基于纳米金/壳聚糖/石墨烯的癌胚抗原阻抗型免疫传感器

研究了在PBS缓冲介质中,一种检测癌胚抗原的新型免标记阻抗型免疫传感器的制备及应用,基于石墨烯、纳米金在玻碳电极表面组装制备传感器,通过循环伏安法、交流阻抗法对制备的传感器进行表征。在优化的实验条件下,该免疫传感器的阻抗值随着检测溶液中癌胚抗原(CEA)浓度的增大而增大,并在0.1～85 ng/mL CEA范围内呈线性关系,回归方程为△Ret=1605.55+39.26ρ;检测限为0.04 ng/mL(R=0.9992)。该免疫传感器可用于临床上对CEA的检测。     

Conductive composites based on core–shell polyaniline nanoclay by latex blending

A simple and versatile method for the preparation of conductive composites based on core–shell polyaniline (PANI) one-dimensional nanoclay distributed in poly(ethylene-vinyl acetate) (EVA) latex with high colloidal stability is demonstrated. The morphological and electrical properties of the composites were investigated. The nanostructures were synthesized from PANI-coated sepiolite nanorods via in situ oxidative polymerization after the surface modification of the sepiolite with ammonium and anilinium salts. Two forms of PANI nanoclay, powder and paste, have shown a much different percolation threshold and significantly different morphologies due to their dispersion ability in EVA matrix. At the same PANI content, the conductivity of the blends with paste is much higher than that of blends with powder PANI nanoclay.     

A review on environmental applications of chitosan biopolymeric hydrogel based composites

Abstract

Chitosan (CS) is being used for fabrication of low cost, biocompatible materials that have applicability in fields such as agriculture, biotechnology and environment. In Environmental research, one of the applications of CS based hydrogel composites are in form of biosorbents for eviction of toxic dyes, heavy metals and nutrients from effluent streams. The adsorption potential could be attributed to the reactive functional groups existing on the surface of CS. CS based materials can also be employed for oil/water separation, as a fertilizer carrier, in Microbial fuel cells as Electrolyte membrane and as Electrochemical/Biosensors for detecting and analyzing few environmental pollutants such as pesticides. The earlier review papers on the subject matter have concentrated mainly on dye and heavy metal removal without giving details of its utility in the field of electrochemistry and agriculture. Though the biopolymer holds numerous applications, it has not been discussed extensively. Thus, an attempt has been made to elucidate the current and potential applications of CS hydrogels and composites based on the efficacy it has shown in areas of removal of organic and inorganic contaminants such as dyes, heavy metals and nutrients, in agriculture, oil and water separation, Microbial Fuel cells and Electrochemical/Biosensors.

• HIGHLIGHTS

• Chitosan based hydrogel composites could be extensively used in the field of Environment Technology.

• The composites act as effective biosorbents for dye, heavy metal and nutrient removal because of the functional groups present on Chitosan’s surface.

• These can also be effectively used for oil/water separation and also as a fertilizer/pesticide carrier for their slow release.

• Chitosan based electrolytes can become a promising ecofriendly substitute for synthetic polymers in fuel cells.

• These biopolymers have also been researched upon as electrochemical/biosensors in recent years for detecting environmental pollutants.

     

A DNA biosensor based on graphene paste electrode modified with Prussian blue and chitosan

A chemically modified graphene paste electrode was prepared by incorporating appropriate amounts of graphene in a paste mixture, followed by electrodepositing Prussian blue (PB) and coating chitosan on the electrode surface. The electrode was able to bind ssDNA, and gave a better voltammetric response for complement DNA than did ordinary carbon paste electrodes. The response of the electrode was characterized with respect to the paste composition, immobilization time of probe DNA on the chitosan and PB modified graphene paste electrode, and the effect of 1-ethyl-3-(3-dimethylaminopropyl)-carbodiimide hydrochloride (EDC). The electrochemical behavior of PB assembled on the graphene paste electrode was investigated. The combination of graphene and PB can enhance the current response of the graphene paste electrode. As a consequence of DNA hybridization, a significant change in the current due to daunomycin intercalated with double-stranded DNA (ds-DNA) on the surface of the graphene paste electrode was observed.     

Amperometric sulfite sensor based on multiwalled carbon nanotubes/ferrocene-branched chitosan composites

A novel amperometric sensor for the determination of sulfite was fabricated based on multiwalled carbon nanotubes (MWCNTs)/ferrocene-branched chitosan (CHIT-Fc) composites-covered glassy carbon electrode (GCE). The electrochemical behavior of the sensor was investigated in detail by cyclic voltammetry. The apparent surface electron transfer rate constant (K_s) and charge transfer coefficient (α) of the CHIT-Fc/MWCNTs/GCE were also determined by cyclic voltammetry, which were about 1.93 cm s⁻¹ and 0.42, respectively. The sensor displayed good electrocatalytic activity towards the oxidation of sulfite. The peak potential for the oxidation of sulfite was lowered by at least 330 mV compared with that obtained at CHIT/MWCNTs/GCE. In optimal conditions, linear range spans the concentration of sulfite from 5 μM to 1.5 mM and the detection limit was 2.8 μM at a signal-to-noise ratio of 3. The proposed method was used for the determination of sulfite in boiler water. In addition, the sensor has good stability and reproducibility.     

Ultrasensitive electrochemical immunoassay based on graphene oxide-Ag composites for rapid determination of clenbuterol

We report the development of an ultrasensitive amperometric biosensor based on Ag nanoparticles-decorated graphene oxide nanosheets (GO) (Ag-GO) for the rapid detection of clenbuterol (CLB). The morphology and structure of the Ag-GO labeled CLB (Ag-GO-CLB) were characterized by transmission electron microscope (TEM), atomic force microscope (AFM), and ultraviolet-visible spectroscope (UV-vis). The immunosensor was prepared by covalently immobilizing capture antibodies on a multi-walled carbon nanotubes-modified glassy carbon electrode. Through competitive immunoreactions, the Ag-GO-CLB nanocomposites were captured on the immunosensor and the silver was measured by positive differential pulse voltammetry (DPV) in KCl solution for the detection of antigen. The experimental results show a linear response over the range from 0.01 to 10.0 ng mL(-1) with a lower detection limit of 6.8 pg mL(-1) (signal-to-noise ratio of 3). The Ag-GO based immunosensor offers a simple and convenient route for metal-immunoassay labels, which can avoid the complicated and time-consuming dissolving of metal component for ultrasensitive determination. Moreover, the electrochemical immunoassay shows acceptable specificity and stability and is suitable for the determination of CLB in real samples.     

Photoelectrochemical properties of the composites based on TiO2 nanotubes,CdSe and graphene oxide

Research on Chemical Intermediates - The photoelectrochemical properties of electrodes based on a nanocomposite consisting of TiO2 nanotubes and CdSe films modified with graphene oxide have been...     

Electrochemical study on different layers of graphene based TiO2/graphene composites as an anode for lithium-ion batteries

Research on Chemical Intermediates - In order to explore the influence of the layers of graphene on the lithium-ion battery composites, to increase the electroconductivity of TiO2 and...     

石墨烯基复合材料对污水净化的研究进展*

石墨烯基复合材料具有较大的比表面积、较高的表面能,对污染物具有较强的吸附能力,可用于去除水中的污染物,从而达到净化污水的目的。本文综述了几种石墨烯基复合材料的制备和其对水中化学类物质,如重金属离子、有机染料和其他污染物的吸附特性,并简述了溶液的酸度、接触时间和金属离子初始浓度等对石墨烯基复合材料吸附污染物的影响。     

Combustion behavior and thermal stability of TPU composites based on layered yttrium hydroxides and graphene oxide

Journal of Thermal Analysis and Calorimetry - Layered yttrium hydroxides (LYH)- and graphene oxide (GO)-supported layered yttrium hydroxides (GO–LYH) were synthesized by a co-precipitation...     

A novel nitrite sensor based on graphene/polypyrrole/chitosan nanocomposite modified glassy carbon electrode

A novel nitrite sensor was fabricated based on a graphene/polypyrrole/chitosan nanocomposite film modified glassy carbon electrode. The nanocomposite film was characterized by scanning electron microscopy, Fourier transform infrared spectroscopy and Raman spectroscopy. The electron transfer behaviour of the modified electrodes was investigated in [Fe(CN)(6)](3-)/(4-) redox probe using cyclic voltammetry and electrochemical impedance spectroscopy. Differential pulse voltammetry and amperometry were used to study the electrochemical properties of the proposed sensor. Under optimum conditions, the sensor exhibited good reproducibility and stability for nitrite determination. Linear response was obtained in the range of 0.5-722 μM with a detection limit of 0.1 μM (S/N = 3) for nitrite determination.     

Electrically conductive composites of collagen and graphene

Russian Chemical Bulletin - New composite materials of collagen with electrical conductivity up to 6.1?10–4 S cm–1 were obtained using colloidal dispersions of...     

Preparation and dielectric properties of composites based on PVDF and PVDF-grafted graphene obtained from electrospinning-hot pressing method

In this work, graphene was modified by the grafting of poly(vinylidene fluoride) (PVDF) using Friedel-Crafts reaction to form PVDF-grafted graphene (PGG) filler, which was confirmed by transmission electron microscope, Fourier transform infrared, Raman spectroscopy, wide angle X-ray diffraction, and thermogravimetric analysis. The solution containing as-prepared PVDF-grafted graphene and PVDF was electrospun to form fibrous membranes, which was subjected to hot pressing in the laminating mode to prepare solid PGG/PVDF composite films. The structures of electrospun fibrous membrane and solid PGG/PVDF composite film were investigated by scanning electron microscope. Furthermore, it could be found that the dielectric constants of PGG/PVDF composites exhibiting relatively low dielectric loss factors were significantly higher than that of pure PVDF.     

Glucose biosensor based on immobilization of glucose oxidase in platinum nanoparticles/graphene/chitosan nanocomposite film

The bionanocomposite film consisting of glucose oxidase/Pt/functional graphene sheets/chitosan (GOD/Pt/FGS/chitosan) for glucose sensing is described. With the electrocatalytic synergy of FGS and Pt nanoparticles to hydrogen peroxide, a sensitive biosensor with a detection limit of 0.6 μM glucose was achieved. The biosensor also has good reproducibility, long-term stability and negligible interfering signals from ascorbic acid and uric acid comparing with the response to glucose. The large surface area and good electrical conductivity of graphene suggests that graphene is a potential candidate as a sensor material. The hybrid nanocomposite glucose sensor provides new opportunity for clinical diagnosis and point-of-care applications.     

Conductive and mesoporous single-wall carbon nanohorn/organic aerogel composites

Conductive and mesoporous single-wall carbon nanohorn/resorcinol-formaldehyde aerogel composites were fabricated by embedding organic resorcinol-formaldehyde aerogels with single-wall carbon nanohorns. Samples were characterized with transmission electron microscopy, field emission scanning electron microscopy, nitrogen adsorption at 77 K, and direct-current volume electrical conductivity measurement. It was demonstrated that these composites have important properties, such as controllable nanoporosity and high electrical conductivity in the range of 10-4 S m-1, which enables many potential applications.     

Monolithic polyimine vitrimer/graphene aerogel composites

Graphene-polymer composites have attracted great attention as sensing materials due to their tailorable electrical conductivity, physicochemical properties, and sensitivity to geometric and functional changes. Herein, we report the first example of cylindrical monolithic polyimine vitrimer/graphene composites with excellent mechanical, compressive, rehealable and recyclable, and piezoresistive properties via simple infiltration of polymer monomers into the pores of graphene aerogel followed by thermal curing. The composites exhibit excellent durable compressibility (negligible reduction in the compression properties even after 3000 consecutive compression cycles), rapid recovery to the original size upon stress released, high compressive strength (up to 1.2 MPa), and high conductivity (up to 79 S/m). Excellent piezoresistive properties were observed, displaying consistent and reliable change of the electrical resistance with the compression ratio. Furthermore, rehealing with ～100% recovery of the compressive strength and electric conductivity was achieved under mild rehealing conditions, which is highly desired but has rarely been reported for electronic materials. The facile strategy for fabrication of rehealable monolithic polymer/GAs can open new possibilities for the sustainable development of composites with high electrical conductivity for various applications such as sensing, health monitoring, and movement detection.     

Determination of allura red using composites of water-dispersible reduced graphene oxide-loaded Au nanoparticles based on ionic liquid

A facile route for producing reduced graphene oxide (RGO)-loaded Au nanoparticles based on ionic liquids (IL) has been proposed, in which the as-prepared RGO can be dispersed stably in water. With the assistance of IL, Au nanoparticles were uniformly and densely absorbed on the surfaces of the IL functionalised reduced graphene oxide (IRGO), forming a new composite of IRGO/Au with high dispersibility. This IRGO/Au composite enhanced its electrochemical signal obviously in the measurement of allura red in foods and exhibited a wider linear response ranging from 0.297 (0.0006 μmol L^?1) to 99.3 μg L^?1 (0.2 μmol L^?1) with lower detection limit of 0.213 μg L^?1 (0.00043 μmol L^?1) at a signal-to-noise ratio of 3. To further study the practical applicability of the proposed sensor, the modified electrode was successfully applied to detect allura red in five kinds of common foods and the assay results were in a good agreement with the reference values detected by HPLC.