Multicomponent phase change microfibers, which can storage and release thermal energy in a stepwise manner, are firstly prepared through a facile one‐step multifluidic compound‐jet electrospinning with temperature control. The multiresponsive effect benefits from a special multichannel tubular microstructure that could controllably encapsulate different phase change materials into the channels independently. Aside from the fabrication of multicomponent phase change microfibers, the melt multifluidic compound‐jet electrospinning is promising for applications related to microencapsulation and multifunctional material fields.
A new route to high‐performance electrospun polymer fibers was developed using a self‐bundling electrospinning technique combined with post‐treatments such as stretching and annealing under conditions similar to those used for conventional fibers. Self‐bundled electrospun PAN fiber yarns were characterized by SEM, mechanical tests, polarized FT‐IR spectroscopy and WAXD. The obtained results revealed that the PAN nanofiber yarns possessed enhanced alignment, a higher degree of crystallinity and higher molecular orientation after treatments, resulting in a remarkable improvement in mechanical performance, approaching the strength value of the corresponding conventional fibers.
A main‐chain liquid crystalline polymer has been obtained by applying a Hoveyda–Grubbs 2nd generation catalyst in acyclic diene metathesis polymerization (ADMET) of a monomer containing on one end a terminal dimethylvinylsilyl group and at the other end a terminal C C double bond. This material showed an interesting Iso‐de Vries SmA* – SmC* – Glass phase transition with a very small layer shrinkage on progressing from the SmA* phase into the SmC* phase. Will this material present a helical structure along the fiber axis in the SmC* temperature range? Several physical characterization methods including XRD, optical observation, and microtome technique have been used to investigate the internal structural organization in this liquid crystalline fiber.
Polymorphism control of PVDF has been realized through electrospinning. PVDF fibrous membranes with fiber diameter in the range of 100 nm to several micrometers were produced by electrospinning and the crystal phase of electrospun PVDF fibers can be adjusted at the same time. Through the control of electrospinning parameters such as the solvent, electrospinning temperature, feeding rate, and tip‐to‐collector distance, PVDF fibrous membranes containing mainly α‐ or β‐ or γ‐phase could be fabricated successfully.
The free volume in thin films of poly(N‐isopropylacrylamid) end‐capped with n‐butyltriocarbonate (nbc‐PNIPAM) is probed with positron annihilation lifetime spectroscopy (PALS). The PALS measurements are performed as function of energy to obtain depth profiles of the free volume of nbc‐PNIPAM films. The range of nbc‐PNIPAM films with thicknesses from 40 to 200 nm is focused. With decreasing film thickness the free volume increases in good agreement with an increase in the maximum swelling capability of the nbc‐PNIPAM films. Thus in thin hydrogel films the sorption and swelling behavior is governed by free volume.
Summary: Experimental and modeling studies of addition–fragmentation chain transfer (AFCT) during radical polymerization of methyl methacrylate in the presence of poly(methyl methacrylate) macromonomer with 2‐carbomethoxy‐2‐propenyl ω‐ends (PMMA‐CO2Me) at 60 °C are reported. The results revealed that AFCT involving PMMA‐CO2Me formed in situ during methyl methacrylate polymerization has a negligible effect on the molecular weight distribution.
Summary: New polymer gelators consisting of poly(propylene glycol) or poly(ethylene glycol) and L ‐lysine‐based low‐molecular‐weight gelators have been developed. These polymer gelators were synthesized according to a simple procedure with high reaction yield, and formed organogels in many organic solvents. The organogelation mechanism was proposed from the transmission electron microscopy and FTIR spectroscopy studies.
Structures of the polymer gelators synthesized here. 相似文献
Nanofiber scaffolds of collagen have been fabricated via electrospinning using benign solvent systems as a replacement for 1,1,1,3,3,3 hexafluoro‐2‐propanol. Simple binary mixtures of phosphate‐buffered saline and ethanol have been found to be highly effective for electrospinning. FTIR spectra suggest that the triple helical structure of collagen was conserved after dissolution and electrospinning. Crosslinking of the electrospun collagen scaffolds was achieved with standard methods.
Conductive Polyamide 6 (PA‐6) nanofibers were prepared by making a conductive polypyrrole coating obtained by a polymerization of pyrrole molecules directly on the fiber surface. A solution of PA‐6 added with ferric chloride in formic acid has been electrospun and the fibers obtained showed an average diameter of 260 nm with a smooth surface. The fibers have been then exposed to pyrrole vapours and a compact coating of polypyrrole was formed on the fiber surface. The growth of the coating was monitored by measuring the increment of the fiber diameter and by FT‐IR spectroscopy. The same technique was used to study the interaction between the ferric chloride and the polyamide chains. The polypyrrole coating on the fibers turned out to be conductive with a pure resistive characteristic and the stability of the conductivity was evaluated in air at room temperature.
Transparent film materials with excellent mechanical and thermal properties were elaborated by drying a latex suspension of armored polymer/Laponite composite particles. Low‐temperature TEM observation of ultrathin cross‐sections of the films indicated a unique network morphology characterized by a “honeycomb” distribution of the Laponite platelets remindful of the original particles morphology.
A simple method to obtain novel nanofibers composed of polyelectrolyte complexes (PECs) has been proposed. It consists of the electrospinning of a mixed homogeneous solution of polyelectrolyte partners, and the formation of PEC during the electrospinning. This was achieved by careful choice of the composition of the spinning solutions. Chitosan was the polycationic partner, with either a weak polyacid [poly(acrylic acid), PAA] as a counterpart or a strong one [poly(2‐acrylamido‐2‐methylpropanesulfonic acid), PAMPS]. The fibrous mats were composed of nanofibers with mean diameters of ca. 100 nm. They retained their integrity over the pH range which is typical of the corresponding PEC.
When two immiscible polymers are brought into intimate contact, highly localized mixing of polymer chains creates an “interphase” region. Materials that are entirely interphase are fabricated by forced‐assembly using layer‐multiplying coextrusion to form assemblies of thousands of nanolayers. Analysis of the interphase materials with conventional methods of polymer analysis confirms certain theoretical predictions for the first time. The unique properties of the new interphase materials result from lower free volume than the constituents.
Atomic force microscopy phase image from the cross‐section of a PC/PMMA nanolayer film with 4096 layers and average layer thickness of 25 nm. 相似文献
An enzymatic tandem reaction is described in which the enzymes phosphorylase and Deinococcus geothermalis glycogen branching enzyme (Dg GBE) catalyze the synthesis of branched polyglucans from glucose‐1‐phosphate (G‐1‐P). Phosphorylase consumes G‐1‐P and polymerizes linear amylose while Dg GBE introduces branching points on the α‐(1 → 6) positions by reshuffling short oligosaccharides. The resulting branched polyglucans have an unusually high degree of branching of 11%.
Summary: A chitin‐xylan hybrid polysaccharide having β(1 → 4)‐linked alternating structure of N‐acetyl‐D ‐glucosamine and D ‐xylose was synthesized via chitinase‐catalyzed polymerization. An oxazoline derivative of D ‐xylosyl‐β(1 → 4)‐N‐acetyl‐D ‐glucosamine ( 1 ) was effectively polymerized by the catalysis of chitinase from Bacillus sp., giving rise to a water‐soluble chitin‐xylan hybrid polysaccharide ( 2 ) in good yields. Molecular weights ( ) of 2 reached 1 500, which corresponds to 8–10 saccharide units.
A chitin‐xylan hybrid polysaccharide ( 2 ) synthesized via chitinase‐catalyzed polymerization. 相似文献
In this article, electrospinning technique has been demonstrated for the synthesis of ultra‐low dielectric constant polyimide fiber membranes. Poly(amic acid) fiber membranes have been prepared as precursor. After the treatment of thermal imidization, ultra‐low dielectric constant polyimide fibers membranes can be obtained. The morphologies and structures of precursors and products are characterized by scanning electron microscopy (SEM), Fourier transmission infrared (FTIR) spectra, and a radio frequency (RF) impedance/capacitance material analyzer. The DK of the as‐prepared polyimide membrane ranges from 1.53 to 1.56, which could be applied in the electronic packaging industry.
Au nanoparticles (NPs) and polymer composite particles with phase‐separation structures were prepared based on phase separation structures. Au NPs were successfully synthesized in amphiphilic block‐copolymer micelles, and then composite particles were formed by a simple solvent evaporation process from Au NPs and polymer solution. The phase separated structures (Janus and Core‐shell) were controlled by changing the combination of polymers having differing hydrophobicity.
Summary: Tetraaniline‐block‐poly(L ‐lactide) diblock oligomers are synthesized via ring‐opening polymerization. The diblock oligomers cast from an L ‐lactide selective solvent (chloroform) show spherical aggregates for the leucoemeraldine state, and ring‐like structures that are composed of much smaller spherical aggregates for the emeraldine state. The formation mechanisms of the two different surface morphologies are discussed in detail.
Surface morphology changes induced by oxidation of the aniline segment of tetraaniline‐block‐poly(L ‐lactate) and drying effects. 相似文献
