Protic ionic liquid-based gel polymer electrolyte: structural and ion transport studies and its application in proton battery

Proton-conducting free standing gel polymer electrolyte (GPE) films containing protic ionic liquid, 1-butyl-3-methylimidazolium hydrogen sulphate, immobilized in blend of poly(vinylidenefluoride-co-hexafluoropropylene) and poly(vinylpyrrolidone) have been prepared by solution-cast technique. Films have been characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscope (SEM), differential scanning calorimetry (DSC), complex impedance spectroscopy, and cyclic voltammetry. Ionic conductivity of the semicrystalline and porous GPE films has been obtained as ~3.9?×?10^?3 S cm^?1 at room temperature. Protonic nature of conduction in the films has been established by performing cyclic voltammetry and complex impedance spectroscopy on the cells having both blocking (stainless steel) and both reversible electrodes (Zn + ZnSO₄.7H₂O). The electrochemical stability window of the films has been found as ~3.8 V. The highest conducting film has been used as a separator and proton conductor to fabricate a proton battery of configuration Zn + ZnSO₄.7H₂O |GPE film| PbO₂ + V₂O₅. The battery shows an open circuit voltage of ~1.62 V. Energy density of the cell has been obtained as 35.2 W h kg^?1 for low current drain. Rechargeability of the cell has been tested for ten cycles. The maximum discharge capacity of the cell has been obtained as ~2.50 mA h g^?1 during the first discharge cycle.     

Effect of plasticizers (EC or PC) on the ionic conductivity and thermal properties of the (PEO)9LiTf: Al2O3 nanocomposite polymer electrolyte system

A new plasticized nanocomposite polymer electrolyte based on poly (ethylene oxide) (PEO)-LiTf dispersed with ceramic filler (Al₂O₃) and plasticized with propylene carbonate (PC), ethylene carbonate (EC), and a mixture of EC and PC (EC+PC) have been studied for their ionic conductivity and thermal properties. The incorporation of plasticizers alone will yield polymer electrolytes with enhanced conductivity but with poor mechanical properties. However, mechanical properties can be improved by incorporating ceramic fillers to the plasticized system. Nanocomposite solid polymer electrolyte films (200–600 μm) were prepared by common solvent-casting method. In present work, we have shown the ionic conductivity can be substantially enhanced by using the combined effect of the plasticizers as well as the inert filler. It was revealed that the incorporating 15 wt.% Al₂O₃ filler in to PEO: LiTf polymer electrolyte significantly enhanced the ionic conductivity [σ _RT (max)?=?7.8?×?10^?6 S cm^?1]. It was interesting to observe that the addition of PC, EC, and mixture of EC and PC to the PEO: LiTf: 15 wt.% Al₂O₃ CPE showed further conductivity enhancement. The conductivity enhancement with EC is higher than PC. However, mixture of plasticizer (EC+PC) showed maximum conductivity enhancement in the temperature range interest, giving the value [σ _RT (max)?=?1.2?×?10^?4 S cm^?1]. It is suggested that the addition of PC, EC, or a mixture of EC and PC leads to a lowering of glass transition temperature and increasing the amorphous phase of PEO and the fraction of PEO-Li⁺ complex, corresponding to conductivity enhancement. Al₂O₃ filler would contribute to conductivity enhancement by transient hydrogen bonding of migrating ionic species with O–OH groups at the filler grain surface. The differential scanning calorimetry thermograms points towards the decrease of T _g , crystallite melting temperature, and melting enthalpy of PEO: LiTf: Al₂O₃ CPE after introducing plasticizers. The reduction of crystallinity and the increase in the amorphous phase content of the electrolyte, caused by the filler, also contributes to the observed conductivity enhancement.     

Nanocomposite solid polymeric electrolyte of 49% poly(methyl methacrylate)-grafted natural rubber�Ctitanium dioxide�Clithium tetrafluoroborate (MG49-TiO2-LiBF4)

A nanocomposite polymer electrolyte consisting of 49% poly(methyl methacrylate)-grafted natural rubber (MG49) as a polymer matrix, lithium tetrafluoroborate (LiBF₄) as a dopant salt, and titanium dioxide (TiO₂) as an inert ceramic filler was prepared by solution casting technique. The ceramic filler, TiO₂, was synthesized in situ by a sol?Cgel process. The ionic conductivity was investigated by alternating current impedance spectroscopy. X-ray diffraction (XRD) was used to determine the structure of the electrolyte, and its morphology was examined by scanning electron microscopy (SEM). The highest conductivity, 1.4?×?10^?5 S cm^?1 was obtained at 30 wt.% of LiBF₄ salt addition with 6 wt.% of TiO₂ filler content. Ionic conductivity was found to increase with the increase of salt concentration. The optimum value of conductivity was found at 6 wt.% of TiO₂. The XRD analysis revealed that the crystalline phase of the polymer host slightly decreased with the addition of salt and filler. The SEM analysis showed that the smoother the surface of the electrolyte, the higher its conductivity.     

Nanocomposite blend gel polymer electrolyte for proton battery application

A proton-conducting nanocomposite gel polymer electrolyte (GPE) system, [35{(25 poly(methylmethacrylate) (PMMA) + 75 poly(vinylidenefluoride-co-hexafluoropropylene) (PVdF-HFP))?+?xSiO₂}?+?65{1 M NH₄SCN in ethylene carbonate (EC) + propylene carbonate (PC)}], where x?=?0, 1, 2, 4, 6, 8, 10, and 12, has been reported. The free standing films of the gel electrolyte are obtained by solution cast technique. Films exhibit an amorphous and porous structure as observed from X-ray diffractometry (XRD) and scanning electron microscopy (SEM) studies. Fourier transform infrared spectrophotometry (FTIR) studies indicate ion–filler–polymer interactions in the nanocomposite blend GPE. The room temperature ionic conductivity of the gel electrolyte has been measured with different silica concentrations. The maximum ionic conductivity at room temperature has been observed as 4.3?×?10^?3?S?cm^?1 with 2 wt.% of SiO₂ dispersion. The temperature dependence of ionic conductivity shows a typical Vogel-Tamman-Fulcher (VTF) behavior. The electrochemical potential window of the nanocomposite GPE film has been observed between ?1.6 V and 1.6 V. The optimized composition of the gel electrolyte has been used to fabricate a proton battery with Zn/ZnSO₄·7H₂O anode and PbO₂/V₂O₅ cathode. The open circuit voltage (OCV) of the battery has been obtained as 1.55 V. The highest energy density of the cell has been obtained as 6.11 Wh?kg^?1 for low current drain. The battery shows rechargeability up to 3 cycles and thereafter, its discharge capacity fades away substantially.     

Nanocomposite solid polymeric electrolyte of 49% poly(methyl methacrylate)-grafted natural rubber–titanium dioxide–lithium tetrafluoroborate (MG49-TiO2-LiBF4)

A nanocomposite polymer electrolyte consisting of 49% poly(methyl methacrylate)-grafted natural rubber (MG49) as a polymer matrix, lithium tetrafluoroborate (LiBF₄) as a dopant salt, and titanium dioxide (TiO₂) as an inert ceramic filler was prepared by solution casting technique. The ceramic filler, TiO₂, was synthesized in situ by a sol–gel process. The ionic conductivity was investigated by alternating current impedance spectroscopy. X-ray diffraction (XRD) was used to determine the structure of the electrolyte, and its morphology was examined by scanning electron microscopy (SEM). The highest conductivity, 1.4 × 10⁻⁵ S cm⁻¹ was obtained at 30 wt.% of LiBF₄ salt addition with 6 wt.% of TiO₂ filler content. Ionic conductivity was found to increase with the increase of salt concentration. The optimum value of conductivity was found at 6 wt.% of TiO₂. The XRD analysis revealed that the crystalline phase of the polymer host slightly decreased with the addition of salt and filler. The SEM analysis showed that the smoother the surface of the electrolyte, the higher its conductivity.

     

Interaction of polyoxometalate Mo132 with poly(vinyl alcohol)

Some aspects of the interaction of (NH₄)₄₂[Mo ₇₂ ^VI Mo ₆₀ ^V O₃₇₂(H₃CCOO)₃₀(H₂O)₇₂] · 30H₃CCOONH₄ · 250H₂O (polyoxometalate Mo132) with a water-soluble nonionic polymer (poly(vinyl alcohol) or related poly(vinylpyrrolidone)) were studied in aqueous solutions and in films. A set of methods was used: spectrophotometry, EPR spectroscopy, visual microscopy, X-ray powder diffraction, scanning probe microscopy, and potentiometry. The complex-formation features of the system were revealed. The miscibility of the components and their influence on crystallization phenomena were considered. The effect of UV and X-rays on poly(vinyl alcohol) + polyoxometalate films was studied. Poly(vinyl alcohol) stabilizes the polymer. Mutual radiation and thermal stabilization of the polymer and polyoxometalate was discovered. The utility of ion-sensitive electrodes for Mo132 determination in solution was demonstrated.     

Preparation and characterization of blended solid polymer electrolyte 49% poly(methyl methacrylate)-grafted natural rubber:poly(methyl methacrylate)–lithium tetrafluoroborate

The preparation and characterization of blended solid polymer electrolyte 49% poly(methyl methacrylate)-grafted natural rubber (MG49):poly(methyl methacrylate) (PMMA) (30:70) were carried out. The effect of lithium tetrafluoroborate (LiBF₄) concentration on the chemical interaction, structure, morphology, and room temperature conductivity of the electrolyte were investigated. The electrolyte samples with various weight percentages (wt.%) of LiBF₄ salt were prepared by solution casting technique and characterized by Fourier transform infrared spectroscopy, X-ray diffraction (XRD), scanning electron microscopy (SEM), and electrochemical impedance spectroscopy. Infrared analysis demonstrated that the interaction between lithium ions and oxygen atoms occurred at symmetrical stretching of carbonyl (C=O) (1,735 cm^?1) and asymmetric deformation of (O–CH₃) (1,456 cm^?1) via the formation of coordinate bond on MMA structure in MG49 and PMMA. The reduction of MMA peaks intensity at the diffraction angle, 2θ of 29.5° and 39.5° was due to the increase in weight percent of LiBF₄. The complexation occurred between the salt and polymer host had been confirmed by the XRD analysis. The semi-crystalline phase of polymer host was found to reduce with the increase in salt content and confirmed by XRD analysis. Morphological studies by SEM showed that MG49 blended with PMMA was compatible. The addition of salt into the blend has changed the topological order of the polymer host from dark surface to brighter surface. The SEM analyses supported the enhancement of conductivity with the addition of salt. The conductivity increased drastically from 2.0 to 3.4?×?10^?5 S cm^?1 with the addition of 25 wt.% of salt. The increase in the conductivity was due to the increasing of the number of charge carriers in the electrolyte. The conductivity obeys Arrhenius equation in higher temperature region from 333 to 373 K with the pre-exponential factor σ _o of 1.21?×?10^?7 S cm^?1 and the activation energy E _a of 0.46 eV. The conductivity is not Arrhenian in lower temperature region from 303 to 323 K.     

Investigation of structures of PEO‐MgCl2 based solid polymer electrolytes

The crystallinity of polyelectrolytes has long been known to affect their ionic conductivity, but the effects of water of hydration on polyelectrolyte structure are not commonly studied. Here, polymer complexes consisting of poly(ethylene oxide) (PEO) with magnesium chloride (anhydrous MgCl₂, MgCl₂·4H₂O, and MgCl₂·6H₂O, respectively) have been prepared by a mixed‐solvent method. Fourier transform‐infrared measurements indicate each magnesium chloride salt can coordinate with PEO to form a complex. The structures of (PEO)_xMgCl₂·4H₂O and (PEO)_xMgCl₂·6H₂O complexes are similar, whilst the structure of (PEO)_xMgCl₂ complex is different to both. Wide angle X‐ray diffraction studies indicate in each polymer complex system the crystallization of PEO is depressed by the interaction of magnesium cation with the ether oxygen of PEO. PEO in (PEO)_xMgCl₂ and (PEO)_xMgCl₂·4H₂O are shown to be amorphous, but in (PEO)_xMgCl₂·6H₂O it is crystalline. Polar optical microscopy images indicate in each PEO/magnesium chloride system the crystalline morphology clearly changes with the increase of magnesium salt content. The reason for the formation of the spherulites with special morphology are the strong interaction between magnesium cation and ether oxygen of PEO, and the different evaporation rates of ethanol and chloroform in mixed solvent. A better understanding of the effects of hydration on polyelectrolyte crystallinity can help in improving their use in a variety of applications. © 2013 Wiley Periodicals, Inc. J Polym Sci Part B: Polym. Phys. 2013, 51, 1162–1174     

Thermal and ionic conductivity studies of plasticized PMMA/PVdF blend polymer electrolytes

Poly(methylmethacrylate) (PMMA)/poly(vinylidene fluoride) (PVdF) blend based electrolyte films containing different lithium salt concentrations are prepared using solvent casting technique. The complexation has been confirmed using XRD and FTIR spectral studies. Ionic conductivity and thermal behaviour of PMMA/PVdF complexes were studied with various salt concentrations, temperature and plasticizer content. The network structure of the polymer complexes are also investigated using SEM. The maximum value of conductivity 4.2×10⁻³ S/cm is obtained for the PMMA(7.5)-PVdF(17.5)-LiClO₄(8)-DMP(67) polymer complex at 303 K.     

Synthesis,characterization and properties of polyaniline doped with transition metal substituted silicotungstate

Polyaniline hybrid material doped with transition metal mono-substituted silicotungstate β₂-K₆[SiW₁₁M(H₂O)O₃₉]?·?xH₂O (M?=?Mn²⁺, Co²⁺, Cu²⁺, Fe²⁺) were prepared for the first time. Their scanning electron microscopy (SEM), infrared (IR), UV–Vis, and X-ray diffraction (XRD) patterns confirm the existence of Keggin anions and form the space reticular structure. The material exhibits excellent proton conduction, its proton conductivity is 9?×?10^?2?s?cm^?1 at room temperature (20°C).     

Preparation and characterization of pva based solid polymer electrolytes for electrochemical cell applications

Solid polymer electrolyte films containing poly(vinyl alcohol) (PVA) and magnesium nitrate (Mg(NO3)2) were prepared by solution casting technique and characterized by using XRD, FTIR, DSC and AC impedance spectroscopic analysis. The amorphous nature of the polymer electrolyte films has been confirmed by XRD. The complex formation between PVA and Mg salt has been confirmed by FTIR. The glass transition temperature decreases with increasing the Mg salt concentration. The AC impedance studies are performed to evaluate the ionic conductivity of the polymer electrolyte films in the range of 303 383 K, and the temperature dependence seems to obey the Arrhenius behavior. Transport number measurements show that the charge transport is mainly due to ions. Electrochemical cell of configuration Mg/(PVA + Mg(NO3)2) (70:30)/(I2 + C + electrolyte) has been fabricated. The discharge characteristics of the cell were studied for a constant load of 100 kΩ.     

Polythermal study of electrophysical characteristics of poly(vinyl alcohol) polymer-salt films

Dielectric constant, dielectric loss tangent, and electrical conductivity were studied as functions of temperature for poly(vinyl alcohol) (PVA) films doped with ammonium metavanadate or polyoxometalate Mo132: (NH₄)₄₂[Mo ₇₂ ^VI Mo ₆₀ ^V O₃₇₂(HCOO)₃₀(H₂O)₇₂]30HCOONH₄·250H₂O. The electrophysical characteristics were measured and analyzed as dependent on the concentration and nature of the salt component and ambient humidity. The conductivity of polymer-salt compositions as a function of salt component concentration has a maximum, which is typical of electrolyte solutions. A conductivity mechanism was suggested: electron conductivity due to radical species at relatively low temperatures and proton conductivity at higher temperatures. Inflections on the electrical conductivity versus temperature and other property plots are due to removal of water from the compositions and thermal destruction.     

Co-Crystallization in systems with carnallite-type double salts

The RbCl · MgCl₂ · 6H₂O? NH₄Cl · MgCl₂ · 6H₂O? H₂O and CsCl · MgCl₂ · 6H₂O? NH₄Cl · MgCl₂ · 6H₂O? H₂O systems have been investigated at 50°C. The formation of continuous series of mixed crystals is observed. An almost complete coincidence of the distribution coefficients values of the components between the solid and liquid phases determined experimentally and calculated theoretically using only solubility data for the two double salts has been established. The 2 RbCl · CoCl₂ · 2H₂O? RbCl · MgCl₂ · 6H₂O? H₂O system has been studied at 25°C. It has been established that this system belongs to the simple eutonic type. The two double salts form no mixed crystals between each other. This fact is explained by the different character of the metal-ligand interaction of Mg²⁺ and Co²⁺ ions in aqueous halide systems.     

LITHIUM ION CONDUCTING POLYMER ELECTROLYTES BASED ON ALTERNATING MALEIC ANHYDRIDE COPOLYMER WITH OLIGO-OXYETHYLENE SIDE CHAINS

A comb polymer with oligo-oxyethylene side chains of the type -(CH_2CH_2O)_(12)CH_3was prepared from methyl vinyl ether/maleic anhydride copolymer and poly (ethyleneglycol) methyl ether. The polymer can dissolve LiClO_4 salt to form homogeneous amor-phous polymer electrolyte. The ac ion conduction was measured using the complex impedancemethod, and conductivities were investigated as functions of temperatures and salt con-centration. The complexes were first found to have two classes of glass transition whichincrease with increasing salt content. The optimum conductivity attained at 25℃ is inthe order of 5.50×10~(-6)Scm~(-1). IR spectroscopy was used to study the cation-polymerinteraction.     

Enhanced ionic conductivity in novel nanocomposite gel polymer electrolyte based on intercalation of PMMA into layered LiV3O8

In the present work, a novel polymer electrolyte based on poly(methyl methacrylate) (PMMA)/layered lithium trivanadate (LiV₃O₈) nanocomposite has been investigated. X-ray diffraction (XRD) study shows that d-spacing is increased from 6.3?±?0.1 Å to 12.8?±?0.1 Å upon intercalation of the polymer into the layered LiV₃O₈. Room temperature ionic conductivity of the obtained nanocomposite gel polymer electrolyte is found to be superior to that of conventional PMMA-based gel polymer electrolyte. Enhancement in ionic conductivity of the nanocomposite gel electrolyte is attributed to the formation of a two-dimensional channel as a result of decreased interaction between Li⁺ and V₃O ₈ ^? layers as confirmed by FTIR. SEM results show aggregation of nanocomposite particles resulting from extension of some of the polymer chains from interlayer to the edge providing paths for Li⁺ ion transport. Interfacial stability of nanocomposite gel electrolyte is also found to be better than that of the conventional PMMA-based gel polymer electrolyte.     

多孔氧化铝有序膜的制备研究

本文用阳极氧化法分别在硫酸和草酸电解液中成功制备出高度有序、具有纳米级孔洞的氧化铝有序阵列模板。采用饱和HgCl₂去除Al基体后,得到典型六方形结构的多孔Al₂O₃有序膜。通过改变氧化电压、氧化时间等条件使模板的孔径、孔深可调、膜厚度可控,并系统研究了对模板有序性、孔径、膜厚度等的影响因素,总结出制备Al₂O₃有序膜的最佳工艺。     

Temperature dependence of the conductivity of plasticized poly(vinyl chloride)-low molecular weight liquid 50% epoxidized natural rubber solid polymer electrolyte

Characterizations were carried out to study on a new plasticized solid polymer electrolyte that was composed of blends of poly(vinyl chloride) (PVC), liquid 50% epoxidized natural rubber (LENR50), ethylene carbonate, and polypropylene carbonate. This freestanding solid polymer electrolyte (SPE) was successfully prepared by solution casting technique. Further analysis and characterizations were carried out by using scanning electron microscopy (SEM), X-ray diffraction, differential scanning calorimeter (DSC), Fourier transform infrared (ATR-FTIR), and impedance spectroscopy (EIS). The SEM results show that the morphologies of SPEs are compatible with good homogeneity. No agglomeration was observed. However, upon addition of salt, formation of micropores occurred. It is worth to note that micropores improve the mobility of ions in the SPE system, thus increased the ionic conductivity whereas the crystallinity analysis for SPEs indicates that the LiClO₄ salt is well complexed in the plasticized PVC-LENR50 as no sharp crystallinity peak was observed for 5–15% wt. LiClO₄. This implies that LiClO₄ salt interacts with polymer host as more bonds are form via coordination bonding. In DSC study, it is found that the glass temperature (T _g) increased with the concentration of LiClO₄. The lowest T _g was obtained at 41.6 °C when incorporated with 15% wt. LiClO₄. The features of complexation in the electrolyte matrix were studied using ATR-FTIR at the peaks of C=O, C–O–C, and C–Cl. In EIS analysis, the highest ionic conductivity obtained was 1.20?×?10^?3 S cm^?1 at 15% wt. LiClO₄ at 353 K.     

The effect of Al2O3-coating coverage on the electrochemical properties in LiCoO2 thin films

The electrochemical properties of nanoscale Al₂O₃-coated LiCoO₂ thin films were examined as a function of the coating coverage. Al₂O₃-coated LiCoO₂ films showed enhanced cycle-life performance with increasing degree of coating coverage, which was attributed to the suppression of Co dissolution and F⁻ concentration in the electrolyte. Moreover, an Al₂O₃-coating layer with partial coverage clearly improved the electrochemical properties, even at 60 °C or with a water-contaminated electrolyte. Even though metal-oxide coating on LiCoO₂ has been actively investigated, the mechanisms of nanoscale coating have yet to be clearly identified. In this article, surface analysis suggested that the Al₂O₃-coating layer had transformed to an AlF₃ ∙3H₂O layer during cycling, which inhibited the generation of HF by scavenging H₂O molecules present in the electrolyte.     

Formulation of a holistic model for the kinetics of steady state growth of porous anodic alumina films

A holistic model for the kinetics of steady state growth of porous anodic alumina films in oxalic acid, H₂C₂O₄, solution was developed not necessarily requiring the adoption of any ‘a priori’ mechanism of porous film growth. By this model the effect of anodising conditions on the transport numbers of Al³⁺ cations and O²⁻ anions across the barrier layer was revealed. The cation (anion) transport number decreased (increased) with current density, increased (decreased) with temperature and was unaffected by the concentration of electrolyte or pH. A complementary atomistic-ionic kinetic model was developed that fully justified these results and showed that the activation distances of Al³⁺ and O²⁻ transport are comparable, but the activation energy of Al³⁺ transport is lower mainly due to the much smaller size of Al³⁺. The validity of the model was tested on the basis of SEM observations, while structural features and the rate of pore wall dissolution were determined.     

致密的5%Al3+掺杂的SnP2O7-SnO2复合陶瓷在中温燃料电池中的应用

首先制备了未掺杂和5%(摩尔分数)Al³⁺掺杂SnO₂的多孔性基片, 然后将基片与85%的H₃PO₄在600℃下反应, 分别得到了致密的未掺杂和5%Al³⁺掺杂的SnP₂O₇-SnO₂复合陶瓷样品. 采用X射线衍射(XRD), 扫描电子显微镜(SEM)和X射线能量色散谱(EDS)测试方法对样品进行了表征, 采用电化学阻抗谱法(EIS)测试了样品在中温(100-250℃)下, 湿润空气和湿润氢气气氛中的电导率. 结果表明, 在湿润空气和湿润氢气中, 5%Al³⁺掺杂的SnP₂O₇-SnO₂复合陶瓷样品的电导率均高于未掺杂的SnP₂O₇-SnO₂复合陶瓷样品的电导率, 且该复合陶瓷样品在湿润空气和湿润氢气中250℃下, 电导率分别达到最大值: 4.30×10^-2和6.25×10^-2 S·cm^-1, 高于至今报道的SnP₂O₇-SnO₂基复合陶瓷及SnP₂O₇基陶瓷在类似条件下的电导率. 以5%Al³⁺掺杂的SnP₂O₇-SnO₂复合陶瓷样品(厚度: 1.45 mm)为电解质, 多孔性铂为电极组装成的氢气/空气燃料电池具有良好的中温电池性能, 175、200、250℃的最大输出功率密度分别为52.0、61.9、82.3 mW·cm^-2. 良好的中温电池性能与该复合陶瓷电解质较高的电导率和致密度及该燃料电池较低的界面极化电阻有关.