Morphology of supported nanoparticles

An short review of the shape of supported nanoparticles is presented. In the first part of this review the basic theoretical concepts governing the shape of crystals are given. The validity of the concepts of equilibrium shape for crystals with nanometer dimensions is discussed as well as the influence of the support. The effect of the growth kinetics on the particle shape is also discussed. In the second part, several examples of metal (Au and Pd) nanoparticles supported on MgO, mica and graphite substrates are given to demonstrate the utility of the main experimental techniques (TEM, STM, AFM, GISAXS) used to observe the morphology of nanocrystals.     

Synthesis and photoluminescence of titania nanoparticle arrays templated by block-copolymer thin films.

High-density arrays of titania nanoparticles were prepared using a polystyrene-b-poly(ethylene oxide) block copolymer (PS-b-PEO) as a template and a titanium tetraisopropoxide based sol-gel precursor as titania source via a spin-coating method. The hydrophilic titania sol-gel precursor was selectively incorporated into hydrophilic PEO domains of PS-b-PEO and form titania nanoparticle arrays, due to a microphase separation between the PS block and the sol-gel/PEO phase. Field emission scanning electron microscopy (FESEM) and scanning probe microscopy (SPM) images showed that the uniformity and long-range order of the titania/PEO domains improved with increasing sol-gel precursor amount. Grazing incidence small-angle X-ray scattering (GISAXS) results indicate that the ordered structures exist over large length scales. Titania nanocrystal arrays of anatase modification were obtained by calcination at 600 degrees C for 4 h. After calcination, separated particles were observed for low and medium amounts of sol-gel precursors. Films with higher precursor amounts showed wormlike structures due to the aggregation between neighboring particles. Removal of the polymer matrix via UV treatment leads to highly ordered arrays of amorphous titania while retaining the domain size and interparticle distance initially present in the hybrid films. Photoluminescence (PL) properties were investigated for samples before and after calcination. The PL intensity increases with the increasing amount of sol-gel precursor. Bands at 412 nm were ascribed to self-trapped exitons and bands at 461 and 502 nm to oxygen vacancies, respectively. Uncalcined or UV-treated samples also showed PL properties similar to calcined samples, indicating that the local environment of the titanium atoms is similar to the environment of the crystalline anatase modification.     

Biomimetic synthesis of titania nanoparticles induced by protamine

Protamine, a kind of cationic protein extracted from sperm nuclei, was employed for the first time in vitro to induce the formation of a titania/protamine nanoparticle composite from a water-stable titanium precursor, titanium(iv) bis(ammonium lactato) dihydroxide (Ti-BALDH). The resulting titania/protamine nanoparticle composite was extensively characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared (FTIR) spectroscopy, and X-ray photoelectron spectroscopy (XPS). The titania/protamine nanoparticle composite was of amorphous structure, and exhibited a different morphology from those prepared by an alkali-catalyzed approach. The catalyzing and templating function of protamine involved in the synthesis of the nanoparticle composite is discussed, and a mechanism tentatively proposed. In addition, the effects of pH and temperature on the amount and size of as-prepared titania/protamine nanoparticle composite were systematically investigated.     

ESR and photoluminescence properties of Cu doped ZnS nanoparticles

Nanoparticles of Zn1-xCuxS with Cu concentrations of x=0.0, 0.1, 0.2, 0.3 and 0.4 were prepared by a co-precipitation reaction method from homogeneous solutions of zinc and copper salts. Both the ZnS and ZnS:Cu nanoparticles excited at about 370 nm exhibits a broad green emission band peaking around 491 nm, which confirms the characteristic feature of Zn2+ as well as Cu2+ ions as luminescent centers in the lattice. The TEM micrographs showed spherical morphology for ZnS nanocrystals and the average size of the particles was estimated to be around 8.5 nm. At liquid nitrogen temperature, ESR signal characteristic of Cu2+ ions was observed in samples of all concentrations. ESR spectra analysis also indicated that Cu2+ ions enter the host lattice by replacing Zn2+ ions with distorted tetrahedral site symmetry.     

Synthesis and photoluminescence of well-dispersible anatase TiO2 nanoparticles

High-purity anatase TiO(2) nanoparticles were prepared using a low-temperature sol-gel route. The as-prepared sample was characterized by X-ray diffraction, transmission electron microscopy, infrared spectroscopy, thermogravimetric analysis, UV-vis spectroscopy, and photoluminescence. It is shown that the as-prepared sample crystallized in a pure anatase phase with an average crystallite size of about 7 nm, and the surfaces were highly hydrated. These nanoparticles were stabilized as a water suspension via the cooperation of DLVO force and surface hydration force. These suspensions showed characteristic band-gap emission at 397+/-1.5 nm, which is a little red-shifted compared with the band-gap energy of indirect electronic transition measured in the UV-vis absorption spectrum. These observations were explained by the light-induced relaxation of polar water molecules in the surface hydration layer.     

Preparation and antibacterial activities of undoped and palladium doped titania nanoparticles

Undoped and palladium doped titania nanoparticles have been prepared by sol–gel method using isopropyl alcohol as solvent. The products have been characterized through XRD, FESEM, TEM, HRTEM, FTIR, specific surface area analysis and ICPOES technologies. The antibacterial activities of the products against Escherichia coli (E. Coli) have been investigated by microcalorimetric method and antibacterial circle method, respectively. The process of E. Coli growth and metabolism affected by nanoparticles has been monitored using a Thermal Activity Monitor (TAM) Air Isothermal Calorimeter by microcalorimetric method. The results indicate that undoped and palladium doped titania nanoparticles present better antibacterial activities. Among them, 3 mol% Pd doped titania nanoparticles exhibit the best antibacterial activity due to the lowest value of minimum inhibitory concentration (MIC). This result is in accordance with that of the antibacterial circle method. This work provides a general analytic technology to quantification study antibacterial activity of nanomaterials against various bacteria by microcalorimetric method, which could be a potential application in the future.     

Facile preparation of controllable size monodisperse anatase titania nanoparticles

Monodisperse anatase titania nanoparticles with controllable sizes (typically 10-300 nm) can be synthesized using an efficient and straightforward protocol via fine tuning of the ionic strength in the devised sol-gel methodology.     

Photoconductivity and photoluminescence of ZnO nanoparticles synthesized via co-precipitation method

Photoconductivity and photoluminescence studies of ZnO nanoparticles (NPs) synthesized by co-precipitation method capped with thioglycerol are carried out. The effect of annealing at 300°C is also studied. The transmission electron micrograph (TEM) and X-ray diffraction (XRD) pattern confirm the hexagonal wurtzite structure of ZnO nanoparticles. The UV-vis absorption spectrum of ZnO NPs shows blue shift of absorption peak as compared to bulk ZnO. The photoluminescence (PL) spectra of as-synthesized ZnO NPs show band edge emission as well as blue-green emission. After annealing band edge emission is quenched. Photocurrent is found to vary super linearly at high voltage for both as-synthesized as well as annealed ZnO NPs. Time resolved rise and decay photocurrent spectra are found to exhibit anomalous photoconductivity for as-synthesized as well as annealed ZnO NPs wherein the photocurrent decreases even during steady illumination.     

Studies on surface plasmon resonance and photoluminescence of silver nanoparticles

Silver nanoparticles of different sizes were prepared by citrate reduction and characterized by UV-vis absorbance spectra, TEM images and photoluminescence spectra. The morphology of the colloids obtained consists of a mixture of nanorods and spheres. The surface plasmon resonance (SPR) and photoemission properties of Ag nanoparticles are found to be sensitive to citrate concentration. A blue shift in SPR and an enhancement in photoluminescence intensity are observed with increase in citrate concentration. Effect of addition of KCl and variation of pH in photoluminescence was also studied.     

Preparation and gas sensing activity of La and Y co-doped titania nanoparticles

Journal of Sol-Gel Science and Technology - A novel gas sensing material, La–Y co-doped TiO2 nanoparticles, was synthesized by sol–gel method and applied to detect organic pollutants...     

A novel triphenylamine-based dye sensitizer supported on titania nanoparticles and the effect of titania fabrication on its optical properties

A new synthesised triphenylamine-based dye having a branched structure with one OH-ending branch able to interact with the surface hydroxyl moieties of mesoporous TiO₂ is reported. Optical properties of the dye-titania hybrid material are presented and the higher efficiency of the dye on pure anatase TiO₂ compared to the commercial Degussa P25, which contains a rutile phase component, is confirmed. The optical and chemical properties of the dye make it a promising candidate as a metal-free dye for DSSCs or as a host for a variety of transition or main group metal ions for different applications.     

Superhydrophobic surface by immobilization of polystyrene on vinyl-modified titania nanoparticles

Abstract  

The organic–inorganic nanocomposite films were fabricated by grafting polystyrene (PS) onto the vinyltriethoxysilane (VTEOS) modified titanium dioxide nanopowders using free radical polymerization. The composition of the surfaces and the structure for the PS grafted titania (PS-g-TiO₂) were examined by infrared spectroscopy, X-ray photoelectron spectroscopy and thermogravimetric analysis, and the rough surface was confirmed by the evaluation of the morphological characteristics of the coating using hybrid particles. The wetting properties of the VTEOS modified titania and PS-g-TiO₂ films were investigated, which show the maximum static water contact angles of 160° and 154°, and minimum sliding angles of 3° and 4°, respectively.     

Formation mechanism of carbogenic nanoparticles with dual photoluminescence emission

We present a systematic investigation of the formation mechanism of carbogenic nanoparticles (CNPs), otherwise referred to as C-dots, by following the pyrolysis of citric acid (CA)-ethanolamine (EA) precursor at different temperatures. Pyrolysis at 180 °C leads to a CNP molecular precursor with a strongly intense photoluminescence (PL) spectrum and high quantum yield formed by dehydration of CA-EA. At higher temperatures (230 °C) a carbogenic core starts forming and the PL is due to the presence of both molecular fluorophores and the carbogenic core. CNPs that exhibit mostly or exclusively PL arising from carbogenic cores are obtained at even higher temperatures (300 and 400 °C, respectively). Since the molecular fluorophores predominate at low pyrolysis temperatures while the carbogenic core starts forming at higher temperatures, the PL behavior of CNPs strongly depends on the conditions used for their synthesis.     

Aged titania nanoparticles: the simultaneous control of local and long-range properties

TiO(2) nanoparticles are obtained by combining a sol-gel preparative route with hydrothermal aging steps, performed in mild conditions, of varying time lengths. Both aged and un-aged samples are thermally treated at 300 and 600 degrees C, for the same length of time. The crystal structures, the phase composition, and crystallite sizes are analyzed by powder X-ray diffraction. Raman spectra of anatase nanocrystals with average sizes of 7-10 nm are reported and the correlation between the Raman band shape of the main feature at 144 cm(-1) and the crystallite size is discussed. Nitrogen physisorption by Brunauer-Emmett-Teller (BET) method is adopted to evaluate the particles surface area and mesopore size and size distribution. The role played by the hydrothermal step in affecting the physicochemical properties of the powders is discussed also with respect to the H(2)O/TiO(2) interactions as apparent from Raman spectroscopy investigations of the O-H stretching range (3000-3800 cm(-1)).     

Preparation, phase transformation and photocatalytic activities of cerium-doped mesoporous titania nanoparticles

Cerium-doped mesoporous TiO₂ nanoparticles with high surface area and thermal stable anatase wall were synthesized via hydrothermal process in a cetyltrimethylammonium bromide (CTAB)/Ti(SO₄)₂/Ce(NO₃)₄/H₂O system. The obtained materials were characterized by XRD, FESEM, HRTEM, FTIR spectroscopy, nitrogen adsorption and DRS spectra. Experimental results indicated that the doping of cerium not only increased the surface area of mesoporous TiO₂ nanoparticles, but also inhibited the mesopores collapse and the anatase-to-rutile phase transformation. Moreover, the undoped, doped anatase mesoporous nanoparticles exhibit higher photocatalytic activity than commercial photocatalyst (Degussa, P25), but the maximum photodegradation rate corresponds to the undoped mesoporous TiO₂ nanoparticles. The lower photocatalytic activities of cerium-doped samples compared with undoped one may be ascribed to that the doped cerium partially blocks titania's surface sites available for the photodegradation and absorption of Rhodamine B (RB).     

Synthesis and suspension rheology of titania nanoparticles grafted with zwitterionic polymer brushes

Thin films of polydimethylsiloxane (PDMS) and ZnO quantum dots (QDs) were built up as multilayers by spin-coating. The films are characterized by a UV-blocking ability that increases with increasing number of bilayers. Photoluminescence (PL) emission spectra of the thin films occur at 522 nm, which is the PL wavelength of the ZnO QDs dispersion, but with a lower intensity and a quantum yield (QY) less than 1% that of the dispersion. Cross-linking has introduced new features to the absorption spectra in that the absorption peak was absent. These changes were attributed to the morphological and structural changes revealed by transmission electron microscopy (TEM) and Fourier transform infrared spectroscopy (FTIR), respectively. TEM showed that the ZnO particle size in the film increased from 7 (±2.7) nm to 16 (±7.8) upon cross-linking. The FTIR spectra suggest that ZnO QDs are involved in the cross-linking of PDMS and that the surface of the ZnO QDs has been chemically modified.     

Effect of titania nanoparticles on the morphology of low density polyethylene

The role of TiO₂ nanoparticle surfaces in affecting the crystalline structure of low‐density polyethylene (LDPE) has been investigated by varying the nanoparticle surface from hydrophilic (as‐received) to less hydrophilic (dried) or more hydrophilic (polar silane treated). Differential scanning calorimetry (DSC) and wide‐angle X‐ray diffraction (WXRD) were used to determine the degree of crystallinity and crystalline structure. The impact of nanoparticle aggregates on the nanometer to micrometer organization of LDPE crystals was studied with atomic force microscopy (AFM) and small‐angle light scattering (SALS). This characterization showed that the presence of the TiO₂ nanoparticles, with the various different surface conditions investigated, did not alter the degree of LDPE crystallinity, the unit cell dimensions, the average lamellar thickness, or the average spherulite size. However, the nanoparticles did affect the internal arrangement of intraspherulitic crystalline aggregates by decreasing the relative optic axis orientation of these crystals, usually referred to as internal spherulite disorder. The LDPE filled with the nanoparticles treated with a polar silane (N‐(2‐aminoethyl) 3‐aminopropyl‐trimethoxysilane (AEAPS)) showed the highest internal spherulitic disorder and exhibited the most poorly developed spherulite structure. The combination of SALS with AFM has allowed a detailed characterization of the morphology of the semicrystalline polymer nanocomposites. Information on the internal organization of the spherulites, the size of the nanoparticle aggregates, and the location of the nanoparticle aggregates can be uniquely obtained when both techniques are used. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 488–497, 2005     

Efficient intracellular delivery of camptothecin by silica/titania hollow nanoparticles

Silica/titania hollow nanoparticles (HNPs) with 50?nm were fabricated by using the dissolution and redeposition method and modified with anti-[human epidermal growth factor receptor 2] monoclonal antibody (herceptin), and their application as camptothecin (CPT) delivery agents to human breast cancer SK-BR-3 cells was investigated. Although the diameter of herceptin-modified HNPs (HER-HNP) is smaller than that of other reported mesoporous silica nanoparticles, the extensive hollow cavity of HNPs (ca. 30?nm) allowed the loading of a large amount of CPT. CPT-loaded HER-HNP (HER-HNP-CPT) did not release CPT in phosphate-buffered saline over a period of 24?h, however, HER-HNP-CPT in a hydrophobic solvent released its entire load of CPT. In addition, HER-HNPs were efficiently internalized owing to their herceptin conjugation and optimized size. To evaluate in vitro antitumor efficacy, apoptosis/necrosis and viability of HER-HNP-CPT-treated cells were investigated. When the cells were treated with HER-HNP-CPT for 30?min, a few apoptotic cells were observed. After 24?h, the viability of HER-HNP-CPT-treated SK-BR-3 decreased to 60?%, which revealed highly efficient chemotherapy. However, CPT loaded into HNP or HER-HNP had no significant effects on the viability of macrophages. Judging from these data, HER-HNPs are very suitable for application in anticancer therapy. A HER-HNP-CPT drug delivery system offers a new direction for a hydrophobic anticancer drug carrier and can be expanded to practical applications with further studies.