Essential oil of <Emphasis Type="Italic">Laurus nobilis</Emphasis> from Montenegro

Steam distilled oil from the shoots, separated leaves, and stem, as well as from the flower of laurel (Laurus nobilis), grown in Montenegro, were analyzed by GC and GC/MS. The yield of essential oil was as follow: 1.4% in young shoots, 1.5% in the separated leaves, and 0.7% in separated stems. The main constituents of all investigated oils were 1,8-cineole, methyleugenol, and α-terpinyl acetate. Besides, α-pinene, β-pinene, sabinene, and linalool were also present. It was interesting and important for commercial samples of laurel essential oil that there was no significant difference among the essential oil obtained from young shoots and those obtained from leaves and stem. The main constituents of the flower oil were 1,8-cineole (15.7%), β-caryophyllene (9.5%), γ-muurolene (7.1%), α-terpinyl acetate (6.5%), and methyleugenol (3.9%). Published in Khimiya Prirodnykh Soedinenii, No. 4, pp. 337–339, July–August, 2007.     

Contribution à la connaissance des o-menthols et des o-menthones (carquéjanols et carquéjanones) - 1ère communication

The mixture of carquejanols obtained from carquejol of carqueja oil has been converted in ketones. The alkohols obtained respectively by hydrogenation on Pt(O₂), by lithium-aluminiumhydride reduction and by Meerwein-Ponndorf-Verley reaction have been separated by vapour phase chromatography. The ketones obtained from the Beckmann oxidation of the alkohols has been identified as carquejanone and isocarquejanone by application of the Auwers-Skita rule.     

Sur la composition de l'arôme de thé noir II

Trans-2-penten-1-ol, 1-ethyl-2-formyl-pyrrole, 2-trans, 4-cis-heptadienal, phenyl-acetonitrile, methyl benzoate, 2-phenyl-but-2-enal and the lactone of 2,6,6-trimethyl-2-hydroxy-cyclohexylidene acetic acid have been separated from black tea aroma by gas-liquid chromatography, and identified by infra-red and mass spectrometry.     

Synthesis and characterization of polystyrene‐b‐poly (1,2‐isoprene‐ran‐3,4‐isoprene) block copolymers with azobenzene side groups

Polystyrene‐b‐poly(1,2‐isoprene‐ran‐3,4‐isoprene) block copolymers with azobenzene side groups were synthesized by the esterification of azobenzene acid chloride with polystyrene‐b‐hydroxylated poly(1,2‐isoprene‐ran‐3,4‐isopenre) block copolymers for creating new photochromic materials. The resulting block copolymers with azobenzene side groups were characterized for structural, thermal, and morphological properties. IR and NMR spectroscopies confirmed that the polymers obtained had the expected structures. Differential scanning calorimetric measurements by heating runs clearly showed the glass transitions of polystyrene and polyisoprene main chains and two distinct first‐order transitions at temperatures of azobenzene side groups around 48 and 83 °C. The microstructure of these block copolymer films was investigated using both transmission electron microscopy (TEM) and near‐field optical microscopy (NOM). TEM images revealed typical microphase‐separated morphologies such as sphere, cylinder, and lamellar structures. The domain spacing of microphase‐separated cylindrical morphology in the NOM image agreed with that of the TEM results. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2406–2414, 2002     

Stereoselective Self‐Aggregation of 31‐Epimerically Pure Amino Analogs of Zinc Bacteriochlorophyll‐d in an Aqueous Micelle Solution

Zinc bacteriochlorophyll‐d analogs possessing an amino group instead of the original hydroxy group at the C3¹ position were prepared by chemical modification of naturally occurring chlorophyll‐a. The synthetic 3¹‐epimers were successfully separated by reverse phase HPLC to give diastereomerically pure samples. The stereochemistry of the chiral C3¹‐center in the separated amines was determined by NMR analysis of their diastereomeric amides as well as by their asymmetric synthesis from authentic stereoisomers. Both the epimers were monomeric in tetrahydrofuran to give sharp electronic absorption bands, while they self‐aggregated to form chlorosomal oligomers with the redshifted bands in an aqueous Triton X‐100 micelle solution (pH = 6.9). The resulting oligomers deaggregated by addition of p‐toluenesulfonic acid to give monomeric N‐protonated ammonium species. The aggregation and deaggregation were dependent on the 3¹‐stereochemistry, indicating that each epimer produced supramolecularly different self‐aggregates.     

N‐Benzyl‐4‐methyl‐N‐[(3aR*,4R*,7aR*)‐6,6,7a‐tri­methyl­per­hydro­inden‐4‐yl]­benzene­sulfon­amide

The synthesis, spectroscopic data and X‐ray structural analysis of the title compound, C₂₆H₃₅NO₂S, (I), are described. The crystal contains discrete mol­ecules separated by normal van der Waals distances. The benzene­sulfon­amide derivative of the corresponding amine allows the assigment of its relative configuration. The secondary amine has been synthesized via a sequential multi‐step hydro­formyl­ation procedure according to Eilbracht et al. [Chem. Rev. (1999), 99 , 3329–3365].).     

Microphase‐Separated Brushes on Square Platelets in PS‐b‐PEO Thin Films

In polystyrene‐block‐poly(ethylene oxide) thin films, microphase‐separated brushes on the square platelets can be obtained via fast solvent evaporation by controlling the tethering density (0.08 < σ < 0.11). The tethering density of the brushes is proportional to the thickness of the PEO crystal and increases with increasing initial solution heating temperature (T_i). When T_i < T_m, where T_m is the melting point of PEO, brushes with microphase‐separated structures are observed. The formation of microphase‐separated brushes depends on two factors: the strong incompatibility between PS and noncrystalline PEO chains (attached to the crystalline PEO) and the weak interaction between PS‐PS brushes.

     

Direct observation of morphological development during the spin‐coating of polystyrene–poly(methyl methacrylate) polymer blends

We present results of the direct observation, in real‐space, of the phase separation of high molecular weight polystyrene and poly(methyl methacrylate) from ortho‐xylene using our newly developed technique of high speed stroboscopic interference microscopy. Taking a fixed concentration (3 wt % in o‐xylene) at a fixed composition (1:4 by weight) and by varying the rotational rate during the spin‐coating process, we are able to observe the formation of a range of phase separated bicontinuous morphologies of differing length‐scales. Importantly, we are able to show that the mechanism by which the final phase separated structure is formed is through domain coarsening when rich in solvent, before vitrification occurs and fixes the phase separated structure. The ability to directly observe morphological development offers a route toward controlling the length‐scale of the final morphology through process control and in situ feedback, from a single stock solution. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B Polym. Phys. 2013, 51, 875–881     

Preparation and Evaluation of a Novel Cellulose Tris(N‐3,5‐dimethylphenylcarbamate) Chiral Stationary Phase

A novel cellulose tris(N‐3,5‐dimethylphenylcarbamate) (CDMPC) chiral stationary phase (CSP) was prepared by coating CDMPC on TiO₂/SiO₂, which was prepared by coating titania nanoparticles on silica through a self‐assemble technique. At first, 2‐hydroxyl‐phenyl acetonitrile and α‐phenylethanol were separated on this new CSP to evaluate the chiral separation ability. Then, two pesticides, matalaxyl and diclofop‐methyl were separated. The influence of the mobile phase composition on the enantioselectivity was discussed, and the repeatability and stability of the CSP were studied too.     

Utilisation d'ylides du phosphore en chimie des sucres VII. Synthèse de sucres ramifiés des types «streptose» et «apiose». Communication préliminaire

A new high-yielding route to branched-chain sugars of the streptose or the apiose type having at the branching point a configuration epimeric with that which would be obtained by the classical synthesis using Grignard reagents is described. The main steps are the preparation of branched-chain unsaturated cyano sugars by reaction of cyanomethylene triphenylphosphorane with keto sugars and the cis-dihydroxylation (KMnO₄) of the so obtained cyano sugars. The cis and the trans isomers of a series of cyanovinylidenic sugars have been separated and the stereodependence of the long-range coupling constants in this class of compounds has been examined.     

Synthesis,Separation, and Theoretical Studies of Chiral Biphenyl Lignans (α‐ and β‐DDB)

Two biphenyl lignans, α‐ and β‐DDB ( 1 and 2 , respectively) were efficiently synthesized without contamination by other regio‐isomers. The different yields of the Ullmann coupling reactions for the synthesis of 1 and 2 were rationalized by calculating steric hindrance, stability, entropy change, and heat‐of‐formation values. The enantiomers of 1 and 2 were readily separated by HPLC on a chiral stationary phase. Their configurations were assigned based on the Cotton effect of the authentic natural products.     

Evaluation of the chemical consistency of Yin‐Chen‐Hao‐Tang prepared by combined and separated decoction methods using high‐performance liquid chromatography and quadrupole time‐of‐flight mass spectrometry coupled with multivariate statistical analysis

In this study, Yin‐Chen‐Hao‐Tang prepared by two decoction methods, namely, combined decoction (modern decoction method) and separated decoction (traditional decoction method), was analyzed by high‐performance liquid chromatography with quadrupole time‐of‐flight mass spectrometry. The acquired datasets containing sample codes, t_R‐m/z pairs and ion intensities were processed with multivariate statistical analyses, such as principal component analysis and an orthogonal partial least squared discriminant analysis model, to globally compare the chemical differences between the different decoction samples. Then, the chemical differences between the combined and separated decoctions were screened out by S‐plots generated from the orthogonal partial least squared discriminant analysis model and compared with chemical information from an established in‐house library. The six components that contributed the most to the chemical differences were identified as chlorogenic acid, caffeic acid, geniposide, genipin, scopoletin, and 3,5‐dicaffeoylquinic acid. The concentrations of genipin and caffeic acid from the separated decoction were higher than those from the combined decoction, indicating that the separated decoction may present a stronger hepatoprotective effect. However, the results still require further investigation through pharmacological and clinical studies. Our findings not only establish a strategy to evaluate chemical consistency of Yin‐Chen‐Hao‐Tang but also provide the scientific basis for using traditional separated decoction method.     

A High‐Energy Charge‐Separated State of 1.70 eV from a High‐Potential Donor–Acceptor Dyad: A Catalyst for Energy‐Demanding Photochemical Reactions

A high potential donor–acceptor dyad composed of zinc porphyrin bearing three meso‐pentafluorophenyl substituents covalently linked to C₆₀, as a novel dyad capable of generating charge‐separated states of high energy (potential) has been developed. The calculated energy of the charge‐separated state was found to be 1.70 eV, the highest reported for a covalently linked porphyrin–fullerene dyad. Intramolecular photoinduced electron transfer leading to charge‐separated states of appreciable lifetimes in polar and nonpolar solvents has been established from studies involving femto‐ to nanosecond transient absorption techniques. The high energy stored in the form of charge‐separated states along with its persistence of about 50–60 ns makes this dyad a potential electron‐transporting catalyst to carry out energy‐demanding photochemical reactions. This type of high‐energy harvesting dyad is expected to open new research in the areas of artificial photosynthesis especially producing energy (potential) demanding light‐to‐fuel products.     

Synthesis of microspheres with microphase‐separated shells

Novel structural microspheres of the Janus type, with microphase‐separated polystyrene (PS) and poly(tert‐butyl methacrylate) (PBMA) shells and crosslinked poly(2‐vinyl pyridine) (PVP) cores, were synthesized with the crosslinking of PVP spherical domains in poly(styrene‐block‐2‐vinyl pyridine‐block‐tert‐butyl methacrylate) ABC triblock terpolymer film with PS/PBMA lamellae–PVP spherical structures. For the formation of lamellae‐sphere structures, toluene, which was a selective solvent for the ABC triblock terpolymer, was used. With the crosslinking of PVP spheres in the microphase‐separated film with 1,4‐diiodobutane gas, the microphase structure of the terpolymer was fixed, and microspheres composed of microphase‐separated PS and PBMA shells and P2VP cores were obtained. The size distribution of the purified microspheres was narrow. The characteristics of the microspheres and their aggregation behaviors in selective solvents were investigated by transmission electron microscopy and light scattering methods. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2091–2097, 2000     

Dicationic imidazolium ionic liquid modified silica as a novel reversed‐phase/anion‐exchange mixed‐mode stationary phase for high‐performance liquid chromatography

A dicationic imidazolium ionic liquid modified silica stationary phase was prepared and evaluated by reversed‐phase/anion‐exchange mixed‐mode chromatography. Model compounds (polycyclic aromatic hydrocarbons and anilines) were separated well on the column by reversed‐phase chromatography; inorganic anions (bromate, bromide, nitrate, iodide, and thiocyanate), and organic anions (p‐aminobenzoic acid, p‐anilinesulfonic acid, sodium benzoate, pathalic acid, and salicylic acid) were also separated individually by anion‐exchange chromatography. Based on the multiple sites of the stationary phase, the column could separate 14 solutes containing the above series of analytes in one run. The dicationic imidazolium ionic liquid modified silica can interact with hydrophobic analytes by the hydrophobic C₆ chain; it can enhance selectivity to aromatic compounds by imidazolium groups; and it also provided anion‐exchange and electrostatic interactions with ionic solutes. Compared with a monocationic ionic liquid functionalized stationary phase, the new stationary phase represented enhanced selectivity owing to more interaction sites.     

Layered‐Double‐Hydroxide‐Supported Rhodium(0): An Efficient and Reusable Catalyst for the Heck‐Type Coupling of Alkenes and Arylboronic Acids

Layered‐double‐hydroxide‐supported nanorhodium catalyst (LDH? Rh(0)) was employed in the Heck‐type coupling of alkenes 1 with arylboronic acids 2 to afford the corresponding substituted alkenes 3 in good to high yields (Table 1). The catalyst was separated by simple filtration and reused for five cycles with consistent activity.     

Polymorphism in 3‐acetyl‐4‐hydroxy‐2H‐chromen‐2‐one

A new polymorph (denoted polymorph II) of 3‐acetyl‐4‐hydroxy‐2H‐chromen‐2‐one, C₁₁H₈O₄, was obtained unexpectedly during an attempt to recrystallize the compound from salt–melted ice, and the structure is compared with that of the original polymorph (denoted polymorph I) [Lyssenko & Antipin (2001). Russ. Chem. Bull. 50 , 418–431]. Strong intramolecular O—H...O hydrogen bonds are observed equally in the two polymorphs [O...O = 2.4263 (13) Å in polymorph II and 2.442 (1) Å in polymorph I], with a slight delocalization of the hydroxy H atom towards the ketonic O atom in polymorph II [H...O = 1.32 (2) Å in polymorph II and 1.45 (3) Å in polymorph I]. In both crystal structures, the packing of the molecules is dominated and stabilized by weak intermolecular C—H...O hydrogen bonds. Additional π–π stacking interactions between the keto–enol hydrogen‐bonded rings stabilize polymorph I [the centres are separated by 3.28 (1) Å], while polymorph II is stabilized by interactions between α‐pyrone rings, which are parallel to one another and separated by 3.670 (5) Å.     

X-Ray and 1H-NMR Configurational Assignment of Valofan (α-Allphanoyl-α-allyl-γ-valerolactone) Diastereoisomers

The two diastereoisomers of valofan were separated by semi-preparative HPLC. The preferred solution conformation of the two diastereoisomer was established by ¹H-NMR spectroscopy. The spectra could be interpreted in confirgurational terms. The configuration of the more lipophilic isomer was ascertained bty X-ray crystallography as r-2-allophanoyl-2-allyl-t-4-methylbutyrolactone.     

Synthesis of <Emphasis Type="Italic">tert</Emphasis>-butyl 1-(5,8-dioxohexahydro-[1,3]thiazolo[3,4-<Emphasis Type="Italic">a</Emphasis>]pyrazin-3-yl)ethylcarbamate

Two diastereomers of the previously unknown diketopiperazines tert-butyl 1-(5,8-dioxohexahydro-[1,3]thiazolo[3,4-a]pyrazin-3-yl)ethylcarbamate were synthesized and separated by column chro-matography on silica gel. During the cultivation of the crystal of one of compounds, the product was oxidized to corresponding tert-butyl 1-(5,8-dioxo-5,6,7,8-tetrahydro[1,3]thiazolo[3,4-a]pyrazin-3-yl)-ethylcarbamate. The X-ray crystal structure of the latter was established.     

Synthesis of chiral glycolurils from (<Emphasis Type="Italic">S</Emphasis>)-(+)- and (<Emphasis Type="Italic">R</Emphasis>)-(-)-1-<Emphasis Type="Italic">sec</Emphasis>-butyl-3-methylurea

Chiral dialkyl- and tetraalkylglycolurils have been obtained using chiral (S)-(+)- and (R)-(-)-1-sec-butyl-3-methylurea as starting materials. The diastereomer (S)-(+)-2,6-di-sec-butyl-4,8-dimethyl-2,4,6,8-tetraazabicyclo[3.3.0]-octane-3,7-dione was separated into stereoisomers, for the higher melting of which the absolute configuration was determined as (S,S,S,S) by X-ray structural analysis.