等浓度的氯化铵和硫酸铵溶液哪个pH高

有中学化学参考资料题:0.10 mol/L的NH4Cl和(NH4)2SO4溶液哪个pH值高?这似乎是个中学生可做的简单题目,仔细考虑不是如此.如果简单地认为盐酸和硫酸都是强酸,而硫酸是二元酸,硫酸铵溶液中铵盐浓度为0.20 mol/L,那么NH4Cl溶液pH高,那是不妥的.硫酸是二元酸,第一个氢离子能完全电离,第二个氢离子部分电离,如此考虑情况怎么样呢?是不是答案发生变化?这要通过计算来说明.     

Enhanced efficiency and stability in Sn-based perovskite solar cells with secondary crystallization growth

The conversion efficiencies reported for Tin(Sn)halide-based perovskite solar cells(PSCs)fall a large gap behind those of lead halide-based PSCs,mainly because of poor film quality of the former.Here we report an efficient strategy based on a simple secondary crystallization growth(SCG)technique to improve film quality for tin halide-based PSCs by applying a series of functional amine chlorides on the perovskite surface.They were discovered to enhance the film crystallinity and suppress the oxidation of Sn²⁺remarkably,hence reduce trap state density and non-irradiative recombination in the absorber films.Furthermore,the SCG film holds the band levels matching better with carrier transport layers and herein favoring charge extraction at the device interfaces.Consequently,a champion device efficiency of 8.07% was achieved alo ng with significant enhancements in VOC and JSC,in contrast to 5.35% of the control device value.Moreover,the SCG film-based devices also exhibit superior stability comparing with the control one.This work explicitly paves a novel and general strategy for developing high performance lead-free PSCs.     

Energy level engineering of charge selective contact and halide perovskite by modulating band offset:Mechanistic insights

Mixed cation and anion based perovskites solar cells exhibited enhanced stability under outdoor conditions,however,it yielded limited power conversion efficiency when TiO₂ and Spiro-OMeTAD were employed as electron and hole transport layer(ETL/HTL)respectively.The inevitable interfacial recombination of charge carriers at ETL/perovskite and perovskite/HTL interface diminished the efficiency in planar(n-i-p)perovskite solar cells.By employing computational approach for uni-dimensional device simulator,the effect of band offset on charge recombination at both interfaces was investigated.We noted that it acquired cliff structure when the conduction band minimum of the ETL was lower than that of the perovskite,and thus maximized interfacial recombination.However,if the conduction band minimum of ETL is higher than perovskite,a spike structure is formed,which improve the performance of solar cell.An optimum value of conduction band offset allows to reach performance of 25.21%,with an open circuit voltage(VOC)of 1231 mV,a current density JSC of 24.57 mA/cm² and a fill factor of 83.28%.Additionally,we found that beyond the optimum offset value,large spike structure could decrease the performance.With an optimized energy level of Spiro-OMeTAD and the thickness of mixed-perovskite layer performance of 26.56% can be attained.Our results demonstrate a detailed understanding about the energy level tuning between the charge selective layers and perovskite and how the improvement in PV performance can be achieved by adjusting the energy level offset.     

Recent Advances of Pure Organic Room Temperature Phosphorescence Materials for Bioimaging Applications

Bioimaging,as a powerful and helpful tool,which allows people to investigate deeply within living organisms,has contributed a lot for both clinical theranostics and scientific research.Pure organic room temperature phosphorescence(RTP)materials with the unique features of ultralong luminescence lifetime and large Stokes shift,can efficiently avoid biological autofluorescence and scattered light through a time-resolved imaging modality,and thus are attracting increasing attention.This review classifies pure organic RTP materials into three categories,including small molecule RTP materials,polymer RTP materials and supramolecular RTP materials,and summarizes the recent advances of pure organic RTP materials for bioimaging applications.     

A new strategy to access Co/N co-doped carbon nanotubes as oxygen reduction reaction catalysts

Carbon nanotubes(CNTs),as one-dimensional nanomaterials,show great potential in energy conversion and storage due to their efficient electrical conductivity and mass transfer.However,the security risks,time-consuming and high cost of the preparation process hinder its further application.Here,we develop that a negative pressure rather than a following gas environment can promote the generation of cobalt and nitrogen co-doped CNTs(Co/N-CNTs) by using cobalt zeolitic imidazolate framework(ZIF-67) as a precursor,in which the negative pressure plays a key role in adjusting the size of cobalt nanoparticles and stimulating the rearragement of carbon atoms for forming CNTs.Importantly,the obtained Co/N-CNTs,with high content of pyridinic nitrogen and abundant graphitized structure,exhibit superior catalytic activity for oxygen reduction reaction(ORR) with half-wave potential(E_1/2) of 0.85 V and durability in terms of the minimum current loss(2%) after the 30,000 s test.Our development provides a new pathway for large-scale and cost-effective preparation of metal-doped CNTs for various applications.     

Stabilizing High-voltage Cathode Materials for Next-generation Li-ion Batteries

The pressing demand for high-energy/power lithium-ion batteries requires the deployment of cathode materials with higher capacity and output voltage.Despite more than ten years of research,high-voltage cathode mate-rials,such as high-voltage layered oxides,spinel LiNi0.5Mn1.5O4,and high-voltage polyanionic compounds still cannot be commercially viable due to the instabilities of standard electrolytes,cathode materials,and cathode electrolyte interphases under high-voltage operation.This paper summarizes the recent advances in addressing the surface and interface issues haunting the application of high-voltage cathode materials.The understanding of the limitations and advantages of different modification protocols will direct the future endeavours on advancing high-energy/power lithium-ion batteries.     

Suppressing trap states and energy loss by optimizing vertical phase distribution through ternary strategy in organic solar cells

Suppressing the trap-state density and the energy loss via ternary strategy was demonstrated.Favorable vertical phase distribution with donors(acceptors)accumulated(depleted)at the interface of active layer and charge extraction layer can be obtained by introducing appropriate amount of polymer acceptor N2200 into the systems of PBDB-T:IT-M and PBDB-TF:Y6.In addition,N2200 is gradiently distributed in the vertical direction in the ternary blend film.Various measurements were carried out to study the effects of N2200 on the binary systems.It was found that the optimized morphology especially in vertical direction can significantly decrease the trap state density of the binary blend films,which is beneficial for the charge transport and collection.All these features enable an obvious decrease in charge recombination in both PBDB-T:IT-M and PBDB-TF:Y6 based organic solar cells(OSCs),and power conversion efficiencies(PCEs)of 12.5%and 16.42%were obtained for the ternary OSCs,respectively.This work indicates that it is an effective method to suppress the trap state density and thus improve the device performance through ternary strategy.     

Conformational Properties of Comb-shaped Polyelectrolytes with Negatively Charged Backbone and Neutral Side Chains Studied by a Generic Coarse-grained Bead-and-Spring Model

A generic coarse-grained bead-and-spring model,mapped onto comb-shaped polycarboxylate-based(PCE)superplasticizers,is developed and studied by Langevin molecular dynamics simulations with implicit solvent and explicit counterions.The agreement on the radius of gyration of the PCEs with experiments shows that our model can be useful in studying the equilibrium sizes of PCEs in solution.The effects of ionic strength,side-chain number,and side-chain length on the conformational behavior of PCEs in solution are explored.Single-chain equilibrium properties,including the radius of gyration,end-to-end distance and persistenee length of the polymer backbone,shape-asphericity parameter,and the mean span dimension,are determined.It is found that with the increase of ionic strength,the equilibrium sizes of the polymers decrease only slightly,and a linear dependenew of the persistence length of backbone on the Debye screening length is found,in good agreement with the theory developed by Dobrynin.Increasing side-chain numbers and/or side-chain lengths increases not only the equilibrium sizes(radius of gyration and mean span)of the polymer as a whole,but also the persistence length of the backbone due to excluded volume interactions.     

Three-dimensionalization via control of laser-structuring parameters for high energy and high power lithium-ion battery under various operating conditions

Laser-structuring is an effective method to promote ion diffusion and improve the performance of lithium-ion battery(LIB)electrodes.In this work,the effects of laser structuring parameters(groove pitch and depth)on the fundamental characteristics of LIB electrode,such as interfacial area,internal resistances,material loss and electrochemical performance,are investigated,LiNi_0.5Co_0.2Mn_0.3O₂ cathodes were structured by a femtosecond laser by varying groove depth and pitch,which resulted in a material loss of 5%-14%and an increase of 140%-260%in the in terfacial area between electrode surface and electrolyte.It is shown that the importance of groove depth and pitch on the electrochemical performance(specific capacity and areal discharge capacity)of laser-structured electrode varies with current rates.Groove pitch is more im porta nt at low current rate but groove depth is at high curre nt rate.From the mapping of lithium concentration within the electrodes of varying groove depth and pitch by laser-induced breakdown spectroscopy,it is verified that the groove functions as a diffusion path for lithium ions.The ionic,electronic,and charge transfer resistances measured with symmetric and half cells showed that these internal resistances are differently affected by laser structuring parameters and the changes in porosity,ionic diffusion and electronic pathways.It is demonstrated that the laser structuring parameters for maximum electrode performance and minimum capacity loss should be determined in consideration of the main operating conditions of LIBs.     

Mesh-like vertical structures enable both high areal capacity and excellent rate capability

In order to balance electrochemical kinetics with loading level for achieving efficient energy storage with high areal capacity and good rate capability simultaneously for wearable electronics,herein,2 D meshlike vertical structures(NiCo_2 S_4@Ni(OH)_2) with a high mass loading of 2.17 mg cm^-2 and combined merits of both 1 D nanowires and 2 D nanosheets are designed for fabricating flexible hybrid supercapacitors.Particularly,the seamlessly interconnected NiCo_2 S_4 core not only provides high capacity of 287.5 μAh cm^-2 but also functions as conductive skeleton for fast electron transport;Ni(OH)_2 sheath occupying the voids in NiCo_2 S_4 meshes contributes extra capacity of 248.4 μAh cm^-2;the holey features guarantee rapid ion diffusion along and across NiCO_2 S_4@Ni(OH)_2 meshes.The resultant flexible electrode exhibits a high areal capacity of 535.9 μAh cm^-2(246.9 mAh g^-1) at 3 mA cm^-2 and outstanding rate performance with 84.7% retention at 30 mA cm^-2,suggesting efficient utilization of both NiCo_2 S_4 and Ni(OH)_2 with specific capacities approaching to their theoretical values.The flexible solid-state hybrid device based on NiCo_2 S_4@Ni(OH)_2 cathode and Fe_2 O_3 anode delivers a high energy density of 315 μWh cm^-2 at the power density of 2.14 mW cm^-2 with excellent electrochemical cycling stability.     

草酸锌空心纳米结构的一步固相合成及其表征

本文利用醋酸锌和草酸的一步低热固相化学反应制备了草酸锌空心纳米球，并通过在该反应体系中加入表面活性剂聚乙二醇400得到了草酸锌空心纳米链。采用X-射线粉末衍射（XRD）、透射电镜（TEM）、高倍透射电镜(HRTEM)、扫描电镜(SEM)、红外(IR) 以及热重-差热(TG/DTA)分析对所合成的样品进行了表征.     

氧化镁标准物质的研制

介绍氧化镁标准物质的研制过程，氯化镁轻重结晶提纯，与草酸铵反应制得草酸镁，将草酸镁煅烧制备成氧化镁标准物质，采用称量滴定法进行定值，实验结果表明，该标准物质定值结果准确，均匀性，稳定性良好，满足实际工作的需要。     

Chemical‐Template Synthesis of Micro/Nanoscale Magnesium Silicate Hollow Spheres for Waste‐Water Treatment

Micro/nanoscale magnesium silicate hollow spheres were synthesized by using silica colloidal spheres as a chemical template in one pot. The hollow spherical structure, consisting of well‐separated nanoscale units, was microscale as a whole and could be easily handled in solution. The as‐synthesized magnesium silicate hollow spheres with large specific surface area showed availability for the removal of organic and heavy‐metal ions efficiently from waste water. Importantly, the micro/nanoscale magnesium silicate hollow spheres that had adsorbed organic pollutants could be regenerated by calcination and used repeatedly in pollutant removal. Magnesium silicate hollow spheres synthesized by a scaled‐up chemical template method may have potential applications in removing cationic dyes and heavy‐metal ions from waste water.     

Template-free magnesium oxide hollow sphere inclusion in organic-inorganic hybrid films via sol-gel reaction

Magnesium oxide hollow spheres without a template core were conveniently prepared by stabilized bubble formation in a hybrid solution containing a magnesium acetate precursor, thus avoiding the complicated preparation process using a template. The hollow sphere could be aligned along the radial striation by spin coating, and its diameter from a micrometer to submicrometer dimension could be easily modified by the solution composition. It was also possible to control the open or closed hollow sphere by changing the solvent. Thus, the produced magnesium oxide hollow sphere is envisioned to have applications in many areas such as medicine, analysis, optics, and so on.     

中空SiO_2纳米微球的制备与表征

在乙醇/氨水介质中,将SiO2包覆在聚乙烯吡咯烷酮(PVP)功能化的聚苯乙烯(PS)微粒表面,利用一步法得到了中空纳米二氧化硅微球;研究了影响中空纳米二氧化硅微球形成的主要因素,并探讨了中空纳米SiO2微球的可能形成机理.结果表明,在一定的反应时间下,当氨水用量为0.6 mL、温度为70℃时,可以获得空心结构的SiO2纳米微球;通过控制四乙基原硅酸盐(TEOS)的量可以调节微球的包覆层厚度.     

A Strategy to Synthesize Hollow Micro/Nanospheres with Tunable Shell Thickness

A simple one‐step direct templating method is developed to synthesize hollow carbon and sandwich‐like ZnO/C/ZnO micro/nanospheres. The type and shell thickness of the final products can be controlled by simply adjusting the reaction temperature. The removal of the templates can also be easily controlled during the synthesis. At a low temperature, the templates remain in the products to form hollow sandwich‐like micro/nanospheres. As the reaction temperature rises, the templates are consumed, which results in the preparation of hollow carbon micro/nanospheres. On the basis of a series of experiments, we propose a simple plausible mechanism to address the original strategy for synthesizing these hollow micro/nanospheres. Furthermore, the sandwich‐like ZnO/C/ZnO nanospheres can be used as the anode in lithium‐ion batteries, exhibiting an extraordinary cyclability and a high coulombic efficiency. This approach can be extended to the synthesis of other hollow spheres. Further investigation is underway in our group.     

Controlled synthesis of monodisperse sub-100 nm hollow SnO2 nanospheres: a template- and surfactant-free solution-phase route, the growth mechanism, optical properties, and application as a photocatalyst

Controlled synthesis of low‐dimensional materials, such as nanoparticles, nanorods, and hollow nanospheres, is vitally important for achieving desired properties and fabricating functional devices. We report a systematic investigation of the growth of low‐dimensional sub‐100 nm SnO₂ hollow nanostructures by a mild template‐ and surfactant‐free hydrothermal route, aiming to achieve precise control of morphology and size. The starting materials are potassium stannate and urea in an ethylene glycol (EG)/H₂O system. We found the size of the SnO₂ hollow nanospheres can be controlled by simply adjusting the urea concentration. Investigation of the mechanism of formation of the SnO₂ hollow nanospheres revealed that reaction time, urea concentration, and reaction temperature make significant contributions to the growth of hollow nanospheres. On switching the solvent from EG/H₂O to H₂O or ethanol, the SnO₂ nanostructures changed from nanospheres to ultrafine nanorods and nanoparticles. On the basis of reaction parameter dependent experiments, oriented self‐assembly and subsequent evacuation through Ostwald ripening are proposed to explain the formation of hollow nanostructures. Their size‐dependent optical properties, including UV/Vis absorption spectra and room‐temperature fluorescence spectra, were also studied. Moreover, the studies on the photocatalytic property demonstrate that the fabricated hollow structures have slightly enhanced photocatalytic degradation activity for rhodamine B when exposed to mercury light irradiation compared to solid SnO₂ nanospheres under the same conditions. The synthesized tin oxide nanoparticles display high photocatalytic efficiency and have potential applications for cleaning polluted water in the textile industry.     

A bis(p-sulfonatophenyl)phenylphosphine-based synthesis of hollow Pt nanospheres

We report herewith the synthesis of hollow Pt nanospheres by using bis(p-sulfonatophenyl)phenylphosphine to selectively remove the Ag cores of Ag-Pt core-shell nanoparticles. Core-shell Ag-Pt nanoparticles were first obtained by the successive reduction method with a discontinuous Pt shell to allow the BSPP passage. Transmission electron microscopy imaging of the core-shell Ag-Pt nanoparticles before and after BSPP dissolution showed little changes in the particle size, indicating that the removal of the Ag cores had occurred isomorphously. The hollow Pt nanospheres, together with the predecessor Ag-Pt core-shell particles of the same size, were transferred from water to toluene and surface modified by dodecylamine in toluene. This allows the catalytic activities of solid and hollow Pt particles in room temperature methanol oxidation reaction to be compared under conditions of identical particle size and the same surface environment. The measured higher specific activity of the Pt hollow nanospheres could then be attributed unambiguously to the larger specific surface area prevalent in the porous hollow structure.     

One-pot synthesis of hollow Au3Cu1 spherical-like and biomineral botallackite Cu2(OH)3Cl flowerlike architectures exhibiting antimicrobial activity

A new form of Au3Cu1 hollow nanostructure was prepared by the reaction of Cu nanoparticles with HAuCl4. Following a course of aging, the biomineral botallackite Cu2(OH)3Cl nanoflowers were developed with the aid of Au3Cu1 hollow nanostructures at room temperature. It was proposed that the hollow nanospheres could serve as active centers for heterogeneous nucleation and mediated a mineralization process. Scanning electron microscopy and high-resolution transmission electron microscopy indicated that the nanoflowers are three-dimensional in appearance with a range of 500 nm-- to 1 microm in size and made of several nanopetals with about 25 nm in thickness. In addition, we found that the shape separation could be achieved by using cationic cetyltrimethylammonium bromide to filter the different morphology spherical- and flowerlike structures due to the negative charge of hollow nanospheres. Both hollow nanospheres and nanoflowers presented antimicrobial activity toward Streptococcus aureus with MIC50 at 39.6 and 127.2 microg/mL, respectively.     

Controllable synthesis and photoluminescence of single-crystalline BaHfO3 hollow micro- and nanospheres

This paper presents a facile hydrothermal route to synthesize monodispersive and single-crystalline BaHfO(3) hollow micro- and nanospheres in a concentrated basic environment. The hollow spheres were size tunable from submicrometer to nanoscale by simply adjusting the base concentration at a suitable temperature. The base concentration played the key role on forming BaHfO(3) hollow spheres. Detailed investigations on base concentration, reaction temperature, and duration indicated that the formation of BaHfO(3) hollow spheres was driven by Ostwald ripening process. Because of the abundance of defects, the as-prepared BaHfO(3) hollow nanospheres exhibited a blue light emission under UV-light excitation at room temperature. Calcination led to the photoluminescence declination due to the decrease of defects.