Summary: Nitroxide‐mediated polymerization of styrene in a continuous tubular reactor has been demonstrated for the first time. The polymerization kinetics in the tubular reactor are similar to those in a batch reactor. The number average molecular weight increases linearly with conversion, and chain extension experiments were successful, indicating that the living nature of the polymerization is maintained in the tubular reactor.
Evolution of molecular weight as measured by GPC for chain‐extended latex in continuous tubular reactor. 相似文献
Starting in biochemistry and pharmaceutical chemistry, combinatorial methods, automated synthesis and high‐throughput characterization are being further developed for organic synthesis and polymer research. The development is strongly driven by the achievements in biochemistry and pharmaceutical chemistry and the need to minimize the time‐to‐market for novel polymeric products. The success of high‐throughput methodologies in polymer science is partially limited by the commercially available hardware (synthesizers, workstations, robots, online‐characterization instruments, etc.) and software. A short overview of commercially available equipment for polymer research is provided in this Review.
This review article describes the preparation of polymer brushes by nitroxide‐mediated radical polymerization using either the ‘grafting to’ or the ‘grafting from’ approach. The use of TEMPO as a classical initiator is intensively described. More sophisticated nitroxides are also included in the discussion. Brush formation on flat surfaces such as wafers and also on particles is reported. Finally, some applications of polymer brushes are presented.
Organic π‐conjugated polymers have emerged as one of the most fascinating classes of materials as they have found utility in a host of plastic electronics technologies. The distance between π‐systems and their relative orientation dictate energy/charge transfer, conductivity, and photophysical properties of these materials in bulk. This Feature Article discusses π‐conjugated polymers and model compounds in which specific inter‐π‐system interactions are covalently enforced and the effect that the scaffolding has on optoelectronic properties.
The preparation of a bisphenol‐A carbonate copolymer, containing Cu‐diimine units with nonlinear optical (NLO) properties, and its MALDI‐TOF mass spectrometric characterization are reported. Contrary to the usual synthetic method, NLO groups were inserted directly into a commercial polycarbonate by prolonged heating at 250 °C. This innovative procedure allows to obtain a Cu/diimine‐containing polymer of high molecular weight.
POSS‐functionalized polyisobutylenes (PIBs) were synthesized by carbocationic polymerization using an epoxy‐POSS/TiCl4 initiating system in hexane/methyl chloride (60:40 v/v) solvent mixture at −80 °C. 1H NMR spectroscopy verified the incorporation of one epoxy‐POSS per polymer chain. Light scattering and TEM analysis demonstrated the formation of 50–100 nm sized aggregates and micron‐sized clusters.
Here, we report the use of fluorescently labelled proteins to study protein adsorption to microarrayed synthetic polymers for the first time, indicating that this method is appropriate for the study of protein adsorption on these arrays. To investigate protein adhesion directly we use atomic force microscopy (AFM) to measure the force of adhesion between a protein‐coated probe and the arrayed polymers. Both approaches show promise as methods for screening protein interactions with polymers in a microarray format. Comparison of these very different measures of protein–surface interactions indicate a good correlation.
The importance of taking into account the principle of microscopic reversibility in the analysis of complex copolymerization systems is demonstrated. The analysis of a reversible copolymerization system in which segmental exchange is possible from the point of view of the reaction microreversibility proves that hetero‐reshuffling rate constants depend on homo‐reshuffling rate constants and copolymerization thermodynamics.
This paper describes a poly(dimethylsiloxane) (PDMS)‐based microfluidic platform for constructing the phase diagram of poly(N‐isopropyl acrylamide) (PNIPAM) in aqueous solution. The PNIPAM solution was delivered into a nanoliter chamber through the main microchannel. An osmotic pressure difference was established between the chamber and the control microchannel by flowing a high‐concentration salt solution in the control microchannel. Controlled evaporation of water resulted in increasing concentration of PNIPAM. A phase diagram of PNIPAM was built by measuring the cloud points at different concentrations, with a minimum point at ≈40 wt.‐%. The microfluidic platform has the advantages of low sample consumption and rapid heat exchange rates, and allows studying viscous polymer solution.
4‐Vinylbenzoyl azide was synthesized from p‐vinylbenzoic acid and polymerized by free radical polymerization. The obtained polymer contained acyl azide groups which were thermally transformed to the corresponding isocyanato groups. Reactions on these polymers with ethanol, hydroxyethyl methacrylate and 1‐pyrenebutanol proceeded quantitatively. Time‐resolved FT‐IR studies of the reactions with ethanol were carried out by varying the concentration and temperature. The effect of the solvent polarity on the Curtius rearrangement was investigated.
A natural and synthetic layered silicate (LS) was modified with trihexyltetradecyl‐phosphonium tetrafluoroborate (an ionic liquid) via a cationic exchange reacation. The exchange reaction and loading of modifier was investigated using a combination of WAXD, inductively coupled plasma‐optical emmission spectroscopy (ICP‐OES) and thermogravimetric analysis (TGA). The thermal stability of the modified LS was enhanced by up to 150 °C, when compared with conventional quaternary ammonium cations, making melt mixing of such modified nanoclays possible with poly(ethylene‐terephthalate) (PET).
