Preparation and applications of hybrid organic-inorganic monoliths: a review

This review presents an overview of the properties of hybrid organic-inorganic monolithic materials and summarizes the recent developments in the preparation and applications of these hybrid monolithic materials. Hybrid monolithic materials with porosities, surface functionalities, and fast dynamic transport have developed rapidly, and have been used in a wide range of applications owing to the low cost, good stability, and excellent performance. Basically, these materials can be divided into two major types according to the chemical composition: hybrid silica-based monolith (HSM) and hybrid polymer-based monolith (HPM). Compared to the HPM, HSM monolith has been attracting most wide attentions, and it is commonly synthesized by the sol-gel process. The conventional preparation procedures of two type's hybrid organic-inorganic monoliths are addressed. Applications of hybrid organic-inorganic monoliths in optical devices, capillary microextraction (CME), capillary electrochromatography (CEC), high performance liquid chromatography (HPLC), and chiral separation are also reviewed.     

Rational design,properties, and applications of biosurfactants: a short review of recent advances

Biosurfactants combine physicochemical properties with biological activities. Although biosurfactants are often expressed by microorganisms, an increasing amount is produced by chemical synthesis. As many exist in the form of homologous compounds, it is often difficult to purify biosurfactants. But this has not limited the efforts to develop their commercial applications. In this short review, we have featured the recent advances in three important types of biosurfactants, lipopeptides, nucleolipids, and glycolipids. We have focused on comparing some of the key properties and functionalities between modern synthetic versions and their corresponding natural counterparts. We end the review by outlining the needs for not only strengthening their basic structure–property relationships through further research but also developing better technologies, irrespective of direct chemical synthesis or biological synthesis of biosurfactants through constructions of genetically engineered strains, to help advance the commercial use of biosurfactants.     

Anodic oxidation of organic pollutants: Anode fabrication,process hybrid and environmental applications

This review summarizes the recent progress in anodic oxidation of organic pollutant for water and wastewater treatment. It supplies the advances in anodes fabrication to improve the anodic performance by different modifications and preparation strategies, focusing on non-active anodes including boron-doped diamond (BDD), PbO₂, SnO₂ and Ti-based anode (e.g., Ti₄O₇, blue titanium oxide). Meanwhile, the tendency of anodic oxidation coupled or combined with other processes (adsorption, membrane separation, biological treatment and advanced oxidation process) for pretreatment or advanced treatment of organic pollutant is presented. Finally, anodic oxidation for environmental application is briefly described; several challenges need to be overcome and perspectives for future study are critically proposed.     

Shortcut method for evaluation and design of a hybrid process for enantioseparations

Hybrid processes for enantioseparations have a considerable potential for reducing investment and operational costs. An example is the combination of simulated moving bed (SMB) chromatography and selective crystallisation. However, the design of integrated processes is a difficult task. A shortcut method is presented that can serve as a tool for design and estimation of the potential of such processes. The approach requires only limited experimental data and thus allows for systematic parameter studies. The method is based on the determination of the purity-performance characteristic of the SMB process and rigorous application of mass balances. The use of relative mass fluxes allows derivation of simple algebraic expressions for essential process parameters. The significant potential of combining SMB and crystallisation is demonstrated for the example of the separation of mandelic acid enantiomers.     

SERS as a bioassay platform: fundamentals, design, and applications

Bioanalytical science is experiencing a period of unprecedented growth. Drivers behind this growth include the need to detect markers central to human and veterinary diagnostics at ever-lower levels and greater speeds. A set of parallel arguments applies to pathogens with respect to bioterrorism prevention and food and water safety. This tutorial review outlines our recent explorations on the use of surface enhanced Raman scattering (SERS) for detection of proteins, viruses, and microorganisms in heterogeneous immunoassays. It will detail the design and fabrication of the assay platform, including the capture substrate and nanoparticle-based labels. The latter, which is the cornerstone of our strategy, relies on the construction of gold nanoparticles modified with both an intrinsically strong Raman scatterer and an antibody. This labelling motif, referred to as extrinsic Raman labels (ERLs), takes advantage of the well-established signal enhancement of scatterers when coated on nanometre-sized gold particles, whereas the antibody imparts antigenic specificity. We will also examine the role of plasmon coupling between the ERLs and capture substrate, and challenges related to particle stability, nonspecific adsorption, and assay speed.     

Principles,methodologies, and applications of photon activation analysis: a review

This review describes the basic principles of photon activation analysis (PAA) and gives an extensive overview of its numerous applications. Uses of PAA for environmental, biological, geological, archeological, and forensic samples are reviewed. Both scientific and industrial applications of PAA are covered. Potential future uses of PAA are addressed.     

Integrated nanoparticle-biomolecule hybrid systems: synthesis, properties, and applications

Nanomaterials, such as metal or semiconductor nanoparticles and nanorods, exhibit similar dimensions to those of biomolecules, such as proteins (enzymes, antigens, antibodies) or DNA. The integration of nanoparticles, which exhibit unique electronic, photonic, and catalytic properties, with biomaterials, which display unique recognition, catalytic, and inhibition properties, yields novel hybrid nanobiomaterials of synergetic properties and functions. This review describes recent advances in the synthesis of biomolecule-nanoparticle/nanorod hybrid systems and the application of such assemblies in the generation of 2D and 3D ordered structures in solutions and on surfaces. Particular emphasis is directed to the use of biomolecule-nanoparticle (metallic or semiconductive) assemblies for bioanalytical applications and for the fabrication of bioelectronic devices.     

Stability and adsorption properties of electrostatic complexes: design of hybrid nanostructures for coating applications

We report the presence of a correlation between the bulk and interfacial properties of electrostatic coacervate complexes. Complexes were obtained by co-assembly between cationic-neutral diblocks and oppositely charged surfactant micelles or 7 nm cerium oxide nanoparticles. Light scattering and reflectometry measurements revealed that the hybrid nanoparticle aggregates were more stable through both dilution and rinsing (from either a polystyrene or a silica surface) than their surfactant counterparts. These findings were attributed to a marked difference in critical association concentration between the two systems and to the frozen state of the hybrid structures.     

Silatranes: a review on their synthesis, structure, reactivity and applications

This critical review summarizes progress of the rapidly developing and very active field of silatrane chemistry. The first part of the review deals with general synthetic approaches used to synthesize different silatranes. The most interesting feature of silatranes, i.e., variation of Si-N bond length on the basis of the axial substituent of Si, and other structural features, are described in the second part with special emphasis on crystallographic and theoretical studies. It is followed by a discussion on the reactivity of various silatranes. Silatranes have now gained acceptance for a wide variety of applications which are summarized in the last section of review. Some of them have extensive interest due to their medical use to heal wounds or stimulate hair-growth (pilotropic activity), biological properties, pharmacological properties e.g. antitumor, anticancer, antibacterial, anti-inflammatory, fungicidal activity, stimulating effect in animal production and seed germination effects. The review focuses on the extended potential of silatranes in sol-gel processes, mesoporous zeotypes, atomic force microscopy, commercial products such as adhesion promoters, polymer formation and rubber compositions. This critical review will be helpful for general researchers, experts, advanced undergraduates and newcomers working on silatrane chemistry as this review presents greater emphasis on synthesis and characterization, structural properties, reactivity and applications of silatranes in the field of biology, material science, sol-gel chemistry, pharmaceutics, agriculture and medicine (311 references).     

Chemometric experimental design based optimization techniques in capillary electrophoresis: a critical review of modern applications

A critical review of recent developments in the use of chemometric experimental design based optimization techniques in capillary electrophoresis applications is presented. Current advances have led to enhanced separation capabilities of a wide range of analytes in such areas as biological, environmental, food technology, pharmaceutical, and medical analysis. Significant developments in design, detection methodology and applications from the last 5 years (2002–2007) are reported. Furthermore, future perspectives in the use of chemometric methodology in capillary electrophoresis are considered.     

High-strength hydrogels: Microstructure design,characterization and applications

Hydrogels are a class of polymeric network materials embedded in a water-rich environment. They are widely applied in drug delivery, actuator, and sensor. However, conventional hydrogels encountered limits from their poor mechanical property. Recent researches in hydrogels have been focusing on mechanical enhancement, ranging from design of microstructures to adjustment of compositions in hydrogels. Here, the design and fabrication strategies of high-strength hydrogels, as well as major progress in their typical strength-support applications are systemically reviewed. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 1325–1335     

Biosensing applications of clay-modified electrodes: a review

Two-dimensional layered inorganic solids, such as cationic clays and layered double hydroxides (LDHs), also defined as anionic clays, have open structures which are favourable for interactions with enzymes and which intercalate redox mediators. This review aims to show the interest in clays and LDHs as suitable host matrices likely to immobilize enzymes onto electrode surfaces for biosensing applications. It is meant to provide an overview of the various types of electrochemical biosensors that have been developed with these 2D layered materials, along with significant advances over the last several years. The different biosensor configurations and their specific transduction procedures are discussed.      

Session 4 process economics and commercialization

Applied Biochemistry and Biotechnology -     

2D inorganic nanosheet-based hybrid photocatalysts: Design,applications, and perspectives

Highly anisotropic 2D nanosheets of inorganic solids with nanometer-level thickness attract a great deal of research activity because of their unique merits in exploring novel high performance photocatalysts applicable for environmental purification and production of renewable clean energy. The 2D inorganic nanosheets possess many valuable properties such as tailorable band structures and chemical compositions, large surface areas, well-defined defect-free surface structure, and tunable electrical conductivities. Due to these unique advantages of 2D inorganic nanosheets, these materials can be used as promising building blocks for hybrid-type photocatalysts with optimized band structures, expanded surface areas, improved charge separation behaviors, and enhanced reaction kinetics. Of prime importance is that unusually strong electronic coupling can occur between very thin 2D inorganic nanosheets and hybridized nanospecies, leading to the synergistic optimization of electronic and optical properties, and thus the remarkable enhancement of photocatalytic activity. Depending on the type of component nanosheets, diverse examples of inorganic nanosheet-based photocatalysts are presented along with the in-depth discussion about critical roles of inorganic nanosheet in these hybrid photocatalysts. Future perspectives in the researches for 2D inorganic nanosheet-based photocatalysts are discussed to offer useful directions for designing and synthesizing novel high performance photocatalysts applicable for renewable energy production and environmental purification.     

Double-lanthanide-binding tags: design, photophysical properties, and NMR applications

Lanthanide-binding tags (LBTs) are peptide sequences of up to 20 encoded amino acids that tightly and selectively complex lanthanide ions and can sensitize terbium (Tb3+) luminescence. On the basis of these properties, it was predicted that increasing the number of bound lanthanides would improve the capabilities of these tags. Therefore, using a structurally well-characterized single-LBT sequence as a starting point, a "double-LBT" (dLBT), which concatenates two lanthanide-binding motifs, was designed. Herein we report the generation of dLBT peptides and luminescence and NMR studies on a dLBT-tagged ubiquitin fusion protein. These lanthanide-bound constructs are shown to be improved luminescent tags with avid lanthanide binding and up to 3-fold greater luminescence intensity. NMR experiments were conducted on the ubiquitin construct, wherein bound paramagnetic lanthanides were used as alignment-inducing agents to gain residual dipolar couplings, which are valuable restraints for macromolecular structure determination. Together, these results indicate that dLBTs will be valuable chemical tools for biophysical applications leading to new approaches for studying the structure, function, and dynamics of proteins.     

Materials and biological applications of 1,2,3-selenadiazoles: a review

In recent years, chemistry of metal-nitrogen–bonded compounds have attracted tremendous attention mainly because of unusual properties resulting from such a bond involving carbon and other heteroatoms. M?N–bonded compounds, when containing group VI elements, especially selenium, has attracted great attention in materials chemistry. In addition, the increased interest in synthesis of N-containing bioactive compounds with other heteroatoms such as selenium, sulfur, etc is mainly because of their tremendous potential as antioxidants, additives, dyes for polymers, and as insecticides, in solvent extraction, and in nanotechnology. Thus, the synthesis and applications of 1,2,3-selenadiazoles have attracted recent interest of materials scientists, including nanotechnologists, pharmaceutical chemists, and organic chemists. The chemistry of 1,2,3-selenadiazoles is highly rich and has been practiced ever since its first report in 1972. Such N-containing Se-heterocycles form several types of selenadiazoles that are a rich source of selenium for semiconductor nanoparticles of metal selenides. The materials chemistry of such molecules has been documented for over three decades, and their great scope in semiconductors has emerged. This review article is an attempt to bring a variety of materials and biological application of 1,2,3-selenadiazoles for better understanding of the researchers.     

RheoDSC: design and validation of a new hybrid measurement technique

A newly developed hyphenated technique is presented that combines an existing rheometer and differential scanning calorimeter (DSC) into a single experimental setup. Through the development of a fixation accessory inside the cell of the calorimeter and the introduction of an add-on unit for the rheometer, the simultaneous calorimetric and rheological measurement inside the well-controlled thermal environment of a Tzero™ DSC cell opens new experimental possibilities. The evolution of thermal and flow properties of a material can be simultaneously monitored during steady or oscillatory shear flow and regular or modulated temperature DSC measurements. The technique offers interesting opportunities for the investigation of flow-induced transitions, such as crystallization or phase separation, and provides a possibility for high-throughput screening of materials. The signal quality of the novel technique in comparison to the stand-alone techniques is demonstrated by the evaluation of the calibration factors and by measurements on standard materials. Finally, combined rheological and calorimetric melting and crystallization experiments on polycaprolacton are performed.     

Peroxidase-mimicking DNAzymes for biosensing applications: a review

DNAzymes are single stranded DNA molecules that exhibit catalytic activity and are exploited in medicine, biology and material sciences. Development in this area is related to the many advantages of DNAzymes over conventional protein enzymes, such as thermal stability and simpler preparation. DNAzymes with peroxidase-like activity have recently attracted great interest. To assure such catalytic activity, oligonucleotides have to adopt a G-quadruplex structure, which can bind the hemin molecule. This system facilitates a redox reaction between the target molecule and hydrogen peroxide, which results in the appearance of an oxidized target molecule (product). DNAzymes with peroxidase-mimicking activity have great potential in bioanalytical chemistry. This review presents fundamentals concerning the design and engineering of DNAzymes with peroxidase-like activity, describes their properties and spectral characteristics and shows how DNAzymes can contribute to bioanalytical research. Examples of bioanalytical applications of DNAzymes with peroxidase-like activity include nucleic acid probes with DNAzyme labels for the detection of specific DNA sequences in colorimetric or chemiluminescent assays. Assays for telomerase or methyltransferase activity, which are potential targets in anticancer therapy, are also described in this review. Other applications include the determination of metal cations such as Ag(+), K(+), Hg(2+), Pb(2+) or Cu(2+) and amplified detection of small molecules such as adenosine, cocaine or AMP and proteins such as lysozyme or thrombin. In the last decade, DNAzymes have become part of numerous applications in many areas of science from chemistry to biology to medicine.