Isothermal titration calorimetric studies of the acid-base properties of poly(N-isopropylacrylamide-co-4-vinylpyridine) cationic polyelectrolyte colloidal microgels

Isothermal titration calorimetry (ITC) and potentiometric titration were used to study the protonation properties of the 4-vinylpyridine (4-VP) moiety in cationic poly(N-isopropylacrylamide-co-4-vinylpyridine) colloidal microgels [poly(NIPAM-co-4-VP)]. Calorimetric pH titrations were performed using microgels of different 4-VP content and the influence of ionic strength and counter ions have been examined. The calorimetric titration output consists of several thermal contributions reflecting the complex nature of the interactions in the aqueous microgel dispersions. In contrast to the potentiometric results, the calorimetric titration data could not be completely described by a theoretical model solely taking into account protonation equilibria. Deviations from the proposed model correlate with swelling or shrinking of the gel particles. The calorimetric results also reveal a pronounced counter-ion effect of perchlorate compared to chloride ions. In the presence of perchlorate ions, small secondary thermal effects accompany protonation of the 4-VP moiety due, in part, to kinetically limited conformational changes in the co-polymer microgel.     

Porous,polyelectrolyte-filled membranes: Effect of cross-linking on flux and separation

A new type of membrane composed of a microfiltration substrate and a pore-filling polyelectrolyte has been produced by UV-induced grafting of 4-vinylpyridine (4VP) with varying amounts of divinylbenzene (DVB) onto polypropylene microfiltration membranes. Using the same irradiation conditions, it has been found that graft yield increases substantially in the presence of DVB. The increase in graft yield was shown to be accompanied by a substantial increase in the thickness of the grafted membranes and a small but significant decrease in water content. The composite membranes have very high charge densities and good mechanical properties.The membranes with various amounts of DVB were quaternized (methylated) and examined for reverse osmosis of various salts. In addition to an expected drop in flux due to the increased thickness and decreased water content, there was significantly different salt rejection for membranes with cross-linking. While, for example, there is practically no difference in rejection of NaCl by a membrane with 0.55% DVB and one having no cross-linker, the Na₂SO₄ rejection by the cross-linked membrane is, on average, twice as high as that by the non-cross-linked one. Large differences between the cross-linked and non-cross-linked membranes were found in the ratios of pure water to NaCl permeate fluxes of the membranes at various pressures. The results are discussed in terms of the physicochemical nature of the membranes and conformational changes of the pore-grafted poly(4-vinylpyridine).     

A VERSATILE AND REGIOSELECTIVE SYNTHESIS OF VICINAL AZIDOALCOHOLS USING CROSS-LINKED POLY（4-VINYLPYRIDINE） SUPPORTED AZIDE ION UNDER SOLVENT-FREE CONDITIONS

A new polymeric reagent, cross-linked poly（4-vinylpyridine） supported azide ion, [P4-VP]N3, was introduced as polymeric reagents for efficient and regioselective conversion of epoxides to azidohydrins in the presence of cross-linked poly（4-vinylpyridine） supported sulfuric acid, [P4-VP]H2SO4, as a solid proton source and as catalyst under solvent-free conditions. The advantages of this polymeric reagent over some of those reported in the literature are easy work-up procedure and regeneration of the reagent.     

Protonation of homotroponeiron tricarbonyl and cyclooctatrienoneiron tricarbonyl complexes

2,3-Homotroponeiron tricarbonyl, 8-methyl- and 8,8-dimethyl-2,3-homotroponeiron tricarbonyl complexes have been shown to undergo O-protonation in trifluoroacetic (TFA) and 96% sulfuric acids. In the latter acid the O-protonated cations rearrange to give the thermodynamically more stable C-protonated isomers. Cyclooctatrienoneiron tricarbonyl undergoes protonation H₂SO₄ to give the same cation as was obtained from the protonation of the homotroponeiron tricarbonyl complex in H₂SO₄. On the basis of reaction in D₂SO₄, it is suggested that the kinetically preferred site of protonation of the cyclooctatrienone complex is at C(2) one of the coordinated carbon atoms.     

Protonation and diffusion phenomena in poly(4-vinylpyridine)-based weak anion-exchange membranes

Purification and concentration of mineral acids can be carried through dialysis processes with anion-exchange membranes. Weak anion-exchange membranes are active only for sufficient acid concentrations in their structure, however too high concentrations result in significant proton leakage, i.e. reduction in the transport selectivity. The present paper deals with the kinetics of acid diffusion through two commercial poly(4-vinylpyridine)-based weak anion-exchange membranes which comprises protonation of the exchanging groups. The electrical conductivity and the water content of the membranes were shown to be linear function of the protonation degree of poly(4-vinylpyridine) groups. Kinetics of protonation and diffusion of acids have been investigated using dialysis cells. First diffusion kinetics has been studied in a conventional dialysis cell, by observation of the transient acid transport through the membrane (macroscopic studies). Besides, protonation kinetics was investigated using a miniaturised dialysis cell coupled to confocal Raman microspectrometer. Profiles of non-protonated and protonated sites in the membrane were recorded along time, depending on the membrane grade and the nature of the acid transported. Interpretation of the two sources of data yielded permeability coefficient and diffusion coefficient, whose meaning is discussed. A mechanism for protonation/diffusion in this type of weak anion exchangers in acidic media was proposed.     

Imidazolinone herbicides in strongly acidic media: Speciation and electroreduction

From UV-visible measurements and potentiometric titrations it follows that the lowest pK values (pK₁) of imidazolinone herbicides correspond to the simultaneous protonation/dissociation equilibria of both the pyridinic (or quinolinic) nitrogen and the carboxyl group, the following pK (pK₂) to the imminium nitrogen and the basic pK (pK₃) to the dissociation of the imido nitrogen. Below pH 6 and down to pH c.a. 2.5, the dominant form of the herbicide is a double ion having both positive and negative charges, this being important in discussing the effect of pH in the natural dynamics of imidazolinone herbicides, especially in their soil sorption. Electrochemical studies of the reduction of the herbicides were made on mercury and carbon electrodes in strongly acidic media (0.1 to 2.7 M H₂SO₄) as well up to pH 7. The reduction signals were all attributed to the reduction of the imidazolinone ring except the second peak/wave that was found to have originated by the reduction of the pyridine/quinoline ring. A signal observed in strongly acidic media and at highly negative overpotentials was attributed to the reduction of the imidazolinone ring of the product of the previous reduction in a process consisting of two reversible electron transfers followed by a protonation reaction.     

Polyelectrolyte membranes prepared by dynamic self-assembly of poly (4-styrenesulfonic acid-co-maleic acid) sodium salt (PSSMA) for nanofiltration (I)

In recent years, the layer-by-layer (LBL) self-assembly of polyelectrolyte has attracted much attention for the preparation of nanofiltration (NF) membranes. However, most researchers focused on the homopolymers, few studied on the copolymers for the preparation of NF membranes. In the present work, a series of nanofiltration membranes were prepared by dynamic self-assembly of a copolymer polyelectrolyte containing both weakly and strongly ionized groups, poly (4-styrenesulfonic acid-co-maleic acid) sodium salt (PSSMA), with poly (allylamine hydrochloride) (PAH) and poly (styrenesulfonic acid sodium salt) (PSS) on the modified polyacrylonitrile (PAN) ultra-filtration membranes. The effects of substrate, deposition pH, SS/MA ratio in PSSMA, concentration of the PSSMA and bilayer number on the properties of the NF membranes were investigated. The results indicated that the performances of the NF membranes prepared by dynamic self-assembly process were superior to those prepared by the static self-assembly process. The membranes terminated with PSSMA were negatively charged. Due to the changes of charge density and conformation of PSSMA in different pH conditions, the [PAH/PSS]₁PAH/PSSMA membrane prepared at pH 2.5 showed higher Na₂SO₄ rejection and larger flux than those of the membrane prepared at pH 5.7. The NF membrane [PAH/PSS]₁PAH/PSSMA composed of only two bilayers exhibited 91.4% Na₂SO₄ rejection and allowed solution flux of 28.6 L/m² h at 0.2 MPa. The solution flux increased to 106.6 L/m² h at 0.8 MPa, meanwhile, no obvious decrease in Na₂SO₄ rejection was observed.     

Fabrication of multi-layer composite hollow fiber membranes for gas separation

Using multilayer composite hollow fiber membranes consisting of a sealing layer (silicone rubber), a selective layer (poly(4-vinylpyridine)), and a support substrate (polysulfone), we have determined the key parameters for fabricating high-performance multilayer hollow fiber composite membranes for gas separation. Surface roughness and surface porosity of the support substrate play two crucial roles in successful membrane fabrication. Substrates with smooth surfaces tend to reduce defects in the selective layer to yield composite membranes of better separation performance. Substrates with a high surface porosity can enhance the permeance of composite membranes. However, SEM micrographs show that, when preparing an asymmetric microporous membrane substrate using a phase-inversion process, the higher the surface porosity, the greater the surface roughness. How to optimize and compromise the effect of both factors with respect to permselectivity is a critical issue for the selection of support substrates to fabricate high-performance multilayer composite membranes. For a highly permeable support substrate, pre-wetting shows no significant improvement in membrane performance. Composite hollow fiber membranes made from a composition of silicone rubber/0.1–0.5 wt% poly(4-vinylpyridine)/25 wt% polysulfone show impressive separation performance. Gas permeances of around 100 GPU for H₂, 40 GPU for CO₂, and 8 GPU for O₂ with selectivities of around 100 for H₂/N₂, 50 for CO₂/CH₄, and 7 for O₂/N₂ were obtained.     

A theoretical investigation on the structures of (NH3)·(H2SO4)·(H2O)0-14 clusters

Ternary clusters (NH₃)·(H₂SO₄)·(H₂O)_n have been widely studied. However, the structures and binding energies of relatively larger cluster (n > 6) remain unclear, which hinders the study of other interesting properties. Ternary clusters of (NH₃)·(H₂SO₄)·(H₂O)_n, n = 0-14, were investigated using MD simulations and quantum chemical calculations. For n = 1, a proton was transferred from H₂SO₄ to NH₃. For n = 10, both protons of H₂SO₄ were transferred to NH₃ and H₂O, respectively. The NH₄⁺ and HSO₄⁻ formed a contact ion-pair [NH₄⁺-HSO₄⁻] for n = 1-6 and a solvent separated ion-pair [NH₄⁺-H₂O-HSO₄⁻] for n = 7-9. Therefore, we observed two obvious transitions from neutral to single protonation (from H₂SO₄ to NH₃) to double protonation (from H₂SO₄ to NH₃ and H₂O) with increasing n. In general, the structures with single protonation and solvated ion-pair were higher in entropy than those with double protonation and contact ion-pair of single protonation and were thus preferred at higher temperature. As a result, the inversion between single and double protonated clusters was postponed until n = 12 according to the average binding Gibbs free energy at the normal condition. These results can serve as a good start point for studies of the other properties of these clusters and as a model for the solvation of the [H₂SO₄-NH₃] complex in bulk water.     

Stereoregularity of poly(2-vinylpyridine) determined by 1H-NMR and 13C-NMR spectroscopy

In order to determine the stereoregularity of poly(2-vinylpyridine), 2-vinylpyridine-β,β-d₂ was synthesized. The ¹H-NMR spectra of the deuterated polymer in D₂SO₄ and o-dichlorobenzene solutions showed three peaks, which were assigned to triad tacticities. Since the absorptions of heterotactic and syndiotactic triads of methine protons overlap those of methylene protons in nondeuterated polymers, only isotactic triad intensities can be obtained from the ¹H-NMR spectra of nondeuterated poly(2-vinylpyridine). The ¹³C-NMR spectra of poly(2-vinylpyridine) were obtained in methanol and sulfuric acid solutions. In methanol solution the absorption was split into three groups, which cannot be explained by triads, and in sulfuric acid solution several peaks were observed. These splittings may be due to pentad tacticity. The results show that poly(2-vinylpyridine) obtained by radical polymerization is an atactic polymer.     

Compression elastic modulus of neutral and protonated poly(N-vinylimidazole) hydrogels

The compression modulus of poly(N-vinylimidazole) (PVI) hydrogels synthesized by cross-linking polymerization in aqueous solution, was measured at room temperature in several related systems: i) just after polymerization, ii) swollen at equilibrium in deionized water, iii) swollen in HCl (aq) (pH=2.5), iv) swollen in HCl (pH=2.5) and 1 M NaCl (aq) solution and v) swollen in H₂SO₄ (pH=2.5) (aq) solution. Samples of the first and second groups are neutral whereas hydrogels of the other three groups are ionic because of protonation of basic imidazole groups. The experimental results were fitted with the Erman-Monnerie theory, applied to compression measurements for the first time, to determine the phantom modulus, [f_ph*], and the parameter κ_G which measures the constraining role of entanglements on the fluctuations of chains between knots.     

Counter-Ion Influence on Polypyrrole Potentiometric pH Sensitivity

The pH sensitivity of conducting polymer films is an important issue from the sensor design point of view. The doping and supporting electrolyte anions effect on the potentiometric sensitivity and response time of polypyrrole (PPy) electrodes towards changes of solution pH were studied. It was found that (i) the response of PPy doped by easily exchangeable common anions (Cl^–, NO₃ ^–, ClO₄ ^–) in their solutions (KCl, KNO₃, NaClO₄) is slow. In contrast, (ii) polypyrrole films deposited in the presence of weak acid anions (phthalates, oxalates, salicylates) were characterised by instantaneous responses in the above mentioned solutions. On the basis of electrochemical experiments (open circuit potential vs. time dependencies, cyclic voltammetry, EQCM), the observed differences were attributed to different mechanisms of pH sensitivity of tested films. The long response times are related to the incorporation of the solution ions into the film in order to compensate charges created due to protonation. On the other hand, if the ion-exchange is hindered as in the case of (ii), instantaneous open circuit responses are observed due to polarisation of the oxidised polymer layer, analogously to the metal electrode. Moreover, for these films the internal pH buffering within the polymer membrane will weaken the pH change effect.The mechanisms were confirmed in the course of studying the pH effect in solutions containing anions easily (KCl, NaClO₄, KNO₃) or hardly exchangeable with polypyrrole (K₂SO₄, sodium poly(4-styrenesulphonate) solutions) acidified with H₂SO₄.     

Determination of the thermodynamic quantities of uranium(VI)–carboxylate complexes by microcalorimetry

Potentiometric and microcalorimetric titration techniques were applied for the determination of the Gibbs free energies and enthalpies of the protonation and U(VI) complexation of some carboxylic acids (formic, acetic, glycolic, and propionic acids) in 1.0 M NaClO₄ solution at 25 °C. By using the values of ΔG determined by potentiometric titrations, the results of calorimetric titrations were analyzed to give the values of ΔH and ΔS. These enthalpy values indicated that the protonation and uranyl(VI) complexation of these carboxylates were mainly entropy-driven, that is, ∣–TΔS∣ ≫ ∣ΔH∣ in ΔG = ΔH − TΔS. The comparison of TΔS_m values for uranyl acetate and glycolate complexation with those for europium(III) complexation revealed that the complexation of U(VI) was accompanied by larger entropy changes due to the limited space in its coordination sphere caused by the steric hindrance of two oxygens in the linear dioxo structure of uranyl ion.     

Speciation in strongly acidic metastable solutions of oxotungstate(vi) compounds

The ionic composition of long-lived metastable aqueous solutions of oxo compounds of tungsten(IV) with pH ≤ 1 was studied by spectrophotometry. The nature of some isopolytung-states formed in these solutions in the presence of various inorganic acids (HCl, HClO₄, HNO₃, H₂SO₄, and H₂SeO₄) was established.     

Stereoregularity of poly(2-vinylpyridine) and poly-(4-vinylpyridine)

In order to determine the stereoregularity of poly(4-vinylpyridine), 4-vinylpyridine-β,β-d₂ was synthesized from 4-acetylpyridine. The ¹H-NMR spectra of the deuterated and nondeuterated polymers were measured and analyzed. From the ¹H-NMR spectra of poly(4-vinylpyridine-β,β-d₂), triad tacticity can be obtained, while the ¹H-NMR spectra of nondeuterated poly(4-vinylpyridine) give the fraction of isotactic triad. The ¹³C-NMR spectra of poly(4-vinylpyridine) were also observed, and the spectra of C₄ carbon of polymers were assigned by the pentad tacticities. The fraction of isotactic triad of poly(2-vinylpyridine) and poly(4-vinylpyridine) obtained under various polymerization conditions were determined. The radical polymerization and anionic polymerizations with phenylmagnesium bromide and n-butyllithium as catalysts of 4-vinylpyridine gave atactic polymers.     

Synthesis of electro‐active membranes by chemical vapor deposition (CVD) process

In the past two decades, many research is being carried out on coating of textile membranes with conductive polymers. In order to functionalize the textile membranes, coating of different intrinsically conductive polymers can be applied on these membranes through appropriate coating techniques like electrochemical polymerization, wet chemical oxidation and chemical vapor deposition (CVD). Noticeably, CVD process is one of the most suitable and environment friendly technique. In this research, microporous polyester and polytetrafluoroethylene (PTFE) membranes were coated with conductive poly(3,4‐ethylenedioxythiophene) (PEDOT) by CVD process in the presence of ferric(III)chloride (FeCl₃) used as an oxidant. Polymerization of PEDOT on the surface of membranes and pore size was examined by optical microscope and scanning electron microscopy (SEM). Structural analysis investigated with ATR‐FTIR, which revealed the successful deposition of PEDOT on membranes without damaging their parent structures. The amount of PEDOT in PEDOT‐coated polyester and PTFE membranes was explored with the help of thermogravimeteric analysis. Electrical resistance values of PEDOT‐coated membranes were measured by two probe method. The effect of different electrolyte solutions such as, distilled H₂O, Na₂SO₄, HCl, and H₂SO₄ on electrical properties of produced conductive membranes was investigated after dipping for certain period of time. It was found that membranes dipped in H₂SO₄ show very low electrical resistance values, i.e. 0.85 kΩ for polyester membrane and 1.17 kΩ for PTFE membrane. The obtained PEDOT‐coated electro‐active membranes may find their possible utility in fuel cells, enzymatic fuel cells, and antistatic air filter applications. Copyright © 2014 John Wiley & Sons, Ltd.     

Factors driving the protonation of poly(N-vinylimidazole) hydrogels

Poly(N-vinylimidazole) hydrogels immersed in aqueous acid solutions produce an increment in the pH of the bath because of proton uptake by basic imidazole moieties, leading to hydrogel protonation. Both kinetic and equilibrium measurements of the pH of the bath have been performed under a variety of conditions and with different hydrogel samples. The kinetics of the xerogel protonation process (which includes solvent and titrant diffusion, the true protonation reaction or ion–dipole association, and the polymer relaxation to a new conformation) are mostly driven by the size of the hydrogel sample, whereas other magnitudes, such as the initial pH, the effective polymer concentration, and the network structure, governed by the crosslinker ratio and total comonomer concentration in the feeding, have a minor influence. pK_a changes with the degree of protonation (α), delimitating two different regions: (1) a broad α range in which pK_a decreases with increasing α but less pronouncedly with increasing ionic strength and (2) an α range close to α = 1 in which pK_a decreases abruptly, more markedly with sulfate than with chloride counteranions and with larger ionic strengths. In the first region, pK_a is determined by repulsive electrostatic interactions and so is larger for titration with H₂SO₄ than with HCl and increases as the effective polymer concentration and ionic strength increase. Two steps (i.e., two protonation sites) can be observed in the titration curves, the second one corresponding to abrupt changes in the basicity of the second pK_a-versus-α region. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 2294–2307, 2004     

Gas permeability,diffusivity, and solubility of poly(4-vinylpyridine) film

Although poly(4-vinylpyridine) is believed to have good gas permselectivity, the intrinsic gas permeation property is rarely reported in the literature. The objective of this work is to study the the intrinsic gas permeation property of poly(4-vinylpyridine) using a free-standing film. Because of its brittleness and strong adhesion with most solid surfaces, a free-standing poly(4-vinylpyridine) film was therefore prepared from casting on a liquid mercury surface. The permeation behavior of He, H₂, O₂, N₂, CH₄, and CO₂ through the film was tested over a pressure range of 252 to 800 cm Hg at 35°C. The permeability and solubility decrease slightly with an increase in pressure, whereas the diffusivity increases as pressure increases. The pressure-dependent phenomenon can be explained using the partial immobilization model and the dual sorption model. An effective gas molecule diameter, which is defined as the square root of the product of gas collision and kinetic diameters, was used to correlate the diffusivity and gas molecule size, and an empirical equation was derived. Solubility is also a strong function of gas physical properties such as critical temperature and Lennard–Jones force constant, which are the measures of gas condensability and molecule interaction, respectively. In general, higher solubility in a polymer is obtained for gases with greater condensability and stronger interaction. Typical gas permeabilities of poly(4-vinylpyridine) measured at 619 cm Hg and 35°C are: 12.36 (He), 12.64 (H₂), 3.31 (CO₂), 0.84 (O₂), 0.14 (CH₄), and 0.13 (N₂) barrers. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 2851–2861, 1999     

Selective pH gradient formation across a capsule membrane corked with charged synthetic bilayers

Ultrathin, large nylon capsules whose porous membranes were corked with charged, synthetic bilayer-forming amphiphiles (cationic, anionic, zwitterionic bilayers) were prepared. The chemically stable, bilayer-corked capsules can selectively retain 0.1 M aqueous acidic (HCl, HNO₃, H₂SO₄, HClO₄ and p-toluenesulfonic acid) and alkaline solutions (NaOH, Ba(OH)₂, NH₄ OH, and N(Et)₄OH) in the inner aqueous phase depending on the surface charge of corking bilayers: the capsule corked with positively and negatively charged bilayers could selectively store alkalies and acids, respectively, and could keep a selective pH-gradient across the membrane. The zwitterionic bilayer-corking could retain neither acids nor alkalies in the inner aqueous phase. The permeation of these acids and alkalies to the outer phase (pH gradient decreasing across the capsule membrane) could be reversibly controlled by the phase transition of corking bilayers from gel to liquid crystalline state. The selective storage and permeation of acids and alkalies could be explained by the process of permeation of H⁺ or OH^- counter ions across the charged bilayer-corking.     

EC(EE) processes in the reduction of some 2-methylthio-4,6-di(alkylamino)-1,3,5-triazines on mercury electrodes

Polarographic (direct current, dc, and differential pulse, DP) studies of the electroreduction of the s-triazine derivatives ametryn (2-methylthio-4-ethylamino-6-isopropylamino)-1,3,5-triazine), dimethametryn (2-methylthio-4-ethylamino-6-(1,2-dimethylpropyl) amino-1,3,5-triazine) and simetryn (2-methylthio-4,6-di(ethylamino)-1,3,5-triazine) were made in the acidity range from 2.25 M H₂SO₄ to pH 6.5. Above this last pH value no signals were obtained. In DP polarography, two main reduction peaks were observed, accompanied by a pre-peak due to the adsorption of the herbicides on the electrode. The main peaks corresponded to two-electron irreversible reduction processes, at pH values higher than the protonation pK of the triazine ring (ca. 4). In this pH range, the protonation of the triazine ring preceding the reduction process is responsible for decrease in limiting current. At pH<pK the herbicides suffer a cleavage of the –SCH₃ group via two different intermediates related by a chemical reaction, whose extension depends on the herbicide.