Cyclic voltammetry modeling, geometries, and electronic properties for metallofullerene complexes with mu3-eta2:eta2:eta2-C60 bonding mode

Reduction potential (E(red)) values have been calculated and compared with available cyclic voltammetry (CV) data for 10 metallofullerene complexes with the mu(3)-eta(2):eta(2):eta(2)-C(60) (M(3)-C(6)[C(60)]) bonding mode. Consideration of bulk solvent effects is essential for the calculation of the E(red) values. Scaling factors for the electrostatic terms of the solvation energies have been introduced to fully describe the experimental cyclic voltammograms with a small mean deviation of 0.07 V. Multiple electron reductions induce movement of the metal cluster moieties on the C(60) surface, which is accompanied with the changes in some M-C[C(60)] bonds from pi-type to sigma-type mode. However, the changes in M(3)-C(60) distances, as well as the geometric changes of M(3) and C(60), are small for the reductions, which is in harmony with the high chemical and electrochemical stability of the metallofullerenes. Our population analyses reveal that the added electrons are not localized at the C(60) moieties, and electron population in the metal clusters is significant, more than 20% (av. 37%), for all the reductions. Furthermore, we demonstrated that the two close one-electron redox waves in CV diagrams are strongly correlated with significant electron delocalization, about 40-80%, to the metal-cluster moieties in these metallofullerene complexes.     

Poly(trifluoromethyl)fullerene radical anions. An ESR/Vis-NIR Spectroelectrochemical Study of C60F2,4 and C60(CF3)2,10

Cyclic voltammograms are reported for C(60)(CF(3))(n) derivatives for the first time. The compounds studied were 1,9-C(60)(CF(3))(2) and 3 isomers of C(60)(CF(3))(10), including the structurally characterized derivative 1,3,7,10,14,17,23,28,31,40-C(60)(CF(3))(10) (C(60)(CF(3))(10)-3). The compound 1,9-C(60)(CF(3))(2) exhibited 3 reversible reductions; C(60)(CF(3))(10)-3 exhibited 2 reversible reductions; the other 2 isomers of C(60)(CF(3))(10) each exhibited 1 reversible reduction. ESR and near-IR spectroelectrochemical experiments were performed to characterize some of the C(60)(CF(3))(n)(-) and C(60)(CF(3))(n)(2-) species generated by cyclic voltammetry. The ESR spectrum of the C(60)(CF(3))(10)-3(-) radical anion consisted of an envelope of 25 lines centered at g = 2.0032 (the apparent a value is ca. 0.5 G), evidence of coupling between the unpaired electron and a significant number of the CF(3) fluorine atoms. The most significant finding is that this radical anion has a half-life in solution at 25 degrees C of about 7 min.     

Synthesis and characterization of tetrakis-silylated C60 isomers

A photochemical reaction of C(60) with disilane in a 2:3 ratio affords the isomer mixture of the tetrakis-adduct of C(60)((t)BuPh(2)Si)(4) as the major product. The use of a three-stage HPLC separation system isolated three of their isomers. Their structural assignments were based on FAB mass, UV-vis, NMR, and cyclic voltammetry (CV) measurements. The CV analysis showed that the terakis-adduct has lower oxidation and higher reduction potentials than the bis-adduct C(60)((t)BuPh(2)Si)(2) and the parent C(60).     

Mechanisms of electrochemically-induced retro-cyclopropanation reactions of fullerene derivatives using digital simulations

Three C(60) derivatives, 1, 2 and 3, have been studied by cyclic voltammetry (CV) under high vacuum in anhydrous tetrahydrofuran (THF). The CV behavior was essentially similar to that already observed for other cyclopropanated fullerene derivatives. After the second reduction processes all compounds undergo a chemical reaction that generates another electroactive species. This "new" chemical species is likely to be the compound with the cyclopropane ring open. Differences in CV behavior were observed for the different addends. Electrochemical data obtained at different scan rates for a given potential window, were fit with the BAS digital simulation program, DigiSim. The purpose of this study was to probe the proposed mechanisms and to obtain reliable estimations of the kinetic constants for the homogeneous chemical reactions taking place during the CV experiments. Calculations at the PM3 level lend additional support to the conclusions derived from digital simulations. The proposed mechanism is similar for all the compounds and involves two main chemical reactions in a reversible square scheme.     

Strong interfullerene electronic communication in a bisfullerene-hexarhodium sandwich complex

Reaction of Rh(6)(CO)(12)(dppm)(2) (dppm = 1,2-bis(diphenylphosphino)methane) with 1.4 equiv. of C(60) in chlorobenzene at 120 degrees C affords a face-capping C(60) derivative Rh(6)(CO)(9)(dppm)(2)(micro(3)-eta(2),eta(2),eta(2)-C(60)) (1) in 73% yield. Treatment of 1 with excess CNR (10 equiv., R = CH(2)C(6)H(5)) at 80 degrees C provides a bisbenzylisocyanide-substituted compound Rh(6)(CO)(7)(dppm)(2)(CNR)(2)(micro(3)-eta(2),eta(2),eta(2)-C(60)) (2) in 59% yield. Reaction of 1 with excess C(60) (4 equiv.) in refluxing chlorobenzene followed by treatment with 1 equiv. of CNR at room temperature gives a bisfullerene sandwich complex Rh(6)(CO)(5)(dppm)(2)(CNR)(micro(3)-eta(2),eta(2),eta(2)-C(60))(2) (3) in 31% yield. Compounds 1, 2, and 3 have been characterized by spectroscopic and microanalytical methods as well as by X-ray crystallographic studies. Electrochemical properties of 1, 2, and 3 have been examined by cyclic voltammetry. The cyclic voltammograms (CVs) of 1 and 2 show two reversible one-electron redox waves, a reversible one-step two-electron redox wave, and a reversible one-electron redox wave, respectively, within the solvent cutoff window. This observation suggests that compounds 1 and 2 undergo similar C(60)-localized electrochemical pathways up to 1(5)(-) and 2(5)(-). Each redox wave of 2 appears at more negative potentials compared to that of 1 because of the donor effect of the benzylisocyanide ligand. The CV of compound 3 reveals six reversible well-separated redox waves due to strong interfullerene electronic communication via the Rh(6) metal cluster bridge. The electrochemical properties of 1, 2, and 3 have been rationalized by molecular orbital calculations using the density functional theory (DFT) method. In particular, the molecular orbital (MO) calculation reveals significant contribution of the metal cluster center to the unoccupied molecular orbitals in 3, which is consistent with the experimental result of strong interfullerene electronic communication via the Rh(6) metal cluster spacer.     

Intramolecular charge-transfer interaction in a new dyad based on C(60) and bis(4'-tert-butylbiphenyl-4-yl)aniline (BBA) donor

A novel dyad 2 based on C(60) and bis(4'-tert-butylbiphenyl-4-yl)aniline (BBA) donor has been synthesized and characterized. Cyclic voltammetry (CV) and UV-vis spectra of 2, 61-phenyl-1, 2-methanofullerene[60] 4, 1,2-methanofullerene[60] 5, and BBA were measured and analyzed. CV measurements showed that a reversible oxidation wave of 2 was positively shifted by 40 mV compared to that of BBA. More remarkably, comparing UV-vis spectra of 2 and 5 shows the big hyperchromic effect of 2 on a broad band at 500 nm despite lacking of more than 400 nm of absorbance for BBA. These results indicate obvious evidence of intramolecular charge-transfer interactions between C(60)-moiety and BBA.     

Reversible sequence of intramolecular associative and dissociative electron-transfer reactions in hydrotris(pyrazolylborate) complexes of rhodium

The one-electron chemically reversible oxidation of four neutral [RhLL'(kappa(2)-Tp(Me2))]complexes [Tp(Me2) = hydrotris(3,5-dimethylpyrazolyl)borate], which leads to kappa(3)-Tp(Me2) bonding in the corresponding monocations, has been studied by cyclic voltammetry (CV) and other electrochemical methods. The CV behavior of [Rh(CO)[P(OPh)(3)]Tp(Me2)] (1) and [Rh(CO)(PPh(3))Tp(Me2)] (2) is quasi-nernstian at slow CV scan rates, with heterogeneous charge-transfer rates, k(s), of 0.025 cm s(-1) and 0.015 cm s(-1) (at 273 K), respectively. By contrast, [Rh(CO)(PCy(3))Tp(Me2)] (3, Cy = cyclohexyl) and [Rh(PPh(3))(2)Tp(Me2)] (4) display electrochemically irreversible CV curves that arise from rate-limiting slow electron-transfer reactions. Both the oxidation of 3 (or 4) and the rereduction of 3(+) (or 4(+)) have two-step (EC-type) mechanisms in which the electron transfer (e.t.) process is followed by a separate structural change, leading to an overall square scheme with irreversible charge-transfer kinetics. Homogeneous redox catalysis was used to determine the E(1/2) value of the oxidation of 3 to an intermediate 3C(+) which is postulated to have a pseudo-square pyramidal structure. Digital simulations gave k(s) = 9 x 10(-3) cm s(-1) for the heterogeneous charge-transfer rate of 3/3C(+). The close-to-nernstian CV behavior of 1 is ascribed to the fact that, unlike the sterically constrained derivatives 3 and 4, the third pyrazolyl ring in 1 is already in a configuration which favors formation of the Rh-N(2) bond in 1(+). The overall redox mechanism for this series of compounds involves an associative oxidative e.t. reaction followed by a dissociative reductive e.t. process.     

Synthesis and properties of new aromatic polyamides with redox‐active 2,4‐dimethoxytriphenylamine moieties

A new triphenylamine‐based diamine monomer, 4,4′‐diamino‐2″,4″‐dimethoxytriphenylamine ( 2 ), was synthesized from readily available reagents and was reacted with various aromatic dicarboxylic acids to produce a series of aromatic polyamides ( 4a–h ) containing the redox‐active 2,4‐dimethoxy‐substituted triphenylamine (dimethoxyTPA) unit. All the resulting polyamides were readily soluble in polar organic solvents and could be solution cast into tough and flexible films. These polymers exhibited good thermal stability with glass transition temperatures of 243–289 °C and softening temperatures of 238–280 °C, 10% weight loss temperatures in excess of 470 °C in nitrogen, and char yields higher than 60% at 800 °C in nitrogen. The redox behaviors of the polymers were examined using cyclic voltammetry (CV). All these polyamides showed two reversible oxidation processes in the first CV scan. The polymers also displayed low ionization potentials as a result of their dimethoxyTPA moieties. In addition, the polymers displayed excellent stability of electrochromic characteristics with coloration change from a colorless neutral state to green and blue‐purple oxidized states. These anodically coloring polyamides showed high green coloration efficiency (CE = 329 cm²/C), high contrast of optical transmittance change (ΔT% = 84% at 829 nm), and long‐term redox reversibility. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3392–3401, 2010     

Electrochemical charging of a fullerene-functionalized self-assembled monolayer on au(111)

A fullerene derivative 10 with a terminal thiol group dissolves easily in common organic solvents and forms a densely packed self-assembled monolayer on gold surfaces. The functionalization of C(60) is based on the 1,3-dipolar cycloaddition of the azomethine ylide generated in situ from the corresponding aldehyde and N-methylglycine. The monolayers were characterized by grazing angle reflectance FTIR spectroscopy, scan tunneling microscopy, and cyclic voltammetry. The cyclic voltammogram of a SAM of 10 showed two well-resolved reversible cathodic waves corresponding to the first two one-electron reductions of the fullerene fragment.     

Facile synthesis of multifullerene-OPE hybrids via in situ ethynylation

[reaction: see text] A series of fullerene-terminated oligo(phenylene ethynylene)s (OPEs) (1a-d and 2) have been synthesized and further characterized by cyclic voltammetry (CV) and UV-vis spectroscopy. The key step in the syntheses is an effective one-pot reaction that allows the attachment of C(60) to multiple terminal alkynes.     

Synthesis, spectroscopic and electrochemical characterization, and DFT study of seventeen C70(CF3)n derivatives (n=2, 4, 6, 8, 10, 12)

Eight new C70(CF3)n derivatives (n=2, 6, 10, 12) have been synthesized and characterized by UV/Vis and 19F NMR spectroscopy, cyclic voltammetry, and quantum chemical calculations at the DFT level of theory. Nine previously known derivatives of C70(CF3)n with n=2-12 were also studied by cyclic voltammetry (and seven of them by UV/Vis spectroscopy for the first time). Most of the 17 compounds exhibited two or three reversible reductions at scan rates from 20 mV s(-1) up to 5.0 V s(-1). In general, reduction potentials for the 0/- couple are shifted anodically relative to the C70 0/-) couple. However, the 0/- E1/2 values for a given composition are strongly dependent on the addition pattern of the CF3 groups. The data show that the addition pattern is as important, if not more important in some cases, than the number of substituents, n, in determining E1/2 values. An analysis of the DFT-predicted LUMOs indicates that addition patterns that have non-terminal double bonds in pentagons result in derivatives that are strong electron acceptors.     

Effect of synthesis temperature,time, and carbon content on the properties and lithium-ion diffusion of LiFePO4/C composites

LiFePO₄/C cathode materials were synthesized by hydrothermal process and subsequently annealed process. The influence of the processing parameters on the structure properties including crystallite size, lattice parameters, and (020) crystallographic direction of the samples prepared at different conditions were investigated by X-ray powder diffraction (XRD). In order to determine the influence of vacancies and inter-site Fe mixing on the lithium diffusion coefficients, the subsequent electrochemical impedance spectra (EIS) measurements and cyclic voltammogram (CV) measurements were carried out. We believe that the sample prepared at optimized conditions of synthesis temperature at 180 °C for 3 h and subsequently calcined at 750 °C for 60 min with the mass ratio (LiFePO₄ precursor to glucose) of 1:0.1 had higher purity, higher crystallinity, some preferred crystal orientation with a (020) texture, and higher lithium diffusion coefficients, moreover, exhibits excellent rate performance and cycling stability at room temperature.     

Reduction-induced switching of single-molecule conductance of fullerene derivatives

The effect of electrochemical reduction on the single-molecule conductance of fullerene C60 derivatives was studied by scanning tunneling microscopy. Three types of C60 derivatives were synthesized, a monoadduct having an amino-terminated linker and two bisadducts having two linkers at different positions (trans2 and trans3). Each C60 derivative was immobilized on a gold surface by an amino-gold linkage, confirmed by infrared reflection-absorption spectroscopy. The immobilized C60 derivatives showed reversible and multiple reduction peaks in the cyclic voltammogram in dimethylformamide (DMF) at almost the same potentials as those in solution, showing the redox properties of the molecules are intact on gold. Single-molecule conductances of the bisadducts, which can span between a scanning tunneling microscopy (STM) tip made of gold and substrate with the two linkers, were determined by the STM break-junction measurements in water and DMF. The conductances were 6.1+/-4.5 nS in water and 4.9+/-1.7 nS in DMF for the trans2 bisadduct and 8.4+/-3.4 nS in water and 7.9 nS+/-2.8 in DMF for the trans3 bisadduct. By using a potential-controlled STM setup, the tunneling current through a single molecule was recorded with sweeping the potentials of the tip and substrate. The trans2 bisadduct showed significant changes in the current when the reductions of the C60 moiety occur. Some current curves showed multiple peaks, and the other curves showed stepwise increase and decrease at the C60 reduction and subsequent reoxidation. Statistical analysis afforded stepwise switching of the conductance as the average behavior and suggested that the electron tunneling through the C60 derivative is enhanced as it accepts electrons.     

Multielectron redox chemistry of a neutral, NIR-active, indigo-pillared Re(I)-based triangular metalloprism

Self-assembled, hexarhenium(I), triangular metalloprism compound [{(CO)(3)Re(μ-2)Re(CO)(3)}(3)(μ(3)-1)(2)] (3) featuring three bis-chelating pillarlike indigo dianions (μ-2), each of which connects two fac-Re(CO)(3) cores, which are interconnected by a tritopic N donor, that is, a 2,4,6-tris(4-pyridyl)-1,3,5-triazine (μ(3)-1, tPyTz) ligand, has been synthesized in high yield and characterized. Metalloprism 3 exhibits a strong absorption in the near-infrared (NIR) region. The reversible, multielectron redox properties of the electrogenerated 3(n) species, where n=3+, 0, 3-, 4-, 5-, 8-, in the visible and especially in the NIR region were investigated in THF solution by cyclic voltammetry (CV), chronocoulometry, EPR spectroscopy, and thin-layer UV/Vis/NIR spectroelectrochemistry (SEC). Stepwise, site-specific electrochemical reductions lead to the formation of a series of highly stable ion (radical) species in which electrons associated with μ-2 or μ(3)-1 components of the molecule can be clearly distinguished. An EPR investigation revealed interaction of unpaired electrons with the metal nuclei ((185,187)Re, I=5/2) in the reduced intermediates. The framework has C(2) symmetry, and accidental degeneracies suffice. Detailed theoretical calculations by structure-based DFT confirm that the triply degenerate HOMO has ≥70% indigo character with a sizable dπ-Re character, while the LUMO is dominated by the triply degenerate indigo ligands, and the LUMO+1 by doubly degenerate tPyTz ligands. A comparison of 3 and previously reported 2,2'-bis-benzimidazolate- (BiBzlm) or alkoxy-pillared Re(I) metalloprisms indicates a very low switching potential with a potential window of less than 1?V and reversibly accessible optical properties with higher stability of the intermediates. The properties exhibited by 3 appear to be due to the slight tuning of the bridging ligand from N,N(-) to N,O(-).     

Synthesis and performance of Li_4Ti_5O_(12) anode materials using the PVP-assisted combustion method

Li_4Ti_5O_(12) was synthesized by a facile gel-combustion method(GCM) with polyvinylpyrrolidone(PVP) as the polymer chelating agent and fuel.The structural and electrochemical properties of the sample were compared with the one prepared by the conventional solid-state reaction(SSR) through X-ray diffraction(XRD),scanning electron microscopy(SEM),cyclic voltammetry(CV),charge-discharge measurements,and electrochemical impedance spectroscopy(EIS),respectively.The sub-microscale Li_4Ti_5O_(12) oxides,with a high phase purity and good stoichiometry,can be obtained by annealing at 800 C.The grain size is smaller than that of the samples that were power prepared by SSR.Lithium-ion batteries with a GCM Li_4Ti_5O_(12) anode exhibit excellent reversible capacities of 167.6,160.7,152.9,and 144.2 mAh/g,at the current densities of 0.5 C,1 C,3 C and 5 C,respectively.The excellent cycling and rate performance can be attributed to the smaller particle size,lower charge-transfer resistance and larger lithium ion diffusion coefficient.It is therefore concluded that GCM Li_4Ti_5O_(12) is a promising candidate for applications in highrate lithium ion batteries.     

Synthesis of d- and l-2,3-trans-3,4-cis-4,5-trans-3,4-dihydroxy-5-hydroxymethylproline and tripeptides containing them

Enantiomerically pure (-)-(1R,4R,5R,6S)- and (+)-(1S,4S,5S,6R)-7-(tert-butoxycarbonyl)-5,6-exo-isopropylidenedioxy-7-azabicyclo[2.2.1]hept-2-one ((-)-3 and (+)-3) have been obtained from the Diels-Alder adduct of N-(tert-butoxycarbonyl)pyrrole and 2-bromo-1-(p-toluenesulfonyl)acetylene, including the Alexakis optical resolution of ketone (+/-)-3 via formation of cyclic aminals with (1R,2R)-diphenylethylenediamine. Compounds (-)-3 and (+)-3 were converted into d- and l-2,3-trans-3,4-cis-4,5-trans-N-(tert-butoxycarbonyl)-5-hydroxymethyl-3,4-isopropylidenedioxyprolines (-)-4 and (+)-4, respectively. Applying the Boc and Fmoc strategies of peptide synthesis, these compounds were used to construct two tripeptides containing the d- or l-2,3-trans-3,4-cis-4,5-trans-3,4-dihydroxy-5-hydroxymethylproline.     

Assemblies of redox-active metallodendrimers using hydrogen bonding for the electrochemical recognition of the H2PO4- and adenosine-triphosphate (ATP2-) anions

Two families of five metallodendrimers have been assembled by hydrogen bonding between the primary amino groups of DSM dendrimers G(n)-DAB-dendr-(NH(2))x (n = 1-5; x = 4, 8, 16, 32, 64) and the OH group of phenol dendrons containing a triallyl or a triferrocenylalkyl tripod in para position. These H-bonded dendrimers noted G(1)-DAB-12Fc, G(2)-DAB-24Fc, G(3)-DAB-48Fc, G(4)-DAB-96Fc, and G(5)-DAB-192Fc have been characterized as resulting from fast, reversible hydrogen bonding by the single broad signal observed in (1)H NMR for the three NH(2) + OH protons whose location depends on the concentration. The cyclic voltammograms (CVs) show a single reversible ferrocenyl wave due to the equivalence of these groups and the fast rotation of the supramolecular ensemble compared to the CV time scale. A new CV wave appears at less anodic potential upon addition of H(2)PO(4)(-) or adenosine-triphosphate (ATP(2)(-)) anion as a tetrabutylammonium salt as with previously studied ferrocenyl dendrimers. In addition, other specific and remarkable features are the fact that the new CV wave is much less intense than the initial one and the dramatically sudden disappearance of the initial CV wave at the equivalent point indicating the formation of a large supramolecular assembly with the hydrogenophosphate groups. Finally, the variation of the number of equivalent anions with the generation number to reach the equivalent point also suggests that the competition between the amino- and amido group for the interaction with hydrogenophosphate depends on the generation number. Recognition by these supramolecular dendrimers of H(2)PO(4)(-) and ATP(2)(-) follows the model of the relatively strong-interaction type in the Kaifer-Echegoyen model, which allows access to the ratio of association constants K(+)/K(0). A positive dendritic effect is found for the recognition of H(2)PO(4)(-) (i.e., the difference of potentials DeltaE(1/2) between the initial CV wave and the new one and the K(+)/K(0) value increase as the generation number increases) whereas the dendritic effect is slightly negative for the recognition of ATP(2)(-).     

Electroanalysis of Gallic and Ellagic Acids at a Boron‐doped Diamond Electrode Coupled with High‐performance Liquid Chromatography

Electrochemistry of gallic acid (GA) and ellagic acid (EA) was investigated by cyclic voltammetry (CV) using a bare boron‐doped diamond (BDD) electrode. CVs indicate that the electro‐oxidation of both GA and EA are quasi‐reversible processes. High‐performance liquid chromatography (HPLC) coupled with a BDD electrode poised at+1.4 V offers the limit of detection (LOD, S/N=3) of 60 and 200 nM for GA and EA, respectively. The optimized method was then applied to the detection of both acids in Islay, Highland and Scotch whiskeys, with the highest concentrations found in a 14‐year‐old Highland whiskey.     

直接乙醇燃料电池PtSn/C电催化剂的合成表征和性能

采用多元醇法制备了n(Pt)/n(Sn)比为2:1,3:1,4:1的PtSn/C电催化剂.通过XRD,TEM、循环伏安和氢化学吸附技术对催化剂进行了表征.TEM和XRD结果表明,不同比例的PtSn/C金属粒子的平均粒径均小于4nm,且粒径分布较窄;该系列催化剂中Pt具有fcc结构;PtSn间的相互作用使Pt晶格参数增大.循环伏安和氢化学吸附实验结果表明,加入Sn可抑制Pt对氢的吸附,Pt3Sn/C对乙醇的氧化电流比Pt4Sn/C高约1倍.用不同n(Pt)/n(Sn)比的催化剂作为直接醇类燃料电池阳极电催化剂,在相同条件下,随着Sn含量的增加,单电池最大输出功率逐渐增大,当Sn含量继续增大时,单池性能反而下降.导致不同比例PtSn催化剂活性差别的原因可能是由于Sn与Pt间的合金化程度不同和催化剂粒子尺寸效应及Sn含量对电池阻抗等几方面因素所致.对40h寿命测试前后的阳极Pt3Sn/C催化剂的分析(EnergydispersiveX-rayanalysis,EDX)结果表明,PtSn含量在测试前后均有所降低,PtSn催化剂的寿命尚有待改善.     

Efficient Synthesis,Structure, and Complexation Studies of Electron‐Donating Thiacalix[n]dithienothiophene

A series of thiacalix[n]dithiothiophenes (n=4–10) was prepared by a facile method and X‐ray analysis was used to determine the molecular structures of square‐ (4‐mer) and pentagonal‐shaped macrocycles (5‐mer). In the cyclic voltammograms, reversible multielectron redox processes, which are due to electronic delocalization, were observed at low oxidation potentials. The cyclic 4‐mer acted as a “Janus‐head” cavitand for two C₆₀ molecules, whereas the 5‐ and 6‐mer formed stable 1:1 complexes with C₆₀ .