Adsorption of ionic surfactants at an expanding air-water interface

A quantitative model for the kinetics of adsorption of ionic surfactants to an expanding liquid surface is presented for surfactant concentrations below and above the critical micelle concentration (cmc). For surfactant concentrations below the cmc, the electrostatic double layer is accounted for explicitly in the adsorption isotherm. An overflowing cylinder (OFC) was used to create nonequilibrium liquid surfaces under steady-state conditions. Experimental measurements of the surface excess for solutions of cationic surfactants CH3(CH2)n-1N+(CH3)3 Br- (CnTAB, n = 12, 14, 16) and the anionic fluorocarbon surfactant sodium bis(1H,1H-nonafluoropentyl)-2-sulfosuccinate (di-CF4) in the OFC are in excellent agreement with the theoretical predictions for diffusion-controlled adsorption for all concentrations studied below the cmc. For surfactant concentrations above cmc, the diffusion ofmicelles and monomers are handled separately under the assumption of fast micellar breakdown. This simplified model gives excellent agreement for the system C14TAB + 0.1 M NaBr above the cmc. Agreement between theory and experiment for C16TAB + 0.1 M NaBr is less good. A plausible explanation for the discrepancy is that micellar breakdown is no longer fast on the time scale of the OFC (ca. 0.1 s).     

Presence or absence of counterion specificity in the interaction of alkylammonium surfactants with alkylacrylamide gels

Patterns in the interaction of cationic surfactants with nonionic polymer gels, which were inferred from a recent study from our laboratory, are confirmed by measurements of a series of alkylammonium surfactants with different counterions with a series of alkyl acrylamide gels of increasing hydrophobicity. Two swelling patterns were observed: Either the swelling continued above the surfactant critical micelle concentration (cmc) and the maximum swelling differed for different counterions and increased in the order of Br-相似文献   

Hydrophobicity and counterion effects on the binding of ionic surfactants to uncharged polymeric hydrogels

Gel swelling experiments have been used to study the binding of ionic surfactants to a series of nonionic alkylacrylamide hydrogels of increasing hydrophobicity. The binding of hexadecyl trimethylammonium (C16TA+) to uncharged gels is sensitive to both the hydrophobicity of the gel and the counterion to the surfactant. There is a minimum hydrophobicity threshold below which binding of the surfactant does not occur, and this is influenced by the counterion to the surfactant. The surfactant concentration at the onset of binding, the critical association concentration (cac), decreases with increasing gel hydrophobicity. The maximum swelling of the gel (at intermediate network hydrophobicity) increases in the order of the Hofmeister series of anions, bromide (Br-) < chloride (Cl-) < acetate (Ac-). At higher gel hydrophobicity, differences in swelling are no longer observed on changing the counterion. A minimum hydrophobicity threshold was also found for the binding of the anionic surfactants sodium dodecyl sulfate (SDS) and sodium dodecyl-di(ethylene oxide)-sulfate (SD-(EO)2-S). Differences in the swelling behavior with network hydrophobicity are explained in terms of the degree of saturation of the gel with surfactant at the cmc.     

Competition between aggregation and hydrolysis in the reaction of arylperfluorooctanoates in micellar solutions

The rate of hydrolysis of phenyl and p-nitrophenyl perfluorooctanoate (2a and 2b) was measured in water and in the presence of different cationic (dodecyltrimethylammonium chloride, dodecyltrimethylammonium bromide, cetyltrimethylammonium bromide), anionic (sodium dodecyl sulfate (SDS) and perfluorooctanoate (PFO)) and neutral (Brij-35) surfactants. In water solution, the formation of phenol from 2a and p-nitro phenol from 2b takes place through two kinetic processes, both of which are much slower than the expected rate of hydrolysis for the monomeric compounds in water. The two kinetic processes are attributed to a coupling of the rates of hydrolysis and aggregation of the substrates. In the presence of charged surfactants at concentrations below the respective critical micellar concentration (cmc), two relaxation times are also observed. These are of the same order of magnitude as the substrates alone in the case of SDS, but faster for the cationic surfactants. At some concentration above the cmc, all the surfactants, except for PFO, showed a clean pseudo-first-order behavior attributed to the hydrolysis of the substrate incorporated into the micellar phase. In cationic micelles, the rates for 2a are slower and those for 2b are faster than the value expected for the monomer in water. The difference in behavior is attributed to the location of the substrates in the micellar phase and to the charge distribution in the transition state of the reactions. It is shown that the reactions in the micellar phase are catalyzed by the buffer PO4H(2-)/PO4H2(-). The reactions in SDS micelles are faster than those in water but slower than the estimated value for the monomer in water. The rate of the reactions in the presence of nonionic surfactant has values between those in cationic and anionic surfactants, that is, the rates are k(cationic) > k(nonionic) > k(anionic.) The behavior of 2a and 2b in water and in micellar solutions indicates that the substrates form aggregates in water at a rate that competes with the rate of hydrolysis.     

Specific swelling behaviors of poly(4-vinyl phenol) gels in tetraalkylammonium chloride solutions

Swelling behaviors of poly(4-vinyl phenol) (P4VPh) gel in aqueous tetraalkylammonium chloride (TAACl) solutions were investigated to find a very specific swelling behavior. Especially for the tetrabutylammonium chloride (TBACl) system, P4VPh gel remarkably deswelled with increasing salt concentration (/= ca. 2.1 M). A similar swelling profile was also observed in the swelling time-course; upon immersion of a water-swollen P4VPh gel into 2.5 M TBACl solution, the gel first deswelled in an early stage (approximately 0.1 h) and then remarkably reswelled with time. Relative amounts (mol/mol) of TBA cation and water per monomer residue were estimated as ca. 1 and 0 for the deswollen state and 5 and 50 for the reswollen state, respectively. This result, together with those of attenuated total reflection Fourier transform infrared measurements performed for the gels swollen in various kinds of TAACl and inorganic salt solutions, suggested that in the highly deswollen and almost dehydrated state, phenol rings aggregated with intervening TBA cations, while the aggregation reswelled upon further binding with TBA cations.     

Body temperature-responsive gels derived from hydroxypropylcellulose bearing lignin II: adsorption and release behavior

The lower critical solution temperature (LCST) of hydroxypropylcellulose bearing lignin (HPC-L) prepared from unbleached pulp depends on the amount of residual lignin. An HPC-L gel having thermal properties reflective of original HPC-L was prepared using ethyleneglycol diglycidylether as a crosslinker, as previously reported [Uraki et al. (2004) Carbohydr. Polym. 58:123–130], and the volume transition temperature was detected as an endothermic peak by differential scanning calorimetry (DSC). The adsorption and release behavior of the guest molecules to/from this gel was then examined. When the adsorption of cationic and anionic guests was compared, cationic methylene blue (MB) was adsorbed in larger amounts than anionic methyl orange (MO). In addition, MB adsorption into the HPC-L gel was greater than MB adsorption into the HPC gel prepared from commercially available HPC. This suggests that residual lignin affects the adsorption of organic dyes. Significant differences were not observed with respect to the release of MB from HPC-L at 38 °C and lower temperatures. In the adsorption of surfactants, marked adsorption at around the critical micelle concentration of the ionic surfactants and gel swelling were observed. Such swelling did not occur in the aqueous nonionic surfactant solution, although the nonionic surfactant was adsorbed into the gel. Gel swelling may have been caused by the electrostatic repulsion of the ionic surfactants adsorbed onto the polymer chains within the gel structure.     

Sorption of a fluorescent whitening agent (Tinopal CBS) onto modified cellulose fibers in the presence of surfactants and salt

The combined effect of salt (10 mmol L(-1)) and surfactants on the sorption of the fluorescent brightener 4,4'-distyrylbiphenyl sodium sulfonate (Tinopal CBS) onto modified cellulose fibers was studied. Sorption efficiencies with both cationic and anionic surfactants were evaluated. Emission spectroscopy was used for quantitative analysis since Tinopal has an intense fluorescence. The sorption efficiency of the brightener is greater for solutions containing a cationic surfactant (DTAC) below the critical micelle concentration (cmc), while for an anionic surfactant (SDS) above its cmc the efficiency is greater. The profile of the sorption isotherms were interpreted in terms of the evolution of surfactant aggregation at the fiber/solution interface. Salt influences the efficiency of the Tinopal sorption on the modified cellulose fibers either because it decreases the cmc of the surfactants or because the ions screen the surface charges of the fiber which decreases the electrostatic interaction among the charged headgroup of the surfactant and the charged fiber surface.     

Effects of chemical modifications on the swelling behaviors of poly (4-vinyl phenol) gel

Poly (4-vinyl phenol) (P4VPh) gels were prepared by crosslinking with a hydrophilic crosslinker [ethyleneglycoldiglycidylether (EGDGE)] and a hydrophobic one [diglycidyl 1,2-cyclohexane dicarboxylate (DGCHDC)], and the former gel was further modified by CH₃I or C₂H₅I to partially convert the hydrogen of phenol OH to the corresponding alkyl groups. Swelling behaviors of P4VPh gels, thus modified, were investigated to see how the hydrophobic groups introduced to the crosslinker and the polymer substrate affect the super salt resistivity to inorganic ions and the high water content (>90%) that have been observed for the original P4VPh gel. Water content and salt resistivity were unexpectedly preserved even for the modified gels. Effects of the chemical modifications on the gel swelling were only observed in the presence of hydrophobic solutes, i.e., tetrabutyl ammonium chloride and ionic surfactants. All these results strongly suggest that hydration around the polymer substrate in the gel phase is specifically stabilized, probably because of the coexistence of the hydrophobic hydration and the π-hydrogen-bonding hydration around the phenol ring.     

Manipulation of the adsorption of ionic surfactants onto hydrophilic silica using polyelectrolytes

This paper demonstrates the use of polyelectrolytes to modify and manipulate the adsorption of ionic surfactants onto the hydrophilic surface of silica. We have demonstrated that the cationic polyelectrolyte poly(dimethyl diallylammonium chloride), poly-dmdaac, modifies the adsorption of cationic and anionic surfactants to the hydrophilic surface of silica. A thin robust polymer layer is adsorbed from a dilute polymer/surfactant solution. The resulting surface layer is cationic and changes the relative affinity of the cationic surfactant hexadecyl trimethylammonium bromide, C16TAB, and the anionic surfactant sodium dodecyl sulfate, SDS, to adsorb. The adsorption of C16TAB is dramatically reduced. In contrast, strong adsorption of SDS was observed, in situations where SDS would normally have a low affinity for the surface of silica. We have further shown that subsequent adsorption of the anionic polyelectrolyte sodium poly(styrene sulfonate), Na-PSS, onto the poly-dmdaac coated surface results in a change back to an anionic surface and a further change in the relative affinities of the cationic and anionic surfactants for the surface. The relative amounts of C16TAB and SDS adsorption depend on the coverage of the polyelectrolyte, and these preliminary measurements show that this can be manipulated.     

Interaction between β‐Cyclodextrin and Mixed Cationic‐Anionic Surfactants (1): Thermodynamic Study

The interactions between β‐cyclodextrin (β‐CD) and the mixtures of cationic‐anionic surfactants in aqueous solution were investigated by surface tension and ¹H NMR measurements. It was shown that the critical micelle concentration (cmc) increased linearly with the increase of β‐CD concentration. Furthermore, β‐CD formed 1∶1 inclusion complex with both cationic and anionic surfactants in the mixed surfactant systems, and no significant selective inclusion was observed. The thermodynamic parameters of the inclusion process of β‐CD to mixed cationic‐anionic surfactants were calculated by a numerical method based on the surface tension measurements, and it was found that the inclusion process was both enthalpy and entropy favorable.     

Adsorption behavior of hydrophobin and hydrophobin/surfactant mixtures at the solid-solution interface

The adsorption of surface-active protein hydrophobin, HFBII, and HFBII/surfactant mixtures at the solid-solution interface has been studied by neutron reflectivity, NR. At the hydrophilic silicon surface, HFBII adsorbs reversibly in the form of a bilayer at the interface. HFBII adsorption dominates the coadsorption of HFBII with cationic and anionic surfactants hexadecyltrimethyl ammonium bromide, CTAB, and sodium dodecyl sulfate, SDS, at concentrations below the critical micellar concentration, cmc, of conventional cosurfactants. For surfactant concentrations above the cmc, HFBII/surfactant solution complex formation dominates and there is little HFBII adsorption. Above the cmc, CTAB replaces HFBII at the interface, but for SDS, there is no affinity for the anionic silicon surface hence there is no resultant adsorption. HFBII adsorbs onto a hydrophobic surface (established by an octadecyl trimethyl silane, OTS, layer on silicon) irreversibly as a monolayer, similar to what is observed at the air-water interface but with a different orientation at the interface. Below the cmc, SDS and CTAB have little impact upon the adsorbed layer of HFBII. For concentrations above the cmc, conventional surfactants (CTAB and SDS) displace most of the HFBII at the interface. For nonionic surfactant C(12)E(6), the pattern of adsorption is slightly different, and although some coadsorption at the interface takes place, C(12)E(6) has little impact on the HFBII adsorption.     

Effects of Surfactants on Hydride Transfer from Methylene Blue Leucodye to 2,5-Dihydroxyl-1,4-benzoquinone in Aqueous Solution

The effects of monomeric surfactants on the hydride transfer from (one electron oxidation of) methylene blue leucodye to (by) 2,5-dihydroxy-1,4-benzoquinone in aqueous solution were investigated at 25°C using a stopped-flow spectrometer. The results indicated that cationic, anionic, and zwitterionic surfactants inhibited the reaction while nonionic surfactant showed no appreciable effect on the reaction. These observations are rationalized by electrostatic factors between surfactant monomer (or micelle) and reactant with charge or the charge transfer complex of the hydride transfer reaction. Above the cmc, the effects are treated quantitatively using a kinetic model.     

Effect of amino acid surfactants on phase transition of poly(N-isopropylacrylamide) gel

The volume phase transition behavior of a poly(N-isopropylacrylamide) gel (NIPA gel) in solutions of N-acyl amino acid surfactants were studied as a function of surfactant concentration. The addition of a surfactant beyond the critical micelle concentration (cmc) produced elevation in the transition temperature of the NIPA gel and its swelling. The changes in the volume phase transition temperature and in the swelling of the NIPA gel became more significant with the decreasing size of the amino acid side chain. This result could almost be explained only by the binding amount of surfactant onto the NIPA gel regardless of molecular structure of the amino acid. The binding amount increased in the order of sodium N-lauroyl-glycinate>-alaninate>-valinate>-leucinate>or=-phenylalaninate. For an N-acyl amino acid surfactant to bind onto the NIPA gel, to increase the transition temperature, and to facilitate swelling of the gel, the steric hindrance of the amino acid side chain was more effective than its hydrophobicity.     

Emission behavior of 1-methylaminopyrene in aqueous solution of anionic surfactants

A new fluorescent probe, methylamino derivative of pyrene, has been considered to characterize the concentration dependent emission behavior of an aqueous solution of anionic surfactants, viz., SDS, DSS, and SDBS. It was found that the emission of the probe is uniquely sensitive to the changes in surfactant (anionic) concentration due to the functional group effect of the probe over the parent moiety, pyrene. Here, 1-methylaminopyrene (MAP) showed significant quenching of emission well below the critical micellar concentration (cmc) of the surfactant. Excimer emission of the probe due to the formation of premicellar aggregates of the surfactant solutions at a concentration close to but below the cmc and again an enhanced emission of the probe above the cmc were observed as a consequence of definite MAP-surfactant interactions. These observations assisted the possible quantification ofsurfactant concentrations and their chain length dependent premicellar aggregate formations. Significant monomer emission in relation to probe distribution in micelle was analytically authenticated. Dynamic light scattering (DLS) studies revealed the incorporation of the probe molecules in the micellar core. The fluorophore emission showed nonlinear behavior when the surfactant concentration was far above the cmc. Abrupt changes in the emission characteristics in relation to the micellar concentration led to the determination of the cmc of the surfactants.     

短碳链醇/水混合溶剂中表面活性剂的表面性质

对不同类型表面活性剂(阳离子型、阴离子型、非离子型、正负混合型)在短碳链醇/水混合溶剂中的表面物化性质进行了较为系统的研究,探讨了短碳链醇加入对体系Υcmc值和cmc值的影响。发现各类体系的Υcmc随短碳链醇加入的变化规律并非决定于表面活性剂类型而取决于该表面活性剂在水溶液中的饱和吸附量和Υcmc值的大小。     

Micelle-sequestered dissociation of cationic DNA-intercalated drugs: unexpected surfactant-induced rate enhancement

Detergent sequestration using micelles as a hydrophobic sink for dissociated drug molecules is an established technique for determination of dissociation rates. The anionic surfactant molecules are generally assumed not to interact with the anionic DNA and thereby not to affect the rate of dissociation. By contrast, we here demonstrate that the surfactant molecules sodium dodecyl sulfate (SDS), sodium decyl sulfate, and sodium octyl sulfate all induce substantial rate enhancements of the dissociation of intercalators from DNA. Four different cationic DNA intercalators are studied with respect to surfactant-induced dissociation. Except for the smallest intercalator, ethidium, the dissociation rate constants increase monotonically with surfactant concentration both below cmc and (more strongly) above cmc, much more than expected from electrostatic effects of increased counterion concentration. The rate enhancement, most pronounced for the bulky, multicationic, hydrophobic DNA ligands in this study, indicates a reduction of the activation energy for the ligand to pass out from a deeply penetrating intercalation site of DNA. The discovery that surfactants enhance the rate of dissociation of cationic DNA-intercalators implies that rate constants previously determined by micelle-sequestered dissociation may have been overestimated. As an alternative, more reliable method, we suggest instead the addition of excess of dummy DNA as an absorbent for dissociated ligand.     

Lattice model for the wetting transition of alkanes on aqueous surfactant solutions

Droplets of alkanes on aqueous solutions of the cationic surfactants C(n)TAB (CH3(CH2)(n-1)N+ (CH3)3Br-) exhibit a first-order wetting transition as the concentration of the surfactant is increased. A theoretical model is presented in which the surface free energy is broken down into a long-range dispersion interaction and a short-range interaction described by a 2D lattice gas, taking into account the interaction between oil and surfactant molecules. The model provides quantitative agreement with the observed wetting transitions and the variation in composition of the wetting film with bulk surfactant concentration. The behavior of oil drops on large reservoirs of dilute surfactant is discussed.     

Effect of terbium(III) chloride on the micellization properties of sodium decyl- and dodecyl-sulfate solutions

The effect of TbCl3 on the aggregation processes of the anionic surfactants sodium decyl sulfate (SDeS) and sodium dodecyl sulfate (SDS) has been investigated. Electrical conductivity data, combined with Tb(III) luminescence measurements suggest that the formation of micelles involving TbCl3 and SDS occurs at concentrations below the critical micelle concentration (cmc) of the pure surfactants; the formation of these mixed aggregates was also monitored by light scattering, which indicates that the addition of TbCl3 to surfactant concentration at values below the pure surfactant cmc results in a much greater light scattering than that found with pure sodium alkylsulfate surfactant micelles. This phenomenon is dependent upon the alkyl chain length of the surfactant. With Tb(III)/DS-, complexes are formed with a cation/anion binding ratio varying from 3 to 6, which depends upon the initial concentration of Tb(III). This suggests that the majority of the cation hydration water molecules can be exchanged by the anionic surfactant. When the carbon chain length decreases, interactions between surfactant and Tb(III) also decrease, alterations in conductivity and fluorescence data are not so significant and, consequently, no binding ratio can be detected even if existing. The surfactant micellization is dependent on the presence of electrolyte in solution with apparent cmc being lower than the corresponding cmc value of pure SDS.     

Effects of emulsifier charge and concentration on pancreatic lipolysis. 1. In the absence of bile salts

An in vitro study is performed with sunflower oil-in-water emulsions to clarify the effects of type of used emulsifier, its concentration, and reaction time on the degree of oil lipolysis, α. Anionic, nonionic, and cationic surfactants are studied as emulsifiers. For all systems, three regions are observed when surfactant concentration is scaled with the critical micelle concentration, C(S)/cmc: (1) At C(S) < cmc, α ≈ 0.5 after 30 min and increases up to 0.9 after 4 h. (2) At C(S) ≈ 3 × cmc, α ≈ 0.15 after 30 min and increases steeply up to 0.9 after 2 h for the cationic and nonionic surfactants, whereas it remains around 0.2 for the anionic surfactants. (3) At C(S) above certain threshold value, α = 0 for all studied surfactants, for reaction time up to 8 h. Additional experiments show that the lipase hydrolyzes molecularly soluble substrate (tributirin) at C(S) > cmc, which is a proof that these surfactants do not denature or block the enzyme active center. Thus, we conclude that the mechanism of enzyme inhibition by these surfactants is the formation of a dense adsorption layer on an oil drop surface, which displaces the lipase from direct contact with the triglycerides.