Molecular beacon-metal nanowire interface: effect of probe sequence and surface coverage on sensor performance

We report the effect of surface coverage and sequence on the performance of 5' thiolated, 3' fluorophore-labeled DNA hairpin probes bound to Au/Ag striped ("barcoded") metal nanowires. Coverage was controlled by varying probe concentration, buffer ionic strength, and by addition of short hydroxy-terminated alkanethiol diluent molecules during probe assembly onto the nanowire surface. Surface dilution of the surface-bound probes with a omega-hydroxyl alkanethiol, a commonly accepted practice in the surface-bound DNA literature, did not appreciably improve sensor performance as compared to similar probe coverages without hydroxyalkanethiol diluents; this finding underscores the differences between the molecular beacon probes used here and more traditional nonfluorescent, random coil probes. We found that intermediate probe coverage of approximately 10 (12) molecules/cm (2) gave the best discrimination between presence and absence of a target sequence. Because we are interested in multiplexed assays, we also compared several beacon probe sequences having different stabilities for secondary structure formation in solution; we found that both probe surface coverage and sensor performance varied for different probe sequences. When five different molecular beacon probes, each bound to barcoded nanowires, were used in a multiplexed, wash-free assay for target oligonucleotides corresponding to viral nucleic acid sequences, these differences in probe performance did not prevent accurate target identification. We anticipate that the findings described here will also be relevant to other applications involving molecular beacons or other structured nucleic acid probes immobilized on metal surfaces.     

Poly(dG) spacers lead to increased surface coverage of DNA probes: an XPS study of oligonucleotide binding to zirconium phosphonate modified surfaces

A spacer is often employed between the surface linking group and the probe sequence to improve the performance of DNA microarrays. Previous work demonstrated that a consecutive stretch of guanines as a spacer increased target capture during hybridization relative to probes with either no spacer or a similar stretch of one of the other nucleotides. Using zirconium phosphonate modified surfaces with 5'-phosphorylated ssDNA probes, the present study compares the surface coverage of ssDNA probes containing either a poly(dG) spacer or a poly(dA) spacer. Surface coverages are quantified by XPS using a modified overlayer model. The results show that after treatment to mimic conditions of the passivation and hybridization steps the probe with the poly(dG) spacer has about twice the surface coverage as the probe with the poly(dA) spacer, indicating that increased target capture is due to higher probe coverage. When monitoring the surface coverage after each rinsing step, it is observed that the probe with the poly(dA) spacer is more susceptible to rinsing, suggesting the interaction with the surface is different for the two probes. It is suggested that the formation of G quadruplexes causes an increased avidity of the probe for the zirconium phosphonate surface.     

Analysis of DNA hybridization regarding the conformation of molecular layer with piezoelectric microcantilevers

Lead Zirconate Titanate (PZT)-embedded microcantilevers were fabricated with dimensions of 30 × 90 × 3 μm(3) (width × length × thickness). A thicker PZT layer improved the actuation and enabled long-term data acquisition in common aqueous buffers with a frequency resolution of 20 Hz. A quantitative assay was conducted in the range of 1-20 μM and the resonant frequency was found to increase with the concentration of target DNAs and the probe DNAs were almost saturated at 20 μM. Back-filling with ethyleneglycol-modified alkanethiol was shown to facilitate the hybridization efficiency and stabilize the surface reaction, resulting in a signal enhancement of 40%. We report for the first time how secondary structures in oligonucleotide monolayer change the surface property of a dynamic mode microcantilever and subsequently affect its oscillating behavior. Using fabricated microcantilevers, the real time changes in resonant frequency upon hybridization were measured by utilizing different probe and target sets. The results revealed that the microcantilevers experienced a resonant frequency upshift during the hybridization with complementary DNAs if a dimer structure was present between DNA probes. A resonant frequency downshift was observed for DNA probes that did not contain any complex secondary structures. In addition, the results demonstrate the potential of using these microcantilevers to extract structural information of oligonucleotides.     

Computer simulation study of probe-target hybridization in model DNA microarrays: effect of probe surface density and target concentration

We use lattice Monte Carlo simulations to study the thermodynamics of hybridization of single-stranded "target" genes in solution with complementary "probe" DNA molecules immobilized on a microarray surface. The target molecules in our system contain 48 segments and the probes tethered on a hard surface contain 8-24 segments. The segments on the probe and target are distinct, with each segment representing a sequence of nucleotides that interacts exclusively with its unique complementary target segment with a single hybridization energy; all other interactions are zero. We examine how surface density (number of probes per unit surface area) and concentration of target molecules affect the extent of hybridization. For short probe lengths, as the surface density increases, the probability of binding long stretches of target segments increases at low surface density, reaches a maximum at an intermediate surface density, and then decreases at high surface density. Furthermore, as the surface density increases, the target is less likely to bind completely to one probe; instead, it binds simultaneously to multiple probes. At short probe lengths, as the target concentration increases, the fraction of targets binding completely to the probes (specificity) decreases. At long probe lengths, varying the target concentration does not affect the specificity. At all target concentrations as the probe length increases, the fraction of target molecules bound to the probes by at least one segment (sensitivity) increases while the fraction of target molecules completely bound to the probes (specificity) decreases. This work provides general guidelines to maximizing microarray sensitivity and specificity. Our results suggest that the sensitivity and specificity can be maximized by using probes 130-180 nucleotides long at a surface density in the range of 7 x 10(-5)- 3 x 10(-4) probe molecules per nm(2).     

Sequence-specific, self-reporting hairpin inversion probes

Sequence-specific probes for detecting target nucleic acids are the cornerstone of the genomics revolution (e.g., microarrays) and of molecular diagnostics. Molecular beacons are self-reporting, nucleic acid probes whose structure includes complementary terminal arm sequences and a loop that is complementary to a target sequence; fluorescence detection is by changes in proximity of fluorophore and quencher pairs attached on opposite arms. However, molecular beacon design is not as simple as attaching arbitrary arm sequences onto previously designed linear probes. The stem arms can also interact with flanking target sequences, changing the hybridization specificity; constantly adapting the arms to avoid such interactions, if not desired, increases design complexity. Herein, I report the use of inversion linkages in probe backbones leading to stem arms of sequence polarity opposite to that of the target-binding region, thereby eliminating potential hybridization of the arms with the target. Using two microbial sequence categories, thermal denaturation and target titration analyses demonstrate that these new hairpin inversion probes retain closed-state stability comparable to that of molecular beacons, contain easily designed arm sequences that do not interact with targets, and, therefore, can be used universally with optimized linear probe sequences.     

Capillary electrophoresis and fluorescence studies on molecular beacon-based variable length oligonucleotide target discrimination

Molecular beacons (MBs) are oligonucleotide probes having a compact hairpin structure, with a fluorophore attached to one end and a quencher molecule attached to the other end. In its native state, the fluorophore is quenched by virtue of its proximity to the quencher molecule. Upon hybridization with its complementary oligonucleotide target, fluorescence is elicited due to a conformational change that results in separation of the fluorophore and quencher molecule. The present study describes the hybridization interaction of an MB to various complementary target sequences. The effects of temperature and length of complementary target sequences on hybridization were investigated using capillary electrophoresis and solution-based fluorescence techniques. Hybridization efficiency was dependent on the ability of the target sequences to destabilize the stem region by binding directly to the stem region. Optimal hybridization occurred between 40 and 50 degrees C for all targets tested, with the true target forming a more stable hybrid complex.     

Hybridization dynamics of surface immobilized DNA

We model the hybridization kinetics of surface attached DNA oligomers with solubilized targets. Using both master equation and rate equation formalisms, we show that, for surface coverages at which the surface immobilized molecules interact, barriers to penetration create a distribution of target molecule concentrations within the adsorbed layer. By approximately enumerating probe and target conformations, we estimate the probability of overlap between complementary probe and target regions as a function of probe density and chain length. In agreement with experiments, we find that as probe molecules interact more strongly, fewer nucleation sites become accessible and binding rates are diminished relative to those in solution. Nucleation sites near the grafted end of the probes are least accessible; thus targets which preferentially bind to this region show more drastic rate reductions than those that bind near the free end of the probe. The implications of these results for DNA-based biosensors are discussed.     

Effect of secondary structure on the thermodynamics and kinetics of PNA hybridization to DNA hairpins.

The binding of a series of PNA and DNA probes to a group of unusually stable DNA hairpins of the tetraloop motif has been observed using absorbance hypochromicity (ABS), circular dichroism (CD), and a colorimetric assay for PNA/DNA duplex detection. These results indicate that both stable PNA-DNA and DNA-DNA duplexes can be formed with these target hairpins, even when the melting temperatures for the resulting duplexes are up to 50 degrees C lower than that of the hairpin target. Both hairpin/single-stranded and hairpin/hairpin interactions are considered in the scope of these studies. Secondary structures in both target and probe molecules are shown to depress the melting temperatures and free energies of the probe-target duplexes. Kinetic analysis of hybridization yields reaction rates that are up to 160-fold slower than hybridization between two unstructured strands. The thermodynamic and kinetic obstacles to hybridization imposed by both target and probe secondary structure are significant concerns for the continued development of antisense agents and especially diagnostic probes.     

Sensitive sequence-specific molecular identification system comprising an aluminum micro-nanofluidic chip and associated real-time confocal detector

A method for the development of continuous density gradients of immobilized oligonucleotide probes (20mer) along the length of microfluidic channels is demonstrated. The development of continuous density gradients was achieved using variable electrokinetic transport of probes in hybrid glass-polydimethylsiloxane microfluidic chips. The probes were terminated with an amine functional group, and were delivered by electrokinetic pumping to the flat glass channel wall after it had been densely coated with covalently immobilized aldehyde groups. This method provided probe immobilization densities ranging from 4.5(±0.8)×10(13) to 2.5(±0.8)×10(11) molecules cm(-2), with longitudinal dilution and differential mass transport of the injected plug of probes being the primary factors responsible for the gradient of density. The utility of the resulting density gradient of immobilized probes to control the selectivity of hybridization was demonstrated at room temperature by discrimination between a fully complementary oligonucleotide target, and a target strand containing 3 base pair mismatches (3 BPM) based on the spatial pattern of hybridization for sub-picomole quantities of targets. Single nucleotide polymorphism (SNP) discrimination was possible when temperature control was implemented to improve resolution of the mismatch discrimination, allowing SNP discrimination at 35 °C with a contrast ratio of almost 5 to 1.     

Distance-dependent emission from dye-labeled oligonucleotides on striped Au/Ag nanowires: effect of secondary structure and hybridization efficiency

When fluorescently tagged oligonucleotides are located near metal surfaces, their emission intensity is impacted by both electromagnetic effects (i.e., quenching and/or enhancement of emission) and the structure of the nucleic acids (e.g., random coil, hairpin, or duplex). We present experiments exploring the effect of label position and secondary structure in oligonucleotide probes as a function of hybridization buffer, which impacts the percentage of double-stranded probes on the surface after exposure to complementary DNA. Nanowires containing identifiable patterns of Au and Ag segments were used as the metal substrates in this work, which enabled us to directly compare different dye positions in a single multiplexed experiment and differences in emission for probes attached to the two metals. The observed metal-dye separation dependence for unstructured surface-bound oligonucleotides is highly sensitive to hybridization efficiency, due to substantial changes in DNA extension from the surface upon hybridization. In contrast, fluorophore labeled oligonucleotides designed to form hairpin secondary structures analogous to solution-phase molecular beacon probes are relatively insensitive to hybridization efficiency, since the folded form is quenched and therefore does not appreciably impact the observed distance-dependence of the response. Differences in fluorescence patterning on Au and Ag were noted as a function of not only chromophore identity but also metal-dye separation. For example, emission intensity for TAMRA-labeled oligonucleotides changed from brighter on Ag for 24-base probes to brighter on Au for 48-base probes. We also observed fluorescence enhancement at the ends of nanowires and at surface defects where heightened electromagnetic fields affect the fluorescence.     

新型"三明治"结构DNA电化学传感器对急性早幼粒细胞白血病相关融合基因的检测

基于急性早幼粒细胞白血病(APL)中PML/RARα融合基因的碱基序列,设计了新型的锁核酸(LNA)修饰寡核苷酸作为捕获探针和信号探针,研究出一种基于"三明治"传感模式的电化学生物传感器对PML/RARα融合相关基因进行检测.靶序列分别与捕获探针和信号探针杂交后形成"三明治"结构.将修饰电极置于含有底物3,3′,5,5′-四甲基联苯胺(TMB)和过氧化氢的测定溶液中,用计时电流法检测靶序列.结果表明,该传感器可定量识别和检测溶液中人工合成的短链APL PML/RARα融合基因片段.经过条件优化,杂交前后电流值与靶标链浓度在1.0×10~(-12) ～2.5×10~(-11) mol/L范围内呈良好的线性关系,检出限为8.5×10~(-13) mol/L.该方法简单、特异性好,有望用于实际样品的检测.     

The application of β-cyclodextrin derivative functionalized aligned carbon nanotubes for electrochemically DNA sensing via host-guest recognition

We functionalized aligned carbon nanotubes (ACNTs) electrode with a new kind of β-cyclodextrin (β-CD) derivative through diazotization reaction. The resulting β-CD/ACNTs electrode was used to detect DNA hybridization in homogeneous solution based on host–guest recognition technology. In the sensing protocol, one special DNA probe was designed with a stem-loop structure and both ends modified, which we called dually labeled DNA probe (DLP). One end of the DLP was labeled with dabcyl as guest molecule for β-CD/ACNTs electrode capture, and the other end was labeled with a CdS nanoparticle as an electrochemical tag to indicate the occurrence of DNA hybridization. In the absence of the target DNA sequence, the DLP maintains its hairpin structure in solution phase and would not be captured and detected by the β-CD/ACNTs electrode. In the presence of the complementary target sequence, the conformational structure of the DLP was altered and a double-stranded DNA (dsDNA) molecule was formed by the hybridization of DLP and complementary DNA sequence. Consequently, the dsDNA was captured by the β-CD/ACNTs electrode owing to guest–host recognition between β-CD and dabcyl. The electrochemical signal from the CdS nanoparticle–dsDNA/β-CD/ACNTs was then measured. Under optimized detection conditions, the proposed method showed high sensitivity and selectivity with a detection limit of 5.0 × 10⁻¹³ M for complementary DNA sequence.     

Microfluidic nanoplasmonic-enabled device for multiplex DNA detection

We describe a rapid, quantitative, multiplex, self-labelled, and real-time DNA biosensor employing Ag nanoparticle-bound DNA hairpin probes immobilized in a microfluidic channel. Capture of complementary target DNAs by the microarrayed DNA hairpin probes results in a positive fluorescence signal via a conformational change of the probe molecules, signalling the presence of target DNAs. The device's capability for quantitative analyses was evaluated and a detection time as low as 6 min (with a target flow rate of 0.5 μl min(-1)) was sufficient to generate significant detection signals. This detection time translates to merely 3 μl of target solution consumption. An unoptimized sensitivity of 500 pM was demonstrated for this device.     

Characterization of DNA immobilization and subsequent hybridization using in situ quartz crystal microbalance, fluorescence spectroscopy, and surface plasmon resonance

We have characterized the immobilization of thiol-modified oligomers on Au surfaces and subsequent hybridization with a perfectly matched or single-base mismatched target using a quartz crystal microbalance (QCM) and fluorescence spectroscopy. The surface density of immobilized probe molecules and the hybridization efficiency depending on the type of buffer and salt concentration were investigated. We observed some ambiguities in surface coverage deduced from QCM measurement and adopted a complementary fluorescence displacement method. Direct comparison of surface coverage deduced from frequency change in QCM measurement and determined by the fluorescence exchange reaction revealed that QCM results are highly overestimated and the amount of overestimation strongly depends on the type of buffer and the structure of the film. Discrimination capability of the surface attached 15-mer probe was also examined using a single-base mismatched target at various hybridization temperatures. Hybridization efficiency depending on the type of single base mismatch was investigated using surface plasmon resonance (SPR).     

Sensitive and selective DNA detection based on the combination of hairpin-type probe with endonuclease/GNP signal amplification using quartz-crystal-microbalance transduction

In order to develop a highly sensitive and selective piezoelectric transducer for the detection of DNA, the bio-recognizing probe is for the first time designed by introducing a hairpin structure and a recognition site for EcoRI into an oligonucleotide sequence and signal amplifiers are prepared by modifying gold nanoparticles (GNPs) with biomolecules, deepening the application and understanding of biomaterials. The piezoelectric transducer is prepared by immobilizing designed hairpin recognition probe onto the quartz-crystal-microbalance (QCM). In the absence of target DNA, the hairpin probe is removed from the QCM surface after exposure to endonuclease, inhibiting the subsequent signaling reaction. In contrast, introduction of target DNA can open the hairpin probe due to the probe/target hybridization, dissociating the cleavable double-stranded portion. In this case, even if being treated with endonuclease, the integrated hairpin probe is maintained. Subsequent introduction of GNPs modified with detection probes that can hybridize to the terminal sequence of hairpin probe results in a many-folds increase of the frequency response. Utilizing the proposed transduction scheme, the reliable target DNA detection can be accomplished. The detection limit of 2 pM and dynamic response range for target DNA from 2 to 300 pM are obtained. Furthermore, single-base mismatched DNAs can be easily identified. The developed proof-of-principle of a novel piezoelectric transduction scheme is expected to establish a potential platform for the disease-associated mutation analysis and DNA hybridization detection in biotechnology and medical diagnostics.     

基于纳米金探针和基因芯片的DNA检测新方法

运用荧光纳米金探针和基因芯片杂交建立一种新的DNA检测方法. 荧光纳米金探针表面标记有两种DNA探针: 一种为带有Cy5荧光分子的信号探针BP1, 起信号放大作用; 另一种为与靶DNA一部分互补的检测探针P532, 两种探针比例为5∶1. 当靶DNA存在时, 芯片上捕捉探针(与靶DNA的另一部分互补)通过碱基互补配对结合靶DNA, 将靶DNA固定于芯片上; 荧光纳米金探针通过检测探针与靶DNA及芯片结合, 在芯片上形成“三明治”复合结构, 最后通过检测信号探针上荧光分子的信号强度来确定靶DNA的量. 新方法检测灵敏度高, 可以检测浓度为1 pmol/L的靶DNA, 操作简单, 检测时间短. 通过改进纳米金探针的标记和优化杂交条件, 可进一步提高核酸检测的灵敏度, 这将在核酸检测方面具有重要的应用价值.     

Electrochemical Genoassay Design for Allele‐Specific Detection of Toll‐Like Receptor‐2 Gene Polymorphism

An allele‐specific voltammetric genoassay for the detection of allele‐specific toll‐like receptor‐2 gene arg753gln polymorphism (TLR‐2) from polymerase chain reaction (PCR) amplified real samples was described in this study. Meldola blue (MDB), an intercalator molecule, was used as hybridization label. The wild‐type and mutant type oligonucleotide probes were immobilized onto disposable graphite electrode surfaces by covalent attachment method. The extent of hybridization between probe and target sequences was determined by using differential pulse voltammetry (DPV). As a result of the interaction between MDB and DNA at electrode surface, the MDB signal observed from probe sequence before hybridization and after hybridization with MM sequence is lower than that observed after hybridization with complementary sequence. The differences between the MDB reduction peaks obtained from probe modified, hybrid modified and MM modified electrode were used to detect TLR‐2 from PCR amplified real samples. The discrimination of homozygous and heterozygous alleles was also established by comparing the peak currents of MDB reduction signals. Numerous factors affecting the target hybridization and indicator binding reactions are optimized to maximize the sensitivity.     

Electrochemical biosensor for detection of BCR/ABL fusion gene based on hairpin locked nucleic acids probe

This communication reports on a novel biosensor to study the hybridization specificity by using thiolated hairpin locked nucleic acids (LNA) as the capture probe. The LNA probe was immobilized on the gold electrode through sulfur–Au interaction and could selectively hybridize with its target DNA. Differential pulse voltammetry (DPV) was used to monitor the hybridization reaction on the probe electrode. The decrease of the peak current of methylene blue, an electroactive indicator, was observed upon hybridization of the probe with the target DNA. The results indicated this new method has excellent specificity for single-base mismatch and complementary after hybridization, and a high sensitivity. This LNA probe has been used for assay of fusion gene in Chronic Myelogenous Leukemia (CML) of the real sample with satisfactory result.     

Sequence-specific alkylation by Y-shaped and tandem hairpin pyrrole-imidazole polyamides

To extend the target DNA sequence length of the hairpin pyrrole-imidazole (Py-Im) polyamide 1, we designed and synthesized Y-shaped and tandem hairpin Py-Im polyamides 2 and 3, which possess 1-(chloromethyl)-5-hydroxy-1,2-dihydro-3H-benz[e]indole (seco-CBI) as DNA-alkylating moieties. High-resolution denaturing polyacrylamide gel electrophoresis by using 5'-Texas-Red-labeled 465 base pair (bp) DNA fragments revealed that conjugates 2 and 3 alkylated the adenine of the target DNA sequences at nanomolar concentrations. Conjugate 2 alkylated adenine N3 at the 3' end of two 8 bp match sequences, 5'-AATAACCA-3' (site A) and 5'-AAATTCCA-3' (site C), while conjugate 3 recognized one 10 bp match sequence, 5'-AGAATAACCA-3' (site A) in the 465 bp DNA fragments. These results demonstrate that seco-CBI conjugates of Y-shaped and tandem hairpin polyamides have extended their target alkylation sequences.     

Electrochemical Determination of Label Free BRCA Hybridization by Single Use Antioxidant Modified Electrode

A novel DNA probe based on caffeic acid modified disposable pencil graphite electrodes were developed for the first time for the electrochemical determination of breast cancer gene sequence (BRCA) hybridization. Amino‐linked BRCA probe highly immobilized onto the caffeic acid modified electrode by means of the interaction between the amino group of BRCA probe and the carboxyl group of caffeic acid compared to the bare electrode. 44 % signal enhancement in guanine oxidation signal was measured by caffeic acid modified electrode. Besides, these probes exhibited high selectivity towards its complementary DNA sequences (target). Hybridization between probe and target (BRCA1) was studied to evaluate the selectivity of the probes for complementary, non‐complementary and mismatch sequences. The selectivity was also tested in the presence of mixture containing the target and one base mismatch BRCA sequences in the same ratio (1 : 1). It can be said this probe can select its complementary from the mixture.