Facile fabrication of noble metal nanoparticles encapsulated in hollow silica with radially oriented mesopores: multiple roles of the N-lauroylsarcosine sodium surfactant

A facile one-pot method was reported to fabricate noble metal nanoparticles encapsulated in silica hollow nanospheres with radially oriented mesopores, and the anionic amino acid surfactant, N-lauroylsarcosine sodium, played multiple roles: reducing agent, stabilizer, emulsion droplets and mesopore template.     

Self-assembling gold nanoparticles on thiol-functionalized poly(styrene-co-acrylic acid) nanospheres for fabrication of a mediatorless biosensor

A novel strategy to construct a sensitive mediatorless sensor of H₂O₂ was described. At first, a cleaned gold electrode was immersed in thiol-functionalized poly(styrene-co-acrylic acid) (St-co-AA) nanosphere latex prepared by emulsifier-free emulsion polymerization St with AA and function with dithioglycol to assemble the nanospheres, then gold nanoparticles were chemisorbed onto the thiol groups and formed monolayers on the surface of poly(St-co-AA) nanospheres. Finally, horseradish peroxidase (HRP) was immobilized on the surface of the gold nanoparticles. The sensor displayed an excellent electrocatalytical response to reduction of H₂O₂ without the aid of an electron mediator. The biosensor showed a linear range of 8.0 μmol L⁻¹–7.0 mmol L⁻¹ with a detection limit of 4.0 μmol L⁻¹. The biosensor retained more than 97.8% of its original activity after 60 days’ storage. Moreover, the studied biosensor exhibited good current reproducibility and good fabrication reproducibility.     

pH-responsive poly(methacrylic acid)-grafted hollow silica vesicles

Poly(methacrylic acid)-grafted hollow silica vesicles (PMAA-g-hollow silica vesicles) were obtained through a grafting-from approach. PMAA brushes were formed by performing atom-transfer radical polymerisation of sodium methacrylate with an initiator attached to the hollow silica spheres. PMAA-g-hollow silica vesicles were characterised by using TEM, thermogravimetric analysis (TGA) and FTIR spectroscopy. pH-dependent ξ potential and (1)H NMR spectra of PMAA-g-hollow silica vesicles were measured, and the results indicated that MAA brushes in PMAA-g-hollow silica vesicles had a lower ionisation degree and low solubility in acidic aqueous solution, for example, pH 3.4, but a higher ionisation degree and high solubility when the pH was higher than 7. Also it was demonstrated that calcein blue and fluorescein isothiocyanate (FITC) labelled dextran (M(n):10 kDa) could be encapsulated in the interiors of the PMAA-g-hollow silica vesicles with a negligible amount in PMAA brushes at pH 2, and pH-triggered release of calcein blue and FITC-labelled dextran from PMAA-g-hollow silica vesicles was observed at pH 7.4.     

Modification of porous silica particles with poly(acrylic acid)

The surface of porous silica particles was modified with poly(acrylic acid) by reacting the carboxyl groups on poly(acrylic acid) with the amino groups of pregrafted aminopropyltriethoxysilane (APS). The chemical modifications by APS and polymer were characterized by infrared spectroscopy and the amount of APS and poly(acrylic acid) grafted to the surface were determined by thermal gravimetric analyses. The wettability of the modified silica particles, based on the rate of water penetration, was pH‐dependent with PAA; at pH 1.5 the wettability increased but at pH 5.5 it decreased dramatically. The pore size and size distribution of the silica particles decreased with APS and polymer grafting. Copyright © 2000 John Wiley & Sons, Ltd.     

Grafting of functionalized silica particles with poly(acrylic acid)

Two different methods to graft silica particles with poly(acrylic acid) (PAA) were studied. In the first method PAA was reacted with 1,1′‐carbonyldiimidazole to give functionalized PAA. The resulting activated carbonyl group reacted easily with 3‐aminopropyl‐functionalized silica at low temperatures. In the second method 3‐glycidoxypropyl‐functionalized silica particles were reacted directly with PAA by using magnesium chloride as a catalyst. Different molecular weights of PAAs were used in order to investigate the effect of molecular weight on grafting yields in both methods. The grafting yields were determined with thermogravimetric analysis (TGA). All products were also investigated with IR. The results showed that the yields of reactions performed at ambient temperature by using 1,1′‐carbonyldiimidazole‐functionalized PAA were the same as with a direct reaction of unfunctionalized PAA and 3‐aminopropyl‐functionalized silica performed at 153°C. Also in reactions between 3‐glycidoxypropyl‐functionalized silica and PAA the yields were satisfactory. Copyright © 2006 John Wiley & Sons, Ltd.     

Preparation and characterization of poly(acrylic acid)-based nanoparticles

The present investigation describes the synthesis and characterization of nanoparticles based on poly(acrylic acid) (PAA) intramolecularly cross-linked with diamine, 2,2′-(ethylenedioxy)bis(ethylamine), using water-soluble carbodiimide. The aqueous colloid dispersions of nanoparticles were clear or mildly opalescent depending on the ratio of cross-linking, pH of the solution, and the molecular weight of PAA, finding consistent with values of transmittance between 3% and 99%. The structure was determined by nuclear magnetic resonance spectroscopy, and the particle size was identified by dynamic light scattering (DLS) and transmission electron microscopy (TEM) measurements. It was found that particle size depends on the pH, and at a given pH, it was caused by the ratio of cross-linking and the molecular weight of PAA. Particle size measured by TEM varied in the range of 20 and 80 nm. In the swollen state, the average size of the particles measured by DLS was in the range of 35–160 nm.     

Polyelectrolyte complex nanoparticles from chitosan and poly(acrylic acid) and Polystyrene‐block‐poly(acrylic acid)

Interpolymer polyelectrolyte complexes of chitosan (CS) with poly(acrylic acid) homopolymers and polystyrene‐block‐poly(acrylic acid) diblock copolymers were prepared and characterized. The influence of the positive/negative charge balance (charge ratio), pH, and ionic strength were thoroughly studied by dynamic light scattering. The existence of a strong polyelectrolyte effect was also highlighted in this study. Domains of stability, in which nanoparticle sizes are smaller than 100 and 200 nm for complexes of CS with the homopolymer and copolymer, respectively, were identified and confirmed by scanning electron microscopy and atomic force microscopy. The charged nature of the surface of the nanoparticles was evidenced by Zeta potential measurements. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Enhanced properties of poly(lactic acid) with silica nanoparticles

The objective of this article is to fabricate poly(lactic acid) (PLA) and nano silica (SiO₂) composites and investigate effect of SiO₂ on the properties of PLA composites. Surface‐grafting modification was used in this study by grafting 3‐Glycidoxypropyltrimethoxysilane (KH‐560) onto the surface of silica nanoparticles. The surface‐grafting reaction was confirmed by Fourier transform infrared spectroscopy and thermogravimetric analysis. Then the hydrophilic silica nanoparticles became hydrophobic and dispersed homogeneously in PLA matrix. Scanning electron microscope and Dynamic thermomechanical analysis (DMA) results revealed that the compatibility between PLA and SiO₂ was improved. Differential scanning calorimetry and polarized optical microscope tests showed that nano‐silica had a good effect on crystallization of PLA. The transparency analysis showed an increase in transparency of PLA, which had great benefit for the application of PLA. The thermal stability, fire resistance, and mechanical properties were also enhanced because of the addition of nano silica particles. Copyright © 2016 John Wiley & Sons, Ltd.     

Synthesis of novel gelatin/poly(acrylic acid) nanorods via the self-assembly of nanospheres

In this work,gelatin-poly(acrylic acid) (GEL-PAA) nanospheres with diameter of around 35 nm were prepared using a polymermonomer (gelatin-AA) pair reaction system.These nanospheres can self-assemble into nanorods in aqueous solution at 4 °C.Based on the observation that the intermediate state of the formation of the nanorods and the facts that the self-assembly can only occur at relatively low temperature and the gelatin molecules on the outermost layer of the GEL-PAA nanospheres can be renatured to triple ...     

明胶-聚丙烯酸纳米微球的一维自组装制备纳米棒

明胶-聚丙烯酸纳米微球可在4℃下自组装形成纳米棒,所形成的纳米棒结构规整并具有与纳米微球相同的直径.通过观察纳米棒形成的中间状态,发现该纳米棒由明胶-聚丙烯酸纳米微球一维排列而成.由于只有在较低温度下纳米微球才能形成棒状结构,并且圆二色性光谱数据证明明胶-聚丙烯酸纳米微球表面的明胶分子具有在低温下复性成为三螺旋构象的能力,因此可以推断明胶-聚丙烯酸纳米棒是由纳米微球表面的明胶分子通过复性为三螺旋结构所产生的氢键以及静电等力的作用一维自组装而形成的.     

Precipitation-redispersion of cerium oxide nanoparticles with poly(acrylic acid): toward stable dispersions

We exploit a precipitation-redispersion mechanism for complexation of short chain polyelectrolytes with cerium oxide nanoparticles to extend their stability ranges. As synthesized, cerium oxide sols at pH 1.4 consist of monodisperse cationic nanocrystalline particles having a hydrodynamic diameter of 10 nm and a molecular weight of 400 000 g mol(-1). We show that short chain uncharged poly(acrylic acid) at low pH when added to a cerium oxide sols leads to macroscopic precipitation. As the pH is increased, the solution spontaneously redisperses into a clear solution of single particles with an anionic poly(acrylic acid) corona. The structure and dynamics of cerium oxide nanosols and their hybrid polymer-inorganic complexes in solution are investigated by static and dynamic light scattering, X-ray scattering, and chemical analysis. Quantitative analysis of the redispersed sol gives rise to an estimate of 40-50 polymer chains per particle for stable suspension. This amount represents 20% of the mass of the polymer-nanoparticle complexes. This complexation adds utility to the otherwise unstable cerium oxide dispersions by extending the range of stability of the sols in terms of pH, ionic strength, and concentration.     

Pseudotemplate synthesis of copper nanoparticles in solutions of poly(acrylic acid)-pluronic blends

It was found that the reduction of copper(II) ions in solutions of poly(acrylic acid)-pluronic blends results in a stable sol of metallic copper with a particle size below 10 nm, whereas a less stable sol with coarse aggregates of particles is formed in the presence of poly(acrylic acid) alone and an insoluble complex of this polymer with copper nanoparticles is produced in the presence of pluronic alone. The addition of poly(acrylic acid) to the complex causes the transfer of a portion of nanoparticles from the precipitate into the sol. In mixed poly(acrylic acid) and pluronic solutions, no formation of a polymeric complex with reasonable stability was detected. It was assumed that such a polycomplex is stabilized in the presence of copper nanoparticles. Owing to its amphiphilic nature, the complex forms stable protective shields on the surface of nanoparticles, and the stability of the sol is determined by free fragments of poly(acrylic acid).     

Reparation of silica/poly(methacrylic acid)/poly(divinylbenzene-co-methacrylic acid) tri-layer microspheres and the corresponding hollow polymer microspheres with movable silica core

 Hollow poly(divinylbenzene-co-methacrylic acid) (P(DVB-co-MAA)) microspheres were prepared by the selective dissolution of the non-crosslinked poly(methacrylic acid) (PMAA) mid-layer in ethanol from the corresponding silica/PMAA/P(DVB-co-MAA) tri-layer hybrid microspheres, which were afforded by a three-stage reaction. Silica/PMAA core-shell hybrid microspheres were prepared by the second-stage distillation polymerization of methacrylic acid (MAA) via the capture of the oligomers and monomers with the aid of the vinyl groups on the surface of 3-(methacryloxy)propyl trimethoxysilane (MPS)-modified silica core, which was prepared by the Stöber hydrolysis as the first stage reaction. The tri-layer hybrid microspheres were synthesized by the third-stage distillation precipitation copolymerization of functional MAA monomer and divinylbenzene (DVB) crosslinker in presence of silica/PMAA particles as seeds, in which the efficient hydrogen-bonding interaction between the carboxylic acid groups played as a driving force for the construction of monodisperse hybrid microspheres with tri-layer structure. The morphology and the structure of silica core, silica/PMAA core-shell particles, the tri-layer hybrid microspheres and the corresponding hollow polymer microspheres with movable silica cores were characterized by transmission electron microscopy (TEM), Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy (XPS).     

Calorimetric investigation of poly(methacrylic acid) and poly(acrylic acid) in aqueous solution

The enthalpy of dissociation of poly(acrylic acid) and of poly(methacrylic acid) in water and in 0.5N NaCl at 25°C has been measured over a wide range of degrees of neutralization of the polyelectrolytes. In the case of poly(methacrylic acid) the calorimetric data permit the direct evaluation of the enthalpy of conformational transition of the polymer. For this transition, with the aid of standard free energy data derived from potentiometric titrations, the change in entropy was also estimated. The relative accuracy of the thermodynamic data, and the possibility of deriving therefrom information on the mechanism of transitions of the type, globular coils → expanded coils for partially hydrophobic synthetic polyelectrolytes in aqueous solution are discussed.     

Swelling of ferrogels of poly(acrylic acid) with ferric oxide nanoparticles stabilized by chitosan

The processes of swelling of poly(acrylic acid) ferrogels prepared via radical polymerization in an aqueous suspension of ferric oxide nanoparticles with the weighted average size of 23.5 nm obtained by laser evaporation method and stabilized by chitosan (М = 5.3 × 10⁵ and degree of deacetylation of 62%) are studied. The swelling of washed ferrogels depends on the content of chitosan and decreases abruptly at a polymer concentration exceeding 1 g/L. At a chitosan concentration above 1 g/L, the chemical network of poly(acrylic acid) is formed on the fluctuation network of chitosan in solution. As pH increases, these ferrogels are contracted owing to formation of an interpolymer complex of chitosan with poly(acrylic acid) subchains.     

Synthesis of dense poly(acrylic acid) brushes and their interaction with amine-functional silsesquioxane nanoparticles

Poly(acrylic acid) polyelectrolyte brushes were synthesized by surface-initiated atom transfer radical polymerization (SI-ATRP) of tert-butyl acrylate on planar gold surfaces and subsequent hydrolysis. Three types of monolayers with different numbers of thiol binding sites per initiating unit were used. The binding strength to the gold surface turned out to be of crucial importance for the formation of uniform brush layers after acidic hydrolysis. The monolayers and polymer brushes were characterized by ellipsometry, infrared spectroscopy, water contact angle measurements, atomic force microscopy, and X-ray photoelectron spectroscopy. Their interaction with [(diglycidylamino)propyl]silsesquioxane nanoparticles at various pH values was studied by surface plasmon resonance.     

Metallic cation induced one-dimensional assembly of poly(acrylic acid)-1-dodecanethiol-stabilized gold nanoparticles

In this work, we report a simple approach for controllable synthesis of one-dimensional (1D) gold nanoparticle (AuNP) assemblies in solution. In the presence of divalent metallic ions, poly(acrylic acid)-1-dodecanethiol-stabilized AuNPs (PAA-DDT@AuNPs) are found to form 1D assemblies in aqueous solution by an ion-templated chelation process; this causes an easily measurable change in the absorption spectrum of the particles. The assemblies are very stable and remain suspended in solution for more than one month without significant aggregation. The morphologies of these 1D assemblies are dependent on the concentration of metallic cations in the solution. While lower concentrations led to the formation of particle dimers, higher concentrations generated long nanoparticle chain networks. In addition, the effect of EDTA, the solution pH, and the size of the PAA-DDT@AuNPs is also studied for further exploration of the mechanism of the formation of the 1D assemblies.     

Effect of urea on poly(methacrylic acid) and poly(acrylic acid) aqueous solutions

The effects of urea on aqueous solutions of both poly(methacrylic acid (PMA) and poly(acrylic acid) (PAA) have been investigated by using potentiometry, viscometry and study of the fluorescence of Auramine O, a cationic dye. The viscosity behaviour of unionized PMA obtained from direct dissolution of solid powder shows that the unneutralized macromolecules can be associated in water. The stability of such “aggregates” seems weak as indicated by their disappearance as soon as the charge density is very low. For PMA salt solution percolated through a cation (H⁺) exchange resin column, no association is observed. The pH-dependent conformational behaviour of PMA which, contrary to PAA, presents compact conformations in water at low charge density is discussed in terms of solvophobic/solvophilic interactions. It is shown that, even for urea concentration up to 8 M, the compact conformations of PMA are not completely destroyed. The formation of H⁺/urea complex is taken into account.     

Complexation between poly(acrylic acid) and poly(vinylpyrrolidone): Influence of the molecular weight of poly(acrylic acid) and small molecule salt on the complexation

Poly(acrylic acid) (PAA) with different molecular weight and poly(vinylpyrrolidone) (PVP) were prepared by free radical polymerization using 2,2′-azoisobutyronitrile (AIBN) as initiator in anhydrous methanol for PAA, and in distilled water for PVP. Then, the complexation between PAA and PVP in aqueous solution was studied by UV transmittance measurement and fluorescence probe technique. The result shows that (1) at low pH, the formation of complexation between PAA and PVP bases on the intermacromolecular hydrogen bond and the composition of the formed complex is around 3:2 (the unit molar ratio of PAA to PVP) at pH 2.60 over the range of pH investigated. (2) The cooperative interaction through the formation of hydrogen bond among active sites plays an important role in complex formation, and depends on the pH of solution, the required minimum chain length of poly(acrylic acid). (3) The hydrogen bond is not affected by small molecular salt, which only affects those carboxylic groups without forming hydrogen bond on the PAA chain.