The poly(ethylene oxide) (PEO) was introduced by the cross-linking method in the commercial Matrimid 5218. The two kinds of membranes were prepared from the Matrimid 5218 and the cross-linkers poly(propylene glycol) block poly(ethylene glycol) block poly(propylene glycol) diamine (PPG/PEG/PPGDA) with different molecular weights. The cross-linking reaction process was monitored by FTIR. The cross-linked Matrimid 5218 membranes display excellent CO2 permeability and CO2/light gas selectivity. The effects of cross-linkers with different molecular weights on gel content, thermal properties and H2, CO2, N2 and CH4 gas transport properties were reported. The effect of temperature on gas transport properties was also reported, and the permeabilities of these materials as a function of temperature were compared with other gas membrane materials. 相似文献
Thermodynamic interaction parameters of water-soluble poly[2-(dimethylamino)ethyl methacrylate] (DMA) and poly[2-(N-morpholino)ethyl methacrylate] (MEMA) homopolymers and their diblock copolymer (DMA–MEMA) were investigated at the temperatures above their glass-transition temperatures (Tg) by inverse gas chromatography (IGC) method. Sorption thermodynamic parameters of some aliphatic, alicyclic and aromatic hydrocarbons, weight fraction activity coefficients, Flory–Huggins interaction parameters, and solubility parameters for hydrocarbons and polymers were calculated. It was observed that sorption thermodynamic parameters on (co)polymers depend on the molecular structures of hydrocarbons. Evaluating both the calculated values of the weight fraction activity coefficients and Flory–Huggins interaction parameters, the solving ability of the hydrocarbons for DMA, MEMA homopolymers, and DMA–MEMA diblock copolymer decreased in the following sequence: Aromatic > alicyclic > aliphatic hydrocarbons. 相似文献
Conventional free-radical and RAFT copolymerization of poly(ethylene oxide) substituent containing methacrylate macromonomers, PEO5MEMA and PEO45MEMA, was studied by the use of 1H NMR spectroscopy for an analysis of residual monomers. From the monomer consumption curves, several parameters including monomer conversion, instantaneous copolymer composition and reactivity ratios of the monomers were evaluated. Reactivity ratios of PEO5MEMA and MAA estimated by non-linear approach of error-in-variables model and presented as joint confidence regions were constant during conventional free-radical and RAFT copolymerizations of the above monomers but were slightly affected by the RAFT process. Reactivity ratio of PEO45MEMA was found to be lower than that of PEO5MEMA and varied during copolymerization: increased with conversion in conventional free-radical copolymerization and slightly (without confidence) decreased in the RAFT process. RAFT copolymerization of PEO45MEMA and MAA enabled to synthesize comb copolymers with low composition distribution and more homogeneous distribution of PEO side chains along the mainchain. Under copolymerization with MAA, PEO45MEMA behaved like typical macromonomer with appropriate steric hindrance while the behavior of PEO5MEMA was similar to that of a low-molecular methacrylate. 相似文献
The blend membranes of polystyrene-block-polyisoprene-block-polystyrene and polyethylene-block-poly(ethylene glycol)-block-polycaprolactone were designed using the phase inversion technique. The poly(methyl methacrylate)-coated gold nanoparticles are around 40–50 nm in size. The honeycomb-shaped nanopores were uniformly dispersed in polystyrene-block-polyisoprene-block-polystyrene/polyethylene-block-poly(ethylene glycol)-block-polycaprolactone/poly(methyl methacrylate)-coated gold nanoparticles blend membranes. There was a 16% increase in tensile strength and a 33% increase in tensile modulus of polystyrene-block-polyisoprene-block-polystyrene/polyethylene-block-poly(ethylene glycol)-block-polycaprolactone/poly(methyl methacrylate)-coated gold nanoparticles 1 relative to the neat membrane. With 1 wt% nanoparticles, the membrane showed a higher water flux of 59.2 mL cm?2 min?1 and a salt rejection ratio of 25.4%, while the polystyrene-block-polyisoprene-block-polystyrene/polyethylene-block-poly(ethylene glycol)-block-polycaprolactone membrane without poly(methyl methacrylate)-coated gold nanoparticles had lower flux (43.8 mL cm?2 min?1) and salt rejection (18.5%). 相似文献
Abstract Copolymers of methacryl‐N,N′‐diisopropylurea (MA‐DiPrU) with ethylene glycol dimethacrylate (EDMA) at monomer‐to‐monomer ratios in the feed: 0.3/0.7; 0.5/0.5; 0.7/0.3; 0.8/0.2 were prepared in butanone in the presence of 2% of dibenzoyl peroxide (Bz2O2) at 70°C for 48?hr. Copolymers regardless of the ratio of comonomers in the feed decompose thermally at 200–250°C under the separation of isopropylisocyanate (iPrNCO). Residues after the removal of iPrNCO are thermally stable nanoporous crosslinked copolymers of methacryl‐isopropylamide (MA‐iPrA) with EDMA which decompose by a one‐step mechanism between 280°C and 450°C. Nonporous model copolymers poly(MA‐iPrA‐co‐EDMA) of similar composition, prepared by copolymerization of MA‐iPrA with EDMA, also decomposed by a one‐step mechanism as shown by TGA measurements. 相似文献
The crystallization process of poly(ethylene oxide) (PEO)/poly(methyl methacrylate) (PMMA)and PEO/poly(vinyl acetate) (PVAc) blends has been characterized by Fourier Transform Infrared(FTIR) spectra in conjunction with Differential Scanning Calorimeter (DSC) measurements. Thecrystallinity of PEO varies consistently with PEO content in PEO/PVAc blends and the PEO/PMMAblends containing 50 wt% or less PMMA. For the PEO/PMMA blends containing 60 wt% ormore PMMA, the crystallinity of PEO decreases more than PEO content but develops with crystal-lization time. These results can be explained in terms of difference between the crystallization tem-perature (T_c) and glass transition temperature (T_g) of the blends as a function of content of amorphouscomponent. 相似文献
The aim of this study was to synthesize and characterize a novel biocompatible polymeric membrane system and demonstrate its potential use in various biomedical applications. Synthetic hydrogels based on poly(hydroxyethyl methacrylate), poly(HEMA), have been widely studied and used in biomedical fields. A novel copolymer hydrogel was prepared in the membrane form using 2-hydroxyethyl methacrylate monomer (HEMA) and a macromonomer p-vinylbenzyl-poly(ethylene oxide) (V-PEO) via photoinitiated polymerization. A series of poly(HEMA/V-PEO) copolymer membranes with different compositions was prepared. The membranes were characterized using infrared, thermal and SEM analysis. The thermal stabilities of the copolymer membranes were found to be lowered by an increase in the ratio of macromonomer (V-PEO) in the membrane structure. Because of the incorporation of PEO segments, the copolymers exhibited significantly higher hydrophilic surface properties than pure poly(HEMA), as demonstrated by contact angle measurements. Equilibrium swelling studies were conducted to investigate the swelling behavior of the membranes. The equilibrium water uptake was reached in about 4 h. Moreover, the blood protein adsorption and platelet adhesion were significantly reduced on the surface of the PEO containing copolymer membranes compared to control pure poly(HEMA). Drug release experiments were performed in a continuous release system using model drug (vancomycin) loaded copoly(HEMA/V-PEO) membranes. A specific poly(HEMA/V-PEO) membrane formulation possessing the highest PEO content (with a HEMA:V-PEO (mmol:mmol) feed ratio of 112:1 and loaded with 40 mg antibiotic/g polymer) released about 81% of the total loaded drug in 24 h at pH 7.4. This membrane composition provided the best results and can be considered as a potential candidate for a transdermal antibiotic carrier and various biomedical and biotechnological applications. 相似文献
Summary: Dendronized poly(methacrylate)‐poly(ethylene oxide) (PDMA58‐b‐PEO45) formed as a stoichiometric inclusion complex with α‐cyclodextrin. The incorporation of the rodlike PDMA blocks produced no apparent change in the crystal structure, but its steric hindrance on the PEO chain resulted in lower yield as compared with the pure PEO. Moreover, the architectural transition from rod–coil to rod–rod led to a morphological change from spindly aggregates to rods in a binary solvent mixture of N,N‐dimethylformamide and water.
Synthesis and self‐assembly of the α‐cyclodextrin‐[dendronized poly(methacrylate)‐poly(ethylene oxide)] (α‐CD‐PDMA‐PEO) polypseudorotaxane (PR). 相似文献
Organic-inorganic hybrid materials were prepared by reacting 3-isocyanatopropyltriethoxysilane (IPTS) with hydroxyl terminated
poly(ethylene glycol) (PEG), poly(propylene glycol) (PPG) and poly(propylene glycol)-block-poly(ethylene glycol)-block-poly(propylene
glycol) (PEPG), followed by hydrolysis and condensation with acid catalysis. Composite membranes have been obtained by casting
hybrid sol on the microporous polysulfone substrate. The membranes were characterized by Fourier transform infrared (FT-IR),
13C NMR and 29Si NMR. The permeability coefficients of N2, O2, CH4 and CO2 were measured by variable volume method. The gas permeability coefficients increase with increasing molecular weight of the
polyethers. For the membranes containing PEG and PEPG, the higher values of CO2 permeability coefficients and CO2/N2 separation factors are due to the presence of ethylene oxide segments. In case of PEPG membranes, molecular weight has more
influence on CO2 permeability than the effect of facilitation by ethylene oxide. The addition of TEOS into hybrid sol results in the decrease
of all the gas permeability and does not affect the gas selectivity. PEG2000 membrane display the most performance among the
hybrid membranes investigated here. The best values observed are CO2 permeability of 94.2 Barrer with selectivity of 38.3 for CO2/N2 and 15.6 for CO2/CH4. 相似文献
Poly(ethylene glycol methyl ether)tosylate was prepared and used to initiate the polymerization of 2-methyl-2-oxazoline. The resulting poly(ethylene glycol methyl ether)-b-poly(N-acetyl ethylenimine) was hydrolyzed and neutralized to give poly(ethylene glycol methyl ether)-b-poly(ethyl-enimine) (PEO–PEI). 2-(thymin-1-yl)propionic acid, N-Cbz-alanine, N-Cbz-proline, N-Cbz-O-t-Bu-serine. and N-FMOC-proline were grafted onto the PEO–PEI copolymer; attempts were then made to remove the Cbz and FMOC protecting groups. 相似文献
The novel cross-linker, poly(propylene glycol) block poly(ethylene glycol) block poly(propylene glycol) diamine (PPG/PEG/PPGDA), was employed to chemically cross-link Matrimid 5218 at room temperature. The cross-linking reaction process was monitored by FTIR. The XRD was used to indicate the changing of the polymer structure by cross-linking reaction. The effects of the cross-linking reaction on mechanical performance, gel content and H2, CO2, N2 and CH4 gas transport properties of the cross-linked Matrimid membranes were investigated. The cross-linked Matrimid membranes display excellent CO2 permeability and CO2/light gas selectivity compared with the uncross-linked Matrimid membrane. Finally, the potential application of the cross-linked Matrimid membranes for CO2/light gas separation was explored. 相似文献
Hydroxy‐telechelic poly(methyl methacrylate)s of molecular weights below 5000 were obtained by atom transfer radical polymerization (ATRP) of methyl methacrylate followed by end‐capping with allyl alcohol via atom transfer radical addition (ATRA). As initiators for the ATRP, monofunctional initiators with an additional hydroxy group in the molecule or bifunctional initiators were employed. The successful synthesis of the hydroxy‐telechelic PMMA was proved by determination of their molecular weight using MALDI‐TOF‐MS. The efficiency of the end‐capping reaction was determined by 1H NMR spectroscopy using the allyl N‐(4‐tolyl)carbamate as end‐capping agent. Block copolymers comprising a poly(ethylene oxide) (PEO) block and a poly(methyl methacrylate) (PMMA) block were prepared by ATRP using a macroinitiator on the PEO basis. The dormant species of the macroinitiator consists of the phenyl chloroacetate moiety which shows a high rate of initiation. The successful synthesis of the poly(ethylene oxide)‐block‐poly(methyl methacrylate) was proved by 1H NMR spectroscopy; the ratios of EO/MMA repeating units in the feed and the copolymer were nearly equal. 相似文献
The ethylene oxide (EO) mobility in polystyrene-graft-[poly(ethylene oxide)] (PS-g-PEO) and polystyrene-graft-[stearyl poly(ethylene oxide)] (PS-g-SPEO) copolymers was evaluated by spin probe techniques. The ESR spectra indicate that 4-hydroxyl-TEMPO (TEMPO = 2,2,6,6-tetramethylpiperidine-N-oxyl) is strongly biased to the PEO phase of the PS-g-(S)PEO membranes. The rotational correlation time τc can also be employed to assess the PEO mobility in PS-g-(S)PEO membranes. Although τc of PS-g-(S)PEO usually decreases with increasing surface density of EO, it is of interest that τc is rather high when the surface within a depth of at least 5 nm is fully occupied by SPEO (sample PS-g-SPEO-72.6). 相似文献
A thermo- and pH- dual responsive luminescent hydrogel was successfully constructed by coupling dysprosium-containing polyoxometalates Na9DyW10O36 (DyW10) with the ABA triblock copolymer, where the B block is PEO and the A block is the thermosensitive poly(methoxydi(ethylene glycol) methacrylate-co-N,N-dimethylaminoethyl methacrylate). The complex hybrid underwent a sol-gel phase transition above the lower critical solution temperature (LCST) of the A block. DyW10 was electrostatically encapsulated into the hydrophobic domain of the A block with enhanced photoluminescence. When temperature cooled down, the luminescence could be restored. By addition of acids to protonate the A block, and emission of DyW10 was simultaneously enhanced. Sensitivity of poly(N,N-dimethy laminoethyl methacrylate) (PDMAEMA) to pH also enabled the emission of DyW10/copolymer hydrogel to be reversibly switched by alternating acid/base treatments. 相似文献
A novel composite membrane consisting of an interconnected MOF scaffold coated with cross‐linked poly(ethylene glycol) (PEG) has been developed. As a result of its unique structure, the membrane shows an exceptional 18‐fold permeability enhancement as compared to pristine PEG membranes, without compromising the selectivity. This performance is unattainable with current mixed‐matrix membranes (MMMs). Our optimized membrane has a permeability of 2700 Barrer with a CO2/N2 selectivity of 35, which surpasses the latest Robeson upper bound. 相似文献
Two reduction-cleavable ABA triblock copolymers possessing two disulfide linkages, PMMA-ss-PMEO3MA-ss-PMMA and PDEA-ss-PEO-ss-PDEA were synthesized via facile substitution reactions from homopolymer precursors, where PMMA, PMEO3MA, PDEA, and PEO represent poly(methyl methacrylate), poly(tri(ethylene glycol) monomethyl ether methacrylate, poly(2-(diethylamino)ethyl methacrylate), and poly(ethylene oxide), respectively. Spherical micelles were obtained through supramolecular self-assembly of these two triblock copolymers in aqueous solutions. The resultant micelles with abundant disulfide bonds could serve as soft templates and precisely accommodate gold nanoparticles in the core/shell interface as a result of the formation of Au-S bonds. 相似文献
Organic-inorganic hybrid membranes based on poly(ethylene oxide) (PEO) 6.25 wt%/poly(vinylidene fluoride hexa fluoro propylene) [P(VdF-HFP)] 18.75 wt% were prepared by using various concentration of nanosized barium titanate (BaTiO3) filler. Structural characterizations were made by X-ray diffraction and Fourier transform infrared spectroscopy, which indicate the inclusion of BaTiO3 in to the polymer matrix. Addition of filler creates an effective route of polymer-filler interface and promotes the ionic conductivity of the membranes. From the ionic conductivity results, 6 wt% of BaTiO3-incorporated composite polymer electrolyte (CPE) showed the highest ionic conductivity (6 × 10?3 Scm?1 at room temperature). It is found that the filler content above 6 wt% rendered the membranes less conducting. Morphological images reveal that the ceramic filler was embedded over the membrane. Thermogravimetric and differential thermal analysis (TG-DTA) of the CPE sample with 6 wt% of the BaTiO3 shows high thermal stability. Electrochemical performance of the composite polymer electrolyte was studied in LiFePO4/CPE/Li coin cell. Charge-discharge cycle has been performed for the film exhibiting higher conductivity. These properties of the nanocomposite electrolyte are suitable for Li-batteries. 相似文献