A new, visible light‐catalyzed, one‐pot and one‐step reaction is successfully employed to design well‐controlled side‐chain functionalized polymers, by the combination of ambient temperature revisible addtion‐fragmentation chain transfer (RAFT) polymerization and click chemistry. Polymerizations are well controlled in a living way under the irradiation of visible light‐emitting diode (LED) light without photocatalyst and initiator, using the trithiocarbonate agent as iniferter (initiator‐transfer agent‐terminator) agent at ambient temperature. Fourier transfer infrared spectroscopy (FT‐IR), NMR, and matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry (MALDI‐TOF‐MS) data confirm the successful one‐pot reaction. Compared to the reported zero‐valent metal‐catalyzed one‐pot reaction, the polymerization rate is much faster than that of the click reaction, and the visible light‐catalyzed one‐pot reaction can be freely and easily regulated by turning on and off the light.
A one‐pot procedure that straightforwardly combines reversible addition‐fragmentation chain transfer (RAFT) polymerization and end group transformation to remove the RAFT end groups is developed for the synthesis of well‐defined poly(meth)acrylates and polyacrylamides with inert end groups. This procedure only requires the addition of an amine at the end of the standard RAFT polymerization procedure, which avoids the separation and purification of the intermediate polymers and, hence, extremely reduces the working time and utilized amount of solvents. Upon addition of the amine, a thiol group is formed by aminolysis of the thiocarbonylthio group, which subsequently undergoes Michael addition with unreacted monomer leading to an inert thioether functionalized polymer.
A simple polymerization of trichlorophosphoranimine (Cl3P = N−SiMe3) mediated by functionalized triphenylphosphines is presented. In situ initiator formation and the subsequent polymerization progress are investigated by 31P NMR spectroscopy, demonstrating a living cationic polymerization mechanism. The polymer chain lengths and molecular weights of the resulting substituted poly(organo)phosphazenes are further studied by 1H NMR spectroscopy and size exclusion chromatography. This strategy facilitates the preparation of polyphosphazenes with controlled molecular weights and specific functional groups at the α‐chain end. Such well‐defined, mono‐end‐functionalized polymers have great potential use in bioconjugation, surface modification, and as building blocks for complex macromolecular constructs.
Hyperbranched polymers are important soft nanomaterials but robust synthetic methods with which the polymer structures can be easily controlled have rarely been reported. For the first time, we present a one‐pot one‐batch synthesis of polytriazole‐based hyperbranched polymers with both low polydispersity and a high degree of branching (DB) using a copper‐catalyzed azide–alkyne cycloaddition (CuAAC) polymerization. The use of a trifunctional AB2 monomer that contains one alkyne and two azide groups ensures that all Cu catalysts are bound to polytriazole polymers at low monomer conversion. Subsequent CuAAC polymerization displayed the features of a “living” chain‐growth mechanism with a linear increase in molecular weight with conversion and clean chain extension for repeated monomer additions. Furthermore, the triazole group in a linear (L) monomer unit complexed CuI, which catalyzed a faster reaction of the second azide group to quickly convert the L unit into a dendritic unit, producing hyperbranched polymers with DB=0.83. 相似文献
Summary: Plasma‐initiated controlled/living radical polymerization of methyl methacrylate (MMA) was carried out in the presence of 2‐cyanoprop‐2‐yl 1‐dithionaphthalate. Well‐defined poly(methyl methacrylate) (PMMA), with a narrow polydispersity, could be synthesized. The polymerization is proposed to occur via a RAFT mechanism. Chain‐extension reactions were also successfully carried out to obtain higher molecular weight PMMA and PMMA‐block‐PSt copolymer.
Dependence of ln([M]0/[M]) on post‐polymerization time (above), and \overline M _{\rm n} and PDI against conversion (below) for plasma initiated RAFT polymerization of MMA at 25 °C. 相似文献
Summary: The bromine chain ends of well‐defined polystyrene ( = 2 700 g · mol−1, = 1.11) prepared using ATRP were successfully transformed into various functional end groups (ω‐hydroxy, ω‐carboxyl and ω‐methyl‐vinyl) by a two‐step pathway: (1) substitution of the bromine terminal atom by an azide function and (2) 1,3‐dipolar cycloaddition of the terminal azide and functional alkynes (propargyl alcohol, propiolic acid and 2‐methyl‐1‐buten‐3‐yne). The “click” cycloaddition was catalyzed efficiently by the system copper bromide/4,4′‐di‐(5‐nonyl)‐2,2′‐bipyridine. In all cases, 1H NMR spectra indicated quantitative transformation of the chain ends of polystyrene into the desired function.
Preparation of well‐defined functional polymers possessing diverse chain‐end functionalities by the combination of atom transfer radical polymerization and click chemistry. 相似文献
The RAFT agents RAFT‐1 and RAFT‐2 were used for RAFT polymerization to synthesize well‐defined bimodal molecular‐weight‐distribution (MWD) polymers. The system showed excellent controllability and “living” characteristics toward both the higher‐ and lower‐molecular‐weight fractions. It is important that bimodal higher‐molecular‐weight (HMW) polymers and block copolymers with both well‐controlled molecular weight (MW) and MWD could be prepared easily due to the “living” features of RAFT polymerization. The strategy realized a mixture of higher/lower‐molecular‐weight polymers at the molecular level but also preserved the features of living radical polymerization (LRP) of the RAFT polymerization. 相似文献
Well‐defined figure‐of‐eight‐shaped (8‐shaped) polystyrene (PS) with controlled molecular weight and narrow polydispersities has been prepared by the combination of atom transfer radical polymerization (ATRP) and click chemistry. The synthesis involves two steps: 1) Preparation of a linear tetrafunctional PS with two azido groups, one at each end of the polymer chain, and two acetylene groups at the middle of the chain. 2) Intramolecular cyclization of the linear tetrafunctional PS at a very low concentration by a click reaction to produce the 8‐shaped polystyrenes. The resulting intermediates and the target polymers were characterized by 1H NMR and FT‐IR spectroscopy, and gel permeation chromatography. The glass transition temperatures (Tgs) were determined by differential scanning calorimetry and it was found that the decrease in chain mobility by cyclization resulted in higher Tgs for 8‐shaped polystyrenes as compared to their corresponding precursors.
Comb‐shaped glycopolymer/peptide bioconjugates are constructed by grafting reduced glutathione (GSH) onto acrylate‐functional block glycocopolymers via thiol‐ene click chemistry. In aqueous solution, the glycopolymer/GSH bioconjugate self‐assembles to sugar‐installed spherical micelles. The size of micelles decreases with increasing pH, demonstrating pH‐responsive character. The isoelectric point (IEP) of the PMAGlc/GSH bioconjugate is estimated to be 3.43. The micelles show a specific interaction with the protein Concanavalin A. At endosomal pH, the PMAGlc/GSH bioconjugate can gradually degrade. These pH‐responsive glycopolymer/peptide micelles with biological recognition and degradation can be used as multifunctional nanocarriers for targeted drug delivery.
PS grafted silica nanoparticles have been prepared by a tandem process that simultaneously employs RAFT polymerization and click chemistry. In a single pot procedure, azide‐modified silica, an alkyne functionalized RAFT agent and styrene are combined to produce the desired product. As deduced by thermal gravimetric and elemental analysis, the grafting density of PS on the silica in the tandem process is intermediate between analogous “grafting to” and “grafting from” techniques for preparing PS brushes on silica. Relative rates of RAFT polymerization and click reaction can be altered to control grafting density.
Summary: The debate on the mechanism of dithiobenzoate‐mediated RAFT polymerization may be resolved by including the reaction between a propagating radical and the star‐shaped combination product from irreversible termination into the kinetic scheme. By this step, a highly reactive propagating radical and a not overly stable three‐arm star species are transformed into the resonance‐stabilized RAFT intermediate radical and a very stable polymer molecule. The time evolution of concentrations is discussed for the main‐equilibrium range of CDB‐mediated methyl acrylate polymerization.
Illustration of the novel understanding of the RAFT mechanism in dithiobenzoate‐mediated RAFT polymerization. 相似文献
A simple efficient post‐modification route to the fabrication of hybrid gold nanoparticles with poly(N‐isopropylacrylamide) (PNIPAm) based on click chemistry is described. The PNIPAm was prepared by reversible addition fragmentation chain transfer radical polymerization (RAFT). The PNIPAm was immobilized onto gold nanoparticles with grafting densities of 5.8 chains · nm−2 by a click reaction. The hybrid gold nanoparticles showed a temperature responsive phenomenon as the temperature changed between 20 and 45 °C.
Advanced polymerization methodologies, such as reversible addition‐fragmentation transfer (RAFT), allow unprecedented control over star polymer composition, topology, and functionality. However, using RAFT to produce high throughput (HTP) combinatorial star polymer libraries remains, to date, impracticable due to several technical limitations. Herein, the methodology “rapid one‐pot sequential aqueous RAFT” or “rosa‐RAFT,” in which well‐defined homo‐, copolymer, and mikto‐arm star polymers can be prepared in very low to medium reaction volumes (50 µL to 2 mL) via an “arm‐first” approach in air within minutes, is reported. Due to the high conversion of a variety of acrylamide/acrylate monomers achieved during each successive short reaction step (each taking 3 min), the requirement for intermediary purification is avoided, drastically facilitating and accelerating the star synthesis process. The presented methodology enables RAFT to be applied to HTP polymeric bio/nanomaterials discovery pipelines, in which hundreds of complex polymeric formulations can be rapidly produced, screened, and scaled up for assessment in a wide range of applications.
下载免费PDF全文