Interfacial structure of Co porphyrins on Au(111) electrode: Interaction of porphyrin molecules with substrate

Interfacial structures of cobalt(II) porphine (CoP) and [2,3,7,8,12,13,17,18‐octaethyl‐21H,23-H-porphine]cobalt(II) (CoOEP) have been studied on Au(111) electrode using electrochemical scanning tunneling microscopy (EC-STM), in-situ X-ray diffraction, and density functional theory (DFT) calculations. The adsorption of porphyrins affects the reconstruction of Au(111) surface. The adsorption of CoP causes a lifting of the reconstruction to a complete 1 × 1 structure of Au(111). On CoOEP modified Au(111), the unit cell periodicity of the reconstructed substrate structure expands compared with the √3 × 23 structure of bare Au(111). The same expanded substrate structure was observed on Au(111) modified with OEP without the coordinated Co ion; the coordinated metal ion of the adsorbed porphyrin molecule does not affect the substrate structure. This result indicates that the interaction of conjugated π electrons of porphyrin with the substrate is stronger than that of the coordinated Co ion. In-situ X-ray diffraction and DFT calculation support non-covalent interaction of porphyrins with the Au(111) surface.     

Variable temperature STM study of Co deposition on a dodecanethiol self assembled monolayer

The present scanning tunneling microscopy study reports on the growth processes of Co vapor-deposited on a dodecanethiol (DDT) self-assembled monolayer (SAM)/Au(111). We observe strongly modified surface and depth diffusions of Co adatoms depending on the growth temperature. Co deposited at 300 K shows an extremely incomplete regime of condensation on the organic layer. Besides, Co penetrates the DDT monolayer and resides at the DDT/Au(111) interface as 2D clusters. This phenomenon takes place through defects in the SAM which are transient channels. In contrast, Co deposited at 50 K shows a complete condensation and nucleates on defects of the SAM layer as 3D islands sitting most likely on top of the DDTs. These results are of interest in the growing field of organic spintronics where the quality of the organic/ferromagnetic interface is a key issue.     

Electrodeposited cobalt films: hcp versus fcc nanostructuring and magnetic properties

The crystallographic structure and morphology of electrodeposited cobalt films on Au(111) is found to be very sensitive on the electrolyte pH value and on the overpotential applied during deposition. The samples, 2 to 500 nm thick, where characterized by nuclear magnetic resonance (NMR), atomic force microscopy (AFM) and electron diffraction. The latter technique shows that the Co films grow in registry with the gold underlayer, reproducing the Au(111) texture. During the first stage of growth and depending on overpotential and pH value, either continuous hcp Co films or hcp Co islands are formed. Only the latter growth mode leads to an out of plane magnetization with 100% of remanence. Increasing the thickness, fcc Co becomes the prevailing phase. Eventually the fcc to hcp ratio saturates at the same value regardless the overpotential. The thickness for which the equilibrium fcc to hcp ratio is obtained as well as the sample structure and morphology before saturation, depend strongly on the overpotential value. In any case, the predominance of the fcc Co phase leads to an in plane magnetization of the thick samples. This study opens up new opportunities of engineering the properties of electrodeposited cobalt films. Received 29 February 2000 and Received in final form 3 July 2000     

Role of surface States in scanning tunneling spectroscopy of (111) metal surfaces with Kondo adsorbates

A nearly free-electron model to describe scanning tunneling spectroscopy of (111) metal surfaces with Kondo impurities is presented. Surface states are found to play an important role giving a larger contribution to the conductance of Cu(111) and Au(111) than Ag(111) surfaces. The different line shapes observed when Co is adsorbed on the different substrates are mainly determined by the position of the surface band onset relative to the Fermi energy and the decay length of the surface state into the substrate. The lateral dependence of the line shape amplitude is found to be bulklike for R|| < or approximately 3-5 A and surfacelike at larger distances, in agreement with experimental data.     

Anisotropy of the optical and magneto-optical response of Au/Co/Au/Cu multilayers grown on vicinal Si (111) surfaces

The optical and magneto-optical second harmonic reflectivity response of Au/Co/Au/Cu multilayers grown on vicinal Si (111) substrates has been studied. These azimuthal optical non-linear experiments check the uniaxial character of the crystallinity of the Au buffer layer and the magnetic behavior of the ultrathin Co films in the metallic multilayer. They clearly show the strong dependence of the growth parameters and the misorientation of the vicinal surface on the SHG reflectivity signals. This uniaxial behavior is also correlated to linear MOKE experiments on the magnetic anisotropy with an easy magnetization axis parallel to the step edges. Received: 16 October 2001 / Published online: 29 May 2002     

Surface interactions of Au(I) cyclo-trimer with Au(111) and Al(111) surfaces: A computational study

A plane-wave density functional theory (DFT) study on surface interactions of a cyclo-[Au(μ-Pz)]₃ monolayer (denoted as T), Pz = pyrazolate, with Au(111) and Al(111) surfaces (denoted as M′) has been performed. Structural and electronic properties at the M′–T interfaces are determined from individually optimized structures of M′, T and M′–T. Results show that the gold pyrazolate trimer (T) binds more strongly on the Au(111) surface than on Al(111). Charge redistribution has been observed at both M′–T interfaces, where charge is “pushed” back towards the Au(111) surface from the trimer monolayer in Au(111)–T system, while the opposite happens in the Al(111)–T system where the charge is being pushed toward the trimer monolayer from the Al(111) surface. Considerable changes to the work function of Au(111) and Al(111) surfaces upon the trimer adsorption which arise from monolayer vacuum level shifts and dipole formation at the interfaces are calculated. The interaction between cyclo-[Au(μ-Pz)]₃ with metal surfaces causes band broadening of the gold pyrazolate trimer in M′–T systems. The present study aids better understanding of the role of intermolecular interactions, bond dipoles, energy-level alignment and electronic coupling at the interface of metal electrodes and organometallic semiconductor to help design metal–organic field effect transistors (MOFETs) and other organometallic electronic devices.     

Do methanethiol adsorbates on the Au(111) surface dissociate?

The interaction of methanethiol molecules CH3SH with the Au(111) surface is investigated, and it is found for the first time that the S-H bond remains intact when the methanethiol molecules are adsorbed on the regular Au(111) surface. However, it breaks if defects are present in the Au(111) surface. At low coverage, the fcc region is favored for S atom adsorption, but at saturated coverage the adsorption energies at various sites are almost isoenergetic. The presented calculations show that a methanethiol layer on the regular Au(111) surface does not dimerize.     

Adsorption of 5-halouracils on Au(111)

The immobilization of 5-halouracils on Au(111) has been studied by soft X-ray photoelectron spectroscopy (XPS) and near-edge X-ray absorption fine structure (NEXAFS) spectroscopy. Multilayer and monolayer films of 5-chlorouracil were deposited on the Au(111) surface by evaporation in vacuum while films of 5-bromouracil were absorbed in two modes: from the gas phase under ultrahigh vacuum conditions and from solution. The photoemission spectra of C, N and O 1s, Br 3d and Cl 2p as well as the absorption spectra at the N and O K-edges were measured for monolayers of 5-halouracil films and the nature of the bonding with the Au(111) surface has been determined. From the angular dependence of the NEXAFS spectra at the O and K-edges, we conclude that these 5-halouracils are lying nearly parallel to the Au(111) surface. Distinct chemical states and surface adsorption geometry of the 5-BrU molecules for monolayer coverage prepared in two different ways have been found.     

Gold-adatom-mediated bonding in self-assembled short-chain alkanethiolate species on the Au(111) surface

Microscopic evidence for Au-adatom-induced self-assembly of alkanethiolate species on the Au(111) surface is presented. Based on STM measurements and density-functional theory calculations, a new model for the low-coverage self-assembled monolayer of alkanethiolate on the Au(111) surface is developed, which involves the adsorbate complexes incorporating Au adatoms. It is also concluded that the Au(111) herringbone reconstruction is lifted by the alkanethiolate self-assembly because the reconstructed surface layer provides reactive Au adatoms that drive self-assembly.     

Au(111)表面吸附单个八乙基钴卟啉分子的电子态和输运性质调控

通过低温超高真空扫描隧道显微镜及其谱学方法研究并展示了分子配体在调控表面吸附的单个八乙基钴卟啉(CoOEP)分子的电子态和输运性质中的重要作用. 通过单分子剪裁可以脱去该分子外围的甲基, 并在中心钴原子的微分电导谱中观察测到d轨道共振到近藤共振的演变. 实验结果结合第一性原理的理论计算研究表明, 在脱去甲基前后中心钴原子的化学环境和磁矩均未发生显著变化, 这一演变可以通过一个简化模型来阐释并被归结为脱去甲基后分子配体与衬底成键改变了体系隧穿参数所导致. 此外, 实验结果表明CoOEP分子配体的输运性质可受到分子间距离和范德华相互作用的显著调控. 在CoOEP低聚体中位于分子之间的乙基被抬高, 同时在其微分电导谱谱中0–0.8 V区域内新出现一个强的共振峰. 这一新的共振峰表现出等间距的多峰细节, 其峰间距与卟啉环和乙基之间的C–C键伸缩模式能量符合. 这一新共振峰的出现被归结为由于分子局部与衬底耦合减弱形成双结隧穿体系所导致的振子态隧穿峰.     

Theoretical studies of ultrathin film-induced faceting on W(111) surfaces

We have used local volume (or EAM) potentials to study the pyramidal faceting (or reconstruction) of a W(111) surface induced by face center cubic (fcc) metals Pd, Pt, Au, and a body center cubic (bcc) metal Mo. We found that the surface-energy differences of (211) and (111) surfaces of bcc W increases as one or few monolayers of Pd, Pt, Au, and Mo films are deposited. We found that the lateral relaxation which is allowed on the (211) surface further increases the surface energy anisotropy as the thickness of the fcc metal film increases. Our calculated results are consistent with the argument that the surface energy anisotropy is the driving force for the faceting, but do not rule out three-dimensional (3D) island growth as another possible mechanism for the (211) faceting. We also found that there is a possible bilayer growth mode in W(211) surfaces with Pt and Pd films.     

Nanoscale probing of adsorbed species by tip-enhanced Raman spectroscopy

Tip-enhanced Raman spectroscopy (TERS) is based on the optical excitation of localized surface plasmons in the tip-substrate cavity, which provides a large but local field enhancement near the tip apex. We report on TERS with smooth single crystalline surfaces as substrates. The adsorbates were CN- ions at Au(111) and malachite green isothiocyanate (MGITC) molecules at Au(111) and Pt(110) using either Au or Ir tips. The data analysis yields Raman enhancements of about 4 x 10(5) for CN- and up to 10(6) for MGITC at Au(111) with a Au tip, probing an area of less than 100 nm radius.     

In situ resistivity and magnetoresistance studies of Co/Au(111) single layers and bilayers

We report here on resistance and magnetoresistance (MR) studies of ultrathin Co/Au(111) single sandwiches and bilayers with perpendicular magnetization. Resistance of the films was measured in situ in ultrahigh vacuum, during depositions and as a function of a perpendicular applied magnetic field. A large MR variation with the thickness of Au coverage was observed and compared to calculations. The coercive field of the Co films shows a drastic variation with the Au coverage thickness, which reflects the theoretical anisotropy variation. It was measured as a function of temperature. For the first time, the effect of interlayer interaction on the resistivity of a Co bilayer during the growth of Co top layer, is evidenced and compared to calculations. Finally, hysteresis loops of strongly antiferromagnetically coupled bilayers are investigated. Received 3 November 1998 and Received in final form 18 January 1999     

Coadsorption of gold with chlorine on CeO2 (111) surfaces: A first principles study

To investigate the effects of chlorine on the Au/ceria catalysts,the adsorption of gold or chlorine and their coadsorpiton on the stoichiometric and partially reduced CeO₂（111） surfaces are studied from the first principles.It is found that the adsorption of Au is significantly enhanced by the chlorine preadsorption on the stoichiometric CeO₂（111） surface;while on the partially reduced CeO₂（111） surface,the preadsorbed chlorine inhabits the oxygen vacancy（which is the preferred adsorption site for gold）,leading to a CeOCl phase and the dramatical weakening of the Au adsorption.Therefore,chlorine on the CeO₂（111） surface can affect the Au adsorption thus the activity of the Au/CeO₂ catalyst.     

The surface structures growth’s features caused by Ge adsorption on the Au(111) surface

The initial stage of the adsorption of Ge on an Au(111) surface was investigated. The growth and stability of the structures formed at the surface were studied by ultrahigh-vacuum low-temperature scanning tunneling microscopy and analyzed using density functional theory. It was established that the adsorption of single Ge atoms at the Au(111) surface at room temperature leads to the substitution of Au atoms by Ge atoms in the first surface layer. An increasing of surface coverage up to 0.2–0.4 monolayers results in the growth of an amorphous binary layer composed of intermixed Au and Ge atoms. It was shown that the annealing of the binary layer at a temperature of T _s ? 500 K, as well as the adsorption of Ge on the Au(111) surface heated to T _s ? 500 K for coverages up to 1 monolayer lead to a structural transition and the formation of an Au–Ge alloy at least in the first two surface layers. Based on experimental and theoretical data, it was shown that the formation of single-layer germanene on the Au(111) surface for coverages ≤1 monolayer in the temperature range of T _s = 297–500 K is impossible.     

Particle-in-a-box confinement of electron gases in and above the surface of self-organized Co nanowires at Au(111) step edges

We report on confinement of the series of two-dimensional (2D) electron gases provided by image-potential states (ISs) above wire-like Co nanoparticles that are formed at Au(111) step edges upon Co atom deposition. Maps of the local density of states recorded by means of scanning tunneling microscopy reveal the formation of standing wave (SW) patterns at the Co nanowire surface caused by effective scattering at its boundaries. Due to the simple rectangular shape of the wire-like Co nanoparticles, SW patterns, which reflect the eigenfunctions of the particles, are unambiguously resolved. Quantitative comparison to the confinement of Co surface state electrons reveals that the IS electrons follow a similar particle-in-a-box type behavior. These findings open new perspectives for investigation of quantum size effects of 2D electron systems above nanostructured surfaces.     

Understanding formation of molecular rotor array on Au(111) surface

The motion of single molecules on surfaces plays an important role in nanoscale engineering and bottom-up construction of complex devices at single molecular scale. In this article, we review the recent progress on single molecular rotors self-assembled on Au(111) surfaces. We focus on the motion of single phthalocyanine molecules on the reconstructed Au(111) surface based on the most recent results obtained by scanning tunneling microscopy (STM). An ordered array of single molecular rotors with large scale is self-assembled on Au(111) surface. Combined with first principle calculations, the mechanism of the surface-supported molecular rotor is investigated. Based on these results, phthalocyanine molecules on Au (111) are a promising candidate system for the development of adaptive molecular device structures.     

LEED study of the epitaxial growth of the thin film Au(111)/Ag(111) system

An analysis of LEED data from the Ag(111) surface at room temperature and 5° ? Θ ? 16°, φ = 12° has been carried out in order to test three different model potentials for the exchange and correlation part of the one-electron LEED potential. Clean Au(111) surfaces have been grown on Ag(111) at room temperature at a deposition rate of 0.15 Å s^?1. Similar method of calculation and potentials have been employed for the Au overlay er on Ag(111). After the deposition of ? 2.5 monolayers of Au/Ag(111) the growth of Au can proceed in two different ways. One of them matches satisfactorily with the theoretical calculation for the Au(111) overlayer on Ag(111) following the fcc sequence. The other seems to be concerned with the diffusion of Ag during the Au growth. Similar curves have been obtained during the diffusion of Ag through 350 Å of Au(111).     

High-temperature morphology of stepped gold surfaces

Molecular dynamics simulations with a classical many-body potential are used to study the high-temperature stability of stepped non-melting metal surfaces. We have studied in particular the Au(111) vicinal surfaces in the (M + 1,M− 1,M) family and the Au(100) vicinals in the (M,1,1) family. Some vicinal orientations close to the non-melting Au(111) surface become unstable close to the bulk melting temperature and facet into a mixture of crystalline (111) regions and localized surface-melted regions. On the contrary, we do not find high-temperature faceting for vicinals close to Au(100), also a non-melting surface. These (100) vicinal surfaces gradually disorder with disappearance of individual steps well below the bulk melting temperature. We have also studied the high-temperature stability of ledges formed by pairs of monatomic steps of opposite sign on the Au(111) surface. It is found that these ledges attract each other, so that several of them merge into one larger ledge, whose edge steps then act as a nucleation site for surface melting.     

Au(111)表面单个钴酞菁分子的去氢过程

利用低温超高真空扫描隧道显微镜对单个钴酞菁分子实现了选键化学反应.通过对吸附于Au(111)表面的单个钴酞菁分子外围H原子的"剪裁",并用实验图像和谱学方法,结合第一性原理理论计算研究了逐步去除钴酞菁分子8个外围H原子的过程.理论计算结果再现了实验中所观测到的分子空间构型的变化,并阐明了吸附体系中局域自旋的恢复和变化过程.