Demonstration of 640 × 512 pixels long-wavelength infrared (LWIR) quantum dot infrared photodetector (QDIP) imaging focal plane array

We have exploited the artificial atom-like properties of epitaxially grown self-assembled quantum dots (QDs) for the development of high operating temperature long wavelength infrared (LWIR) focal plane arrays (FPAs). QD infrared photodetectors (QDIPs) are expected to outperform quantum well infrared detectors (QWIPs) and are expected to offer significant advantages over II–VI material based FPAs. We have used molecular beam epitaxy (MBE) technology to grow multi-layer LWIR dot-in-a-well (DWELL) structures based on the InAs/InGaAs/GaAs material system. This hybrid quantum dot/quantum well device offers additional control in wavelength tuning via control of dot-size and/or quantum well sizes. DWELL QDIPs were also experimentally shown to absorb both 45° and normally incident light. Thus we have employed a reflection grating structure to further enhance the quantum efficiency. The most recent devices exhibit peak responsivity out to 8.1 μm. Peak detectivity of the 8.1 μm devices has reached 1 × 10¹⁰ Jones at 77 K. Furthermore, we have fabricated the first long-wavelength 640 × 512 pixels QDIP imaging FPA. This QDIP FPA has produced excellent infrared imagery with noise equivalent temperature difference of 40 mK at 60 K operating temperature.     

Band structure and impurity effects on optical properties of quantum well and quantum dot infrared photodetectors

We examined theoretically band structure and discrete dopant effects in the quantum well infrared photodetector (QWIP) and the quantum dot infrared photodetector (QDIP). We find that in QWIPs discrete dopant effects can induce long wavelength infrared absorption through impurity assisted intra-subband optical transitions. In QDIPs, we find that a strategically placed dopant atom in a quantum dot can easily destroy the symmetry and modify the selection rule. This mechanism could be partially responsible for normal incidence absorption observed in low-aspect-ratio quantum dots.     

Characteristics and developments of quantum-dot infrared photodetectors

Quantum dots infrared photodetectors (QDIPs) theoretically have several advantages compared with quantum wells infrared photodetectors (QWIPs). In this paper, we discuss the theoretical advantages of QDIPs including the normal incidence response, lower dark current, higher responsivity and detectivity, etc. Recent device fabrication and experiment results in this field are also presented. Based on the analysis of existing problems, some approaches that would improve the capability of the device are pointed out.     

Comparison studies of infrared photodetectors with a quantum-dot and a quantum-wire base

This paper mainly presents a theoretical analysis for the characteristics of quantum dot infrared photodetectors (QDIPs) and quantum wire infrared photodetectors (QRIPs). The paper introduces a unique mathematical model of solving Poisson’s equations with the usage of Lambert W functions for infrared detectors’ structures based on quantum effects. Even though QRIPs and QDIPs have been the subject of extensive researches and development during the past decade, it is still essential to implement theoretical models allowing to estimate the ultimate performance of those detectors such as photocurrent and its figure-of-merit detectivity vs. various parameter conditions such as applied voltage, number of quantum wire layers, quantum dot layers, lateral characteristic size, doping density, operation temperature, and structural parameters of the quantum dots (QDs), and quantum wires (QRs). A comparison is made between the computed results of the implemented models and fine agreements are observed. It is concluded from the obtained results that the total detectivity of QDIPs can be significantly lower than that in the QRIPs and main features of the QRIPs such as large gap between the induced photocurrent and dark current of QRIP which allows for overcoming the problems in the QDIPs. This confirms what is evaluated before in the literature. It is evident that by increasing the QD/QR absorption volume in QDIPs/QRIPs as well as by separating the dark current and photocurrents, the specific detectivity can be improved and consequently the devices can operate at higher temperatures. It is an interesting result and it may be benefit to the development of QDIP and QRIP for infrared sensing applications.     

Characteristics analysis of quantum wire infrared photodetectors under both dark and illumination conditions

This paper presents a theoretical analysis for the characteristics of quantum wire infrared photodetectors (QRIPs). Mathematical model describing this device is introduced. Maple 4 software is used to device this model. The developed model is used to investigate the behavior of the device with different values of performance parameters such as number of quantum wire layers, lateral characteristic size, and temperature. The modeling results are validated against experimental published work and full agreements are obtained. Several performance parameters are tuned to enhance the performance of these quantum photodetectors through the presented modeling. The resultant performance characteristics and comparison among both quantum well infrared photodetectors (QWIPs) and QRIPs are presented in this work. From the obtained results we notice that the total dark current in the QRIPs can be significantly lower than that in the QWIPs. Moreover, main features of the QRIPs such as the large gap between the induced photocurrent and dark current open the way for overcoming the problems of quantum dot infrared photodetectors (QDIPs).     

New material systems for third generation infrared photodetectors

Third-generation infrared (IR) systems are being developed nowadays. In the common understanding, these systems provide enhanced capabilities-like larger numbers of pixels, higher frame rates, and better thermal resolution as well as multicolour functionality and other on-chip functions. In this class of detectors, two main competitors, HgCdTe photodiodes and quantum-well photoconductors, have being developed. Recently, two new material systems have been emerged as the candidates for third generation IR detectors, type II InAs/GaInSb strain layer superlattices (SLSs) and quantum dot IR photodetectors (QDIPs). In the paper, issue associated with the development and exploitation of multispectral photodetectors from these new materials is discussed. Discussions is focused on most recently on-going detector technology efforts in fabrication both photodetectors and focal plane arrays (FPAs). The challenges facing multicolour devices concerning complicated device structures, multilayer material growth, and device fabrication are described.     

Near‐room‐temperature photon‐noise‐limited quantum well infrared photodetector

With the modern development of infrared laser sources such as broadly tunable quantum cascade lasers and frequency combs, applications of infrared laser spectroscopy are expected to become widespread. Consequently, convenient infrared detectors are needed, having properties such as fast response, high efficiency, and room‐temperature operation. This work investigated conditions to achieve near‐room‐temperature photon‐noise‐limited performance of quantum well infrared photodetectors (QWIPs), in particular the laser power requirement. Both model simulation and experimental verification were carried out. At 300 K, it is shown that the ideal performance can be reached for typical QWIP designs up to a detection wavelength of 10 µm. At 250 K, which is easily reachable with a thermoelectric Peltier cooler, the ideal performance can be reached up to 12 µm. QWIPs are therefore suitable for detection and sensing applications with devices operating up to or near room temperature.     

Development of a 1K × 1K, 8–12 μm QWIP array

In the on-going evolution of GaAs quantum well infrared photodetectors (QWIPs) we have developed a 1,024 × 1,024 (1K × 1K), 8–12  μm infrared focal plane array (FPA). This 1 megapixel detector array is a hybrid using an L3/Cincinnati Electronics silicon readout integrated circuit (ROIC) bump bonded to a GaAs QWIP array fabricated jointly by engineers at the Goddard Space Flight Center (GSFC) and the Army Research Laboratory (ARL). We have integrated the 1K × 1K array into an SE-IR based imaging camera system and performed tests over the 50–80 K temperature range achieving BLIP performance at an operating temperature of 57 K. The GaAs array is relatively easy to fabricate once the superlattice structure of the quantum wells has been defined and grown. The overall arrays costs are currently dominated by the costs associated with the silicon readout since the GaAs array fabrication is based on high yield, well-established GaAs processing capabilities. One of the advantages of GaAs QWIP technology is the ability to fabricate arrays in a fashion similar to and compatible with silicon IC technology. The designer’s ability to easily select the spectral response of the material from 3 μm to beyond 15 μm is the result of the success of band-gap engineering and the Army Research Lab is a leader in this area. In this paper we will present the first results of our 1K × 1K QWIP array development including fabrication methodology, test data and imaging capabilities.     

Detectivity dependence of quantum dot infrared photodetectors on temperature

The detectivity of Quantum dot infrared photodetectors (QDIPs) has always attracted a lot attention as a very important performance parameter. In the paper, based on the theoretical model for the detectivity with the consideration of the common influence of the microscale electron transport, the nanoscale electron transport and the self-consistent potential distribution of the electrons, the dependence of the detectivity of the QDIP on temperature is discussed by analyzing the influence of the temperature on the average electrons number in a quantum dot. Specifically, the average electrons number in a quantum dot shows different change trends (from the increase to decrease) with the increase of the temperature, but the detectivity presents the single decrease trend with the temperature, which can provide the designers with the theoretical guidance for the performance optimization of the QDIP devices.     

Assessment of HgCdTe photodiodes and quantum well infrared photoconductors for long wavelength focal plane arrays

Recent trends in infrared detectors are towards large, electronically addressed two-dimensional arrays. In the long wavelength infrared (LWIR) spectral range HgCdTe focal plane arrays (FPAs) occupy a dominant position. However, the slow progress in the development of large LWIR photovoltaic HgCdTe infrared imaging arrays and the rapid achievements of novel semiconductor heterostructure systems have made it necessary to foresee the future development of different material technologies in fabrication large FPAs. Among the competing technologies in LWIR are the quantum well infrared photoconductors (QWIPs) based on lattice matched GaAs/AlGaAs and strained layer InGaAs/AlGaAs material systems. This paper compares the technical merits of two IR detector arrays technologies; photovoltaic HgCdTe and QWIPs. It is clearly shown that LWIR QWIP cannot compete with HgCdTe photodiode as the single device especially at higher temperature operation (>70 K) due to fundamental limitations associated with intersubband transitions. However, the advantage of HgCdTe is less distinct in temperature range below 50 K due to problems involved in HgCdTe material (p-type doping, Shockley–Read recombination, trap-assisted tunnelling, surface and interface instabilities). Even though the QWIP is a photoconductor, several of its properties such as high impedance, fast response time, long integration time, and low power consumption, well satisfy the requirements of fabrication of large FPAs. Due to the high material quality at low temperature, QWIP has potential advantages over HgCdTe for very LWIR (VLWIR) FPA applications in terms of the array size, uniformity, yield and cost of the systems.     

Performance investigations of quantum dot infrared photodetectors

Quantum dot infrared photodetectors (QDIPs) have already attracted more and more attention in recent years due to a high photoconductive gain, a low dark current and an increased operating temperature. In the paper, a device model for the QDIP is proposed. It is assumed that the total electron transport and the self-consistent potential distribution under the dark conditions determine the dark current calculation of QDIP devices in this model. The model can be used for calculating the dark current, the photocurrent and the detectivity of QDIP devices, and these calculated results show a good agreement with the published results, which illustrate the validity of the device model.     

Demonstration of large format mid-wavelength infrared focal plane arrays based on superlattice and BIRD detector structures

We have demonstrated the use of bulk antimonide based materials and type-II antimonide based superlattices in the development of large area mid-wavelength infrared (MWIR) focal plane arrays (FPAs). Barrier infrared photodetectors (BIRDs) and superlattice-based infrared photodetectors are expected to outperform traditional III–V MWIR and LWIR imaging technologies and are expected to offer significant advantages over II–VI material based FPAs. We have used molecular beam epitaxy (MBE) technology to grow InAs/GaSb superlattice pin photodiodes and bulk InAsSb structures on GaSb substrates. The coupled quantum well superlattice device offers additional control in wavelength tuning via quantum well sizes and interface composition, while the BIRD structure allows for device fabrication without additional passivation. As a demonstration of the large area imaging capabilities of this technology, we have fabricated mid-wavelength 1024 × 1024 pixels superlattice imaging FPAs and 640 × 512 MWIR arrays based on the BIRD concept. These initial FPA have produced excellent infrared imagery.     

量子点红外探测器的特性与研究进展

半导体材料红外探测器的研究一直吸引人们非常广泛的兴趣．以量子点作为有源区的红外探测器从理论上比传统量子阱红外探测器具有更大的优势．文章讨论了量子点红外探测器几个重要的优点，包括垂直入射光响应、高光电导增益、更低的暗电流、更高的响应率和探测率，等等．此外，报道了量子点红外探测器研究中一些最新的实验结果．在此基础上，分析了现存问题，并提出了进一步提高器件性能的几种可能途径．     

Performance improvement of quantum dot infrared photodetectors through modeling

This paper presents a method to evaluate and improve the performance of quantum dot infrared photodetectors (QDIPs). We proposed a device model for QDIPs. The developed model accounts for the self-consistent potential distribution, features of the electron capture and transport in realistic QDIPs in dark and illumination conditions. This model taking the effect of donor charges on the spatial distribution of the electric potential in the QDIP active region. The model is used for the calculation of the dark current, photocurrent and detectivity as a function of the structural parameters such as applied voltage, doping QD density, QD layers, and temperature. It explains strong sensitivity of dark current to the density of QDs and the doping level of the active region. In order to confirm our models and their validity on the practical applications, a comparison between the results obtained by proposed models and that experimentally published are conducted and full agreement is observed. Results show the effectiveness of methodology introduced.     

Comparative study between different quantum infrared photodetectors

This paper presents a theoretical analysis for the dark current characteristics of different quantum infrared photodetectors. These quantum photodetectors are quantum dot infrared photodetectors (QDIP), quantum wire infrared photodetectors (QRIP), and quantum well infrared photodetectors (QWIP). Mathematical models describing these devices are introduced. The developed models accounts for the self-consistent potential distribution. These models are taking the effect of donor charges on the spatial distribution of the electric potential in the active region. The developed model is used to investigate the behavior of dark current with different values of performance parameters such as applied voltage, number of quantum wire (QR) layers, QD layers, lateral characteristic size, doping quantum wire density and temperature. It explains strong sensitivity of dark current to the density of QDs/QRs and the doping level of the active region. In order to confirm our models and their validity on the practical applications, a comparison between the results obtained by proposed models and that experimentally published are conducted and full agreement is observed. Several performance parameters are tuned to enhance the performance of these quantum photodetectors through the presented modeling. The resultant performance characteristics and comparison among them are presented in this work. From the obtained results we notice that the total dark current in the QRIPs can be significantly lower than that in the QWIPs. Moreover, main features of the QRIPs such as the large gap between the induced photocurrent and dark current open the way for overcoming the problems of quantum dot infrared photodetectors.     

Towards dualband megapixel QWIP focal plane arrays

Mid-wavelength infrared (MWIR) and long-wavelength infrared (LWIR) 1024 × 1024 pixel quantum well infrared photodetector (QWIP) focal planes have been demonstrated with excellent imaging performance. The MWIR QWIP detector array has demonstrated a noise equivalent differential temperature (NEΔT) of 17 mK at a 95 K operating temperature with f/2.5 optics at 300 K background and the LWIR detector array has demonstrated a NEΔT of 13 mK at a 70 K operating temperature with the same optical and background conditions as the MWIR detector array after the subtraction of system noise. Both MWIR and LWIR focal planes have shown background limited performance (BLIP) at 90 K and 70 K operating temperatures respectively, with similar optical and background conditions. In addition, we have demonstrated MWIR and LWIR pixel co-registered simultaneously readable dualband QWIP focal plane arrays. In this paper, we will discuss the performance in terms of quantum efficiency, NEΔT, uniformity, operability, and modulation transfer functions of the 1024 × 1024 pixel arrays and the progress of dualband QWIP focal plane array development work.     

Dots,QWISPs, and BIRDs

We report work on several quantum structure based infrared detectors. We describe the concept of the submonolayer quantum dot based infrared photodetectors, report device results, and present imaging results from a megapixel focal plane array. We describe the concept and experimental progress of the quantum well intra-subband photodetector (QWISP), which is closely related to the quantum well infrared photodetector (QWIP), but uses the dopant-assisted intra-subband absorption mechanism in quantum wells for normal-incidence far infrared/terahertz radiation detection. We discuss aspects of superlattice heterostructure based barrier infrared detectors (BIRDs).     

Spectral tuning of InGaAs/GaAs quantum dot infrared photodetectors with bandpass guided‐mode resonance filters

Quantum dot infrared photodetectors can be coupled with micro‐structured filters to create narrowband sensors. Guided‐mode resonance filters based on a high‐index dielectric slab can exhibit bandpass characteristics that are suitable for monolithic integration with focal‐plane arrays. Here, patterned Ge filters were integrated with InGaAs/GaAs quantum dot detectors to linearly tune their 77 K photoresponse peaks from 5.6 µm to 6.2 µm. The dark current was not influenced by these filters but the ability to narrow the photoresponse linewidth was limited by substrate scattering, which is often encountered with front‐side illumination architectures. (© 2014 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Investigation of the quantum dot infrared photodetectors dark current

Quantum dot infrared photodetectors (QDIPs) are more efficient than other types of semiconductor based photodetectors; so it has become an actively developed field of research. In this paper quantum dot infrared photodetector dark current is evaluated theoretically. This evaluation is based on the model that was developed by Ryzhii et al. Here it is assumed that both thermionic emission and field-assisted tunneling mechanisms determine the dark current of QDIPs; moreover we have considered Richardson effect, which has not been taken into account in previous research. Then a new formula for estimating average number of electrons in a quantum dot infrared photodetector is derived. Considering the Richardson effect and field-assisted tunneling mechanisms in the dark current improves the accuracy of algorithm and causes the theoretical data to fit better in the experiment. The QDIPs dark current temperature and biasing voltage dependency, contribution of thermionic emission and field-assisted tunneling at various temperatures and biasing voltage in the QDIPs dark current are investigated. Moreover, the other parameter effects like quantum dot (QD) density and QD size effect on the QDIPs dark current are investigated.