Electrocatalytic oxidation of methanol onto platinum particles decorated nanostructured poly (1,5-diaminonaphthalene) film

In this work, platinum particles decorated nanostructured poly (1,5-diaminonaphthalene) modified glassy carbon electrode (Pt/Nano-PDAN/MGCE) is prepared. The composite catalysts are characterized by scanning electron microscopy, energy dispersive spectroscopy, and electrochemical methods. The electrochemical methanol oxidation reaction is studied at the surface of this modified electrode. At same Pt loading, the Pt/Nano-PDAN/MGCE can act as higher efficient catalyst for methanol oxidation than that Pt/MGCE. Then, the influence of some parameters such as potential scan rates, switching potential, and methanol concentration on its oxidation as well as long-term stability of the modified electrode have studied by electrochemical methods. Also, ability of the modified electrode toward electrocatalytic oxidation of formaldehyde as an intermediate in methanol oxidation has been investigated.     

Electrocatalytic activity of porous nanostructured Fe/Pt-Fe electrode for methanol electrooxidation in alkaline media

An electrochemical approach to fabricate a nanostructured Fe/Pt-Fe catalyst through electrodepo-sition followed by galvanic replacement is presented. An Fe/Pt-Fe nanostructured electrode was prepared by deposition of Fe-Zn onto a Fe electrode surface, followed by replacement of the Zn by Pt at open-circuit potential in a Pt-containing alkaline solution. Scanning electron microscopy and energy-dispersive X-ray techniques reveal that the Fe/Pt-Fe electrode is porous and contains Pt. The electrocatalytic activity of the Fe/Pt-Fe electrode for oxidation of methanol was examined by cyclic voltammetry and chronoamperometry. The electrooxidation current on the Fe/Pt-Fe catalyst is much higher than that on flat Pt and smooth Fe catalysts. The onset potential and peak potential on the Fe/Pt-Fe catalyst are more negative than those on flat Pt and smooth Fe electrodes for methanol electrooxidation. All results show that this nanostructured Fe/Pt-Fe electrode is very attractive for integrated fuel cell applications in alkaline media.     

Electrooxidation of methanol on upd-Ru and upd-Sn modified Pt electrodes

The electrochemical oxidation of methanol has been investigated on underpotentially deposited-ruthenium-modified platinum electrode (upd-Ru/Pt) and on underpotentially deposited-tin-modified platinum electrode (upd-Sn/Pt). The submonolayers of upd-Ru and upd-Sn on a Pt electrode increased the rate of methanol electrooxidation several times as large as that on a pure Pt electrode. The best performance for methanol electrooxidation was obtained on a ternary platinum based catalyst modified by upd-Ru and upd-Sn simultaneously. The influence of the submonolayers of upd-Ru adatoms and upd-Sn adatoms on the oxidation of methanol in acid has been investigated. The effect of Ru on methanol electrooxidation lies on the distribution of Ru adatoms on a Pt surface. It has been shown that as long as the amount of upd-Ru deposits were controlled in a proper range, upd-Ru deposits would enhance the methanol oxidation obtained on a Pt electrode at whichever deposition potential the upd-Ru deposits were obtained. The effects of tin are sensible to the potential range. The enhancement effect of upd-Sn adatoms for the oxidation of methanol will disappear as the electrode potential is beyond a certain value. It is speculated that there exists a synergetic effect on the Pt electrode as adatoms Ru and Sn participate simultaneously in the methanol oxidation.     

Nickel modified ionic liquid/carbon paste electrode for highly efficient electrocatalytic oxidation of methanol in alkaline medium

In this study, the electrocatalytic oxidation of methanol at nickel modified ionic liquid/carbon paste electrode (Ni/IL/CPE) in alkaline medium is presented. The ionic liquid, 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, is incorporated into the electrode as a binder. Electrochemical impedance spectroscopy is employed to evaluate the electron transfer rate of this electrode. Ni(II) ions are incorporated into the electrode by immersion of this electrode in 1.0?M nickel sulfate solution. Cyclic voltammetry and chronoamperometry techniques are used for the electrochemical study of this modified electrode in the absence and the presence of methanol. The effect of methanol concentration on the anodic peak current shows an increase in the anodic peak current up to 1.25?M. Current density of Ni/IL/CPE for methanol oxidation in alkaline media is investigated by comparison with some of the previously reported electrodes. Results show that this electrode exhibits a high efficient electrocatalytic activity toward the oxidation of methanol with the current density of 17.6?mA?cm^?2. The rate constant for chemical reaction between methanol and redox sites of electrode is calculated. This new proposed electrode is simple and efficient enough, and it can be widely used as anode in direct methanol fuel cell.     

Electrocatalytic oxidation of methanol on Pt/NiZn electrode in alkaline medium

In this study, a platinum electrode was coated with NiZn layer (Pt/NiZn) in a nickel-zinc bath by electrodeposition for use as anode material for methanol electrooxidation in alkaline solution. The electrode prepared was etched in a concentrated alkaline solution (30% NaOH) to produce a porous and electrocatalytic surface suitable for use in the methanol electrooxidation (Pt/NiZn). The surface morphologies and compositions of coating before and after alkaline leaching were determined by energy dispersive X-ray (EDX) and scanning electron microscopy (SEM) techniques. The effect of NiZn coated platinum electrode for methanol electrooxidation was investigated in 1 M NaOH solution by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) techniques. Methanol electrooxidation on Pt/NiZn electrode was studied at various temperatures and potential scan rates. The results showed that Pt/NiZn electrode behaved as an efficient catalyst for the electrooxidation of methanol in alkaline medium.     

Electro-oxidation of methanol catalysed by porous nanostructured Fe/Pd-Fe electrode in alkaline medium

Nanostructured Fe/Pd-Fe catalysts are prepared first by the deposition of Fe-Zn onto the Fe electrode surface, followed by replacement of the Zn by Pd at open circuit potential in a Pd-containing alkaline solution. The surface morphology and composition of coatings are determined by scanning electron microscopy and energy dispersive X-ray techniques. The results show that the Fe/Pd-Fe coatings are porous structure and the average particle size of Pd-Fe is low, in the range of 30–80 nm. The electrocatalytic activity and stability of Fe/Pd-Fe electrodes for oxidation of methanol are examined by cyclic voltammetry and chronoamperometry techniques. The new Fe/Pd-Fe catalyst has higher electrocatalytic activity and better stability for the electro-oxidation of methanol in an alkaline media than flat Pd and smooth Fe catalysts. The onset potential and peak potential on Fe/Pd-Fe catalysts are more negative than that on flat Pd and smooth Fe electrodes for methanol electro-oxidation. All results show that the nanostructured Fe/Pd-Fe electrode is a promising catalyst towards methanol oxidation in alkaline media for fuel cell applications.     

Electrodeposited Pt and Pt-Sn nanoparticles on Ti as anodes for direct methanol fuel cells

Electro-oxidation of methanol was studied on titanium supported nanocrystallite Pt and Pt_x-Sn_y catalysts prepared by electrodeposition techniques. Their electro-catalytic activities were studied in 0.5mol/L H₂SO₄ and compared to those of a smooth Pt, Pt/Pt and Pt-Sn/Pt electrodes. Platinum was deposited on Ti by galvanostatic and potentiostatic techniques. X-ray diffractometer (XRD) and energy dispersive X-ray (EDX) techniques were applied in order to investigate the chemical composition and the phase structure of the modified electrodes. Scanning electron microscopy (SEM) was used to characterize the surface morphology and to correlate the results obtained from the two electrochemical deposition methods. Results show that modified Pt/Ti electrodes prepared by the two methods have comparable performance and enhanced catalytic activity towards methanol electro-oxidation compared to Pt/Pt and smooth Pt electrodes. Steady state Tafel plots experiments show a higher rate of methanol oxidation on a Pt/Ti catalyst than that on a smooth Pt.  Introduction of a small amount of Sn deposited with Pt improves the catalytic activity and the stability of prepared electrode with time as indicated from the cyclic votlammetry and the chronoamperometric experiments. The effect of variations in the composition for binary catalysts of the type Pt_x-Sn_y/Ti towards the methanol oxidation reaction is reported. Consequently, the Pt_x-Sn_y/Ti (x∶y (8∶1), molar ratio) catalyst is a very promising one for methanol oxidation.     

Electrocatalytic oxidation of methanol at platinum electrode modified with Eu-Fe cyanide-bridged binuclear complexes

<正>The electrocatalytic oxidation of methanol at the platinum electrode modified with Eu-Fe cyanide-bridged binuclear complexes (Eu-Fe film) was investigated for the first time by cyclic voltammetry.Compared with the bare platinum electrode,the results showed that the modified electrode had excellent electrocatalytic activity for the oxidation of methanol;the oxidation peak potential shifted more negatively and the peak current increased about twenty times.The electrooxidation of methanol at the modified electrode with Eu-Fe cyanide-bridged binuclear complexes material exhibited the better tolerance capacity to poison of intermediate species;the peak current was proportional to the concentration of methanol in the range of 0.5-2.0mol/L (R~2 = 0.9991,n =7),which was a comparatively wider linear range.Moreover,based on the linear relationship between the peak current and the square root of scan rate,electrocatalytic oxidation process of methanol was confirmed to be a diffusion control process.Furthermore,according to the counting of electron transfer number(n_α) in the rate-limiting step and the slope of linear equation between acidity of electrolyte and the oxidation peak potential(E_p),the possible mechanism of the electrooxidation of methanol at the modified electrode was primarily discussed.     

The origin of the high performance of tungsten carbides/carbon nanotubes supported Pt catalysts for methanol electrooxidation

The Pt supported on WC modified MWCNT catalysts (PtWC/MWCNT) were synthesized by the combination of organic colloidal and intermittent microwave heating (IMH) methods for the first. The results proved the better performance of the PtWC/MWCNT catalyst than that of Pt/C for methanol oxidation in terms of the onset potential and peak current density. The synergistic effect between Pt nanoparticles and WC and the structure effect of the MWCNTs could be the reasons to result in the high activity. The CO stripping test provided the evidence that the onset potential shift for methanol oxidation is consistent with the reduction in the overpotential for the CO oxidation on PtWC/MWCNT catalyst. Therefore, the mechanism of the high performance for methanol oxidation on PtWC/MWCNT catalyst is probably the easier oxidation of CO-like species which cause high overpotential for further oxidation of methanol.     

Neutral red as electron transfer mediator: enhanced electrocatalytic activity of platinum catalyst for methanol electro-oxidation

Organic molecule neutral red (NR), as electron transfer mediator, was introduced in the anodic electrocatalyst system for methanol oxidation and the resulting electrode was investigated by cyclic voltammetry, polarization method, and electrochemical impedance spectroscopy. For the same loading mass of platinum catalyst, 1.25 times larger exchange current density, 1.83 times higher specific activity, and better long-term cycle stability can be obtained at Pt/NR/graphite electrode, as compared to the electrode without NR. These results indicate that neutral red plays an important role on the enhanced electrocatalytic activity of platinum catalyst for methanol oxidation.     

柔性Pd@PANI/rGO纸阳极在甲醇燃料电池中的应用

利用脉冲电压法在自组装制得的柔性石墨烯纸表面聚合聚苯胺,以该复合材料作为甲醇燃料电池的阳极电极基体,采用循环伏安法在其表面电沉积纳米Pd制备出无需外加粘接和支撑的催化电极。通过扫描电子显微镜、X射线光电子能谱和红外光谱分析该材料的表面形貌和化学组成,并通过电化学测试该电极在甲醇氧化过程中的催化性能。结果表明,该阳极材料柔韧性好,原料利用率高,聚苯胺在石墨烯纸表面分散良好,形貌均一,聚苯胺的存在提高了催化剂的催化效率,使得甲醇的氧化峰电流密度从3 mA·mg~(-1)提高到67 mA·mg~(-1),且延长了催化剂的使用寿命,正向与反向扫描的阳极峰值电流密度的比值(jf/jb值)达到5.7。     

MEA with double-layered catalyst cathode to mitigate methanol crossover in DMFC

Methanol permeation is one of the key problems for direct methanol fuel cell (DMFC) applications. It is necessary to change the structure of the cathode of membrane electrode assembly (MEA). Therefore, a novel MEA with double-layered catalyst cathode was prepared in this paper. The double-layered catalyst consists of PtRu black as inner catalyst layer and Pt black as outer catalyst layer. The inner catalyst layer is prepared for oxidation of the methanol permeated from anode. The results indicate that this double-layered catalyst reduced the effects of methanol crossover and assimilated mixed potential losses. The performance of MEA with double-layered catalyst cathode was 52.2 mW cm⁻², which was a remarkable improvement compared with the performance of MEA with traditional cathode. The key factor responsible for the improved performance is the optimization of the electrode structure.     

Spherical carbon capsules with hollow macroporous core and mesoporous shell structures as a highly efficient catalyst support in the direct methanol fuel cell

Carbon capsules with hollow core and mesoporous shell (HCMS) structures were used as a support material for Pt(50)-Ru(50) catalyst, and the catalytic performance of the HCMS supported catalyst in the direct methanol fuel cell was described; the HCMS carbon supported catalysts exhibited much higher specific activity for methanol oxidation than the commonly used E-TEK catalyst by about 80%, proving that the HCMS carbon capsules are an excellent support for electrode catalysts in DMFC.     

具有优异甲醇催化氧化性能的Pt/MoO3-WO3/CNTs催化剂

以聚二烯丙基二甲基胺盐酸盐(PDDA)为连接剂,采用原位自组装方式将MoO3和WO3负载到碳纳米管(CNTs)上,然后通过乙二醇还原法负载Pt纳米颗粒,得到Pt纳米颗粒均匀分布的Pt/MoO3-WO3/CNTs催化剂.当氧化物总量控制在10 wt%,MoO3与WO3摩尔比为1:0.5时,Pt/MoO3-WO3/CNTs催化剂催化甲醇氧化活性最高,甲醇氧化峰电流If高达835 A/gPt.WO3和MoO3的加入提高了催化剂的甲醇氧化活性、抗CO中毒能力和稳定性,使得Pt/MoO3-WO3/CNTs催化剂表现出优异的甲醇电催化氧化性能.     

Characterization of stainless steel electrode modified by a thin film of polyaniline containing pt particles and its electrocatalytic activity for methanol oxidation

The catalytic behavior of stainless steel (SS) electrode modified by a thin film of polyaniline (PANI) containing platinum particles was studied for electrooxidation of methanol and compared with a platinated Pt/PANI electrode in acidic aqueous solution. Cyclic voltammetry (CV), chronoamperometry, CO stripping techniques were used to investigate electrochemical properties and electrocatalytic activity of SS/PANI/Pt and Pt/PANI/Pt electrodes. The morphology and particle size of Pt catalysts were characterized by Transmission Electron Microscopy (TEM) measurement. The effects of various parameters such as thickness of polymer film, medium temperature and stability of the modified electrodes on methanol oxidation were also investigated. The results indicated that the modified SS electrode exhibited a considerably high electrocatalytic activity on the methanol oxidation as well as the modified Pt electrode.     

NaOH溶液中Ni基石墨修饰电极上甲醇电氧化过程中钴与铜的协同效应

在NaOH溶液(0.1 mol/L)中考察了Ni, Co和Cu二元和三元合金修饰的石墨电极上甲醇电氧化反应性能.采用循环伏安法、计时电流法和电化学阻抗谱(EIS)等技术研究了修饰电极的催化活性和协同效应.这些催化剂在含有Ni, Cu和Co离子溶液的阴极电位上反复浸渍石墨电极制得.结果表明,在甲醇存在下, Ni基三元合金修饰电极(G/NiCuCo)对甲醇氧化反应的响应值明显高于其它样品.阳极峰值电流与扫描速率的平方根呈线性关系,表明该过程受扩散控制.在CA区域,该反应遵循Cottrellin特性,甲醇扩散系数为6.25×10–6 cm2/s.甲醇氧化反应速率常数为40×107 cm3/(mol·s).另外,采用EIS研究了修饰电极表面上甲醇催化氧化反应.     

Electrochemical behavior of Ni(II) incorporated in zeolite Y-modified carbon electrode: application for electrocatalytic oxidation of methanol in alkaline solution

Nickel ions were incorporated in NaY zeolite according to cation exchange mechanism. Then NiY zeolite was used as modifier for preparation of modified carbon paste electrode. The electrochemical behavior of NiY-modified carbon paste electrode (NiY/CPE) was studied in alkaline solution using cyclic voltammetry method. Ability of different electrodes containing NiY/CPE, Ni-NiY/CPE, Ni-NaY/CPE, and Ni/CPE for electrocatalytic oxidation of methanol was compared (three last electrodes prepared by open circuit accumulation of Ni(II) ions on the surface of NiY/CPE, NaY/CPE, and bare CPE, respectively). Results show that Ni-NiY/CPE is best catalyst for the electrochemical oxidation of methanol in alkaline solution and both process of earlier Ni ion incorporation through cation exchange in NaY zeolite and open circuit accumulation of Ni ion on the surface of electrode are essential to have good catalyst. Effect of graphite–zeolite ratio on electrocatalytic current was studied and 3:1 ratio of graphite–zeolite was selected as optimum ratio for preparing electrode. Ni-NiY/CPE has very good stability toward the methanol oxidation in concentration range of 0.005 to 0.5 M. Finally, using chronoamperometric method, the catalytic rate constant (k) for methanol was found to be 1.56 × 10⁴ cm³ mol⁻¹ s⁻¹.     

碱性介质中铂/碳气凝胶电催化氧化甲醇

以间苯二酚和甲醛为原料,采用溶胶-凝胶法制备了碳气凝胶(CAs);以CAs为载体,利用乙二醇还原法制备了Pt/CAs催化剂;在碱性条件下,采用循环伏安法测定了Pt/CAs催化剂电催化氧化甲醇的活性,结果表明,Pt/CAs显示出高的甲醇氧化催化活性,在1.0mol.L-1 NaOH和1.0mol.L-1 CH3OH溶液中,其峰电流密度是商品Vulcan XC-72R负载Pt催化剂Pt/C的3.9倍,甲醇起始氧化电位比Pt/C的负移约100mV.     

碱性溶液中电聚酪胺-铜草酸盐纳米复合物修饰铜电极电催化甲醇氧化(英文)

A polytyramine-copper oxalate nanocomposite modified copper(PTCOxNMC) electrode prepared by electropolymerization was examined for electrocatalytic activity towards the oxidation of methanol in alkaline solution using cyclic voltammetry and impedance spectroscopy. The prepared PTCOxNMC electrode showed a significantly high response for adsorbed methanol oxidation. The effects of various parameters such as potential scan rate and methanol concentration on the electrocatalytic oxidation at the surface of the PTCOxNMC electrode were investigated. Spectrometry techniques such as Fourier transform infrared spectroscopy and scanning electron microscopy were used to determine the surface physical characteristics of the modified electrode and revealed that the polytyramine-copper oxalate nanocomposite particles were highly dispersed on the surface of the copper electrode with a narrow size up to 40 nm. The very high current density obtained for the catalytic oxidation may have resulted from the high electrode surface area caused by modification with the poly-tyramine-copper oxalate nanocomposite.     

A novel Pt/Au/C cathode catalyst for direct methanol fuel cells with simultaneous methanol tolerance and oxygen promotion

A novel Pt/Au/C catalyst was prepared by depositing the Pt and Au nanoparticles on the carbon support. The synthesized catalysts were characterized by energy-dispersive X-ray (EDX) and transmission electron microscopy (TEM), and electrochemically analyzed for activity towards oxygen-reduction reaction and methanol oxidation reaction. EDX and TEM results reveal that Pt nanoparticles supported on carbon supports were separated by Au nanoparticles. The electrochemical analysis indicate that the novel catalyst showed the enhanced methanol tolerance while maintaining a high catalytic activity for the oxygen-reduction reaction, which could be attributed to the less methanol adsorption on Pt/Au/C catalyst.