Non-linear vibrations of free-edge thin spherical shells: modal interaction rules and 1:1:2 internal resonance

This paper is devoted to the derivation and the analysis of vibrations of shallow spherical shell subjected to large amplitude transverse displacement. The analog for thin shallow shells of von Kármán’s theory for large deflection of plates is used. The validity range of the approximations is assessed by comparing the analytical modal analysis with a numerical solution. The specific case of a free edge is considered. The governing partial differential equations are expanded onto the natural modes of vibration of the shell. The problem is replaced by an infinite set of coupled second-order differential equations with quadratic and cubic non-linear terms. Analytical expressions of the non-linear coefficients are derived and a number of them are found to vanish, as a consequence of the symmetry of revolution of the structure. Then, for all the possible internal resonances, a number of rules are deduced, thus predicting the activation of the energy exchanges between the involved modes. Finally, a specific mode coupling due to a 1:1:2 internal resonance between two companion modes and an axisymmetric mode is studied.     

Acoustic Radiation from a Finite Length Cylindrical Shell Excited by an Internal Acoustic Source: Solution Based on a Boundary Element Method and a Matched Asymptotic Expansion

This paper deals with acoustic radiation by a thin elastic shell, closed by two perfectly rigid discs, immersed in water and filled with air. The system is driven by an internal acoustic source. The shell has a length L, is clamped along one of its boundaries and is freely supported along the other boundary. Using the infinite domain Green's function, the radiated acoustic pressure is modeled by a hybrid layer potential (linear combination with nonreal coefficient of a simple layer and a double layer). Using Green's tensor of the in vacuo shell operator, the shell displacement is expressed as the sum of the field generated by the acoustic pressures and that due to boundary sources. Finally, the Green's function of the interior Neumann problem is used to express the acoustic pressure inside the shell in terms of the acoustic source and shell normal displacement: this representation fails for any frequency equal to one of the resonance frequencies of the shell interior. To overcome this, a light fluid approximation, which is allowed because the inner fluid is a gas, is adopted. Around each resonance frequency, an inner approximation is defined which matches the classical outer approximation. This revised version was published online in July 2006 with corrections to the Cover Date.     

Energetics of axisymmetric fluid-filled pipes up to high frequencies

The energetics of motions of axisymmetric fluid-filled pipes are presented in this paper, in view of high-frequency modelling. This study deals in particular with derivations of local energy equations well suited for the prediction of averaged response of coupled fluid–structure systems. The derivation of the latter requires special manipulation of the kinematic dynamics based here on the notion of propagation modes. Thus, the focus is on the Donnell–Mushtari cylindrical shell with an internal acoustic fluid, a typical example of waveguides with multiple transmission mechanisms. “Exact” and statistical approaches are developed for this system. A state-space representation is first proposed; it allows the characterization of propagating modes in a general manner. This propagating content then leads to the formulation of the local energy approach for this canonical problem.     

Basic solutions of multiple parallel symmetric mode-III cracks in functionally graded piezoelectric/piezomagnetic material plane

The Schmidt method is adopted to investigate the fracture problem of multiple parallel symmetric and permeable finite length mode-III cracks in a functionally graded piezoelectric/piezomagnetic material plane. This problem is formulated into dual integral equations, in which the unknown variables are the displacement jumps across the crack surfaces. In order to obtain the dual integral equations, the displacement jumps across the crack surfaces are directly expanded as a series of Jacobi polynomials. The results show that the stress, the electric displacement, and the magnetic flux intensity factors of cracks depend on the crack length, the functionally graded parameter, and the distance among the multiple parallel cracks. The crack shielding effect is also obviously presented in a functionally graded piezoelectric/piezomagnetic material plane with mul- tiple parallel symmetric mode-III cracks.     

The closed form solution of a Mode-I crack in the piezoelectric/piezomagnetic materials

In this paper, the behavior of a Mode-I crack in the piezoelectric/piezomagnetic materials subjected to a uniform tension loading is investigated by the generalized Almansi’s theorem. Through the Fourier transform, the problem can be solved with the help of two pairs of dual integral equations, in which the unknown variables are the jumps of the displacements across the crack surfaces. To solve the dual integral equations, the displacement jumps are directly expanded in a series of Jacobi polynomials. Then the closed form solution of this problem can be obtained.     

Experiments on the dynamic behavior of fluid-coupled concentric cylinders

This paper describes an experimental vibration study of fluid-coupled coaxial cylinders that simulates the vibration of a reactor vessel with a thermal liner. The model cylinders are made of acrylic. Thickness and gap-size parameter studies are performed by a series of different compinations of three outside cylinders and nine inside cylinders that have variable thicknesses and diameters. Damping ratios are measured on a mode-by-mode basis for several combinations of cylinders. The vibrated cylinders are mounted to a rigid stand, with the cuter cylinder supported at both ends and the inner cylinder supported at either one end (pendulum mode) or both ends, as the case may be. The natural frequencies are obtained first in air and then with coaxial cylinders coupled by water. The mode shapes are obtained by circumferential (shell modes) and axial (shell/beam modes) mapping of the response with two diametrically opposite ‘roving’ Dymac eddy probes. In general, the natural vibration of the system has two distinct responses in-phase and/or out-of-phase modes, i.e., the radial displacement phase relationship between inner and outer cylinders. In the out-of-phase modes the frequency is shown to decrease to either zero or a very low limiting value as the gap size cecreases. The opposite occurs for in-phase modes. Damping ratios are found to be much higher for out-of-phase modes and for relatively rigid cylinders than for in-phase modes and flexible cylinders, respectively.     

Stress intensity factors around a cylindrical crack in an interfacial zone in composite materials

Axisymmetric stresses around a cylindrical crack in an interfacial cylindrical layer between an infinite elastic medium with a cylindrical cavity and a circular elastic cylinder made of another material have been determined. The material constants of the layer vary continuously from those of the infinite medium to those of the cylinder. Tension surrounding the cylinder and perpendicular to the axis of the cylinder is applied to the composite materials. To solve this problem, the interfacial layer is divided into several layers with different material properties. The boundary conditions are reduced to dual integral equations. The differences in the crack faces are expanded in a series so as to satisfy the conditions outside the crack. The unknown coefficients in the series are solved using the conditions inside the crack. Numerical calculations are performed for several thicknesses of the interfacial layer. Using these numerical results, the stress intensity factors are evaluated for infinitesimal thickness of the layer.     

MULTIPLE PARALLEL SYMMETRIC PERMEABLE MODEL-Ⅲ CRACKS IN A PIEZOELECTRIC/PIEZOMAGNETIC COMPOSITE MATERIAL PLANE

In this paper, the interactions of multiple parallel symmetric and permeable finite length cracks in a piezoelectric/piezomagnetic material plane subjected to anti-plane shear stress loading are studied by the Schmidt method.The problem is formulated through Fourier transform into dual integral equations, in which the unknown variables are the displacement jumps across the crack surfaces.To solve the dual integral equations, the displacement jumps across the crack surfaces are directly expanded as a series of Jacobi polynomials.Finally, the relation between the electric field, the magnetic flux field and the stress field near the crack tips is obtained.The results show that the stress, the electric displacement and the magnetic flux intensity factors at the crack tips depend on the length and spacing of the cracks.It is also revealed that the crack shielding effect presents in piezoelectric/piezomagnetic materials.     

THE BASIC SOLUTION OF A 3-D RECTANGULAR PERMEABLE CRACK IN A PIEZOELECTRIC/PIEZOMAGNETIC COMPOSITE MATERIAL

The solution of a 3-D rectangular permeable crack in a piezoelectric/piezomagnetic composite material was investigated by using the generalized Almansi’s theorem and the Schmidt method.The problem was formulated through Fourier transform into three pairs of dual integral equations,in which the unknown variables are the displacement jumps across the crack surfaces.To solve the dual integral equations,the displacement jumps across the crack surfaces were directly expanded as a series of Jacobi polynomials.Finally,the relations between the electric filed,the magnetic flux field and the stress field near the crack edges were obtained and the efects of the shape of the rectangular crack on the stress,the electric displacement and magnetic flux intensity factors in a piezoelectric/piezomagnetic composite material were analyzed.     

Interaction between a submerged evacuated cylindrical shell and a shock wave—Part II: Numerical aspects of the solution

The interaction between a submerged elastic circular cylindrical shell and an external shock wave is addressed. A linear, two-dimensional formulation of the problem is considered. A semi-analytical solution is obtained using a combination of the classical analytical approach based on the use of the Laplace transform and separation of variables, and finite difference methodology. The study consists of two parts. Part I focuses on the simulation and analysis of the acoustic fields induced during the interaction. Both the diffraction (absolutely rigid cylinder) and complete diffraction–radiation (elastic shell) are considered. Special attention is paid to the lower-magnitude shell-induced waves representing radiation by the elastic waves circumnavigating the shell. The focus of Part II is on the numerical analysis of the solution. The convergence of the series solution and finite-difference scheme is analysed. The computation of the response functions of the problem is discussed as well, as is the effect of the bending stiffness on the acoustic field. The membrane model of the shell is considered to analyse such effect, which, in combination with the models addressed in Part I, allows for the analysis of the evolution of the acoustic field around the structure as its elastic properties change from an absolutely rigid cylinder to a membrane. The results of the numerical simulations are compared to available experimental data, and a good agreement is observed.     

Interaction between a submerged evacuated cylindrical shell and a shock wave—Part I: Diffraction–radiation analysis

The interaction between a submerged elastic circular cylindrical shell and an external shock wave is addressed. A linear, two-dimensional formulation of the problem is considered. A semi-analytical solution is obtained using a combination of the classical analytical approach based on the use of the Laplace transform and separation of variables, and finite difference methodology. The study consists of two parts. Part I focuses on the simulation and analysis of the acoustic fields induced during the interaction. Both the diffraction (absolutely rigid cylinder) and complete diffraction–radiation (elastic shell) are considered. Special attention is paid to the lower-magnitude shell-induced waves representing radiation by the elastic waves circumnavigating the shell. The focus of Part II is on the numerical analysis of the solution. The convergence of the series solution and finite-difference scheme is analysed. The computation of the response functions of the problem is discussed as well, as is the effect of the bending stiffness on the acoustic field. The membrane model of the shell is considered to analyse such an effect, which, in combination with the models addressed in Part I, allows for the analysis of the evolution of the acoustic field around the structure as its elastic properties change from an absolutely rigid cylinder to a membrane. The results of the numerical simulations are compared to available experimental data, and a good agreement is observed.     

A 3-D rectangular permeable crack or two 3-D rectangular permeable cracks in a piezoelectric material

The solutions of a 3-D rectangular permeable crack and two 3-D rectangular permeable cracks in a piezoelectric material were investigated by using the generalized Almansi’s theorem and the Schmidt method. The problem was formulated through Fourier transform into three pairs of dual integral equations, in which the unknown variables are the displacement jumps across the crack surfaces. To solve the dual integral equations, the displacement jumps across the crack surfaces were directly expanded as a series of Jacobi polynomials. Finally, the effects of the shape of the rectangular crack and the distance between two rectangular cracks on the stress and electric displacement intensity factors in a piezoelectric material were analyzed. These results can be used for the strength and the coupling effect evaluation of cracked piezoelectric materials.     

Basic solutions of a 3-D rectangular limited-permeable crack or two 3-D rectangular limited-permeable cracks in?piezoelectric materials

The solutions of a 3-D rectangular limited-permeable crack or two 3-D rectangular limited-permeable cracks in piezoelectric materials were given by using the generalized Almansi’s theorem and the Schmidt method. At the same time, the electric permittivity of the air inside the rectangular crack was considered. The problem was formulated through Fourier transform as three pairs of dual integral equations, in which the unknown variables are the displacement jumps across the crack surfaces. To solve the dual integral equations, the displacement jumps across the crack surfaces were directly expanded as a series of Jacobi polynomials. Finally, the effects of the electric permittivity of the air inside the rectangular crack,the shape of the rectangular crack and the distance between two rectangular cracks on the stress and electric displacement intensity factors in piezoelectric materials were analyzed.     

Transient waves in a thin sphere enclosing an acoustic medium from a moving planar pressure discontinuity

Three models are adopted to analyze transient waves in a spherical shell enclosing an acoustic medium from a moving planar pressure discontinuity. The first model is a plane-strain thin ring. The second model is a spherical shell, and the third model is a plane-strain thick ring that modifies the thin ring model to include reflections across the thickness. All models agree that extensional motions of the shell control internal acoustic pressure of the fluid, and that flexural motions modulate average response by a small amplitude high frequency oscillation. The spherical shell model yields a temporary negative pressure opposite to the striking point and a persistent sharp drop in pressure close to the center. Magnitude of transient pressure depends on the separation between the coupled structural resonance and the internal acoustic resonance with pressure release at the boundary.     

Uncertainty quantification for dynamics of geometrically nonlinear structures coupled with internal acoustic fluids in presence of sloshing and capillarity

In this paper, we propose an uncertainty quantification analysis, which is the continuation of a recent work performed in a deterministic framework. The fluid–structure system under consideration is the one experimentally studied in the sixties by Abramson, Kana, and Lindholm from the Southwest Research Institute under NASA contract. This coupled system is constituted of a linear acoustic liquid contained in an elastic tank that undergoes finite dynamical displacements, inducing geometrical nonlinear effects in the structure. The liquid has a free surface on which sloshing and capillarity effects are taken into account. The problem is expressed in terms of the acoustic pressure field in the fluid, of the displacement field of the elastic structure, and of the normal elevation field of the free surface. The nonlinear reduced-order model constructed in the recent work evoked above is reused for implementing the nonparametric probabilistic approach of uncertainties. The objective of this paper is to present a sensitivity analysis of this coupled fluid–structure system with respect to uncertainties and to use a classical statistical inverse problem for carrying out the experimental identification of the hyperparameter of the stochastic model. The analysis show a significant sensitivity of the displacement of the structure, of the acoustic pressure in the liquid, and of the free-surface elevation to uncertainties in both linear and geometrically nonlinear simulations.     

Analysis of wave propagation in piezoelectric coupled cylinder affected by transverse shear and rotary inertia

In this paper, we examine the wave propagation in a piezoelectric coupled cylindrical shell affected by the shear effect and rotary inertia. A complete mathematical analysis of wave propagation solution in this piezoelectric coupled cylindrical shell is provided. The dispersion characteristics are derived through the solving an eigenvalue problem. Results are validated by the classical solution of a metallic cylinder. Besides providing and discussing the dispersion curves for different wave modes, we also examine the piezoelectric effects on the dispersion curves. Further to the above investigation, comparison of dispersion solutions from different shell theories is also conducted. This work may serve as a benchmark for wave propagation in piezoelectric coupled cylindrical shells.     

Wave propagation in a transversely isotropic solid cylinder of arbitrary cross-sections immersed in fluid

The wave propagation in an infinite, transversely isotropic solid cylinder of arbitrary cross-section immersed in fluid is studied using the Fourier expansion collocation method, within the framework of the linearized, three-dimensional theory of elasticity. The equations of motion of solid and fluid are respectively formulated using the constitutive equations of a transversely isotropic cylinder and the constitutive equation of an inviscid fluid. Three displacement potential functions are introduced to uncouple the equations of motion along the radial, circumferential and axial directions. The frequency equations of longitudinal and flexural (symmetric and antisymmetric) modes are analyzed numerically for an elliptic and cardioidal cross-sectional transversely isotropic solid cylinder of arbitrary cross-section immersed in fluid. The computed non-dimensional wavenumbers are presented in the form of dispersion curves for the material zinc. The general theory can be used to study any kind of cylinder with proper geometric relations.     

A coupled tire structure/acoustic cavity model

The dynamic characteristic of the tires is a key factor in the road-induced interior noise in passenger vehicles. The tire acoustic cavity is a very important factor in the tire dynamics and it must be considered in analyses. This paper describes a closed form analytical model for tire-wheel structures. In order to incorporate the dynamics of the cavity on the tire response, the tire acoustic-structure coupled problem is solved simultaneously. The tire is modeled as an annular cylindrical shell where only the outside shell is flexible, i.e. tire sidewalls and wheel are assumed rigid. From the analytical solution of the eigenproblems, both the tire structure and cavity acoustic responses are expanded in terms of their eigenfunctions. The main objective of the model is to have an efficient tool to investigate the physical coupling mechanisms between the acoustic cavity and the tire structure without the need of complicated numerical model such as finite elements. The result shows that the proposed model captures the main mechanisms of the effect of the tire air acoustic on the tire dynamics.     

Numerical—Experimental Investigation of the Elastic Deformation of a Polymeric Pipeline under Impact

The paper reports results of numerical—experimental investigation of the hydroelastic process in a polyimide pipeline filled with a fluid. The propagation of small perturbations in the fluid is considered in an acoustic approximation based on wave equations. The equations are integrated using the method of characteristics and a two–layer difference scheme. The elastic problem is solved by the finite element method and the Newmark difference –method. The stress—strain state of the pipeline is defined by a superposition of fast rod modes of motion and slow shell modes of motion. Satisfactory agreement between calculated and experimental data is obtained.     

Numerical modelling of the stability of loaded shells of revolution containing fluid flows

A mixed finite-element algorithm is proposed to study the dynamic behavior of loaded shells of revolution containing a stationary or moving compressible fluid. The behavior of the fluid is described by potential theory, whose equations are reduced to integral form using the Galerkin method. The dynamics of the shell is analyzed with the use of the variational principle of possible displacements, which includes the linearized Bernoulli equation for calculating the hydrodynamic pressure exerted on the shell by the fluid. The solution of the problem reduces to the calculation and analysis of the eigenvalues of the coupled system of equations. As an example, the effect of hydrostatic pressure on the dynamic behavior of shells of revolution containing a moving fluid is studied under various boundary conditions. __________ Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 49, No. 2, pp. 185–195, March–April, 2008