Low‐molecular weight amphiphilic diblock copolymers, polystyrene‐block‐poly (2‐vinylpyridine) (PS‐b‐P2VP), and (P2VP‐b‐PS) with different block ratios were synthesized for the first time via organotellurium‐mediated living radical polymerization (TERP). For both the homo‐ and block copolymerizations, good agreement between the theoretical, and experimental molecular weights was found with nearly 100% yield in every case. The molecular weight distribution for all the samples ranged between 1.10 and 1.24, which is well below the theoretical lower limit of 1.50 for a conventional free radical polymerization. Furthermore, a very simple approach to producing highly dense arrays of titania nanoparticles (TiO2) is presented using a site‐selective reaction of titanium tetraisopropoxide within the P2VP domains of micellar film of P2VP‐b‐PS in toluene through the sol–gel method.
Complex micelles were obtained from PS‐b‐PNIPAM‐b‐PAA micelles and PEG‐b‐P4VP block copolymers via the strong electrostatic interaction and hydrogen bonding between PAA and P4VP blocks in water. The PS block formed the core and the PAA/P4VP complex shell functioned as a semi‐permeable membrane which could control the permeation of small molecules. Between the core and shell, the large fluid‐filled space that was formed with the thermoresponsive PNIPAM gel could retain the loaded drug for a long period of time. With increasing temperature, the shrinkage of the PNIPAM coils pumped the drug out of the complex micelles. The complex micelles functioned as a contractive “nanopump”, which could potentially be applied as a thermosensitive controlled release system.
We report here on the formation of hybrid compound block copolymer micelles encapsulating gold nanoparticles, utilizing a direct and general preparation method. The giant hybrid compound micelles are structured with micelles of PS‐b‐P2VP with gold nanoparticles in their P2VP core and PI‐b‐PS chains as the outer part of the compound micelles. The gold nanoparticles were produced using gold ion‐loaded PS‐b‐P2VP micelles as a nanoreactor, in a PS selective solvent (toluene), by the subsequent reduction of gold ions. The synthesis of the gold nanoparticles was monitored by UV‐vis spectroscopy. The gold containing micelles were then encapsulated in larger micelles of PI‐b‐PS copolymer, by successive utilization of toluene and heptane with the intermediate evaporation of toluene. The nanoassembly of the compound materials comprised a PI corona and a PS compound core, with P2VP/Au0 domains, and was characterized using UV‐vis spectroscopy, dynamic light scattering and transmission electron microscopy.
The mixed Langmuir monolayers and Langmuir–Blodgett (LB) films of homo‐polystyrene (h‐PS) and the diblock copolymer polystyrene‐block‐poly(2‐vinylpyridine) (PS‐b‐P2VP) have been characterized by the Langmuir monolayer technique and tapping mode atomic force microscopy (AFM), respectively. When the content of h‐PS is below 80 wt.‐%, the mixed LB films of h‐PS/PS‐b‐P2VP mainly exhibit isolated circular nanoaggregates. With a further increase of the h‐PS content (80–95%), however, highly uniform and stable necklace‐network structures are observed in the mixed LB films.
PS‐b‐PAA spherical micelles with a liquid core and a PAA shell are prepared with the assistance of 1,2‐dichloroethane. During the process of adding a mixture of PNIPAM‐b‐P4VP and PEG‐b‐P4VP, multi‐layered micelles with a mixed corona that consists of both PNIPAM and PEG chains are constructed through the electrostatic interaction and hydrogen bonding between the PAA block and the P4VP block. When heating above the LCST, the PNIPAM chains collapse onto the PAA/P4VP complex layer while the PEG chains still stretch into the solution through the collapsed PNIPAM layer, which leads to the formation of hydrophilic channels around the PEG chains. The ibuprofen encapsulated in the hollow space can diffuse through the channels and its release rate can be controlled by changing the ratio of PEG chains to PNIPAM chains in the corona.
We report that the nanostructures of poly(styrene‐block‐4‐vinylpyridine) block copolymer (PS‐b‐P4VP) thin film on a wafer substrate can be re‐assembled by sequential vapor treatment using selected solvents. Metal or other inorganic nanoparticles that were randomly pre‐loaded inside or on the surface of PS‐b‐P4VP thin film could be pulled to the rim of PS and P4VP along with the movements of PS and P4VP blocks during the treatment. As a result, the patterned polymeric or inorganic/polymer composite nanoisland and nanoring arrays were fabricated.
A variety of sub‐10 nm nanoparticles are successfully prepared by crosslinking of polystyrene‐b‐poly(1,3‐butadiene) (PS‐b‐PB) and polystyrene‐b‐poly(4‐vinyl pyridine) (PS‐b‐P4VP) block copolymer micelles and inverse micelles. Among them, the core‐crosslinked PS‐b‐PB micelles can self‐assemble into ultrathin (< 10 nm) macroporous (pore size <1 µm) membranes in a facile way, i.e., by simply drop‐coating the particle solution onto a mica surface. No continuous/porous membranes are produced from shell‐crosslinked PS‐b‐PB micelles and both forms of PS‐b‐P4VP micelles. This suggests that the unique structure of the block copolymer precursor, including the very flexible core‐forming block and the glassy corona‐forming block and the specific block length ratio, directly determines the formation of the macroporous membrane.
A chiral polymeric micelle is described, formed from the self‐assembly of TPPS and PEG114‐b‐P(4VP)38 in aqueous media based on their electrostatic interaction. The self‐assembly behavior is studied by DLS, SLS, TEM, UV‐vis absorption spectroscopy, and CD spectroscopy. The experimental results indicate that the resultant hybrid spherical micelles with a hybrid P(4VP)/TPPS core and a PEG shell show chiral signatures. In addition, the chiral micelles have a large dimension and biphasic segregated structure because of the formation of H‐aggregates and J‐aggregates in the micellar core.
This paper describes a new approach towards preparing self‐assembled hydrogen‐bonded complexes that have vesicle and patched spherical structures from two species of block copolymer in non‐selective solvents. The assembly of vesicles from the intermolecular complex formed after mixing polystyrene‐block‐poly(4‐vinyl phenol) (PS‐b‐PVPh) with poly(methyl methacrylate)‐block‐poly(4‐vinylpyridine) (PMMA‐b‐P4VP) in tetrahydrofuran (THF) is driven by strong hydrogen bonding between the complementary binding sites on the PVPh and P4VP blocks. In contrast, well‐defined patched spherical micelles form after blending PS‐b‐PVPh with PMMA‐b‐P4VP in N,N‐dimethylformamide (DMF): weaker hydrogen bonds form between the PVPh and P4VP blocks in DMF, relative to those in THF, which results in the formation of spherical micelles that have compartmentalized coronas that consist of PS and PMMA blocks.
CdS nanoparticles of 4.5 nm diameter were synthesized in poly(2‐vinylpyridine) micellar cores which were obtained by solvating a polystyrene‐block‐poly(2‐vinylpyridine) block copolymer in polystyrene‐selective toluene. Then, a C60‐toluene solution was dispersed into the CdS micelle solution with stirring. This led to the well‐defined organization of two different nanoparticles; specifically: a CdS NP decorated by several/dozens of C60 molecules, because C60 molecules were strongly coordinated with pyridine molecules in the micellar cores by charge‐transfer complexation C–P2VPδ+. A harmoniously organized CdS/C60 micellar structure was clearly verified by transmission electron microscopy. Fluorescent quenching of CdS nanoparticles, which was strongly affected by neighboring C60 molecules, was observed.
Summary: Monodisperse thermosensitive PS‐NIPA core‐shell particles composed of a PS core and a cross‐linked PNIPA shell can be successfully synthesized by a novel method: photoemulsion polymerization. Cryo‐TEM images indicate clearly the core‐shell morphology of the PS‐NIPA particles: A homogeneous regular PNIPA shell has been affixed on the spherical PS core. DLS measurements indicate that the obtained PS‐NIPA latex particles are thermosensitive. The shell of PNIPA networks with different cross‐linking densities can shrink and re‐swell with temperature and the volume transition temperature is around 32 °C in all cases.
Cryo‐TEM image of PS‐NIPA core‐shell particles. 相似文献
Hierarchical nanoporous structures are fabricated by adsorption of micelles of diblock copolymer‐templated Au‐nanoparticles onto a hydrophilic solid substrate. Gold nanoparticles are prepared using micelles (19 nm) of polystyrene‐block‐poly(4‐vinylpyridine) (PS‐b‐P4VP) as nanoreactors. Deposition of thin films of the micellar solution, modified with a non‐selective solvent (THF), on hydrophilic surfaces leads to the formation of hierarchical nanoporous morphologies. The thin films exhibit two different pore diameters and a total pore density of 15 × 108 holes per cm2. The structure was analyzed in terms of topography and chemical composition using AFM, TEM and XPS measurements. The PS‐b‐P4VP template was subsequently removed by oxygen plasma etching, to leave behind metallic nanopores that mimic the original thin film morphology.
Summary: A polymeric supramolecule consisting of symmetric polystyrene‐block‐poly(4‐vinylpyridine) (PS‐b‐P4VP), dodecylbenzenesulfonic acid (DBSA), and 3‐pentadecylphenol (PDP) was formed by proton transfer and hydrogen bonding. The surface morphology of a thin film of the polymeric supramolecule has been investigated. The spherical PS microdomains embedded in a P4VP(DBSA)1.0(PDP)1.0 matrix are observed for the as‐cast film because the weight fraction, fcomb, of the P4VP(DBSA)1.0(PDP)1.0 blocks is much higher than that of PS as a result of the non‐covalent interactions of P4VP and DBSA and DBSA and PDP. Upon annealing the PS‐b‐P4VP(1:1)(DBSA)1.0(PDP)1.0 film at high temperatures, the hydrogen bonding between the DBSA and PDP diminishes, which leads to a change of overall morphology from an ordered sphere to a pitted structure.
AFM topographic image of a PS‐b‐P4VP(1:1)(DBSA)1.0(PDP)1.0 thin film. 相似文献
Au nanoparticles (NPs) and polymer composite particles with phase‐separation structures were prepared based on phase separation structures. Au NPs were successfully synthesized in amphiphilic block‐copolymer micelles, and then composite particles were formed by a simple solvent evaporation process from Au NPs and polymer solution. The phase separated structures (Janus and Core‐shell) were controlled by changing the combination of polymers having differing hydrophobicity.
Summary: We report the multiple morphologies and their transformation of polystyrene‐block‐poly(4‐vinylpyridine) (PS‐b‐P4VP) in low‐alkanol solvents. In order to improve the solubility of polystyrene block in alcohol solvents, the solution of block copolymer sample was treated at a higher temperature, and then the influence of rate of decreasing temperature on multiple morphologies (including spheres, rods, vesicles, porous vesicles, large compound vesicles, and large compound micelles) was observed. The transformation of spheres to rods, to tyre‐shaped large compound micelles, and to sphere‐shaped large compound micelles was also realized. The formation mechanisms of the multiple morphologies and their transformation are discussed briefly.
Aggregates of PS‐P4VP formed in butanol by quenching from 110 °C to room temperature. 相似文献
Summary: A simple route to an ordered array of metal/semiconductor oxide composite nanodots is presented. Micellar monolayer films of polystyrene‐block‐poly(2‐vinyl pyridine) (PS‐b‐P2VP) loaded with HAuCl4 in the P2VP nanodomains are used as templates. TiO2 is generated selectively within the polar P2VP domains of PS‐b‐P2VP/HAuCl4 films by chemical vapor deposition of TiCl4. Subsequent removal of the organic matrix by oxygen plasma or UV light leads to an array of Au/TiO2 composite nanoparticles on the substrate surface.
Schematic illustration of the process to fabricate an array of Au/titania composite nanodots. 相似文献
New amphiphilic graft copolymers that have a poly(ε‐caprolactone) (PCL) biodegradable hydrophobic backbone and poly(4‐vinylpyridine) (P4VP) or poly(2‐(N,N‐dimethylamino)ethyl methacrylate) (PDMAEMA) hydrophilic side chains have been prepared by anionic polymerization of the corresponding 4VP and DMAEMA monomers using a PCL‐based macropolycarbanion as initiator. The water solubility of these amphiphilic copolymers is improved by quaternization, which leads to fully water‐soluble cationic copolymers that give micellar aggregates in deionized water with diameters ranging from 65 to 125 nm. In addition, to improve the hydrophilicity of PCL‐g‐P4VP, grafting of poly(ethylene glycol) (PEG) segments has been carried out to give a water‐soluble double grafted PCL‐g‐(P4VP;PEG) terpolymer.
Micelles made from linear polystyrene‐block‐polyisoprene (PS/PI) in decane are spherical. The differences in the structure of micelles made from linear and cyclic PS/PI were investigated using small‐angle X‐ray scattering at rest and under shear flow. The effect of shear revealed that micelles made from cyclic copolymer chains have an elongated shape, which was confirmed by transmission electron microscopy. The cyclization of diblock copolymer chains is thus a new method to control the micellar morphology.
A strain‐induced microphase morphology has been established by the melt drawing process in a high molecular weight asymmetric polystyrene‐block‐poly(vinyl‐2‐pyridine) (PS‐b‐P2VP) diblock copolymer. For the first time to the best knowledge of the authors, the melt drawing process has been applied to block copolymers to produce free‐standing, ultrathin block copolymer films with a thickness of ≈100 nm. Intriguingly, during the melt drawing of the polymer a global strain‐induced unidirectional order of the microphase separated needle‐like domains of the block copolymer was generated. This morphology consists of a PS matrix with embedded highly oriented P2VP needle‐like domains oriented parallel to the drawing direction. The needle‐like morphology is explained by a simplified extended chain model of the diblock copolymer chains. Annealing of the films leads to a transition from the strain‐induced needle‐like morphology toward the quasi‐equilibrium sphere‐like morphology.
Supramolecular complexes of a poly(tert‐butoxystyrene)‐block‐polystyrene‐block‐poly(4‐vinylpyridine) triblock copolymers and less than stoichiometric amounts of pentadecylphenol (PDP) are shown to self‐assemble into a core–shell gyroid morphology with the core channels formed by the hydrogen‐bonded P4VP(PDP)complexes. After structure formation, PDP was removed using a simple washing procedure, resulting in well‐ordered nanoporous films that were used as templates for nickel plating.
