonaceous species and larger amounts of hydroxyl group adsorbed on the TiO₂ surface.     

双介孔结构的纳米TiO2/I2复合材料的制备及其可见光催化性能

以钛酸丁酯为前驱体, 碘溶胶为碘源, 在室温下采用水解沉淀法制备了单质碘和纳米TiO₂复合的双介孔结构光催化剂(M-I₂-TiO₂). 采用X射线衍射(XRD)、透射电子显微镜(TEM)、比表面分析(BET)、紫外-可见(UV-Vis)漫反射光谱和傅里叶变换-红外光谱(FT-IR)对M-I₂-TiO₂进行了表征. 以次甲基蓝(MB)溶液为模拟废水, 对M-I₂-TiO₂的光催化性能进行了评价, 研究了不同热处理温度对光催化活性的影响. 结果表明, M-I₂-TiO₂在可见光区有显著的吸收, 300 ℃热处理得到的样品比表面积高达227.6 m²/g, 600 ℃热处理所得样品的比表面积仍高达111.8 m²/g, 而400 ℃热处理所得样品具有最好的光催化降解性能. 双介孔结构纳米TiO₂/I₂复合材料的光催化降解性能显著高于相同方法制备的纯TiO₂和Degussa P-25商业产品. 催化剂经6次重复使用其光催化活性基本保持不变.     

Comparison of the substrate dependent performance of Pt-, Au- and Ag-doped TiO2 photocatalysts in H2-production and in decomposition of various organics

Pt-, Au- and Ag-deposited Degussa P25 photocatalysts [at 1% (m/m) noble metal loading] were prepared in which the noble metals are most likely to be very finely dispersed on the surface of the TiO₂ nanocrystals. Deposition of noble metals increased the photocatalytic efficiency (relative to the bare photocatalyst) in the decomposition of oxalic- and formic acid, while decreased it in phenol containing systems. In H₂-production, a very high quantum yield has been found for the Pt–TiO₂ photocatalyst in the presence of oxalic and formic acids as sacrificial reagents, which opens the possibility for the economic use of industrial side products (e.g., oxalic- and formic acid) for photocatalytic H₂-production.     

Synthesis of bimodal porous structured TiO2 microsphere with high photocatalytic activity for water treatment

In this work bimodal structured titanium dioxide (TiO₂) microsphere has been prepared from commercial TiO₂ powder and nano-sized titania gel via sol–gel spray-coating technique. Crystallization and transformation behavior of titania gel were investigated. The results revealed that the crystallization and transformation of anatase particles were substantially affected by the concentration of solvent and calcination temperature. Anatase crystallite size of 10 nm was obtained at mole ratio of solvent/precursor 50/1 and calcination temperature of 450 °C. The prepared nano-sized titania gel was embedded within the core (commercial TiO₂, P25) during the spraying process. The prepared TiO₂ microsphere was characterized using X-ray diffractometer (XRD), scanning electron microscope (SEM), field emission electron microscope (FESEM) and micropore analysis. The photocatalytic activity was monitored by following the degradation of phenol with activity benchmarked against commercial P25 (Degussa). The increase of photocatalytic activity of TiO₂ microsphere was attributed to the nano-sized anatase crystallite which has been incorporated into the TiO₂ microsphere.     

Influence of MnO<Subscript>2</Subscript> on the photocatalytic activity of P-25 TiO<Subscript>2</Subscript> in the degradation of methyl orange

Influences of α-MnO₂, β-MnO₂, and δ-MnO₂ on the photocatalytic activity of Degussa P-25 TiO₂ have been investigated through the photocatalytic degradation of methyl orange. The TiO₂ photocatalyst, before and after being contaminated by MnO₂, was characterized by UV-visible diffuse reflectance spectroscopy (UV-vis DRS), photoluminescence (PL), and X-ray photoelectron spectroscopy (XPS). The results showed that photocatalytic activity of TiO₂ could be inhibited significantly or completely deactivated due to the presence of even a small amount of MnO₂ particles. It was found that the poisoning effect varied with the crystal phases of MnO₂ and the effect was in the order δ-MnO₂ >α-MnO₂ >β-MnO₂. The poisoning effect was attributed to the formation of heterojunctions between MnO₂ and TiO₂ particles. The heterojunctions changed the chemical state of Ti⁴⁺ and O²⁻ sites in the crystalline phase of TiO₂. MnO₂ in contact with TiO₂ particles also broadens the band-gap of TiO₂, which decreases UV absorption of TiO₂. It can also create some deep impurity energy levels serving as photoelectron-photohole recombination center, which accelerates the electron-hole recombination. Supported by the National Natural Science Foundation of China (Grant No. 20477009) and the Natural Science Foundation of Hebei Province (Grant No. E2005000183)     

N,B, Si-tridoped mesoporous TiO<Subscript>2</Subscript> with high surface area and excellent visible-light photocatalytic activity

N, B, Si-tridoped mesoporous TiO₂, together with N-doped, N, B-codoped and N, Si-codoped TiO₂, was prepared by a modified sol–gel method. The samples were characterized by wide-angle X-ray diffraction (WAXRD), N₂ adsorption–desorption, transmission electron microscopy (TEM), Fourier transform infrared (FT-IR) spectroscopy, UV–visible adsorbance spectra (UV–vis) and X-ray photoelectron spectra (XPS). The N, B, Si-tridoped mesoporous TiO₂ showed small crystallite size, large specific surface area (350 m²/g), uniform pore distribution (3.2 nm) and strong absorption in the visible light region. The photocatalytic activities of the samples were evaluated by the photodegradation of 2,4-dichlorophenol (2,4-DCP) aqueous solution. The N, B, Si-tridoping sample exhibited much higher photocatalytic activity compared with other synthesized photocatalysts. The high activity could be attributed to the strong absorption in the visible light region, large specific surface area, small crystallite size, large amount of surface hydroxyl groups, and mesoporosity.     

Visible Light Photocatalytic Activity of Porphyrin Tin(IV) Sensitized TiO2 Nanoparticles for the Degradation of 4-Nitrophenol and Methyl Orange

A stable metalloporphyrin sensitized TiO₂ (Degussa P25) photocatalyst was prepared by using trans-dihydroxo[5,10,15,20-tetraphenylporphyrin]tin(IV) (SnP) as a sensitizer in a simple impregnation process. The solid diffuse reflectance ultraviolet-visible (UV-vis) spectrum of the SnP sensitized TiO₂ photocatalyst (SnP-TiO₂) indicated that there existed interaction between SnP and TiO₂. It was found that SnP-TiO₂ exhibited an enhanced visible light photocatalytic activity as compared with that over P25 for the degradation of 4-nitrophenol (4-NP) and methyl orange (MO) in aqueous solutions. The mechanism exploration showed that the degradation of MO and 4-NP experienced two different ways, that is, MO was photodegraded by reactive oxygen species and 4-NP was directly photodegraded by the excited state of SnP. Furthermore, it was found that the loading content of SnP had an important influence on the photocatalytic activity of TiO₂. The maximum photocatalytic efficiency was achieved when the contents of SnP were 25 mg and 30 mg per gram TiO₂ for MO and 4-NP, respectively. Importantly, SnP-TiO₂ was particularly stable and the photocatalytic activity was hardly decreased after being recycled seven times in the presence of oxygen, which could be attributed to the easy reductive regeneration of SnP.     

Photocatalytic degradation of metoprolol in water suspension of TiO<Subscript>2</Subscript> nanopowders prepared using sol–gel route

Nanocrystalline titanium dioxide (TiO₂) powders have been synthesized by sol–gel method using titanium tetrachloride (TiCl₄) or tetrabutyl titanate (Ti(OC₄H₉)₄ as precursors, different alcohols and calcination temperatures in the range from 400 to 650 °C. The photocatalytic activity of as-prepared powders has been tested for the degradation of metoprolol tartrate salt, a selective β-blocker used to treat a variety of cardiovascular diseases, and compared to photocatalytic activity obtained from Degussa P25. Nanosized TiO₂ powders prepared from TiCl₄ and amyl-alcohol, calcined at 550 °C, displayed an activity comparable to Degussa P25, whereas the sample from the same series, calcined at 650 °C, showed higher photocatalytic activity in the whole range of the catalyst loading. Structural, morphological and surface properties of synthesized TiO₂ nanopowders have been investigated by XRD, SEM, EDS and BET measurements, as well as FTIR and Raman spectroscopy, in order to find out the material properties which enable rapid an efficient decomposition of metoprolol under UV radiation.     

Preparation and characterization of silver and indium vanadate co-doped TiO2 thin films as visible-light-activated photocatalyst

Novel visible-light-activated photocatalytic Ag/InVO₄-TiO₂ thin films were developed in this paper through a sol-gel method from the TiO₂ sol containing Ag and InVO₄. The photocatalytic activities of Ag/InVO₄-TiO₂ thin films were investigated based on the oxidation decomposition of methyl orange in aqueous solution. The Ag/InVO₄-TiO₂ thin films were characterized by X-Ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), X-ray photoelectron spectroscopy (XPS) and UV-vis absorption spectroscopy (UV-vis). The results revealed that the Ag/InVO₄-TiO₂ thin films extended the light absorption spectrum toward the visible region; the Ag and InVO₄ co-doped thin films significantly enhanced the methyl orange photodegradation under visible light irradiation. It has been confirmed that the Ag/InVO₄-TiO₂ thin films could be excited by visible light (E < 3.2 eV). The significant enhancement in the Ag/InVO₄-TiO₂ photo activity under visible light irradiation can be ascribed to the simultaneous effects of doped noble metal Ag by acting as electron traps and InVO₄ as narrow band gap sensitizer.     

Comparison of photocatalysis degradation of 4-nitrophenol using N,S co-doped TiO2 nanoparticles synthesized by two different routes

The photocatalytic degradation of 4-nitrophenol as pollutant in aqueous solutions was investigated under visible light irradiation over two different N?CS-codoped anatase TiO₂ catalysts prepared by sol?Cgel methods using titanium isopropoxide and titanium tetrachloride as two different precursors. The catalysts were characterized by XRD, SEM, DRS, EDAX and FT-IR. The effects of various operating parameters including the initial concentration of 4-nitrophenol (2?C14?ppm), solution pH (5?C8) and kinetic reactions were studied. The optimum solution pH was at around 6. For comparison purpose, the photodegradation activity of the commercial Degussa P-25 TiO₂ catalyst has also been studied. The results indicated that photocatalytic activity of N?CS-codoped TiO₂ with titanium isopropoxide as precursor was higher than N?CS-codoped TiO₂ with titanium tetrachloride as precursor and Degussa P-25.     

Enhancement of cyanide photocatalytic degradation using sol–gel ZnO sensitized with cobalt phthalocyanine

In this work, the photodegradation of cyanide in aqueous suspension was used to determine the photocatalytic activity of sol–gel prepared ZnO which was impregnated with the Co (II) phthalocyanine (CoPc), as sensitizer. The prepared catalyst was characterized by Scanning Electron Microscopy (SEM) with Energy Dispersed Spectroscopy (EDS) detector, X-Ray Diffraction (XRD), Fourier Transform Infrared spectroscopy (FT-IR) and Diffuse UV–Vis Reflectance spectroscopy. Specific surface area was calculated from nitrogen adsorption isotherm using BET method. Compared with commercial ZnO and TiO₂ Degussa P25 photocatalysts, the sol–gel prepared ZnO catalyst sensitized with cobalt phthalocyanine showed the highest activities for degradation of cyanide in aqueous solution under visible light irradiation.     

Hydrothermal synthesis of (Fe,N) co-doped TiO<Subscript>2</Subscript> powders and their photocatalytic properties under visible light irradiation

(Fe, N) co-doped titanium dioxide powders have been prepared by a quick, low-temperature hydrothermal method using TiOSO₄, CO(NH₂)₂, Fe(NO₃)₃, and CN₃H₅ · HCl as starting materials. The synthesized powders were characterized by XRD, TEM, BET, XPS, and UV–Vis spectroscopy. Experimental results show that the as-synthesized TiO₂ powders are present as the anatase phase and that the N and Fe ions have been doped into the TiO₂ lattice. The specific surface area of the powders is 167.8 m²/g by the BET method and the mean grain size is about 11 nm, calculated by Scherrer’s formula. UV–Vis absorption spectra show that the edge of the photon absorption has been red-shifted up to 605 nm. The doped titanium dioxide powders had excellent photocatalytic activity during the process of photo-degradation of formaldehyde and some TVOC gases under visible light irradiation.     

Rapid Synthesis of Nanocrystalline TiO2/SnO2 Binary Oxides and Their Photoinduced Decomposition of Methyl Orange

A rapid and simple method, the so-called stearic acid method (SAM) was developed to prepare nanostructured TiO₂/SnO₂ binary oxides by combustion of stearic acid precursors. The preparative process was studied by Fourier transform infrared spectroscopy (FT-IR). During the preparative process, metal precursors were dispersed in stearic acid at molecular level. Microstructure of the samples was investigated by X-ray diffraction (XRD), transmission electron microscopy (TEM), BET specific surface area measurement and the results were compared with those obtained by conventional sol-gel method. The photocatalytic decomposition of methyl orange was used as a model system to determine the relative influences of the preparation method and the concentration of SnO₂ on the photocatalytic activities. It was found that preparative methods affected the crystalline structure of TiO₂/SnO₂ powders and the anatase phase of TiO₂ was stabilized by the addition of SnO₂ in SAM. The samples prepared by SAM showed better dispersity, larger specific surface area and the TiO₂/SnO₂ (r=0.15, SAM) catalyst showed higher photocatalytic activity than Degussa P25.     

Sol–gel synthesis,characterization and photocatalytic activity of mesoporous TiO<Subscript>2</Subscript>/γ-Al<Subscript>2</Subscript>O<Subscript>3 </Subscript>granules

Mesoporous TiO₂/γ-Al₂O₃ composite granules were prepared by combining sol–gel/oil-drop method, using various titania solution. The product granules can be used as a photocatalyst or adsorbent in moving, fluidized bed reactors. The phase composition and pore structure of the granules can be controlled by calcination temperature and using different titania solution. In the photocatalysis of NH₃ decomposition, TiO₂/γ-Al₂O₃ granules using Degussa P25 powder treated thermally at 450 °C showed the highest catalytic ability. However, TiO₂/γ-Al₂O₃ granules using titania made by hydrothermal method had comparable performance in NH₃ decomposition.     

Preparation of nanocrystalline Fe-doped TiO<Subscript>2</Subscript> powders as a visible-light-responsive photocatalyst

Nanocrystalline Fe-doped TiO₂ powders were prepared using TiOSO₄, urea, and Fe(NO₃)₃ · 9H₂O as precursors through a hydrothermal method. The as-synthesized yellowish-colored powders are composed of anatase TiO₂, identified by X-ray diffraction (XRD). The grain size ranged from 9.7 to 12.1 nm, calculated by Scherrer’s method. The specific surface area ranged from 141 to 170 m²/g, obtained by the Brunauer–Emmett–Teller (BET) method. The transmission electron microscopy (TEM) micrograph of the sample shows that the diameter of the grains is uniformly distributed at about 10 nm, which is consistent with that calculated by Scherrer’s method. Fe³⁺ and Fe²⁺ have been detected on the surface of TiO₂ powders by X-ray photoelectron spectroscopy (XPS). The UV–Vis diffuse reflection spectra indicate that the light absorption thresholds of the Fe-doped TiO₂ powders have been red-shifted into the visible light region. The photocatalytic activity of the Fe-doped TiO₂ was evaluated through the degradation of methylene blue (MB) under visible light irradiation. The Fe-doped TiO₂ powders have shown good visible-light photocatalytic activities and the maximum degradation ratio is achieved within 4.5 h.