Airy plasmons: non‐diffracting optical surface waves

Airy beams represent an important class of non‐diffracting waves which can be realized on a flat surface. Being generated in the form of surface‐plasmon polaritons, such Airy plasmons demonstrate many remarkable properties: they do not diffract while propagating along parabolic trajectories, and they recover their shape after passing through obstacles. This paper reviews the basic physics of Airy plasmons in both paraxial and non‐paraxial cases, and describes the experimental methods for generation of Airy surface waves on metal surfaces, including a control of their trajectories, as well as the interference of Airy plasmons and hot‐spot generation. Many unusual properties of Airy plasmons can be utilized for useful applications, including plasmonic circuitry and surface tweezers. Picture: Observation of two colliding Airy plasmons.     

Bessel and annular beams for materials processing

Non‐Gaussian beam profiles such as Bessel or annular beams enable novel approaches to modifying materials through laser‐based processing. In this review paper, properties, generation methods and emerging applications for non‐conventional beam shapes are discussed, including Bessel, annular, and vortex beams. These intensity profiles have important implications in a number of technologically relevant areas including deep‐hole drilling, photopolymerization and nanopatterning, and introduce a new dimension for materials optimization and fundamental studies of laser‐matter interactions.     

Efficiency Improvement in Polymer Light‐Emitting Diodes by “Far‐Field” Effect of Gold Nanoparticles

The “far‐field” effect of metal nanoparticles (NPs), when chromophores localized nearby metal NPs (typically the distance >λ/10), is an important optical effect to enhance emission in photoluminescence. The far‐field effect originates mainly from the interaction between origin emission and mirror‐reflected emission, resulting in the increased irradiative rate of chromophores on the mirror‐type substrate. Here, the far‐field effect is used to improve emission efficiency of polymer light‐emitting diodes (PLEDs). A universal performance improvement is achieved for the full visible light (red, green, blue) PLEDs, utilizing gold (Au) NPs to modify the indium tin oxide (ITO) substrates; this is shown by experimental and theoretical simulation to mainly come from the far‐field effect. The optimized distance, between the NPs and chromophores with visible light emission ranging from 400 to 700 nm, is 80–120 nm. Thus the scope of the far‐field may overlap the light‐emitting profile very well to enhance the efficiency of optoelectronic devices. The 30–40% enhancement is obtained for different color‐emitting materials through distance optimization. The far‐field effect is demonstrated to enhance device performance for materials in the full‐visible spectral range, which extends the optoelectric applications of Au NPs.     

Few‐cycle,broadband, mid‐infrared optical parametric oscillator pumped by a 20‐fs Ti:sapphire laser

A few‐cycle, broadband, singly‐resonant optical parametric oscillator (OPO) for the mid‐infrared based on MgO‐doped periodically‐poled LiNbO₃ (MgO:PPLN), synchronously pumped by a 20‐fs Ti:sapphire laser is reported. By using crystal interaction lengths as short as 250 µm, and careful dispersion management of input pump pulses and the OPO resonator, near‐transform‐limited, few‐cycle idler pulses tunable across the mid‐infrared have been generated, with as few as 3.7 optical cycles at 2682 nm. The OPO can be continuously tuned over 2179‐3732 nm (4589‐2680 cm^‐1) by cavity delay tuning, providing up to 33 mW of output power at 3723 nm. The idler spectra exhibit stable broadband profiles with bandwidths spanning over 422 nm (FWHM) recorded at 3732 nm. The effect of crystal length on spectral bandwidth and pulse duration is investigated at a fixed wavelength, confirming near‐transform‐limited idler pulses for all grating interaction lengths. By locking the repetition frequency of the pump laser to a radio‐frequency reference, and without active stabilization of the OPO cavity length, an idler power stability better than 1.6% rms over >2.75 hours is obtained when operating at maximum output power, in excellent spatial beam quality with TEM₀₀ mode profile. Photograph shows a multigrating MgO:PPLN crystal used as a nonlinear gain medium in the few‐cycle femtosecond mid‐IR OPO. The visible light is the result of non‐phase‐matched sum‐frequency mixing between the interacting beams.     

Radiation Emission of Fast Electrons in Collisions with “Ion‐Sphere” in Dense Plasmas

Radiative emission of fast electrons in collision with an “ion‐sphere” electron distribution in dense plasmas is under consideration. The electron structure of the ion sphere is calculated ab initio using self‐consistent solution of both bound and free electron distribution inside the sphere. Two radiation channels are included: emission of the colliding electron itself in static potential (conventional or static Bremsstrahlung) and the emission of “ion sphere” medium due to its polarization by the colliding electron (polarization Bremsstrahlung). The last one is calculated in the frame of local plasma density approximation. Interference between conventional and polarization Bremsstrahlung is taken into account. It is shown that spectral cross section of the process has characteristic features depending on plasma density and ionization stage of plasma ions. (© 2013 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Five‐cycle pulses near λ = 3 μm produced in a subharmonic optical parametric oscillator via fine dispersion management

Five‐cycle (50 fs) mid‐IR pulses at 80‐MHz repetition rate are produced using a degenerate (subharmonic) optical parametric oscillator (OPO), synchronously pumped by an ultrafast 1560‐nm fiber laser. The effects of cavity dispersion and the length of a periodically poled lithium niobate (PPLN) gain element on the output spectrum and pulse duration are investigated by taking advantage of a very broad (∼ 1000 cm⁻¹) gain bandwidth near the 3.1‐μm OPO degeneracy point. A new method of assessing the total OPO group delay dispersion across its entire spectrum is proposed, based on measuring spectral signatures of trace amounts of molecular gases injected into the OPO cavity.     

Size and Shape Effect of Gold Nanoparticles in “Far‐Field” Surface Plasmon Resonance

The “far‐field” surface plasmon resonance (FSPR) of metal nanoparticles, which have built a facile way to emission enhancement of red, green, blue, and white with nice reproducibility, has big potential application in solution‐processed organic light‐emitting diodes (OLEDs). According to the theory of the “far‐field” effect, the reflectivity of the metal surface and the phase shift at the reflection play an important role in enhancing ratio, which strongly relate to the size and shape of nanoparticles. In this work, gold nanospheres with different sizes and nanorods are synthesized in order to determine the size and shape effect of FSPR. The results demonstrate that the one with higher reflectivity in a certain range induces a better emission enhancement in the luminous efficiency and the maximum brightness. The nanoparticles with bigger sizes and shape of rods have higher reflectivity, which is consistent with the simulation based on FSPR effect. The phase shifts of different nanoparticles are optimized by the distance between gold nanoparticles and emitters. The metal NPs with a high reflectivity and the applicable phase shift will have big potential for the emission enhancement in OLEDs.     

Few‐optical‐cycle light pulses with passive carrier‐envelope phase stabilization

One of the most advanced frontiers of ultrafast optics is the control of carrier‐envelope phase (CEP) ϕ of light pulses, which enables the generation of optical waveforms with reproducible electric field profile. Such control is important for pulses with few‐optical‐cycle duration, for which a CEP variation produces a strong change in the waveform, so that strongly nonlinear optical phenomena, such as multiphoton absorption, above‐threshold ionization and high‐harmonic generation become CEP‐dependent. In particular, CEP control is the prerequisite for the production of isolated attosecond pulses. Standard laser systems generate pulses that are CEP unstable; the CEP can be stabilized using either active or passive methods. Passive, all‐optical schemes rely on difference‐frequency generation (DFG) between two pulses sharing the same CEP: in this process the phases of the two pulses add up with opposite signs, leading to cancellation of the shot‐to‐shot CEP fluctuations. This paper presents an overview of passive CEP stabilization schemes, starting from the basic concepts and progressing to the details of the practical implementations of the idea. The passive approach allows the generation of CEP‐controlled few‐optical‐cycle pulses covering a very broad range of parameters in terms of carrier frequency (from visible to mid‐IR), energy (up to several mJs) and repetition rate (up to hundreds of kHz)     

Optical performance of materials for X‐ray refractive optics in the energy range 8–100 keV

A quantitative analysis of the crucial characteristics of currently used and promising materials for X‐ray refractive optics is performed in the extended energy range 8–100 keV. According to the examined parameters, beryllium is the material of choice for X‐ray compound refractive lenses (CRLs) in the energy range 8–25 keV. At higher energies the use of CRLs made of diamond and the cubic phase of boron nitride (c‐BN) is beneficial. It was demonstrated that the presence of the elements of the fourth (or higher) period has a fatal effect on the functional X‐ray properties even if low‐Z elements dominate in the compound, like in YB₆₆. Macroscopic properties are discussed: much higher melting points and thermal conductivities of C and c‐BN enable them to be used at the new generation of synchrotron radiation sources and X‐ray free‐electron lasers. The role of crystal and internal structure is discussed: materials with high density are preferable for refractive applications while less dense phases are suitable for X‐ray windows. Single‐crystal or amorphous glass‐like materials based on Li, Be, B or C that are free of diffuse scattering from grain boundaries, voids and inclusions are the best candidates for applications of highly coherent X‐ray beams.     

Carbon contamination of soft X‐ray beamlines: dramatic anti‐reflection coating effects observed in the 1 keV photon energy region

Carbon contamination is a general problem of under‐vacuum optics submitted to high fluence. In soft X‐ray beamlines carbon deposit on optics is known to absorb and scatter radiation close to the C K‐edge (280 eV), forbidding effective measurements in this spectral region. Here the observation of strong reflectivity losses is reported related to carbon deposition at much higher energies around 1000 eV, where carbon absorptivity is small. It is shown that the observed effect can be modelled as a destructive interference from a homogeneous carbon thin film.     

Tuning the absorption spectra and nonlinear optical properties of D‐π‐A azobenzene derivatives by changing the dipole moment and conjugation length: a theoretical study

The optical properties of several azobenzene derivatives were modulated by varying the dipole moments and conjugation lengths of the D‐π‐A systems. The relationship between the structure and absorption spectrum and polarizability was studied in the gas phase, THF and MeOH solutions, respectively, by using the density functional theory. The calculated absorption spectra and second‐order polarizabilities are in good agreement with the available experimental observations. In comparison with the D‐π‐A monomer, the H‐shaped D‐π‐A dimer almost doubles the dipole moments and hence increases the second‐order polarizabilities, without a significant shift in the maximum absorption bands. The addition of another azobenzol group between electron‐donating and ‐accepting groups increases the second‐order polarizabilities by 4–6 times, but leads to an evident red‐shift of about 65–80 nm in spectra. The relative second‐order polarizability of the halogen‐substituted derivatives is in the sequence of ? CF₃ > ? F > ? Cl > ? Br, without obvious substituent effects on the optical transparency. The D‐π‐A chromophores with the strong electron‐donating (amino) and ‐accepting (acetyl) substituent present the larger second‐order polarizabilities, at the cost of about 20 nm red‐shift of the maximum absorption lengths relative to the halogen‐substituted species. It is also demonstrated that both the linear and nonlinear optical properties augment with the increase in solvent polarity, accompanied by a red‐shift in the wavelengths of maximum absorption by about 18 and 23 nm, respectively, in THF and MeOH solutions. The changes in optical properties upon the structural modifications are further rationalized by the electronic structures of various H‐shaped dimers. Copyright © 2010 John Wiley & Sons, Ltd.     

What mesoscopic structures really “remember”: insufficiency of the open boundary approximation

We analyze the influence of contact electrons on quantum transport in a resonant-tunneling diode (RTD), using a many-body density matrix formalism for open systems. We explicitly relate the net current in the RTD to the memory-containing effective interaction between the RTD active region and the contacts. This effect can only be captured if the RTD active region is treated fully as a dynamically open system.