蒙脱士负载钯催化芳基溴化物脱溴性能研究

芳基溴化物催化脱溴 ,无论在有机合成 ,还是消除芳基溴化物对环境的污染方面均具有重要意义 .催化脱卤已有许多研究报道 [1] .常用的负载催化剂为 Pd/C[2 ] ,这种催化剂催化活性较高 ,但对不同卤素的选择性较差 ,贵金属钯损失较大 .用功能化的蒙脱土负载钯催化剂 [3 ]催化芳基溴化物的脱溴 ,有较好的脱溴性能 ,但脱溴时间较长 ,且催化剂制备困难 .我们用胺为吸附质 ,将钯负载在廉价的蒙脱土上制成蒙脱土负载钯催化剂 ,并将其用于催化有机卤化物脱卤 .结果表明 ,该负载钯催化剂对芳基溴化物脱溴具有显著的催化活性和选择性 ,且催化剂易于制…     

有机高分子负载的Sonogashira反应的研究进展

综述了有机高分子负载钯催化剂或反应底物的Sonogashira反应的研究进展;天然高分子壳聚糖负载钯(CS-Pd)作为非均相催化剂,表现出较高的催化活性,可以实现无碱水相反应,正被人们广泛关注.     

准均相的铂钯合金纳米催化剂用于芳香族化合物脱卤反应

用一锅法合成的负载于聚酰胺酸盐上的铂钯纳米催化剂,可以通过调节溶液的p H值实现催化剂与反应体系的有效分离和循环利用.准均相的铂钯催化剂应用于水相中卤代芳香族化合物的氢化脱卤反应,转化率达到99%以上,并且在重复使用5次后仍然保持很高的活性.铂钯双金属催化剂拥有比单一金属铂或者钯更高的催化活性,这主要是由于铂钯合金在催化反应时具有协同效应.利用X射线衍射仪(XRD),透射电子显微镜(TEM)等方法对催化剂进行了表征.数据表明铂钯纳米粒子负载于聚酰胺酸上以后可以在水溶液中稳定存在并且处于均匀的分布状态,纳米粒子尺寸约为4 nm.     

交联聚4-乙烯基吡啶及其季铵盐负载钯催化剂对丙烯酸甲酯加氢反应的研究

 制备了交联聚4-乙烯基吡啶及碘甲烷,溴乙烷季铵化的聚4-乙烯基吡啶负载钯催化剂,考察了它们催化丙烯酸甲酯加氢反应的性能。对碘甲烷季铵化聚4-乙烯基吡啶负载钯催化剂,其催化加氢活性随载体季铵化程度的增加而减小,并且当载体季铵化程度低于80％时,其催化加氢活性比聚4-乙烯基吡啶负载催化剂高。实验结果表明催化剂制备条件对催化性能有很大影响。     

纳米碳纤维负载钯催化剂在Heck反应中的应用——载体相互作用的影响

使用多元醇还原法制备了均匀分散的钯纳米颗粒.将钯纳米颗粒负载于板式、鱼骨式和管式纳米碳纤维,得到稳定、可重复使用的非均相催化剂.实验结果表明,钯纳米胶粒同载体之间的电位差对钯在载体上的负载量、粒子大小以及Heck反应中钯的溶失量有很大的影响.在制备过程中,增加钯纳米胶粒同纳米碳纤维表面的电位差能够大大降低钯在Heck反应中的流失.催化剂的反应活性随钯粒子的增大而降低.     

PVP-蒙脱土双负载Pd-Sn催化剂催化芳香卤化物水相脱卤

负载型双金属催化剂 ,由于双金属的协同作用 ,使催化活性明显提高 .因而负载型双金属催化剂用于催化有机反应 ,已成为人们研究的热点 .高聚物负载双金属催化剂催化有机卤化物脱卤已有报道[1～ 3] ,但脱卤反应大多在有机相中进行 ,若在水相中 ,催化剂则失去活性[2 ] ,且不易回收和重复使用 .然而有毒的卤化物常存在于化工、印染等工业排放的废水中 ,这些废水流入江、河、湖、海或渗漏在地下 ,造成对水体的严重污染 .为消除废水中有机卤化物对环境的污染 ,我们将 PVP(聚乙烯吡咯烷酮 )负载双金属后再负载到无机载体蒙脱土( Mont K1 0 )上 ,…     

磁性纳米粒子负载钯催化有机合成反应研究进展

磁性纳米粒子负载钯催化的有机合成反应,由于具有催化活性高,催化剂在外加磁场作用下即可快速分离和重复使用等特点,已引起了人们的广泛关注.综述了近年来磁性纳米粒子负载钯催化有机合成反应的研究进展,载体包括Fe3O4纳米粒子、有机小分子修饰的磁性纳米粒子、SiO2包覆的磁性纳米粒子、碳修饰磁性纳米粒子、羟基磷灰石包覆的磁性纳米粒子和有机高分子修饰的磁性纳米粒子等.     

负载(S)-脯氨酸手性固相催化剂制备和在不对称加氢反应中的应用

用亲水性、高比表面积、硅烷化硅小球担载钯,以（Ｓ）－脯氨酸为手性助剂、苯乙酮为反应底物,考察不对称加氢反应和不同有机碱助催化剂的影响。实验表明,当使用三辛胺助催化剂时,（Ｒ）－苯乙醇的对映异构体选择性可达１７．５％。将（Ｓ）－脯氨酸负载于亲水性、高比表面积、硅烷化硅小球担体表面,以Ｐｄ（ＯＡｃ）２为催经剂前体,制备负载型手性固相催化剂,初步考察了（Ｓ）－脯氨酸与中心金属钯的摩尔比、疏水性不同的有机     

高分子载钯催化剂对有机锡烷偶联反应的催化性能及结构表征

制备了几种负载型钯催化剂，用于有机锡烷与有机卤化物的偶联反应中，考察了催化剂的使用寿命及载体对催化剂催化活性的影响，通过XPS、XRD、电镜等技术对催化剂进行了表征。结果表明，催化活性中心的质点钯是金属态钯，即催化剂中的钯可以看成是两配位不饱和的，经过氧化加成、金属转换、还原消除过程完成催化反应。     

螯合树脂负载钯催化剂的合成及研究

聚苯乙烯树脂经8-氨基喹啉处理,再与氯化钯反应制得高分子负载钯铬合物。与不同还原剂(H_2,SnCl_2,NaBH_4,LiAlH_4,CH_3OH-H_2O-OH~-和H_2NNH_2)反应后分别制成高分子负载的铬合钯催化剂、胶态钯催化剂和混合价态钯催化剂。文中比较了它们对己烯-1和1,5,9-环十二碳三烯的催化加氢活性和选择性。实验表明用还原能力适中的还原剂作用制得的混合价态钯催化剂具有很高的催化活性和选择性。同时发现增加钯在载体表面的分散度和降低反应所用溶剂的极性可减少贵金属的流失。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.