Optically active polymer containing P‐stereogenic bisphosphine as a repeating unit in the main was successfully synthesized. A coordinated borane on the phosphorus atom could be completely removed by an organic base under mild condition, and the successive reaction with Pd afforded the corresponding polymer complex. The chirality of P‐stereogenic centers was transferred to the m‐phenylene‐ethynylene linkers by complexation because of the prohibition of the rotary motion of the bisphosphine‐Pd unit.
An automated parallel synthetic approach has been developed for synthesizing polymer libraries by the Macromolecular Design via the Interchange of Xanthates (MADIX) process. The experimental set‐up, parallel polymerizations, characterization, and reproducibility tests are detailed. Examples of acrylic diblock copolymers synthesized in this way are given.
Automated MADIX polymerizations of BA in the presence of a X1 ‐capped PEA. 相似文献
Photolabile polymer brushes with tailored length containing a photoremovable protecting group (NVOC) are prepared via the SI‐ATRP method. Upon light irradiation, the NVOC group is removed to generate controlled densities of free amine groups (PAMA) randomly distributed along the brush. The presence of the ionizable groups induces a photo‐triggered swelling response. The swelling degree can be tuned by the irradiation dose. A dual (light and pH), tunable response is demonstrated.
Cross‐linked lyotropic liquid crystal (LLC) assemblies represent a new class of polymer materials for membrane applications. These materials are formed by the phase‐segregation and self‐assembly of polymerizable amphiphiles in water into condensed ordered ensembles that can be cross‐linked in situ with retention of microstructure. The resulting LLC polymer networks have ordered, nanometer‐scale aqueous and cross‐linked organic domains, which can be used to affect gas solubility and diffusivity through the polymer to help separate molecules via the solution–diffusion mechanism. The open aqueous domains can also be used for pore transport and size exclusion with resolution on the molecular size level. The use and application potential of cross‐linked LLC assemblies as gas separation membranes, selective vapor barrier materials, and water nanofiltration and desalination membranes are presented.
A novel pH‐responsive polymer vesicle obtained by the aqueous self‐assembly of carboxy‐terminated hyperbranched polyesters is reported. The synthesis is very simple, just a one‐step esterification of the commercially available hydroxy‐terminated hyperbranched polyester of Boltorn Hx (x = 20, 30, 40) with succinic anhydride. The vesicle size can be controlled from 200 nm to 10 µm by simply adjusting the solution pH as well as the degrees of branching (or generation).
Smectic‐A elastomers combine the positional long‐range order of mesogenic molecules in one dimension with the rubber elasticity of a polymer network. Upon mechanical deformation, completely different responses of the phase structure have been reported. We present a highly distorted system which shows a breakdown of smectic layering but no reorientation under deformation along the layer normal, while the phase structure stays unaffected under uniaxial stress in the perpendicular direction. The thermoelastic properties, macroscopic dimensions and stress–strain behaviour are investigated parallel and perpendicular to the layer normal. SAXS measurements supply evidence for a breakdown of the macroscopically ordered layer structure indicated by the small angle intensities and correlation length, whereas the orientational order is preserved. We propose defects in the smectic layer structure to be the origin of the different responses of different smectic elastomers.
End‐capped, low molecular weight polymers have found numerous practical applications. By providing the end‐capper molecules with specific chemical functionality, the polymer material can be equipped with a desired chemical behavior for product application or polymer processing. Using probabilistic methods, formulas are derived for calculating the target molecular weight distribution and its averages for the case of linear condensation polymerization. The formulas are generally applicable, allowing for arbitrary amounts of monofunctional monomers or end‐capper molecules affecting either one or both functional groups involved in the polymerization process.
pH‐responsive PHEMA‐based polymeric nanostructures were grown in a controlled manner by ATRP‐based surface‐initiated polymerization. Initiator nanopatterns were obtained on silicon wafers covered with OTS resists made by AFM scanning probe oxidation lithography. AFM images confirmed isolated grafting of stimuli‐responsive hedge and dot brush structures exhibiting dimensions corresponding to a few tens of chains.
New multifunctional copoly(2‐oxazoline) nanoparticles were prepared for cell studies. The polymer contains double‐bond side chains as potential reaction sites for “thio”‐click reactions as well as a fluorescein label covalently bound to the polymer backbone. Using the nanoprecipitation technique, spherical nanoparticles of 200–800 nm were obtained. Confocal laser scanning microscopy measurements revealed the cellular uptake of the nanoparticles.
While network‐like assemblies are formed by amphiphilic polyphosphazenes with poly(N‐isopropylacrylamide) and ethyl tryptophan as side groups in aqueous solution, a significant morphology transformation is observed when small molecules that exhibit hydrogen‐bonding interactions with amphiphilic copolymers are introduced during the preparation of polymeric assemblies through a dialysis procedure. Depending on copolymer composition and the content of small molecules introduced, aggregates ranging from general vesicles, high‐genus vesicles, to well‐defined nanospheres can be prepared successfully as clearly evidenced by TEM observation, which suggests this procedure should be a novel approach to prepare composite vesicles.
Green nanocomposite coatings based on renewable plant oils have been developed. An acid‐catalyzed curing of epoxidized plant oils with 3‐glycidoxypropyltrimethoxysilane produced transparent nanocomposites. The hardness and mechanical strength improved by incorporating the silica network into the organic polymer matrix, and good flexibility was observed in the nanocomposite. The nanocomposites showed high biodegradability.
Microgel rings have been fabricated on a glass surface by a micro‐transfer technique. The polymer melt is transferred to the substrate surface in a confined space with a picoliter volume along the boundary of the polymeric stamp. The surface of the polymer features is smoothened by surface tension in an annealing cycle, which results in isotropic rings. After cross‐linking, the microgels respond swiftly when immersed in water. Asymmetric rings are also obtained by tilting the substrate. The microgels can detach from the substrate to form a suspension of the rings. Conjugated rings have also been fabricated by supplementing functional molecules into the poly(ethylene glycol) network.
In this study, highly stable gold and silver nanoparticles evenly distributed within a crosslinked poly(acrylamide)/poly(N‐(hydroxymethyl)acrylamide) (PAAm‐PHMAAm) network have been fabricated without addition of a reducing agent. Remarkably, the same chemical hydrogel composition has been involved in the successful fabrication of spherical gold and silver nanoparticles within the hydrogel template. The hydrogel network acts simultaneously as an efficient reducing agent and stabilizer. The PAAm–PHMAAm hydrogel network binds metal ions and, following reduction of bound to crosslinked template metal ions, proceeds via oxidation of hydroxymethyl hydrogel fragments. A one‐electron mechanism is proposed for the formation of the silver and gold nanoparticles.
It has been clarified that syndiotactic polystyrene (sPS) forms co‐crystalline structures with polyethylene glycol dimethyl ethers (PEGDMEs) with molecular weights ranging from 178 to 1 000 g · mol−1 through a guest exchange procedure assisted by a plasticizing agent. The PEGDME molecules are incorporated into the spaces between sPS polymer sheets consisting of (T2G2)2 helices. The results of X‐ray diffraction and gravimetric measurements suggest that one or less molecules are included per unit cell for PEGDME with average molecular weight of 1 000 g · mol−1, which indicates the possibility that longer polymeric molecules can be introduced into sPS lattices with multiple site occupation.
POSS‐functionalized polyisobutylenes (PIBs) were synthesized by carbocationic polymerization using an epoxy‐POSS/TiCl4 initiating system in hexane/methyl chloride (60:40 v/v) solvent mixture at −80 °C. 1H NMR spectroscopy verified the incorporation of one epoxy‐POSS per polymer chain. Light scattering and TEM analysis demonstrated the formation of 50–100 nm sized aggregates and micron‐sized clusters.
Summary: We describe a simple photochemical process that allows the covalent attachment of a variety of different polymers at room temperature onto aluminium surfaces. The system is based on a photoreactive benzophenone derivative that is bound to aluminium surfaces by a phosphonic acid anchor. The synthesis of the phosphonic acid is described and the immobilization of this compound is studied by X‐ray photoelectron and FT‐IR spectroscopy. After deposition of the polymeric coating, UV light illumination at 365 nm, and solvent extraction of the substrate, polymer monolayers are obtained that are chemically bound to the surface.
Covalent attachment of polymers to the aluminium‐bound benzophenone phosphonic acid. 相似文献
A cationic water‐soluble polyfluorene (P2) containing a high density of tetraalkylammonium side chains in polymer backbone was synthesized and characterized. The polymer shows excellent water solubility up to 100 mg · mL−1 as well as high photoluminescence (PL) quantum yield of 44% in water. The relatively high cationic density and appropriate side chain length of the polymer are the key factors to achieve such high water solubility. The reduction potential of P2 is decreased as compared with its neutral polymer, reflecting the enhanced electron injection abilities. The standard NPB/Alq3 device using such a polymer as the electron injection layer shows nearly three‐fold enhancement in the electroluminescence (EL) efficiency.
Crystallization of poly(2‐isobutyl‐2‐oxazoline) and poly(2‐nonyl‐2‐oxazoline) is found to occur by room temperature annealing below the upper critical solution temperature in ethanol–water solvent mixtures. Both polymers produce similar self‐assembled structures (see image), resembling the previously reported crystalline hierarchical structures obtained from hot aqueous poly(2‐isopropyl‐2‐oxazoline) solutions above the lower critical solution temperature. These observations suggest that the crystallization induced self‐assembly process is a rather general phenomenon occurring for semicrystalline polymers in liquid–liquid two phase systems.
