Carbon black (CB) nanoparticles were encapsulated by poly(vinyl alcohol) (PVA) by a simple method of coacervation. Transmission electron microscopy (TEM) images clearly demonstrated that the successful encapsulation of PVA happened at the surfaces of CB nanoparticles. The particle‐size distribution measurements indicated that the diameters of the obtained PVA‐encapsulated CB (CB@PVA) nanoparticles were distributed within the nanoscale dimension. This strategy avoids the complicated polymerization process involved in the counterpart of polymer‐coating approaches.
A TEM image of PVA‐encapsulated carbon black. 相似文献
Summary: Fibers and yarns are promising forms to use and control the spatial orientation of carbon nanotubes in macroscopic materials. Various approaches have been proposed in the last few years to achieve fibers with a fraction of carbon nanotubes. Among them, coagulation spinning in aqueous media has proven to be a simple and capable method of leading to super‐tough materials. However, all water‐based processes described so far have made use of surfactant‐stabilized carbon nanotubes. In the present work, a method is shown to spin fibers from surfactant‐free nanotube solutions while preserving an all water‐based process. The resultant fibers exhibit mechanical and electrical properties that compare well with those of previously reported fibers spun with surfactants. The fibers exhibit a significant toughness and a high electrical conductivity.
Scanning electron micrograph of the fiber, showing the surface texture. 相似文献
We report a facile method to accomplish the crosslinking reaction of PVA with SWNTs, MWNTs, and C‐60 using MW irradiation. Nanocomposites of PVA crosslinked with SWNT, MWNT and C‐60 were prepared expeditiously by reacting the respective carbon nanotubes with 3 wt.‐% PVA under MW irradiation, maintaining a temperature of 100 °C, representing a radical improvement over literature methods to prepare such crosslinked PVA composites. This general preparative procedure is versatile and provides a simple route to manufacture useful SWNT, MWNT and C‐60 nanocomposites.
Atactic poly(vinyl alcohol) (at-PVA) and syndiotactic poly(vinyl alcohol) (st. PVA) prepared by gelation/crystallization using dimethyl sulphoxide/water mixtures were drawn in a hot oven at 160 °C under nitrogen. The degrees of polymerization of at- and st-PVA were 2000 and 1980, respectively. The drawability of at- and st-PVA films was affected by the composition of the solvent mixture as well as by quenching temperature. The drawability of at- and st-PVA films prepared by using the solvent mixture containing 60% of dimethyl sulphoxide and 40% of water became more pronounced as the temperature of gelation/crystallization decreased and the draw ratio reached maximum value at –80 °C. Namely, the greatest significant drawability was the same condition for at- and st-PVA films in spite of the different stereo-regularity. Even in this common best condition for significant drawability, however, the morphological properties of swollen gels and of the resultant dry gel films are different each other, dependent upon the tacticity. For at-PVA, small-angle light scattering under Hv polarization condition could not be observed in the swollen gels and in the dry films when the solutions were quenched at temperatures <–10 °C. In contrast, for st-PVA, the X-type scattering pattern from swollen gels became clearer as the temperature decreased but the pattern became indistinct under drying process at ambient condition. On the other hand, the fibrillar textures within the at- and st-PVA dry films became finer and the orresponding crystallinity became lower as the temperature of gelation/crystallization decreased. Thus it turned out that the morphological properties of the swollen gels and of the dried films play an important role to assure the greatest significant drawability. 相似文献
The use of carbon nanotubes in materials applications has been slowed due to nanotube insolubility and their incompatibility with polymers. We recently developed two protocols to overcome the insoluble nature of carbon nanotubes by affixing large amounts of addends to the nanotube sidewalls. Both processes involve reactions with aryl diazonium species. First, solvent-free functionalization techniques remove the need for any solvent during the functionalization step. This delivers functionalized carbon nanotubes with increased solubility in organic solvents and processibility in polymeric blends. Additionally, the solvent-free functionalization process can be done on large scales, thereby paving the way for use in bulk applications such as in structural materials development. The second methodology involves the functionalization of carbon nanotubes that are first dispersed as individual tubes in surfactants within aqueous media. The functionalization then ensues to afford heavily functionalized nanotubes that do not re-rope. They remain as individuals in organic solvents giving enormous increases in solubility. This protocol yields the highest degree of functionalization we have obtained thus far-up to one in nine carbon atoms on the nanotube has an organic addend. The proper characterization and solubility determinations on nanotubes are critical; therefore, this topic is discussed in detail. 相似文献
Herein we show that a new amphiphilic poly(vinyl alcohol)‐b‐poly(acrylonitrile) block copolymer dispersed in water can be easily loaded with gold nanoparticles by addition of chlorauric acid followed by reduction by sodium borohydride. After deposition of the so‐loaded micelles onto a silicon wafer, followed by an appropriate thermal treatment, the poly(acrylonitrile) core of the micelles is carbonized, while the poly(vinyl alcohol) shell is completely decomposed and volatilized, leading to gold encapsulated in carbon nanoparticles. The morphology of the micelles is maintained during thermal treatment without requiring shell‐cross‐linking of the micelles prior to pyrolysis. 相似文献
A facile approach to polymer nanocomposites with single‐wall carbon nanotubes and cationic polymers is reported. The composite material was synthesized by producing carboxylic acid groups at the nanotube termini followed by a reaction with poly(allylamine) in water. Fourier transform infrared spectral and thermogravimetric analyses corroborate that the poly(allylamine) chains were wrapped on the surface of the carbon nanotubes. The scanning electron microscopic (SEM) image shows that the nanotubes were dispersed with little aggregation, thus, strongly suggesting that the poly(allylamine) chains have covered the single‐wall carbon nanotubes, which was further evidenced by transmission electron microscopy. The composites are soluble in water, and this solubilization process opens up new opportunities in the solution chemistry on pristine nanotubes.
Summary: Poly(N‐vinylpyrrolidone) (PVP) was used in two methods to prepare polymer nanofibers containing Ag nanoparticles. The first method involved electrospinning the PVP nanofibers containing Ag nanoparticles directly from the PVP solutions containing the Ag nanoparticles. N,N‐Dimethylformamide was used as a solvent for the PVP as well as a reducing agent for the Ag+ ions in the PVP solutions. In the second method, poly(vinyl alcohol) (PVA) aqueous solutions were electrospun with 5 wt.‐% of the PVP containing Ag nanoparticles. The Ag nanoparticles were evenly distributed in the PVA nanofibers. PVP containing Ag nanoparticles could be used to introduce Ag nanoparticles to other polymer nanofibers that are miscible with PVP.
TEM image of a PVA nanofiber electrospun with 5 wt.‐% of the PVP containing Ag nanoparticles. 相似文献
A simple method to fabricate polymer nanocomposites with single‐walled carbon nanotubes is reported, in which the nanotubes were reacted with poly(L ‐lysine) by using high‐speed vibration milling. The nanocomposites obtained were characterized by Fourier transform infrared (FT‐IR), UV–Vis spectroscopy, and thermogravimetric methods. The morphology as well as the dispersion of the carbon nanotubes were determined by scanning and transmission electron microscopy.
Fully-biodegradable bacterial poly(3-hydroxybutyrate) (PHB)/chemosynthetic poly(vinyl alcohol) (PVA) blend films with compositional gradient from one surface to the other surface of the films were prepared by a dissolution-diffusion technique. Three kinds of PVA samples, high- and low-molecular weight atactic PVA and highly syndiotactic PVA (s-PVA), were used in order to investigate the effects of molecular weight and tactic structure on the generation of compositional gradient. The solution of PHB in 1,1,1,3,3,3-hexafluoro-2-propanol (HFIP), which is also a good solvent for PVA, was cast on the PVA film and then the solvent HFIP was evaporated. By selecting the optimum volume of solvent and the evaporation rate, the PHB/PVA blend film with compositional gradient was obtained. The formation of compositional gradient was confirmed by FT-IR microscopy and ATR-FT-IR analysis. The 50%/50% PHB/s-PVA blend film with a nearly ideal compositional gradient, that is, the composition of PHB (or PVA) in the film changing gradually from 100% at one surface to 0% at the other surface of the film was obtained by casting PHB/HFIP solution on to the s-PVA film. Positional dependence of the absorbance of C==O and OH stretching bands along the film thickness direction for the PHB/S-PVA cast films. 相似文献
