Amphiphilic Diblock Copolymer with Dithienylethene Pendants: Synthesis and Photo‐Modulated Self‐Assembly

In this work, an amphiphilic diblock copolymer (PEG₄₃‐b‐PSDTE₂₉) bearing photochromic dithienylethene (DTE) pendants is synthesized by reversible addition fragmentation chain transfer radical polymerization. The diblock copolymer was characterized by spectroscopic methods and gel permeation chromatography. The analyses proved the well‐defined structure and narrow molecular weight distribution of the diblock copolymer. The DTE pendants could undergo reversible photoisomerization between their open and closed forms in solution when irradiated with UV and visible light as indicated by ¹H NMR and UV‐vis spectroscopy. Hollow vesicle‐like structures were formed by gradually adding deionized water to the colorless PEG₄₃‐b‐PSDTE_29open (DTE in open form) tetrahydrofuran solution. Under the same conditions, the aggregates formed in the blue PEG₄₃‐b‐PSDTE_29close (DTE in closed form) solution were colloidal spheres with solid interiors. The isomerization of DTE pendants could cause the deformation of the vesicle‐like structures. The above results demonstrate a kind of novel photo‐modulated self‐assembly behavior of the amphiphilic diblock copolymer, which could be used for drug‐delivery and other applications.

     

Synthesis and Characterization of a Block Copolymer Containing Regioregular Poly(3‐hexylthiophene) and Poly(γ‐benzyl‐L‐glutamate)

Poly(3‐hexylthiophene)‐b‐poly(γ‐benzyl‐L ‐glutamate) (P3HT‐b‐PBLG) rod–rod diblock copolymer was synthesized by a ring‐opening polymerization of γ‐benzyl‐L ‐glutamate‐N‐carboxyanhydride using a benzylamine‐terminated regioregular P3HT macroinitiator. The opto‐electronic properties of the diblock copolymer have been investigated. The P3HT precursor and the P3HT‐b‐PBLG have similar UV–Vis spectra both in solution and solid state, indicating that the presence of PBLG block does not decrease the effective conjugation length of the semiconducting polythiophene segment. The copolymer displays solvatochromic behavior in THF/water mixtures. The morphology of the diblock copolymer depends upon the solvent used for film casting and annealing results in morphological changes for both films deposited from chloroform and trichlorobenzene.

     

Novel pH‐ and Temperature‐Responsive Block Copolymers with Tunable pH‐Responsive Range

A series of novel pH‐ and temperature‐responsive diblock copolymers composed of poly(N‐isopropylacrylamide) (PNIPAM) and poly[(L ‐glutamic acid)‐co‐(γ‐benzyl L ‐glutamate)] [P(GA‐co‐BLG)] were prepared. The influence of hydrophobic benzyl groups on the phase transition of the copolymers was studied for the first time. With increasing BLG content in P(GA‐co‐BLG) block, the thermal phase transition of the diblock copolymer became sharper at a designated pH and the critical curve of phase diagram of the diblock copolymer shifted to a higher pH region. Notably, when the BLG content in P(GA‐co‐BLG) block was more than 30 mol.‐%, the diblock copolymer responded sharply to a narrow pH change in the region of pH 7.4–5.5.

     

Ring and Disk‐Like CdSe Nanoparticles Stabilized with Copolymers

CdSe nanoparticles stabilized with the amphiphilic diblock copolymer polystyrene‐block‐poly(4‐vinylpyridine) were spread from toluene dispersion on the water surface. Monolayers could be transferred onto solid substrates using the Langmuir‐Blodgett technique. By means of atomic force and scanning electron microscopy highly symmetric ring and disk‐like structures with diameters ranging between 150 nm and 1200 nm were observed.

AFM image of a mixed monolayer of copolymer 12 and CdSe nanoparticles stabilized with polystyrene‐block‐poly(4‐vinylpyridine).     

Emulsion‐Induced Ordered Microporous Films Based on Micelles of Amphiphilic Poly(ethylene oxide)‐block‐Poly(methyl methacrylate) Diblock Copolymers

Well‐defined PEO‐b‐PMMA was prepared, initiated by macroinitiator PEO‐Br, by means of ATRP, where esterification of the terminal hydroxyl group of PEO with 2‐bromoisobutyryl bromide yielded a macroinitiator PEO‐Br. Highly ordered microporous films (hexagonal pattern) were constructed by emulsion micelles of such amphiphilic diblock copolymer formed from a solution with CHCl₃/H₂O/THF = 100:5:10 (v/v). We also constructed the microporous films using diblock copolymer by the current water‐assisted method.

     

Aggregation Behavior of Homo‐PS/PS‐b‐P2VP Blends at the Air/Water Interface

The mixed Langmuir monolayers and Langmuir–Blodgett (LB) films of homo‐polystyrene (h‐PS) and the diblock copolymer polystyrene‐block‐poly(2‐vinylpyridine) (PS‐b‐P2VP) have been characterized by the Langmuir monolayer technique and tapping mode atomic force microscopy (AFM), respectively. When the content of h‐PS is below 80 wt.‐%, the mixed LB films of h‐PS/PS‐b‐P2VP mainly exhibit isolated circular nanoaggregates. With a further increase of the h‐PS content (80–95%), however, highly uniform and stable necklace‐network structures are observed in the mixed LB films.

     

Synthesis of Well‐Defined Rod‐Coil Diblock Copolymer of Aromatic Polyether and Polyacrylonitrile by Chain‐Growth Condensation Polymerization and Atom Transfer Radical Polymerization

The synthesis of diblock copolymers of aromatic polyether and polyacrylonitrile (PAN) was conducted by chain‐growth condensation polymerization (CGCP) and atom transfer radical polymerization (ATRP) from an orthogonal initiator. When CGCP for aromatic polyether was carried out from a PAN macroinitiator obtained by ATRP with an orthogonal initiator, decomposition of the PAN backbone occurred. However, when ATRP of acrylonitrile was conducted from an aromatic polyether macroinitiator obtained by CGCP followed by introduction of an ATRP initiator unit, the polymerization proceeded in a well‐controlled manner to yield aromatic polyether‐block‐polyacrylonitrile (polyether‐b‐PAN) with low polydispersity. This block copolymer self‐assembled in N,N‐dimethylformamide to form bundle‐like or spherical aggregates, depending on the length of the PAN units in the block copolymer.

     

Strain‐Induced Phase Morphology in Melt Drawn Ultrathin Highly Oriented Block Copolymer Films

A strain‐induced microphase morphology has been established by the melt drawing process in a high molecular weight asymmetric polystyrene‐block‐poly(vinyl‐2‐pyridine) (PS‐b‐P2VP) diblock copolymer. For the first time to the best knowledge of the authors, the melt drawing process has been applied to block copolymers to produce free‐standing, ultrathin block copolymer films with a thickness of ≈100 nm. Intriguingly, during the melt drawing of the polymer a global strain‐induced unidirectional order of the microphase separated needle‐like domains of the block copolymer was generated. This morphology consists of a PS matrix with embedded highly oriented P2VP needle‐like domains oriented parallel to the drawing direction. The needle‐like morphology is explained by a simplified extended chain model of the diblock copolymer chains. Annealing of the films leads to a transition from the strain‐induced needle‐like morphology toward the quasi‐equilibrium sphere‐like morphology.

     

Synthesis and Surface Morphology of Tetraaniline‐block‐Poly(L‐lactate) Diblock Oligomers

Summary: Tetraaniline‐block‐poly(L ‐lactide) diblock oligomers are synthesized via ring‐opening polymerization. The diblock oligomers cast from an L ‐lactide selective solvent (chloroform) show spherical aggregates for the leucoemeraldine state, and ring‐like structures that are composed of much smaller spherical aggregates for the emeraldine state. The formation mechanisms of the two different surface morphologies are discussed in detail.

Surface morphology changes induced by oxidation of the aniline segment of tetraaniline‐block‐poly(L ‐lactate) and drying effects.     

New Strategy Targeting Well‐Defined Polymethylene‐block‐Polystyrene Copolymers: The Combination of Living Polymerization of Ylides and Atom Transfer Radical Polymerization

Well‐defined polymethylene‐block‐polystyrene (PM‐b‐PS) diblock copolymers were synthesized via a combination of living polymerization of ylides and atom transfer radical polymerization (ATRP) of styrene. A series of hydroxyl‐terminated polymethylenes (PM‐OHs) with different molecular weight and narrow molecular weight distribution were prepared using living polymerization of ylides following efficient oxidation in a quantitive functionality. Then, the macroinitiators (PM‐MIs ( = 1 900–15 000; PDI = 1.12–1.23)) transformed from PM‐OHs in ≈ 100% conversion initiated ATRPs of styrene to construct PM‐b‐PS copolymers. The GPC traces indicated the successful extension of PS segment ( of PM‐b‐PS = 5 000–41 800; PDI = 1.08–1.23). Such copolymers were characterized by ¹H NMR and DSC.

     

Synthesis and Self‐Assembly of pH‐Responsive Amphiphilic Poly(dimethylaminoethyl methacrylate)‐block‐Poly(pentafluorostyrene) Block Copolymer in Aqueous Solution

We report the synthesis of a novel pH‐responsive amphiphilic block copolymer poly(dimethylaminoethyl methacrylate)‐block‐poly(pentafluorostyrene) (PDMAEMA‐b‐PPFS) using RAFT‐mediated living radical polymerization. Copolymer micelle formation, in aqueous solution, was investigated using fluorescence spectroscopy, static and dynamic light scattering (SLS and DLS), and transmission electron microscopy (TEM). DLS and SLS measurements revealed that the diblock copolymers form spherical micelles with large aggregation numbers, N_agg ≈ 30 where the dense PPFS core is surrounded by dangling PDMAEMA chains as the micelle corona. The hydrodynamic radii, R_h of these micelles is large, at pH 2–5 as the protonated PDMAEMA segments swell the micelle corona. Above pH 5, the PDMAEMA segments are gradually deprotonated, resulting in a lower osmotic pressure and enhanced hydrophobicity within the micelle, thus decreasing the R_h. However, the radius of gyration, R_g remains independent of pH as the dense PPFS cores predominate.

     

Synthesis and Self‐Assembly of Amphiphilic Diblock Copolymers using a Fluorescently Labeled N‐Alkoxyamine Initiator

Summary: An initiator for nitroxide mediated ‘living’ free radical polymerization was prepared with a fluorescent tag attached to the initiating alkyl radical terminus. This was used to synthesize amphiphilic poly(acrylic acid)‐block‐polystyrene diblock copolymers, which self assembled in a tetrahydrofuran/buffer solution to form structures that are visible by fluorescence.

     

Poly(2‐vinylpyridine)‐block ‐Poly(ϵ‐caprolactone) Single Crystals in Micellar Solution

Self‐assembly of poly(2‐vinylpyridine)‐block‐poly(ϵ‐caprolactone) (P2VP‐b‐PCL) diblock copolymer in the presence of a selective solvent is investigated by transmission electron microscopy and atomic force microscopy. Addition of water into a P2VP‐b‐PCL solution in N,N‐dimethylformamide at 20 °C produces elongated truncated lozenge shaped single crystals of uniform size and shape in large quantities. The single crystals are composed of PCL single‐crystal layer sandwiched between two P2VP layers tethered on the top and bottom basal surfaces. The formation of the single crystals is found to depend on the temperature. These findings provide a facile approach to the preparation of uniform single crystals in large quantities.

     

Linear‐Hyperbranched Amphiphilic AB Diblock Copolymers Based on Polystyrene and Hyperbranched Polyglycerol

Summary: A convenient three‐step strategy has been developed for the preparation of well‐defined amphiphilic, linear‐hyperbranched block copolymers by hypergrafting. The synthetic procedure is based on a combination of carbanionic polymerization with the alkoxide‐based, controlled ring‐opening multibranching polymerization of glycidol. A linear AB diblock copolymer polystyrene‐block‐polybutadiene (PS‐b‐PB) with narrow polydispersity was obtained by anionic copolymerization. Subsequent hydroxylation by hydroboration led to PS₅₀₈‐b‐(PB‐OH)₅₆, used as macroinitiator for the polymerization of glycidol under slow monomer addition conditions.

Structure of the linear‐hyperbranched amphiphilic AB diblock copolymer PS₅₀₈‐b‐(PB₅₆‐hg‐PG_x) and an AFM micrograph of its micellar core–shell structure observed after solution casting.     

High‐Molecular‐Weight Polycarbonates Synthesized by Enzymatic ROP of a Cyclic Carbonate as a Green Process

High‐molecular‐weight PTeMC and PHMC were prepared by the lipase‐catalyzed polymerization of butane‐1,4‐diol or hexane‐1,6‐diol and diphenyl carbonate via the formation of a cyclic dimer by a green process. Cyclic carbonate dimers were prepared by the lipase‐catalyzed condensation of diphenyl carbonate with butane‐1,4‐diol or hexane‐1,6‐diol in dilute toluene solution using an immobilized lipase from Candida antarctica, and was followed by the ring‐opening polymerization of the cyclic dimer in bulk with the same lipase to produce PTeMC with = 119 000 g · mol^?1 and PHMC with = 399 000 g · mol^?1, respectively. Additionally, enzymatic polymerization of cyclic carbonate dimer was analyzed with respect to the K_m and V_max for the lipase.

     

Orienting the Demixion of a Diblock‐copolymer Using 193 nm Interferometric Lithography for the Controlled Deposition of Nanoparticles

DUV interferometric lithography and diblock copolymer self‐organization have successfully been combined to provide a simple and highly collective nanopatterning technique enabling the organization of nanoparticles over several orders of magnitude, from nanometre to millimetre. The nanostructural changes at the surface of the polymer film after thermal annealing have been monitored by AFM and the process parameters optimized for obtaining a long‐range organization of the lamellar domains. In particular, the impact of the annealing conditions and geometric parameters of the substrate patterns have been investigated. The nanopatterns resulting from the lamellar demixion of (PS‐b‐MMA) were used for a controlled deposition of nanoparticles. The affinity of the hydrophobic particles for the PS block was demonstrated, opening new doors towards the preparation of high‐density arrays of nanoparticles with potential applications in data storage.

     

Thermoresponsive Diblock Copolymer with Tunable Soluble–Insoluble and Soluble–Insoluble–Soluble Transitions

The thermoresponsive transition behavior of a diblock copolymer consisting of poly(ethylene glycol) methyl ether (mPEG) and poly(N,N‐dimethylaminoethyl methacrylate) (PDMAEMA) in aqueous solutions has been investigated. With a specific composition, the copolymer showed a unique tunable phase transition from no response in acidic media to a soluble–insoluble (S‐I) transition in neutral media and an S‐I‐S transition in basic media either in the presence of salt or for salt‐free solutions. The S‐I‐S transition can be tuned over a wide temperature range even to an S‐I type transition just by adding salts. In addition, phase transitions can occur in both pure water and saline solution under practical conditions (30–80 °C), which makes them suitable for a broad range of applications.

     

Ordered Honeycomb‐Structured Films from Dendronized PMA‐b‐PEO Rod‐Coil Block Copolymers

Summary: Fabrication of honeycomb‐patterned films from amphiphilic dendronized block copolymer (PEO₁₁₃‐b‐PDMA₈₂) by ‘on‐solid surface spreading’ and ‘on‐water spreading’ method is reported. Highly ordered honeycomb films with quasi‐horizontally paralleled double‐layered structure can be fabricated by the on‐solid surface spreading method. This work raises the possibility that such structures can be formed in amphiphilic dendronized block copolymers and extends the family of source materials.

     

Synthesis and Characterization of Novel Biodegradable Copolymers of 5‐Benzyloxy‐1,3‐dioxan‐2‐one and Glycolide

A series of novel biodegradable random copolymers of 5‐benzyloxy‐1,3‐dioxan‐2‐one (5‐benzyloxy‐trimethylene carbonate, BTMC) and glycolide were synthesized by ring‐opening polymerization. The copolymers were characterized by nuclear magnetic resonance (NMR) spectroscopy and gel permeation chromatography (GPC). The incorporation of BTMC units into the copolymer chains results in good solubility of the polymers in common solvents. The in vitro degradation rate can be tailored by adjusting the composition of the copolymers.

The in vitro degradation of the homopolymers and poly(BTMC‐co‐GA) copolymers.     

N‐(2‐Hydroxypropyl)methacrylamide (HPMA) Copolymer‐Linked Nitroxides: Potential Magnetic Resonance Contrast Agents

N‐(2‐Hydroxypropyl)methacrylamide (HPMA) copolymer‐linked nitroxides were synthesized as macromolecular contrast agents for MR imaging. Molar relaxivities of HPMA copolymer‐linked nitroxides increased linearly in proportion to the number of nitroxides attached per gram of copolymer. HPMA copolymer‐linked nitroxides with 15, 20 and 30 mol‐% nitroxide exhibited higher relaxivities than gadolinium diethylenetriaminepentaacetic acid (Gd‐DTPA). These results demonstrate the potential of HPMA copolymer‐linked nitroxides as MR contrast agents for solid tumors.

Structure of HPMA copolymer‐linked nitroxides.