Here, we report the use of fluorescently labelled proteins to study protein adsorption to microarrayed synthetic polymers for the first time, indicating that this method is appropriate for the study of protein adsorption on these arrays. To investigate protein adhesion directly we use atomic force microscopy (AFM) to measure the force of adhesion between a protein‐coated probe and the arrayed polymers. Both approaches show promise as methods for screening protein interactions with polymers in a microarray format. Comparison of these very different measures of protein–surface interactions indicate a good correlation.
A nickel α‐diimine catalyst was used for Grignard metathesis (GRIM) polymerization of 2,5‐dibromo 3‐hexylthiophene and 2‐bromo‐5‐iodo‐3‐hexylthiophene monomers. GRIM polymerization of 2‐bromo‐5‐iodo‐3‐hexylthiophene generated regioregular polymers with molecular weights ranging from 3 000 to 12 000 g · mol−1. The nickel α‐diimine catalyst was also successfully used for the GRIM polymerization of a bulky benzodithiophene monomer.
The RAFT radical polymerization of vinyl monomers in supercritical carbon dioxide was modeled using the Predici® simulation package. The sensitivity of polymerization responses on formulation and process variables was analyzed. The simulations were carried out using kinetic and physical parameters corresponding to the polymerization of methyl methacrylate in supercritical carbon dioxide, using AIBN as initiator, at 65 °C and 200 bar, and using values of the addition and fragmentation kinetic rate constants of a “typical” RAFT agent, as reference conditions. This is the first report in the literature addressing the modeling or simulation of RAFT polymerization in supercritical carbon dioxide.
Spherical single‐chain‐particles of poly(N‐isopropylacrylamide) were prepared in aqueous solution above the lower critical solution temperature upon the addition of sodium dodecyl sulfate. The size of the single‐chain‐particles was investigated by means of transmission electron microscopy and viscosity measurements of the corresponding solutions, indicating the absence of inter‐chain entanglements among the single‐chain‐particles.
Schematic of the preparation of PNIPAM single‐chain‐globules in solution. 相似文献
A fast method is presented for the calculation of the MSD and the MWD of polymers obtained via step‐growth polymerization of polyfunctional monomers bearing identical reactive groups (i.e., systems of type “Afi”). Using this method, the complete distribution can be calculated rapidly, not just the statistical averages of the polymer population such as or . The computed MSD and MWD give more insight than these averages and can be compared to similar data measured on actual polymer systems. The low‐ and intermediate molecular size/weight part of the distribution curves are calculated using a recurrence scheme, while the high‐molecular tail (large and very large polymers) of the distributions is derived from an asymptotic approximation of the associated generating functions.
Microporous films consisting of two‐dimensionally ordered void structures ‐ so‐called honeycomb films ‐ were produced by evaporation of polymer solutions under high humidity. Two types of poly(vinyl cinnamate)s were used: A newly synthesized amphiphilic poly(vinyl cinnamate) and a mixture of a commercial poly(vinyl cinnamate) and an amphiphilic polyion complex. Photo‐crosslinking of the honeycomb structure could be achieved by UV irradiation while completely retaining the film morphology. The crosslinked films showed excellent stability against organic solvents.
Highly functional and monodisperse macromolecules with tailored architecture constitute the key to designing efficient and smart nanomaterials. Dendrimers offer real potential to achieve this goal, and one of the earlier challenges faced by this novel class of polymers has been addressed by the evolution of synthetic methodologies. This review provides an evaluation of the role played by chemistry in taking these macromolecules of academic relevance to practical industrial and biological applications, in a relatively short period. One can now construct dendrimers in a ‘made‐to‐order’ fashion, for numerous applications in a variety of disciplines.
A novel phenylacetylene ( 1 ) having two hydroxyl groups and a chiral pinanyl group together with the other three related phenylacetylenes has been synthesized and (co)polymerized by using an achiral catalytic system. Among the four monomers, only 1 is suitable to the asymmetric‐induced polymerization ( AIP ). Chiral amplification phenomenon is only observed in the copolymerization of 1 with an achiral phenylacetylene having two hydroxyl groups ( 3 ). The tight helical cis‐cisoidal main chain formed by making intramolecular hydrogen bonds between the hydroxyl groups in the copoly( 1 / 3 ) enhances the efficiency of chiral induction and as a result chiral amplification phenomenon is observed during the copolymerization.
Atomistic MD simulations of water in the vicinity of oxidized amorphous atactic polystyrene are presented. The changes in the orientational and translational dynamics of water near polymer surfaces with different hydrophilicity are studied. Two main orientational relaxation processes of water molecules are distinguished: a process on a fs timescale, associated with the ballistic motion of water molecules, and a process on a ps timescale, associated with the self‐diffusion of water. The fast process is not affected by the presence of the polymeric surface. The second relaxation process differs at the interface from that in the bulk in that the dynamics of water molecules is more heterogeneous in the first. The effect of the representation of polystyrene films on the water dynamics is discussed.
The functionalization of magnetite (Fe3O4) nanoparticles with dopamine‐derived clickable biomimetic anchors is reported. Herein, an alkyne‐modified catechol‐derivative is employed as the anchor, as i) the catechol‐functional anchor groups possess irreversible covalent binding affinity to Fe3O4 nanoparticles, and ii) the alkyne terminus enables further functionalization of the nanoparticles by the grafting‐onto approach with various possibilities offered by ‘click’ chemistry. In the present work, azido‐end group functionalized Rhodamine and poly(ethylene glycol) (PEG) are utilized to coat the iron oxide nanoparticles to make them fluorescent and water soluble.
Summary: Polystyrene (PS) micro‐ and nanospheres with uniform dimensions and smooth surfaces have been produced by electrospray. The effect of PS molecular weight on beads morphology and the fundamental role of concentration have been investigated. Moreover, a new apparatus was designed to collect the polymer spheres during the process and to prevent the coalescence among the spheres.
PS micro‐ and nanospheres produced by electrospray 相似文献
Biodegradable polymeric nanocylinders were fabricated by segmental degradation of electrospun nanofibers. Poly(L ‐lactic acid) (PLA) was electrospun to produce non‐crystalline nanofibers that were immediately treated with amino group‐containing strong bases to fabricate semi‐crystalline PLA nanocylinders with tunable aspect ratio. The formation of PLA nanocylinders was attributed to two concurrent events occurring during the aminolysis reaction: (i) development of stacked lamellae and (ii) transversely oriented degradation and fragmentation of the amorphous gaps between lamellae, both responsible for the fragmentation of PLA nanofibers into uniformly shaped nanocylinders. The aspect ratio of PLA nanocylinders was tunable by varying aminolysis time and controlling nanofiber diameter.
Because of the complexity of monomer sequence formation during polymerization, it is necessary to employ programmed synthesis to prepare copolymers with well‐defined sequences. We introduce a computational tool that can generate recipes to synthesize copolymers with pre‐designed monomer sequences. An efficient design strategy was crafted based on analyzing the impact of varying multiple synthesis factors in forced gradient copolymerization on the targeted properties. Finally, the proposed design tool was applied to generate recipes for several different structural gradient copolymers as case studies. It was shown that a recipe that meets certain targets can be designed in minutes. The recipes that are designed can also be tailored according to different application requirements.
Summary: A high‐molecular‐weight fluorinated poly(aryl ether) with a 4‐bromophenyl pendant group has been synthesized based on a bromo‐bisphenol. A phosphonic acid derivative is readily prepared from this in high conversion yield. The phosphonated polymer possesses excellent thermal, oxidative, and dimensional stability, low methanol permeability, and reasonable proton conductivity, and may be a candidate polymeric electrolyte membrane for fuel cell applications.
Synthesis of a poly(aryl ether) with a phosphonic acid group. 相似文献
