共查询到20条相似文献,搜索用时 609 毫秒
1.
Karoline Eder Christian G. Huber Michael R. Buchmeiser 《Macromolecular rapid communications》2007,28(20):2029-2032
Ring‐opening metathesis polymerization (ROMP) was used for the synthesis of monolithic capillary columns with inner diameters of 200 µm. The resulting polymeric monoliths were characterized by inverse size‐exclusion chromatography (ISEC). Surface functionalization was carried out in situ using 2‐(N,N‐dimethylaminoethyl)norborn‐5‐ene‐2‐ylcarboxylic amide ( 1 ). The resulting functionalized monoliths were successfully used in anion‐exchange chromatography of oligodeoxynucleotides.
2.
Mohamed Guerrouache Marie‐Claude Millot Benjamin Carbonnier 《Macromolecular rapid communications》2009,30(2):109-113
Macroporous cross‐linked organic polymer based on N‐acryloxysuccinimide (NAS) and ethylene dimethacrylate (EDMA) was prepared inside 75 µm id fused silica capillary as a functionalizable monolithic stationary phase for chromatographic applications. Succinimide groups on the monolith surface provide reactive sites able to react readily through standard electrophile–nucleophile chemistry. Propargylamine was used to prepare alkyne functionalized poly(NAS‐co‐EDMA). Onto this azido‐reactive polymer surface was grafted β‐cyclodextrin (CD) via a triazole ring utilizing the copper(I)‐catalyzed 1,3‐dipolar cyclo‐addition reaction. Chemical characterization was performed in situ after each synthetic step by means of Raman spectroscopy. Good enantioseparations of flavanone enantiomers, chosen as test chiral compound, were achieved under reversed phase conditions by both capillary electrochromatography and nano‐liquid chromatography (nano‐LC) techniques. These results demonstrate the potentiality and usefulness of click chemistry in the preparation of β‐CD containing chiral organic polymer monolith.
3.
Monodisperse poly(D ,L ‐lactide) (PDLLA) microspheres have been prepared by dispersion polymerization of D ,L ‐lactide with a synthetic polymeric stabilizer. The polymerization is carried out in xylene/heptane (1:2, v/v) at 368 K for 3 h with poly[(dodecyl methacrylate)‐co‐(2‐hydroxyethyl methacrylate)] (P(DMA‐co‐HEMA)). P(DMA‐co‐HEMA) has hydroxy groups as an initiation group for pseudoanionic dispersion polymerization. The particle diameter and the coefficient of variation concerning the diameter distribution of the obtained PDLLA microspheres are 3.9 µm and 4.3%, respectively. In addition, from the results of dynamic light scattering measurements, it is found that P(DMA‐co‐HEMA) and the PDLLA‐grafted copolymer form a micellar structure in solution.
4.
A versatile approach to fabricate monodisperse poly[styrene‐co‐(divinyl benzene)] (PS‐co‐DVB) microcapsules that contain a single gold nanoparticle (AuNP) has been demonstrated. Using the PS‐co‐DVB microcapsule as a microreactor, aqueous HAuCl4 and NaBH4 solutions are subsequently infiltrated. The size of the resulting AuNP inside of the PS‐co‐DVB microcapsules is easily tunable by controlling the repeated infiltration cycles of aqueous HAuCl4 and NaBH4. PS‐co‐DVB microcapsules that contain a single silver and palladium nanoparticle are also obtained by following a similar protocol.
5.
Antje Britze Katrin Moosmann Evelin Jhne Hans‐Jürgen Adler Dirk Kuckling 《Macromolecular rapid communications》2006,27(22):1906-1912
Summary: Phosphonate groups were introduced into block copolymers of styrene derivatives either as single end‐groups or as small blocks using nitroxide‐mediated radical polymerization. In order to combine the hydrophobic and hydrophilic segments, block copolymers with N,N‐dimethyl acrylamide were synthesized. After hydrolysis to phosphonic acid groups, adsorption of the polymer onto metal oxides was possible.
6.
Novel linear poly(NIPA‐co‐CL) copolymers have been synthesized by radical copolymerization of N‐isopropylacrylamide (NIPA) and 2‐methylene‐1,3‐dioxepane (MDO). The structure of copolymers was confirmed by 1H NMR and IR spectroscopy. Cross‐linked poly(NIPA‐co‐CL) hydrogels have also been prepared in toluene using N,N′‐methylenebisacrylamide as cross‐linking agent. The hydrogels thus obtained exhibit good temperature response and are biodegradable in the presence of proteinase K.
7.
Wei Su Xiao‐hua Luo Hua‐fen Wang Lei Li Jun Feng Xian‐Zheng Zhang Ren‐xi Zhuo 《Macromolecular rapid communications》2011,32(4):390-396
We herein develop a facile catalyst‐free method to prepare hyperbranched hydroxyl‐enriched aliphatic polycarbonate according to SCROP strategy. PEG‐attached multiarm hyperbranched copolymer HEHDO‐star‐mPEG was further designed. It was found that HEHDO‐star‐mPEG can self‐assemble into supramolecular multimolecular micelles in water. HEHDO‐star‐mPEG micelle showed excellent stability with respect to micellar size upon dilution, and displayed good cell‐biocompatibility. An anticancer drug of doxorubicin with hydrogen‐bonding functionality was incorporated into obtained micelles to establish a drug delivery system model. A high drug‐loading content as well as sustained release pattern for HEHDO‐star‐mPEG based delivery system was achieved.
8.
Zicheng Zuo Yanbing Guo Yuliang Li Jing Lv Huibiao Liu Jialiang Xu Yongjun Li 《Macromolecular rapid communications》2009,30(22):1940-1944
Large scale of well‐ordered macroporous π‐conjugated polymer monoliths have been successfully prepared through a new approach using micrometer‐sized naphthalene crystals as templates. The macroporous monoliths of poly(p‐phenylenevinylene) (PPV) and poly(p‐phenyleneethynylene) (PPE) grew along the unidirectional freezing direction inside the template naphthalene crystals which lead to the formation of controlling morphologies and homogeneous diameters. The polymer monoliths show straight and lamella macroporous structures. The diameters of pores and the thickness of pore walls can be controlled by tuning the freezing temperature.
9.
Himabindu Nandivada Hsien‐Yeh Chen Joerg Lahann 《Macromolecular rapid communications》2005,26(22):1794-1799
Summary: The vapor‐based synthesis and characterization of a reactive polymer, poly[(4‐formyl‐p‐xylylene)‐co‐(p‐xylylene)] ( 1 ), have been reported. The reactive polymer coating enables the immobilization of oligosaccharides via the chemoselective aldehyde‐hydrazide coupling reaction.
10.
Haiqing Hu Chuanbo Chong Aihua He Chenggui Zhang Guoqiang Fan Jin‐Yong Dong Charles C. Han 《Macromolecular rapid communications》2005,26(12):973-978
Summary: The phase behavior of poly(ethylene‐co‐styrene) (PES) and poly(ethylene‐co‐butene) (PEB) blends has been studied. A closed‐loop phase diagram was clearly observed in this weakly interacting system as the styrene content in the PES decreased to about 1 mol‐%. At higher styrene contents, the phase loop starts to interplay with the crystallization transformation at lower temperatures.
11.
Guoqin Liu Chunlong Guan Hesheng Xia Fuquan Guo Xiaobin Ding Yuxing Peng 《Macromolecular rapid communications》2006,27(14):1100-1104
Summary: Due to a large difference in storage modulus below and above the glass transition temperature, a novel shape‐memory poly[(methyl methacrylate)‐co‐(N‐vinyl‐2‐pyrrolidone)]/poly(ethylene glycol) semi‐interpenetrating polymer networks structure was synthesized, which is stabilized by hydrogen‐bonding interactions. The recovery ratio of these polymers could reach 99%. In such a system the maximum molecular weight of PEG required for the semi‐IPNs formation reaches 1 000.
12.
Emmanuel Pouget Erlea Holgado Garcia Franois Ganachaud 《Macromolecular rapid communications》2008,29(5):425-430
The synthesis of P(VA‐co‐VAc)‐graft‐PDMS copolymers has been achieved in microsuspension by direct reaction between an epoxy‐terminated PDMS and some pendant alcohol groups in P(VA‐co‐VAc). In this synthesis, the copolymer is used both as dispersant and reactant. The hydrophilic/hydrophobic character of the final material can be varied at will by incorporating various contents of epoxy‐functionalized PDMS through optimized reaction conditions. The final composition was determined by TGA and 1H NMR. Products prepared from monofunctional PDMS were easily redispersed in water whereas a film of crosslinked materials, arising from difunctional PDMS, showed the best waterproofing as shown by contact angle analysis.
13.
Yang Dong Ying Ma Tianyou Zhai Fugang Shen Yi Zeng Hongbing Fu Jiannian Yao 《Macromolecular rapid communications》2007,28(24):2339-2345
Well‐dispersed silver nanoparticles were successfully fabricated within poly[(N‐isopropylacrylamide)‐co‐(acrylic acid)] [P(NIPAM‐co‐AA)] microgel particles which were synthesized with different cross‐linking densities. Their structures were studied by field‐emission scanning electron microscopy, transmission electron microscopy, UV‐vis spectroscopy, X‐ray diffraction and FT‐IR spectroscopy. The interactions between the microgel particles and the incorporated silver nanoparticles were investigated by X‐ray photoelectron spectroscopy. The results revealed that there was charge transfer from the carbonyl groups of the microgel particles to the silver nanoparticles. Moreover, as the diameter of the AgNPs decreases, the charge‐transfer efficiency increases accordingly. The P(NIPAM‐co‐AA)/AgNPs hybrid microgel particles were thermoresponsive and their behavior completely reversible with several heating/cooling cycles.
14.
Yue Cui Cheng Tao Suping Zheng Qiang He Sufen Ai Junbai Li 《Macromolecular rapid communications》2005,26(19):1552-1556
Summary: Thermosensitive polymer nanotubes can be fabricated within an aminopropylsilane‐modified porous anodic aluminum oxide membrane by surface‐initiated atom transfer radical polymerization (ATRP) followed by template removal. DSC experiments prove that the synthesized PNIPAM‐co‐MBAA copolymer nanotubes have a reversible thermosensitive behavior. The temperature‐induced changes in dimension and shape of the nanotubes were studied by AFM in real time in an aqueous environment. It indicates that the nanotubes undergo a shape alteration from an “ellipse” to “circular” shape in water upon heating to LCST or above.
15.
Acrylamide and acrylic acid are grafted on graphene by free‐radical polymerization to produce a series of graphene–poly(acrylamide‐co‐acrylic acid) hybrid materials with different contents of graphene. The materials demonstrate shape memory effect and self‐healing ability when the content of graphene is in the range of 10%–30% even though poly(acrylamide‐co‐acrylic acid) itself had poor shape memory ability. The permanent shape of the materials can be recovered well after 20 cycles of cut and self‐healing. The result is attributed to the hard–soft design that can combine nonreversible “cross‐link” by grafting copolymer on graphene and reversible “cross‐link” utilizing the “zipper effect” of poly(acrylamide‐co‐acrylic acid) to form or dissociate the hydrogen‐bond network stimulated by external heating.
16.
Harald Kirsebom Bo Mattiasson Igor Yu. Galaev 《Macromolecular rapid communications》2010,31(12):1095-1100
A macroporous material composed of closely aggregated particles was prepared by cryo‐structuration of N‐isopropylacrylamide‐co‐N‐hydroxymethylacrylamide (NIPA‐co‐HMAm) particle suspensions. The formed structure was maintained by the formation of covalent bonds through self‐crosslinking between the particles while the system was in a semi‐frozen state thus avoiding the need to freeze‐dry the sample. This resulted in macroporous structure composed of closely aggregated thermoresponsive particles which exhibit an ultrafast temperature response. The response rate can be attributed both to the macroporous structure as well as the fast responsive properties of the individual particles.
17.
Ravi Shankar Tushar K. Ghosh Richard J. Spontak 《Macromolecular rapid communications》2007,28(10):1142-1147
A dielectric elastomer derived from a polystyrene‐block‐poly(ethylene‐co‐butylene)‐block‐polystyrene triblock copolymer swollen with a midblock‐selective solvent is reported to show promise as a nanostructured organic actuator requiring no pre‐strain. This might provide an attractive alternative to conventional acrylic, siloxane, and polyurethane elastomers since the electromechanical properties are composition‐tunable.
18.
Summary: PE‐block‐PS and P(E‐co‐P)‐block‐PS block copolymers were synthesised via sequential monomer addition during homogeneous polymerisation on various phenoxyimine catalysts. One phenoxyimine catalyst was tailored to produce high molecular weight block copolymers containing both, polyolefin and polystyrene segments. According to chromatographic analysis and TEM morphology studies, blends of block copolymers and PE homopolymers [or P(E‐co‐P), respectively] were formed. The direct olefin/styrene block copolymer synthesis on phenoxyimine catalysts represents an attractive, new one‐pot route to styrenic block copolymers which are commercially prepared by anionic styrene/diene block copolymerisation followed by hydrogenation.
19.
Marco Bencini Elisabetta Ranucci Paolo Ferruti Amedea Manfredi 《Macromolecular rapid communications》2006,27(13):1060-1066
Summary: A novel functionalised poly(1‐vinylpyrrolidin‐2‐one) (PVP) derivative, carrying a pre‐determined amount of 2‐(2‐pyridinyldithio)ethylamine moieties as side substituents, P(VP‐co‐VP‐SS‐Py), has been prepared from carboxylated VP copolymers, in turn obtained by copolymerising 1‐vinylpyrrolidin‐2‐one with 3,3‐di‐(ethoxycarbonyl)‐1‐vinylpyrrolidin‐2‐one in the presence of radical initiators. Using reaction solvents acting in the mean time as chain transfer agents could control its molecular weight. P(VP‐co‐VP‐SS‐Py) proved to be extremely reactive towards exchange reactions with molecules containing mercapto functions, including bioactive peptides. The exchange derivative with reduced glutathione, chosen as a model compound, was easily prepared.
20.
We demonstrate a strategy for using an optical stimulus to trigger the dissociation of block copolymer (BCP) vesicles in aqueous solution. The BCP, comprising hydrophilic poly(ethylene oxide) (PEO) and a block of poly(methacrylic acid) bearing a number of spiropyran methacrylate comonomer units (P(MAA‐co‐SPMA)), was allowed to firstly self‐assemble into large vesicles in aqueous solution at pH = 3 with protonated carboxylic acid groups, and then become kinetically stable at pH = 8 due to the glassy vesicle membrane of P(MAA‐co‐SPMA). Fast dissociation of the vesicles was achieved through a cascade of events triggered by UV‐induced isomerization from neutral spiropyran to charged merocyanine in the membrane.