Thermoresponsive polymer micelles are promising drug and radionuclide carriers with a strong passive targeting effect into solid tumors. We have synthesized ABA triblock copolymers poly[2‐methyl‐2‐oxazoline‐block‐(2‐isopropyl‐2‐oxazoline‐co‐2‐butyl‐2‐oxazoline)‐block‐2‐methyl‐2‐oxazoline]. These polymers are molecularly dissolved in aqueous millieu below the cloud point temperature (CPT) of the thermoresponsive central block and above CPT form polymer micelles at CMC 5–10 × 10?5 g · mL?1 with diameter ≈200 nm. The phenolic moiety introduced into the copolymer allowed radionuclide labeling with iodine‐125 ongoing in good yield with sufficient in vitro stability under model conditions.
We report the simple one‐pot synthesis of size tunable zinc oxide nanoparticles (ZnO NPs) out of an organometallic ZnO precursor using the self‐assembly of solution phase polystyrene‐block‐poly(2‐vinylpyridine) micelles. The resulting hybrid material could be deposited on various substrates in a straightforward manner with the NPs showing size‐dependent absorption and photoluminescence due to the quantum‐size effect. We compare the results to the assembly of preformed NPs which are selectively incorporated in the poly(2‐vinylpyridine) core of the micelles due to the high affinity of ZnO to vinylpyridine.
A new 2‐oxazoline monomer with a protected thiol group, 2‐[2‐(4‐methoxybenzylsulfanyl)ethyl]‐2‐oxazoline, MOB‐SOx , was synthesized from commercially available compounds. MOB‐SOx and 2‐ethyl‐2‐oxazoline (EtOx) were simultaneously polymerized yielding well defined copolymers with narrow molar mass distributions and target polymer chain length. The copolymerization was initiated by N‐methyl‐2‐methyl‐2‐oxazolinium triflate ( MeOxOTf ). After quantitative deprotection, poly(2‐oxazoline) with pendant thiol groups was obtained. The thiol groups were quantitatively added to the double bond of N‐phenyl‐acrylamide ( PhA ) and benzylmaleimide ( BzM ). Graft copolymers were obtained by reaction of those SH containing polymers with poly(2‐methyl‐2‐oxazoline)s bearing acrylamide ( PMeOx 10 A ) and maleimide ( PMeOx 10 M ) as terminal reactive groups.
The quartz crystal microbalance with dissipation technique (QCM‐D) and atomic force microscopy (AFM) have been employed to study the interaction of N‐tetradecyl trimethyl ammonium bromide (TdTmAB) with polyelectrolyte multilayers containing poly(sodium 4‐styrene sulfonate) (PSS) as the polyanion and either poly(allylamine hydrochloride) (PAH) or poly(diallyl dimethyl ammonium chloride) (PDADMAC) as the polycations. The multilayers were exposed to aqueous solutions of TdTmAB. This resulted in a selective removal of PDADMAC PSS layers while layers with PAH as polycation remained stable. It is suggested that PDADMAC/PSS multilayers can be employed as strippable protecting layers.
New amphiphilic graft copolymers that have a poly(ε‐caprolactone) (PCL) biodegradable hydrophobic backbone and poly(4‐vinylpyridine) (P4VP) or poly(2‐(N,N‐dimethylamino)ethyl methacrylate) (PDMAEMA) hydrophilic side chains have been prepared by anionic polymerization of the corresponding 4VP and DMAEMA monomers using a PCL‐based macropolycarbanion as initiator. The water solubility of these amphiphilic copolymers is improved by quaternization, which leads to fully water‐soluble cationic copolymers that give micellar aggregates in deionized water with diameters ranging from 65 to 125 nm. In addition, to improve the hydrophilicity of PCL‐g‐P4VP, grafting of poly(ethylene glycol) (PEG) segments has been carried out to give a water‐soluble double grafted PCL‐g‐(P4VP;PEG) terpolymer.
Crystallization of poly(2‐isobutyl‐2‐oxazoline) and poly(2‐nonyl‐2‐oxazoline) is found to occur by room temperature annealing below the upper critical solution temperature in ethanol–water solvent mixtures. Both polymers produce similar self‐assembled structures (see image), resembling the previously reported crystalline hierarchical structures obtained from hot aqueous poly(2‐isopropyl‐2‐oxazoline) solutions above the lower critical solution temperature. These observations suggest that the crystallization induced self‐assembly process is a rather general phenomenon occurring for semicrystalline polymers in liquid–liquid two phase systems.
The bulk polymerization of 2‐(dec‐9‐enyl)‐2‐oxazoline ( DecEnOx ), a fatty acid‐based monomer for the cationic ring‐opening polymerization, is reported. Furthermore, under optimal conditions, namely microwave heating at 100 °C, the bulk copolymerization with 2‐ethyl‐2‐oxazoline yielded well‐defined copolymers. Due to its pendant alkene groups DecEnOx ‐based polymers possess the potential to be modified in efficient thiol‐ene reactions. The functionalization with thiols, e.g., dodecanethiol and 2,3,4,6‐tetra‐O‐acetyl‐1‐thio‐β‐D ‐glycopyranose in “green” solvents is demonstrated.
Summary: Atom transfer radical polymerization (ATRP) and reversible addition‐fragmentation transfer (RAFT) polymerization of N‐methyl methacrylamide and methyl methacrylate were investigated in the presence of rare‐earth triflates known to enhance polymer isotacticity. Poly(N‐methyl methacrylamide) with controlled molecular weight, low polydispersity, and enhanced isotacticity was prepared by ATRP and RAFT in the presence of catalytic amounts of yttrium trifluoromethanesulfonate or ytterbium trifluoromethanesulfonate. The tacticity of poly(N‐methyl methacrylamide) depends on the Lewis acid concentration: well‐defined polymers with predominantly either syndiotactic, atactic, or isotactic triads were prepared by adjusting the concentration of the Lewis acid. Simultaneous control of molecular weights, polydispersities, and tacticities in the polymerization of methyl methacrylate was less successful.
Free radical propagation in the presence of a Lewis acid (LA) giving rise to chelate control. 相似文献
The mode of packing and the adjacent re‐entry folds of chains of syndiotactic 1,2‐poly(1,3‐butadiene) have been studied by molecular mechanics calculations with the use of various sets of potential functions. The results of the packing analysis indicate that the crystal grows preferentially along the [100] and [110] directions. Models of fold have been built up on an infinite ab surface completely covered by adjacent re‐entry folds in the (100) and (110) planes. The results of energy minimizations show that several almost isoenergetic folds, constituted by four monomeric units, can be realized in the (100) planes, while the fold in the (110) planes has higher energy. The calculated value of the work of fold is in satisfactory agreement with that derived by crystallization kinetics reported in literature.
Living cationic ring‐opening polymerizations of 2‐ethyl‐2‐oxazoline and purification of the resulting polymers were performed utilizing an automated synthesizer. Eight polymers (500 mg scale) as well as 40 polymers (150 mg scale) were synthesized in parallel to investigate the reproducibility and the living character of the polymerizations. The poly(2‐ethyl‐2‐oxazoline)s obtained such were characterized by means of 1H NMR spectroscopy, MALDI‐TOF mass spectrometry and online gel permeation chromatography.
The application of microwave irradiation in polymer syntheses and modifications is of continuously growing interest and has received significant international interest since the beginning of the millennium. Preceded by a review that was published 6 years ago, the present paper summarizes the most recent trends in this research area. Radical as well as step‐growth and ring‐opening polymerizations will be addressed; furthermore, the evolution from microwave‐assisted polymerizations to microwave‐assisted material fabrication will be described on the examples of polymeranalogous reactions, polymer/metal composites and bio‐based materials.
A novel comb‐like derivative CPEG‐g‐DNQ was prepared by incorporating light responsive 2‐diazo‐1,2‐naphthoquinone (DNQ) groups into the structure of comb‐like poly(ethylene glycol) (CPEG). DLS and TEM results showed that CPEG‐g‐DNQ self‐assembled into spherical micelles with an average size of about 135 nm in water. Upon exposure to light, the micelles could be disrupted because of the conversion of hydrophobic DNQ to hydrophilic 3‐indenecarboylic acid. Additionally, hydrophobic coumarin 102 was successfully loaded into the micelles and photo‐induced ON‐OFF release was demonstrated by fluorescence spectroscopy. MTT assay revealed that the micelles are biocompatible. These photo‐responsive micelles might have great potential for controlled release of hydrophobic drugs.
Summary: A comparison between the crystal structure of isotactic cis‐1,4‐poly(1,3‐pentadiene) previously predicted by molecular mechanics calculations and that successively determined by other authors by experimental data is reported. The agreement between the two structures is very good as far as the space group, the unit cell parameters and the conformation of the polymer chain are concerned. The mode of packing of the chains proposed in the experimental crystal structure is very similar to that found as relative minimum in the previous energy calculations. The coexistence, in different amounts, of these two modes of packing is suggested by the analysis of the simulated X‐ray spectra and by the results of new energy calculations.
A mode of packing of chains of isotactic cis‐1,4‐poly(1,3‐pentadiene). 相似文献
Summary: Evidence of clay migration from the core to the surface of poly(propylene)/montmorillonite nanocomposites is provided. A three‐ to fivefold increase in the clay concentration of the surface is obtained during isothermal heating in oxidative atmosphere. The mechanism of migration is investigated by means of attenuated total reflectance Fourier transform infrared spectrometry. It is shown that oxygen plays a fundamental role in the migration mechanism.
Summary: We synthesized for the first time novel pH‐responsive polyampholyte microgels consisting of poly(methacrylic acid) and poly(2‐(diethylamino)ethyl methacrylate) (PMAA‐PDEA) that are sterically stabilized with poly(ethylene glycol) methyl ether methacrylate (PEGMEM). These microgels showed enhanced hydrophilic behavior in aqueous medium at low and high pH but become hydrophobic and compact between pH 4 and 6 near the isoelectric point. Dynamic‐light scattering measurements showed that the hydrodynamic radius, Rh of these microgels is approximately 100 nm between pH 4 and 6 and increases to around 140 and 170 nm at pH 2 and 10, respectively. It is evident that the cross‐linked MAA‐DEA microgel that is sterically stabilized with PEGMEM retains the polyampholyte properties in solution.
We describe the preparation and characterization of uniaxial magnetic gels. Fibril formation of the embedded magnetic particles generates easily detectable magnetic and optical anisotropies. A finite magnetization is frozen‐in and leads to a ferromagnetic‐like response in small homogeneous external magnetic fields. We present, for the first time, frequency dependent measurements of the shear modulus G′. Despite their optical and magnetic anisotropy, the gels are mechanically isotropic.
The time‐dependent G′ for a ferrogel in the parallel orientation in a homogeneous field of 200 mT. 相似文献
Summary: A p–n di‐channel copolymer based on polyfluorene (PF) has been designed and prepared. Branches containing oxadiazole units are attached to the PF backbone through the spiro‐structure and act as channels to improve the electron affinity; these branches form a steric ‘di‐channel’ framework with the polymer backbone. The polymer possesses excellent thermal stability. The lowest unoccupied molecular orbital energy level of the polymer is significantly altered in comparison with poly(9,9‐dioctylfluorene‐2,7‐diyl).
Schematic of the di‐channel polyfluorene synthesized here and the mechanism of energy transfer through the structure. 相似文献
Summary: A novel non‐aqueous emulsion system, consisting of cyclohexane as the continuous and acetonitrile as the dispersed phase, is described. Stabilization of the system can be achieved by using polyisoprene‐block‐poly(methyl methacrylate) copolymers as emulsifiers. The suitability of this system for performing water‐sensitive, catalytic, and oxidative polymerizations and polycondensations is demonstrated by the synthesis of poly(3,4‐ethylenedioxythiophene), poly(thiophene‐3‐yl‐acetic acid), and polyacetylene. In all cases spherical nanoparticles with diameters as small as 23 nm can be obtained.
Summary: A new physical method of fabricating hollow spheres from different polymers has been developed. In this method, emulsions were prepared by mixing organic solutions of polystyrene, poly(D ,L ‐lactide‐co‐glycolide) (PLGA), and bacterial poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (PHBV), water, and surfactants. The evaporation of solvents at room temperature caused a phase separation that eventually yielded hollow spheres. Molecular weights, concentrations of polymers, and the natures of surfactant and solvent were important aspects of hollow sphere formation and structure. A mechanism for the formation of hollow spheres is proposed based on observations made using an optical microscope equipped with a digital camcorder and using scanning electron microscopy images of hollow spheres obtained under different conditions.
A scanning electron microscopy image of a broken smaller hollow sphere prepared using a 7 wt.‐% polystyrene solution (diameter of the sphere ∼10 micrometers). 相似文献
In this communication, β‐cyclodextrin modified quantum dots were used as a water‐soluble “supramolecular” cross‐linker (SCL) because of its surface's supramolecular activity. The guest monomer‐loaded SCL (mSCL) can be used to copolymerize with water‐soluble monomers leading to transparent hybrid supramolecular hydrogels. This simple and versatile method opens new venues for the preparation of hybrid supramolecular hydrogels and the host–guest chemistry of cyclodextrins.
