Summary: A new NLO‐active lambda‐shaped main‐chain polyimide that comprises a two‐dimensional carbazole chromophore was synthesized. This polyimide exhibits high thermal and temporal stability. It can endure temperatures of up to 240 °C for a transient time and maintain a large SH signal at 100 °C for a long time because embedding the two‐dimensional chromophores into the polymer backbone effectively suppresses the randomization of the oriented dipole at high temperatures.
A series of novel temperature and pH responsive block copolymers composed of poly(N‐isopropylacrylamide) (PNIPAM) and poly(L ‐lysine) (PLL) were synthesized. The effect of pH and the length of PLL on the lower critical solution temperature (LCST) of PNIPAM, and the self‐assembly of these PLL‐based copolymers induced by temperature and pH changes were investigated by the cloud point method, dynamic light scattering (DLS) and environmental scanning electron microscopy (ESEM). These PNIPAM‐b‐PLL copolymers can self‐assemble into micelle‐like aggregates with PNIPAM as the hydrophobic block at acidic pH and high temperatures; and at alkaline pH and low temperatures, they can self‐assemble into particles with PLL as the hydrophobic block. The copolymers may have potential applications in biotechnological and biomedical areas as drug release carriers.
The mode of packing and the adjacent re‐entry folds of chains of syndiotactic 1,2‐poly(1,3‐butadiene) have been studied by molecular mechanics calculations with the use of various sets of potential functions. The results of the packing analysis indicate that the crystal grows preferentially along the [100] and [110] directions. Models of fold have been built up on an infinite ab surface completely covered by adjacent re‐entry folds in the (100) and (110) planes. The results of energy minimizations show that several almost isoenergetic folds, constituted by four monomeric units, can be realized in the (100) planes, while the fold in the (110) planes has higher energy. The calculated value of the work of fold is in satisfactory agreement with that derived by crystallization kinetics reported in literature.
Alternating copolymers comprised of (meth)acrylates and vinyl ethers with controlled molecular weights and polydispersities were synthesized for the first time by living radical polymerization using organotellurium, stibine, and bismuthine chain transfer agents. Combining living alternating copolymerization and living radical or living cationic polymerization afforded hitherto unavailable block copolymers with controlled macromolecular structures.
The lithium salt of 2,6‐difluoro‐2′‐sulfobenzophenone was conveniently synthesized in one‐pot by reacting 2,6‐difluorophenyllithium with 2‐sulfobenzoic acid cyclic anhydride in THF at −70 °C whereafter the product crystallized out of solution. A poly(arylene ether) and a poly(arylene sulfide) were prepared by polycondensation reactions to demonstrate the reactivity and efficacy of this new monomer to produce sulfonated high‐molecular weight aromatic polymers for fuel cell proton‐exchange membranes. This work demonstrated that organolithium chemistry may offer versatile and straightforward pathways to new functional monomers with fluorine atoms activated for nucleophilic aromatic substitution reactions.
A unique example of macromolecular self‐assembly, where a mono‐component homopolyimide bearing carboxy end‐groups spontaneously forms nanopartilces with novel dimple‐like morphology in a single good solvent, is presented. The self‐assembly process is dramatically affected by the solution concentration and the temperature. It is proposed that such an unexpected self‐assembly behavior is a synergistic result of the self‐complementary hydrogen bonding between carboxy end‐groups and the propensity to parallel packing of polyimide chains through aromatic interactions.
Grazing incidence X‐ray diffraction (GI‐XRD) is used to characterize the crystallographic dynamics of low molecular weight (LMW) and high molecular weight (HMW) poly(3‐hexylselenophene) (P3HS) films and blend films of P3HS with [6‐6‐]‐phenyl‐C61‐butyric acid methyl ester (PCBM) as a function of ‘step‐by‐step’ thermal annealing, from room temperature to 250 °C. The temperature‐dependent GIXRD data show how the melting point of P3HS crystallites is decreased by the presence of PCBM. P3HS crystallite domain sizes dramatically increase upon annealing to the P3HS melting temperature. The formation of well‐oriented HMW P3HS crystallites with the (100) plane parallel to the substrate (edge‐on orientation), when cooled from melt, are observed. We compare the behaviour of P3HS pure and blend films with that of poly(3‐hexyl)thiophene (P3HT) pure and PCBM blended films and suggest that the similar temperature dependent behaviour we observe may be a common to polythiophene and related polymers and their blends.
Two novel monovinyl β‐cyclodextrin (β‐CD) monomers are synthesized. Their chemical compositions are characterized by means of element analysis, NMR and FT‐IR spectroscopy. The results show that the synthesis techniques used are convenient and efficient. Using N‐isopropylacrylamide as a comonomer, two novel linear copolymers can also be synthesized.
Electrostatic self‐assembly can be used to form supramolecular vesicles in aqueous solution. Vesicles consist of cationic G8 poly(amidoamine) dendrimers and the trivalent sulfonate dye Ar27. No classical amphiphiles are present but the interplay of electrostatics, π–π interaction and geometric factors influences the structure formation. Labeled guest molecules, both small molecules and peptides, can be included inside these vesicles and vesicles imaged by fluorescence techniques. The structure was studied by dynamic and static light scattering, small‐angle neutron scattering, confocal laser scanning microscopy, and fluorescence correlation spectroscopy. The study indicates the prospect of constructing functional nanoobjects by the self‐assembly of charged molecules in aqueous solution.
The synthesis of a novel fused hexacyclic electron rich monomer incorporating thieno[3,2‐b]thiophene is reported and characterized by single crystal X‐ray diffraction. Suzuki co‐polymerization with benzothiadiazole (BT) afforded a novel low band‐gap polymer P4TBT with high molecular weights and good solution processability. Bulk heterojunction solar cell devices using the P4TBT and [70]PCBM gave power conversion efficiencies of 2.5%. Top‐gate, bottom‐contact field effect transistors (FETs) using P4TBT displayed high hole mobilities of 0.07 cm2 · Vs−1 demonstrating the suitability of the novel monomer and polymer for use in high performing organic electronic devices.
Nonlinear optical vinyl polymers with high glass transition temperature (Tg) were prepared by the functionalization of a fluorinated acrylate‐methyl vinyl isocyanate copolymer. A modified pathway to obtain a thiophene bridged chromophore was worked out. Poled films of the polymers show a fairly high and stable nonlinear optical response, even at elevated temperatures.
The thiophene‐bridged chromophore, based on a substituted dicyanomethylene‐dihydrofuran acceptor, synthesized here. 相似文献
The synthesis of poly(β‐alanine) by Candida antarctica lipase B immobilized as novozyme 435 catalyzed ring‐opening of 2‐azetidinone is reported. After removal of cyclic side products and low molecular weight species pure linear poly(β‐alanine) is obtained. The formation of the polymer is confirmed with 1H NMR spectroscopy and MALDI‐TOF mass spectrometry. The average degree of polymerization of the obtained polymer is limited to = 8 by its solubility in the reaction medium. Control experiments with β‐alanine as a substrate confirmed that the ring structure of the 2‐azetidinone is necessary to obtain the polymer.
A nickel α‐diimine catalyst was used for Grignard metathesis (GRIM) polymerization of 2,5‐dibromo 3‐hexylthiophene and 2‐bromo‐5‐iodo‐3‐hexylthiophene monomers. GRIM polymerization of 2‐bromo‐5‐iodo‐3‐hexylthiophene generated regioregular polymers with molecular weights ranging from 3 000 to 12 000 g · mol−1. The nickel α‐diimine catalyst was also successfully used for the GRIM polymerization of a bulky benzodithiophene monomer.
A conjugated polymer containing an electron donating backbone (triphenylamine) and an electron accepting side chain (cyanoacetic acid) with conjugated thiophene units as the linkers has been synthesized. Dye‐sensitized solar cells (DSSCs) are fabricated utilizing this material as the dye sensitizer, resulting a typical power conversion efficiency of 3.39% under AM 1.5 G illumination, which represents the highest efficiency for polymer dye‐sensitized DSSCs reported so far. The results show the good promise of conjugated polymers as sensitizers for DSSC applications.
Summary: A chiral, regioregular poly[3‐(4‐alkoxyphenyl)thiophene] has been prepared and studied. Films prepared by fast evaporation of the solvent, consist of random‐coils, while films prepared by slow evaporation are composed of chirally aggregated, coplanar strands. Heat treatment transforms the random‐coils into aggregated films via an intermediate state, which was characterized as chiral, coplanar, unaggregated polymer strands.
Overview of the possible aggregation processes. 相似文献
Chlorine‐functionalized TEMPO‐capped polystyrenes were investigated using the matrix‐assisted laser desorption/ionization time‐of‐flight (MALDI‐TOF) technique. Amine‐ and acrylate‐functionalized agents and bifunctional TEMPO‐capped polystyrene were also analyzed to demonstrate the applicability of this method. Using this technique allowed to analyze the conversion of the chlorine function to an acrylate function, which was previously difficult to detect with other methods.
MALDI‐TOF mass spectrum of a polystyrene described in this article, as obtained with DHB as the matrix. 相似文献
Fast‐degrading, salicylate‐based poly(anhydride‐esters) were designed to degrade and release the active component, salicylic acid (SA), within 1 week. The polymer degradation was enhanced by using shorter or oxygen‐containing aliphatic chains. A copolymer of diglycolic acid was also made with a salicylate‐based diacid for comparison of polymer properties, including SA release. Both methods resulted in polyanhydrides with molecular weights ranging from 14 500 to 27 800 Da and displayed glass transition temperatures near physiological conditions, namely 33–40 °C. The homo‐ and copolymers completely degraded within one week releasing the chemically incorporated SA.
