Diblock Copolymer Micelles with Ionic Amphiphilic Corona

Summary: Aqueous dispersions of diblock copolymer micelles with homogeneous hydrophobic core (polystyrene) and heterogeneous amphiphilic corona from ionic N-ethyl-4-vinylpyridinium bromide (EVP) and hydrophobic 4-vinylpyridine (4VP) units have been prepared at pH 9. The structure and dispersion stability of micelles as function of the ratio and distribution pattern of ionic and hydrophobic units in corona have been systematically studied by means of transmission electron microscopy, static and dynamic light scattering, UV-spectrophotometry techniques. It was shown that gradual decrease of the quantity of EVP-units in corona had no impact on micelle structure until its fraction was above 0.7. When EVP-fraction dropped below this point noticeable changes in micelle mass and dimensions were observed. In the case of random distribution of 4VP and EVP units these changes were moderate in value and jump-like in character. In the case of mictoarm (starlike) distribution of 4VP and EVP blocks changes were large in value and monotonous in character. The presented results may be of certain use for design of polymer micelles with nanosegregated corona.     

Hybrid Compound Block Copolymer Micelles Encapsulating Gold Nanoparticles

We report here on the formation of hybrid compound block copolymer micelles encapsulating gold nanoparticles, utilizing a direct and general preparation method. The giant hybrid compound micelles are structured with micelles of PS‐b‐P2VP with gold nanoparticles in their P2VP core and PI‐b‐PS chains as the outer part of the compound micelles. The gold nanoparticles were produced using gold ion‐loaded PS‐b‐P2VP micelles as a nanoreactor, in a PS selective solvent (toluene), by the subsequent reduction of gold ions. The synthesis of the gold nanoparticles was monitored by UV‐vis spectroscopy. The gold containing micelles were then encapsulated in larger micelles of PI‐b‐PS copolymer, by successive utilization of toluene and heptane with the intermediate evaporation of toluene. The nanoassembly of the compound materials comprised a PI corona and a PS compound core, with P2VP/Au⁰ domains, and was characterized using UV‐vis spectroscopy, dynamic light scattering and transmission electron microscopy.

     

Hairy Nanospheres by Gelation of Reactive Block Copolymer Micelles

Summary: A novel way to prepare polymer hair/polysilsesquioxane core hybrid nanospheres is presented based on a self‐assembly and gelation process of a reactive block copolymer, poly(ethylene oxide)‐block‐poly[3‐(trimethoxysilyl)propyl methacrylate] (PEO₁₁₃‐b‐PTMSPMA₂₀₆). Nanospheres of uniform size were obtained. Transmission electron microscopy (TEM), dynamic light scattering (DLS), and static light scattering (SLS) were employed to characterize the products.

Schematic of the PEO‐b‐PTMSPMA nanospheres formed here, the light gray part represents the PEO hairs, the dark parts are the polysilsesquioxane from the gelation of the PTMSPMA blocks of the self‐assembled sphere.     

Block Copolymer Micellar Nanoreactors for the Directed Synthesis of ZnO Nanoparticles

We report the simple one‐pot synthesis of size tunable zinc oxide nanoparticles (ZnO NPs) out of an organometallic ZnO precursor using the self‐assembly of solution phase polystyrene‐block‐poly(2‐vinylpyridine) micelles. The resulting hybrid material could be deposited on various substrates in a straightforward manner with the NPs showing size‐dependent absorption and photoluminescence due to the quantum‐size effect. We compare the results to the assembly of preformed NPs which are selectively incorporated in the poly(2‐vinylpyridine) core of the micelles due to the high affinity of ZnO to vinylpyridine.

     

Kinetics of Chain Exchange between Diblock Copolymer Micelles

Dissipative particle dynamics simulation is employed to study the chain exchange kinetics between micelles of diblock copolymer in aqueous solution via in silico hybridization method. One focus is placed on the effect of chain flexibility on the dynamic behavior by varying the spring constant in the bead‐spring model. The length ratio of hydrophilic to hydrophobic block is also varied. It is found that chain expulsion/insertion is the dominant mechanism in the chain exchange process. The most interesting finding is the multimodal relaxation behavior for the chain exchange and expulsion when the spring constant is small or the length ratio of hydrophilic to hydrophobic block is large. This phenomenon is due to an increase in size polydispersity of micelles with rising population of small aggregates/micelles, for which the exchange kinetics is faster. Micelles with larger aggregation numbers (>10) are found to follow single exponential relaxation kinetics.

     

Sphere‐to‐Rod Transition of Micelles formed by the Semicrystalline Polybutadiene‐block‐Poly(ethylene oxide) Block Copolymer in a Selective Solvent

We present a morphological study of the micellization of an asymmetric semicrystalline block copolymer, poly(butadiene)‐block‐poly(ethylene oxide), in the selective solvent n‐heptane. The molecular weights of the poly(butadiene) (PB) and poly(ethylene oxide) (PEO) blocks are 26 and 3.5 kg · mol⁻¹, respectively. In this solvent, micellization into a liquid PEO‐core and a corona of PB‐chains takes place at room temperature. Through a thermally controlled crystallization of the PEO core at −30 °C, spherical micelles with a crystalline PEO core and a PB corona are obtained. However, crystallization at much lower temperatures (−196 °C; liquid nitrogen) leads to the transition from spherical to rod‐like micelles. With time these rod‐like micelles aggregate and form long needles. Concomitantly, the degree of crystallinity of the PEO‐cores of the rod‐like micelles increases. The transition from a spherical to a rod‐like morphology can be explained by a decrease of solvent power of the solvent n‐heptane for the PB‐corona chains: n‐Heptane becomes a poor solvent at very low temperatures leading to a shrinking of the coronar chains. This favors the transition from spheres to a morphology with a smaller mean curvature, that is, to a cylindrical morphology.

     

A Supramolecularly Assisted Transformation of Block‐Copolymer Micelles into Nanotubes

Once around the block : Incorporation of a rigid hydrogen‐bonding benzamide unit, placed at the interface between two polymer blocks, in poly(ethylene glycol) (PEG)–(thio)urea–poly(L ‐lactide) (PLLA) block copolymers transforms the morphology of the block copolymers, from spherical micelles, as formed by PEG‐PLLA diblock copolymers, into nanotubes in solution.

     

“Raft” Formation by Two‐Dimensional Self‐Assembly of Block Copolymer Rod Micelles in Aqueous Solution

Block copolymers can form a broad range of self‐assembled aggregates. In solution, planar assemblies usually form closed structures such as vesicles; thus, free‐standing sheet formation can be challenging. While most polymer single crystals are planar, their growth usually occurs by uptake of individual chains. Here we report a novel lamella formation mechanism: core‐crystalline spherical micelles link up to form rods in solution, which then associate to yield planar arrays. For the system of poly(ethylene oxide)‐block‐polycaprolactone in water, co‐assembly with homopolycaprolactone can induce a series of morphological changes that yield either rods or lamellae. The underlying lamella formation mechanism was elucidated by electron microscopy, while light scattering was used to probe the kinetics. The hierarchical growth of lamellae from one‐dimensional rod subunits, which had been formed from spherical assemblies, is novel and controllable in terms of product size and aspect ratio.     

Bioaffinitive and Nanosized Polymeric Micelles Based on a Reactive Block Copolymer

Summary: Bio‐affinitive, nanosized polymeric micelles with glucosamine in their corona have a specific interaction with Concanavalin A. They are prepared by a substitution reaction of p‐nitrophenol groups in the poly(p‐nitrophenyl acrylate) (PNPA) corona of stable micelles with glucosamine. The nanosized, stable, and reactive micelles are formed by self‐assembly of the diblock copolymer, poly(p‐nitrophenyl acrylate)‐block‐polystyrene (PNPA‐b‐PSt) in nitromethane, followed by a shell cross‐linking reaction. This method may be useful in the preparation of targeted drugs.

A schematic of the formation of stable glucosamine‐carrying micelles from the diblock copolymer, PNPA‐b‐PSt.     

Reversible Metallo‐Supramolecular Block Copolymer Micelles Containing a Soft Core

An amphiphilic metallo‐supramolecular poly(ethylene‐co‐butylene)‐block‐poly(ethylene oxide) diblock copolymer containing a bis(2,2′:6′,2″‐terpyridine)ruthenium(II) complex as a supramolecular connection between the two constituting blocks was used to prepare stable aqueous micelles. The micelles were characterized by dynamic light scattering and atomic force microscopy. Individual micelles were observed together with aggregates of micelles. Only the addition of a large excess of competitive ligand caused the cleavage of the very stable ruthenium complex.     

Minocycline Block Copolymer Micelles and their Anti‐Inflammatory Effects on Microglia

MH, a semisynthetic tetracycline antibiotic with promising neuroprotective properties, was encapsulated into PIC micelles of CMD‐PEG as a potential new formulation of MH for the treatment of neuroinflammatory diseases. PIC micelles were prepared by mixing solutions of a Ca²⁺/MH chelate and CMD‐PEG copolymer in a Tris‐HCl buffer. Light scattering and ¹H NMR studies confirmed that Ca²⁺/MH/CMD‐PEG core‐corona micelles form at charge neutrality having a hydrodynamic radius ≈100 nm and incorporating ≈ 50 wt.‐% MH. MH entrapment in the micelles core sustained its release for up to 24 h under physiological conditions. The micelles protected the drug against degradation in aqueous solutions at room temperature and at 37 °C in the presence of FBS. The micelles were stable in aqueous solution for up to one month, after freeze drying and in the presence of FBS and BSA. CMD‐PEG copolymers did not induce cytotoxicity in human hepatocytes and murine microglia (N9) in concentrations as high as 15 mg·mL^?1 after incubation for 24 h. MH micelles were able to reduce the inflammation in murine microglia (N9) activated by LPS. These results strongly suggest that MH PIC micelles can be useful in the treatment of neuroinflammatory disorders.

     

ABC Triblock Copolymer Micelles: Spherical Versus Worm‐Like Micelles Depending on the Preparation Method

Well‐defined ABC triblock copolymers based on two hydrophilic blocks, A and C, and a hydrophobic block B are synthesized and their self‐assembly behavior is investigated. Interestingly, at the same solvent, concentration, pH, and temperature, different shape micelles are observed, spherical and worm‐like micelles, depending on the preparation method. Specifically, spherical micelles are observed with bulk rehydration while both spherical and worm‐like micelles are observed with film rehydration.

     

Well‐Organized CdS/C60 in Block Copolymer Micellar Cores

CdS nanoparticles of 4.5 nm diameter were synthesized in poly(2‐vinylpyridine) micellar cores which were obtained by solvating a polystyrene‐block‐poly(2‐vinylpyridine) block copolymer in polystyrene‐selective toluene. Then, a C₆₀‐toluene solution was dispersed into the CdS micelle solution with stirring. This led to the well‐defined organization of two different nanoparticles; specifically: a CdS NP decorated by several/dozens of C₆₀ molecules, because C₆₀ molecules were strongly coordinated with pyridine molecules in the micellar cores by charge‐transfer complexation C–P2VP^δ+. A harmoniously organized CdS/C₆₀ micellar structure was clearly verified by transmission electron microscopy. Fluorescent quenching of CdS nanoparticles, which was strongly affected by neighboring C₆₀ molecules, was observed.

     

Coassembly of Metal and Titanium Dioxide Nanocrystals Directed by Monolayered Block Copolymer Inverse Micelles for Enhanced Photocatalytic Performance

Functional nanostructures of self‐assembled block copolymers (BCPs) incorporated with various inorganic nanomaterials have received considerable attention on account of their many potential applications. Here we demonstrate the two‐dimensional self‐assembly of anisotropic titanium dioxide (TiO₂) nanocrystals (NCs) and metal nanoparticles (NPs) directed by monolayered poly(styrene)‐block‐poly(4‐vinylpyridine) (PS‐b‐P4VP) copolymer inverse micelles. The independent position‐selective assembly of TiO₂ NCs and silver nanoparticles (AgNPs) preferentially in the intermicelle corona regions and the core of micelles, respectively, for instance, was accomplished by spin‐coating a mixture solution of PS‐b‐P4VP and ex situ synthesized TiO₂ NCs, followed by the reduction of Ag salts coordinated in the cores of micelles into AgNPs. Hydrophobic TiO₂ NCs with a diameter and length of approximately 3 nm and 20–30 nm, respectively, were preferentially sequestered in the intermicelle nonpolar PS corona regions energetically favorable with the minimum entropic packing penalty. Subsequent high‐temperature annealing at 550 °C not only effectively removed the block copolymer but also transformed the TiO₂ NCs into connected nanoparticles, thus leading to a two‐dimensionally ordered TiO₂ network in which AgNPs were also self‐organized. The enhanced photocatalytic activity of the AgNP‐decorated TiO₂ networks by approximately 27 and 44 % over that of Ag‐free TiO₂ networks and randomly deposited TiO₂ nanoparticles, respectively, was confirmed by the UV degradation property of methylene blue.     

Highly Ordered Hexagonal Arrays of Hybridized Micelles from Bimodal Self‐Assemblies of Diblock Copolymer Micelles

We demonstrate the formation of highly ordered hexagonal arrays of hybridized polystyrene–poly(4‐vinyl pyridine), PS–PVP, micelles with controllable size by solvent annealing techniques. Because the formation of hybridized micelles was prohibited in the mixture solutions of two different‐sized PS–PVP micelles, single‐layered films with bimodal self‐assemblies of small and large micelles were fabricated from the mixture solutions by adjusting their mixing ratios. When the single‐layered films were solvent annealed by saturated vapor of tetrahydrofuran (THF), on the other hand, small and large PS–PVP micelles in the bimodal self‐assemblies merged together to form hybridized micelles. In addition, the hybridized micelles arranged themselves in a highly ordered hexagonal array, the diameter and center‐to‐center distance of which were precisely adjusted by varying the mixing ratio of small to large micelles in the bimodal assemblies.

     

Dual Responsive Block Copolymer Micelles Functionalized by NIPAM and Azobenzene

A novel amphiphilic diblock copolymer composed of a hydrophilic poly(ethylene oxide) block and a hydrophobic block copolymerized by azobenzene‐containing methacrylate and N‐isopropylacrylamide was synthesized using ATRP. The polymer micelles showed dual responsiveness to heat and light. The size of the micelles was dependent on temperature and the encapsulated substance in the hydrophobic cores was released during heating and cooling processes. The hydrophobicity of the micellar cores appeared as a reversible change in response to light with neither disruption of the micelles nor leakage of the encapsulated substance while H‐aggregation of the azobenzene moieties was detected.

     

Dimensional Control of Block Copolymer Nanofibers with a π‐Conjugated Core: Crystallization‐Driven Solution Self‐Assembly of Amphiphilic Poly(3‐hexylthiophene)‐b‐poly(2‐vinylpyridine)

With the aim of accessing colloidally stable, fiberlike, π‐conjugated nanostructures of controlled length, we have studied the solution self‐assembly of two asymmetric crystalline–coil, regioregular poly(3‐hexylthiophene)‐b‐poly(2‐vinylpyridine) (P3HT‐b‐P2VP) diblock copolymers, P3HT₂₃‐b‐P2VP₁₁₅ (block ratio=1:5) and P3HT₄₄‐b‐P2VP₁₁₅ (block ratio=ca. 1:3). The self‐assembly studies were performed under a variety of solvent conditions that were selective for the P2VP block. The block copolymers were prepared by using Cu‐catalyzed azide–alkyne cycloaddition reactions of azide‐terminated P2VP and alkyne end‐functionalized P3HT homopolymers. When the block copolymers were self‐assembled in a solution of a 50 % (v/v) mixture of THF (a good solvent for both blocks) and an alcohol (a selective solvent for the P2VP block) by means of the slow evaporation of the common solvent; fiberlike micelles with a P3HT core and a P2VP corona were observed by transmission electron microscopy (TEM). The average lengths of the micelles were found to increase as the length of the hydrocarbon chain increased in the P2VP‐selective alcoholic solvent (MeOH<iPrOH<nBuOH). Very long (>3 μm) fiberlike micelles were prepared by the dialysis of solutions of the block copolymers in THF against iPrOH. Furthermore the widths of the fibers were dependent on the degree of polymerization of the chain‐extended P3HT blocks. The crystallinity and π‐conjugated nature of the P3HT core in the fiberlike micelles was confirmed by a combination of UV/Vis spectroscopy, photoluminescence (PL) measurements, and wide‐angle X‐ray scattering (WAXS). Intense sonication (iPrOH, 1 h, 0 °C) of the fiberlike micelles formed by P3HT₂₃‐b‐P2VP₁₁₅ resulted in small (ca. 25 nm long) stublike fragments that were subsequently used as initiators in seeded growth experiments. Addition of P3HT₂₃‐b‐P2VP₁₁₅ unimers to the seeds allowed the preparation of fiberlike micelles with narrow length distributions (L_w/L_n <1.11) and lengths from about 100‐300 nm, that were dependent on the unimer‐to‐seed micelle ratio.