Ring‐Opening Metathesis Polymerization Based Post‐Synthesis Functionalization of Electron Beam Curing Derived Monolithic Media

Monolithic materials were prepared via electron‐beam curing from ethyl methacrylate, trimethylolpropane triacrylate, and norborn‐5‐ene‐2‐ylmethyl acrylate. Reaction of the norborn‐2‐ene groups with either RuCl₂(PCy₃)₂(CHPh) ( 1 ) or RuCl₂(PCy₃)(1,3‐dimesityl‐4,5‐dihydroimidazol‐2‐inylidene)(CHPh) ( 2 ) resulted in the surface attachment of the initiators. The extent of initiator immobilization was found to be substantially higher for 1 than for 2 . Reaction of the surface immobilized initiators with various monomers resulted in the desired surface modification of EB‐derived monoliths. The amounts of grafted monomer were determined by elemental analysis and ICP‐OES.

     

基于DNA的细胞膜功能化

细胞膜在细胞与外界环境间的物质运输、能量转换和信息传递等过程中起着重要作用,研究和控制细胞膜上的分子的相互作用,对理解和操控细胞的生理功能具有重要意义。脱氧核糖核酸(Deoxyribonucleic acid, DNA)分子具有精确自组装和可编程的特性,是一种研究生物膜分子相互作用的新工具。本综述中,我们概括了DNA分子修饰细胞膜的方法,随后介绍了基于DNA分子的监测、控制细胞膜分子相互作用的工作以及DNA分子介导细胞连接的研究,并分析了上述研究的局限性。最后,我们对基于DNA的细胞膜功能化研究进行总结与展望,以期促进对细胞膜功能的新认识,获得控制细胞功能的新方法。     

Novel UV‐induced photografting process for preparing poly(tetrafluoroethylene)‐based proton‐conducting membranes

A novel process comprising the UV‐induced photografting of styrene into poly(tetrafluoroethylene) (PTFE) films and subsequent sulfonation has been developed for preparing proton‐conducting membranes. Although under UV irradiation the initial radicals were mainly generated on the surface of the PTFE films by the action of photosensitizers such as xanthone and benzoyl peroxide, the graft chains were readily propagated into the PTFE films. The sulfonation of the grafted films was performed in a chlorosulfonic acid solution. Fourier transform infrared and scanning electron microscopy were used to characterize the grafted and sulfonated membranes. With a view to use in fuel cells, the proton conductivity, water uptake, and mechanical properties of the prepared membranes were measured. Even through the degree of grafting was lower than 10%, the proton conductivity in the thickness direction of the newly prepared membranes could reach a value similar to that of a Nafion membrane. In comparison with γ‐ray radiation grafting, UV‐induced photografting is very simple and safe and is less damaging to the membranes because significant degradation of the PTFE main chains can be avoided. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2624–2637, 2007     

Poly(N‐vinylcarbazole) chemically modified graphene oxide

A new soluble donor‐acceptor type poly(N‐vinylcarbazole)‐covalently functionalized graphene oxide (GO‐PVK) has been synthesized by reaction of DDAT (S‐1‐dodecyl‐S′‐(α,α′‐dimethyl‐α″‐aceticacid)trithiocarbonate)‐PVK with GO‐toluene‐2,4‐diisocynate. The incorporation of sufficient amount of PVK chains makes the modified GO nanosheets readily dispersible in organic solvents. The resulting material exhibits an enhanced solubility of 10 mg/mL in organic solvents. Covalent grafting of PVK onto the edge and surface of GO nanosheets did not change the carbazole absorption in the ultraviolet region, but substantially reduced the absorption intensity of GO in the visible region. The intensity of the emission band of GO‐PVK at 437 nm was a little bit quenched when compared with that of DDAT‐PVK, suggesting intramolecular quenching from PVK to GO. Such intramolecular quenching process may involve energy or electron transfer between the excited singlet states of the PVK moiety and the GO moiety. The HOMO/LUMO values and the energy bandgap of GO‐PVK experimentally estimated by the onset of the redox potentials are ?5.60, ?3.58, and 2.02 eV, respectively. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2642–2649, 2010     

Post‐Synthesis Functionalization of (Meth)acrylate Based Monoliths via Electron Beam Triggered Graft Polymerization

Porous polymeric monoliths were prepared via electron beam triggered free radical polymerization of (meth)acrylates. Post‐synthesis functionalization of these supports was accomplished via electron beam initiated free radical graft polymerization of methacryloyl‐substituted NHC precursors. The grafted precursors were converted into the corresponding copper complexes. Cu‐loadings were between 1.3 mg · g⁻¹ and 1.5 mg · g⁻¹. These supported catalysts were used in selected CO hydrosilylation and cyanosilylation reactions using a continuous flow setup.

     

Synthesis and Characterization of Poly(ether-block-amide) Membranes

Poly(ether-block-amide) membranes were made via casting a solution on a nonsolvent (water) surface. In this research, effects of different parameters such as ratio of solvent mixture (n-butanol/isopropanol), temperature, composition of coagulation bath (water) and polymer concentration, on quality of the thin film membranes were studied. The mechanism of membrane formation involves solution spreading, solvent–nonsolvent exchange, and partial evaporation of the solvent steps. Solvent- nonsolvent exchange is the main step in membrane formation and determines membrane morphology. However, at higher temperature of polymeric solution greater portion of solvent evaporates. The results showed that type of demixing process (mutual affinity between solvent and nonsolvent) has important role in film formation. Also, addition of solvent to the nonsolvent bath is effective on membrane morphology. The film quality enhances with increasing isopropanol ratio in the solvent mixture. This behavior can be related to increasing of solution surface tension, reduction of interfacial tension between solution and nonsolvent and delayed solvent-nonsolvent demixing. Uniform films were made at a temperature rang of 60–80 °C and a polymer concentration of 4–7 wt%. Morphology of the membranes was investigated with scanning electron micrograph (SEM). Pervaporation of ethyl butyrate/water mixtures was studied using these membranes and high separation performance was achieved. For ethyl butyrate/water mixtures, It was observed that both permeation flux and separation factor increase with increasing ethyl butyrate content in the feed. Increasing temperature in limited range studied resulted in decreasing separation factor and increasing permeation flux.     

Near‐infrared electrochromic poly(aryl ether)s based on isolated electroactive tetraphenyl‐p‐phenylenediamine moieties

A series of near‐infrared (NIR) electrochromic aromatic poly(aryl ether)s containing N,N,N′,N′‐tetraphenyl‐p‐phenylenediamine (TPPA) moieties in the backbone were prepared from the high‐temperature polycondensation reactions of a biphenol monomer, 2,5‐bis(diphenylamino)hydroquinone, with difluoro compounds. The obtained polymers were readily soluble in many organic solvents and showed useful levels of thermal stability associated with high glass‐transition temperatures (182–205 °C) and high char yields (higher than 40% at 800 °C in nitrogen). The polymer films showed reversible electrochemical oxidation with high contrast ratio both in the visible range and NIR region, and also exhibited high coloration efficiency (CE), low switching time, and stability for electrochromic operation. The polyether TPPA‐a thin film revealed good CE in visible (CE = 217 cm²/C) and NIR (CE = 192 cm²/C) region with reversible electroactive stability (over 500 times within 5% loss relative to its initial injected charge). © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5378–5385, 2009     

聚丙烯酸功能化多壁碳纳米管

Covalent functionalization of multiwalled carbon nanotubes （MWNT） with poly（acrylic acid） has been successfully achieved via grafting of poly（acryloyl chloride） on nanotube surface by esterification reaction of acyl chloride-bound polymer with hydroxyl functional groups present on acid-oxidized MWNT and hydrolysis of polymer attached to nanotubes. Polymer-functionalized MWNT could possess remarkably high solubility in water, and their aqueous solution was very stable without any observable black deposit for a long time. Characterizations of such functionalized MWNT samples using Fourier transform infrared spectrometer, transmission electron microscopy and nuclear magnetic resonance techniques indicated that poly（acrylic acid） was covalently attached to the surface of MWNT.     

Synthesis of Lead‐free CsGeI3 Perovskite Colloidal Nanocrystals and Electron Beam‐induced Transformations

Colloidal nanocrystals (NCs) of metal halide perovskite have recently aroused great research interest, due to their remarkable optical and electronic properties. We report a solution synthesis of a new member in this category, that is, all‐inorganic lead‐free cesium germanium iodine (CsGeI₃) perovskite NCs. These CsGeI₃ colloidal NCs are confirmed to adopt a rhombohedral structure. Moreover, the electron beam‐induced transformations of these lead‐free perovskite NCs have been investigated for the first time. The fracture of single‐crystalline CsGeI₃ nanocubes occurs first, followed by the emergence and growth of cesium iodine (CsI) single crystals and the final fragmentation into small debris with random orientations. Notably, the electron‐reduced Ge species in CsGeI₃ nanocubes exhibit a distinctive transformation path, compared to heavier Pb atoms in lead halide perovskite NCs.     

Functionalization of poly(lactide) with N‐phenyl maleimide using N‐acetoxy‐phthalimide during reactive extrusion

Radical grafting of poly(lactide) (PLA) during postpolymerization reactive extrusion is usually done with peroxide initiation, leading to undesirable side reactions (branching or crosslinking) and to difficulties to control the process parameters as well as the final macromolecular structure. The use of N‐acetoxy‐phthalimide (NAPI) was investigated as an alternative to peroxides for the functionalization in the melt of PLA with N‐phenylmaleimide (PhM) monomer. The use of NAPI was found to lead to similar grafting rates in comparison to peroxides, with a better control of the PLA macromolecular structure, due to the formation of nitroxide radicals that combine with the produced macroradicals. Also, the grafting site on PLA backbone was identified after hydrolysis of grafted PLA. Above an optimal PhM concentration, homopolymerization of the monomer was also highlighted. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 917–928     

Proton‐conducting electrolytes based on silylated and sulfonated polyetheretherketone: Synthesis and characterization

A derivative of polyetheretherketone (PEEK) having sulfonic acid groups and silicon‐containing substituents covalently bound to the aromatic backbone has been prepared as proton‐exchange membrane material. The polymer 4 (PhSiSPEEK) has been synthesized via (i) sulfonation of PEEK up to 0.9 degree of sulfonation (DS, the number of sulfonic groups per repeat unit), (ii) conversion of sulfonated PEEK 1 (SPEEK09) into sulfonyl chlorinated derivative 2 (PEEKSO₂Cl), (iii) lithiation of 2 and subsequent addition of PhSiCl₃, followed by hydrolysis. The chemical structure of the synthesized polymers has been investigated by ¹H NMR and ¹³C NMR and ATR/FTIR spectroscopy and their thermal stability has been evaluated by thermogravimetric analysis. The presence of inorganic moieties increases the thermal stability of 4 with respect to the sulfonated and not silylated product. Despite its very high DS, PhSiSPEEK is insoluble in water but does not possess the plastic properties needed to be used as an electrolyte membrane. Blend membranes made of SPEEK05 (DS = 0.5) and containing 10 and 25 wt % of 4 (DS = 0.9, degree of silylation DSi = 0.1) have been prepared and characterized by water uptake measurements and electrochemical impedance spectroscopy. The combination of the two functionalized polymers having different properties allows to obtain proton‐conducting electrolytes that are potential candidates for fuel cells applications. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2178–2186, 2010     

Novel synthesis of N‐substituted polyacrylamides: Derivatization of poly(acrylic acid) with amines using a triazine‐based condensing reagent

Poly(acrylic acid) (PAA) was derivatized through the reaction of its pendant carboxylic acid (CO₂H) groups with a wide range of amine‐terminated molecules. These molecules contained alkyl, hydroxyl, sulfonic acid, or perfluoroalkyl groups. N‐substitution of PAA was carried out by the simple addition of 4‐(4,6‐dimethoxy‐1,3,5‐triazin‐2‐yl)‐4‐methylmorpholinium chloride (DMTMM), a triazine‐based condensing reagent, to a mixture of PAA and amine‐terminated molecules. From proton nuclear magnetic resonance and infrared spectroscopy, it was confirmed that these functional molecules were introduced into the PAA side chain via amide bonds. By the alteration of the synthetic conditions, functional side‐chain contents of greater than 95% were achieved for aqueous reactions with taurine, ethanol amine, and butyl amine. Side‐chain conversion was limited to ≤80% for reactions with perfluoroalkyl amines in methanol. Thus, DMTMM is an attractive replacement for carbodiimide condensing reagents such as 1,3‐dicyclohexylcarbodiimide and 1‐ethyl‐3‐(3‐dimethylaminopropyl) carbodiimide. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 126–136, 2006     

New Poly(arylene ethynylene)s Consisting of Electron‐Deficient Aryleneimide Units

Summary: A new class of poly(arylene ethynylene)s (PAEs) containing an electron‐deficient N‐alkylphthalimide unit was prepared by means of a Sonogashira reaction. Complete solubility of the PAEs was observed by utilizing a 2,6‐diisopropylphenyl side chain. The chemical structure of the novel soluble polymer 3c was confirmed by NMR spectra, whereas the insoluble polymers were characterized by elemental analysis and IR spectra. Fluorescence measurements of 3c indicate a rigid structure and high symmetry in the excited state.

     

Breathing Pores on Command: Redox‐Responsive Spongy Membranes from Poly(ferrocenylsilane)s

Redox‐responsive porous membranes can be readily formed by electrostatic complexation between redox active poly(ferrocenylsilane) PFS‐based poly(ionic liquid)s and organic acids. Redox‐induced changes on this membrane demonstrated reversible switching between more open and more closed porous structures. By taking advantage of the structure changes in the oxidized and reduced states, the porous membrane exhibits reversible permeability control and shows great potential in gated filtration, catalysis, and controlled release.     

Radical‐mediated modification of polypropylene: Selective grafting via polyallyl coagents

Selective graft modifications of polypropylene (PP) are demonstrated in which desirable functionality is introduced without the degradation that accompanies conventional radical‐mediated processes. A range of modification strategies is presented, each exploiting triallyl trimellitate (TATM) or its derivatives to counteract the effects of macroradical fragmentation on the molecular weight. Model compound studies, as well as examinations of atactic PP reaction products, show that allylic ester activation occurs predominately by a radical‐addition/hydrogen‐transfer sequence, with a limited propensity for telomerization. The cografting of TATM and maleic anhydride leads to maleated PP of a high melt viscosity, whereas the apparent incompatibility of TATM with vinyltrimethoxysilane requires the use of TATM‐assisted thiol–ene addition and/or diallyl silane grafting to produce moisture‐curable PP derivatives. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4882–4893, 2005     

Synthesis of Poly(ethylene oxide)s with 1,2,4‐Triazol‐4‐yl End Groups – Macroligands for Bistable Metal‐Polymer Complexes

Summary: Poly(ethylene oxide) methyl ether 4H‐1,2,4‐triazol‐4‐yl ( 1 ) has been synthesized as a novel macroligand. ESI‐MS (electrospray ionisation mass spectrometry), MALDI‐TOF (matrix‐assisted laser desorption ionisation time‐of‐flight) MS as well as NMR spectroscopy were used for the accurate determination of number‐average molecular weights ( ), the crucial parameter for subsequent synthesis of metal‐polymer complexes of four different samples 1a – d . Reaction of polymer 1a with [Fe(H₂O)₆](nps)₂ (nps = 3‐nitrophenylsulfonate) gave [Fe( 1a )₃](nps)₂, a bistable metal‐polymer complex that exhibited low‐spin (LS) to high‐spin (HS) transitions around T_1/2 = 257 K, accompanied by a change in colour from violet (LS) to slightly yellow (HS).

The structure of [Fe( 1a )₃](nps)₂ and its magnetic properties.     

Covalently Linked Plasticizers: Triazole Analogues of Phthalate Plasticizers Prepared by Mild Copper‐Free “Click” Reactions with Azide‐Functionalized PVC

Copper‐free azide‐alkyne click chemistry is utilized to covalently modify polyvinyl chloride (PVC). Phthalate plasticizer mimics di(2‐ethylhexyl)‐1H‐triazole‐4,5 dicarboxylate (DEHT), di(n‐butyl)‐1H‐1,2,3‐triazole‐4,5‐dicarboxylate (DBT), and dimethyl‐1H‐triazole‐4,5‐dicarboxylate (DMT) are covalently attached to PVC. DEHT, DBT, and DMT have similar chemical structures to traditional plasticizers di(2‐ethylhexyl) phthalate (DEHP), di(n‐butyl) phthalate (DBP), and dimethyl phthalate (DMP), but pose no danger of leaching from the polymer matrix and forming small endocrine disrupting chemicals. The synthesis of these covalent plasticizers is expected to be scalable, providing a viable alternative to the use of phthalates, thus mitigating dangers to human health and the environment.