氢气气泡模板电化学诱导沉积纳-微米二级结构钙磷盐生物材料的研究

生物材料的多孔结构对于植入后细胞的响应及其与机体组织的有效整合有着决定性的影响. 采用电化学沉积方法在钛基表面成功制备多孔钙磷盐及钙磷盐/蛋白质复合膜层. 本文选择合适的电解液浓度、温度、电流密度、时间和蛋白质添加剂等,可有效地控制钙磷盐晶体的形状、尺寸和柔韧性,并初步探讨了氢气气泡模板的作用机制. 研究结果表明,动态氢气气泡是一种有效的模板,可控制钙磷盐晶体的生长速度,成功构筑纳-微米二级结构钙磷盐生物材料.     

Control of surface topography in biomimetic calcium phosphate coatings

The behavior of cells responsible for bone formation, osseointegration, and bone bonding in vivo are governed by both the surface chemistry and topography of scaffold matrices. Bone-like apatite coatings represent a promising method to improve the osteoconductivity and bonding of synthetic scaffold materials to mineralized tissues for regenerative procedures in orthopedics and dentistry. Polycaprolactone (PCL) films were coated with calcium phosphates (CaP) by incubation in simulated body fluid (SBF). We investigated the effect of SBF ion concentration and soaking time on the surface properties of the resulting apatite coatings. CaP coatings were examined by scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared spectrometry (FTIR), and energy dispersive X-ray spectrometry (EDX). Young's modulus (E(s)) was determined by nanoindentation, and surface roughness was assessed by atomic force microscopy (AFM) and mechanical stylus profilometry. CaP such as carbonate-substituted apatite were deposited onto PCL films. SEM and AFM images of the apatite coatings revealed an increase in topographical complexity and surface roughness with increasing ion concentration of SBF solutions. Young's moduli (E(s)) of various CaP coatings were not significantly different, regardless of the CaP phase or surface roughness. Thus, SBF with high ion concentrations may be used to coat synthetic polymers with CaP layers of different surface topography and roughness to improve the osteoconductivity and bone-bonding ability of the scaffold.     

Aerosol-Assisted Atmospheric Pressure Cold Plasma Deposition of Organic–Inorganic Nanocomposite Coatings

Low pressure plasma technologies have been widely and successfully utilized for the production of a large variety of organic–inorganic nanocomposite (NC) thin films consisting of metal or metal oxide nanoparticles embedded in a polymer matrix. Recently, the deposition of this class of coatings has been also accomplished by atmospheric pressure cold plasmas using aerosol-assisted processes in which a dispersion containing preformed inorganic nanoparticles and the liquid precursor of the polymeric component is atomized and injected in aerosol form in the atmospheric plasma. This short review is aimed at presenting this approach which is expected to enlarge the range of structures and properties of organic–inorganic NC coatings deposited by cold plasma technologies.     

Polymer-controlled, bio-inspired calcium phosphate mineralization from aqueous solution

Nowadays, the majority of the commercially available calcium phosphate materials is fabricated by 'classical' materials science approaches, i.e., from rather poorly defined slurries or from organic solvents, often at high temperatures and pressures. Bioinspired precipitation of inorganics with (polymeric) additives from aqueous solution, on the other hand, enables the synthesis of intriguing inorganic or organic/inorganic materials that are often much more closely related to biological structures. This article discusses approaches for the fabrication of bio-inspired calcium phosphate hybrid materials by precipitation from aqueous solution. The article focuses on polymers and related self-assembling structures for the design of CaP/organic hybrids and pure CaP with crystal structures and morphologies regulated by the respective additive.     

无机材料的仿生合成

生物矿化重要的特征之一是细胞分泌的有机基质调制无机矿物的成核和生长, 形成具有特殊组装方式和多级结构特点的生物矿化材料(如骨、牙和贝壳)。仿生合成就是将生物矿化的机理引入无机材料合成, 以有机物的组装体为模板, 去控制无机物的形成,制备具有独特显微结构特点的无机材料, 使材料具有优异的物理和化学性能。仿生合成已成为无机材料化学的研究前沿。本文综述了无机材料仿生合成的发展现状。     

Wood surface protection with different alkoxysilanes: a hydrophobic barrier

This paper describes coatings on wood surfaces made by dipping the wood into solutions of different alkoxysilanes. The silanes used as precursors contain different organic groups [R’Si(OR’’)]. These materials tend to deposit as inorganic–organic polymeric films, where the organic groups (aliphatic hydrocarbons, fluorinated hydrocarbons or aromatic substituents) show hydrophobic properties, which reduce the wettability of the surface. The effects of these treatments on the wood surface were extensively studied using various analytical techniques: scanning electron microscopy with energy dispersive X-ray spectrometry, Fourier transform infrared spectroscopy, nuclear magnetic resonance spectroscopy, water contact angle measurements, and flame resistance tests. The resulting data show that the chemical treatment changes the wood’s surface energy, reducing its wettability and reaction to fire. The main innovative finding of this research is that the coatings obtained from a cheaper precursor have a similar performance to that of the more expensive precursors normally used.     

Inorganic–organic sol gel hybrid coatings for corrosion protection of metals

Inorganic–organic hybrid coatings by sol–gel process are very suitable for fighting corrosion. Inorganic sols in hybrid coatings not only increase adhesion by forming chemical bonds between metals and hybrid coatings, but also improve comprehensive performances of polymer in the coatings. Different organic polymers or organic functionalities are introduced into gel network to achieve tailored properties, such as hydrophobic properties, increasing cross-linking density, etc. As for corrosion protection of metals organic components of hybrid coatings are selected to repel water and form dense thick films and reduce coating porosity. The factors, such as the ratio of inorganic and organic components, cure temperature, pigments in hybrid coatings, need to be optimized for attaining hybrid films with the maximum corrosion resistance. Electro-deposition technique offers relatively thick homogeneous defect-free hybrid coatings in comparison to dip or spin coating techniques. Green cerium ions and non-ionizable organic inhibitors are more developed in hybrid coatings nowadays than other corrosion inhibitors. Long-term corrosion resistance techniques of inhibitors are discussed. The inhibitors entrapped in the nanocontainers are doped in hybrid films to prolong release of the inhibitors to damaged zones, which is discussed in detail. Among all the nanocontainers of corrosion inhibitors the prospective techniques which show superior corrosion protection are cyclodextrin/organic inhibitor inclusion complexes and layer by layer assembly of organic corrosion inhibitors in nanocontainers. Super-hydrophobic property of hybrid coatings derives from low surface tension and surface roughness of hybrid coatings, which endues the films with excellent corrosion protection for metals, but the durable property of super-hydrophobic coatings needs to be improved for industrial application. An ideal multiple model of hybrid coatings for superior anti-corrosion of metals proposed is a combination of super-hydrophobic hybrid coatings and underlying hybrid coatings doped with sustained release of corrosion inhibitors on metal substrates.     

Plasma-enhanced copolymerization of amino acid and synthetic monomers

In this paper we report the use of plasma-enhanced chemical vapor deposition (PECVD) for the simultaneous deposition and copolymerization of an amino acid with other organic and inorganic monomers. We investigate the fundamental effects of plasma-enhanced copolymerization on different material chemistries in stable ultrathin coatings of mixed composition with an amino acid component. This study serves to determine the feasibility of a direct, facile method for integrating biocompatible/active materials into robust polymerized coatings with the ability to plasma copolymerize a biological molecule (L-tyrosine) with different synthetic materials in a dry, one-step process to form ultrathin coatings of mixed composition. This process may lead to a method of interfacing biologic systems with synthetic materials as a way to enhance the biomaterial-tissue interface and preserve biological activity within composite films.     

Electrophoretic Deposition of Hydroxyapatite from Non-aqueous Media

Hydroxyapatite Ca₁₀(PO₄)₆(OH)₂ (HA) is an important material for bone and tooth implants, as its chemical composition is similar to that of bone tissue. Owing to the inferior mechanical properties of HA, significant research activity has been associated with the development of HA coatings and composites. The interest in electrophoresis for biomedical applications steins from a variety of reasons such as the possibility of deposition of stoichiometric, high purity material to a degree not easily achievable by other processing techniques and the possibility of forming coatings and bodies of complex shape^[1]. In this work, the experimental results of a study of electrophoretic deposition of HA powders, performed in isopropyl alcohol or ethanol as a suspension medium, are reported.     

Plasma enhanced aerosol–gel method: a new way of preparing ceramic coatings

The sol–gel process is widely used for the production of powders, coatings and bulk materials. However, being a wet-chemical technique, it has certain limitations related to properties of aqueous colloidal solution, especially when applied as a coating. The most frequently used methods, such as dip- and spin-coating, are difficult to apply onto more complex substrates. In these cases, the aerosol–gel deposition method can be regarded as the solution of this problem. In the present article, a novel plasma enhanced aerosol–gel method of coatings production is presented. A novelty of this method is based on an integration of the aerosol–gel deposition of thin films and their low temperature plasma treatment. Owing to the above, all stages of the coatings production process—substrate preparation, film deposition, and its plasma treatment, can be carried out in a single reactor. The design and operational scheme of such device is presented in this work. Using this device, thin coatings were first deposited on substrates and then plasma treated. The effect of deposition and plasma discharge conditions on morphology and chemical structure of the films has been studied. It was found that plasma treatment had a substantial influence on all the examined properties of the aerosol–gel deposited coatings.     

Surface modification of confined microgeometries via vapor-deposited polymer coatings

The development of generally applicable protocols for the surface modification of complex substrates has emerged as one of the key challenges in biotechnology. The use of vapor-deposited polymer coatings may provide an appealing alternative to the currently employed arsenal of surface modification methods consisting mainly of wet-chemical approaches. Herein, we demonstrate the usefulness of chemical vapor deposition polymerization for surface modification in confined microgeometries with both nonfunctionalized and functionalized poly(p-xylylenes). For a diverse group of polymer coatings, homogeneous surface coverage of different microgeometries featuring aspect ratios as high as 37 has been demonstrated based on optical microscopy and imaging X-ray photoelectron spectroscopy. In addition, height profiles of deposited polymer footprints were obtained by atomic force microscopy and imaging ellipsometry indicating continuous transport and deposition throughout the entire microchannels. Finally, the ability of reactive coatings to support chemical binding of biological ligands, when deposited in previously assembled microchannels, is demonstrated, verifying the usefulness of the CVD coatings for applications in micro/nanofluidics, where surface modifications with stable and designable biointerfaces are essential. The fact that reactive coatings can be deposited within confined microenvironments exhibits an important step toward new device architectures with potential relevance to bioanalytical, medical, or "BioMEMS" applications.     

Topography and surface energy dependent calcium phosphate formation on Sol-Gel derived TiO2 coatings

Heterogeneous nucleation and growth of calcium phosphate (CaP) on sol-gel derived TiO(2) coatings was investigated in terms of surface topography and surface energy. The topography of the coatings was derived from AFM measurements, while the surface energy was determined with contact angle measurements. The degree of precipitation was examined with scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS). The precipitation of CaP was found to be dependent on both topography and surface energy. A high roughness value when combining the RMS roughness parameter S(q) with the number of local maxima per unit area parameter S(ds) enhances CaP formation. The hydrophilicity of the coating was also found to be of importance for CaP formation. We suggest that the water contact angle, which is a direct measure of the hydrophilicity of the surface, may be used to evaluate the surface energy dependent precipitation kinetics rather than using the often applied Lewis base parameter.     

Polymer/colloid surface micromachining: micropatterning of hybrid multilayers

Fabrication of multicomponent patterned films comprising polymer/nanoparticle multilayers using conventional lithography and bottom-up layer-by-layer nanofabrication techniques is described. The work is motivated by the potential to extend polymer surface micromachining capabilities toward construction of integrated systems by connecting discrete domains of active materials containing functional nanoparticles. Modified surfaces illustrate tunability of the physical (thickness, roughness, 3D structures) and chemical (inorganic/organic material combinations) properties of the nanocomposite micropatterns. Intriguing nanoscale phenomena were observed for the structures when the order of material deposition was changed; the final multilayer thickness and surface roughness and mechanical integrity of the patterns were found to be interdependent and related to the roughness of layers deposited earlier in the process.     

微图案化钙磷盐膜层的电化学构筑及其生物性能

基于表面分子自组装和光催化转印技术,在TiO2膜层表面获得超亲/超疏水阵列微图案模板,结合电化学沉积技术,成功制备了微图案化钙磷盐膜(CaP)层.扫描电子显微镜(SEM)和电子探针分析(EPMA)结果表明,通过超亲/超疏水阵列微图案模板可构筑高空间分辨的微图案化钙磷盐膜层.微图案化钙磷盐膜层的体外MG-63细胞培养证实,细胞对钙磷盐膜层微单元有强烈的选择性粘附作用,从而可望控制细胞在微单元中的贴壁生长,实现高通量评价细胞行为.     

An Effective Osteogenesis Porous CaP/Collagen Interface Compatible with Various Substrates Fabricated by Controlled Mineralization in a Delicately Adjustable Organic Matrix

Increasing bone formation on the surfaces of implants such as screws, plates, or shims holds great significance for clinical medicine. However, osteogenesis implant coatings that mimic natural bone in terms of both their components and structural features are still lacking. Here we report the biomimetic interface of calcium phosphate (CaP) in a collagen matrix fabricated by controlled mineralization that presents biomimetic porous features. The porous CaP/collagen interface, with a thickness of about 1 μm, significantly enhances osteogenesis, as verified at both the gene and protein levels as well as by in vivo experiments. Taking advantage of the generality of the method, the biomimetic interface was prepared on a variety of substrates, including conductive substrates, 3D metal meshes, plastic or elastic substrates, and even on filter papers. The adjustability and generality of the method have enabled new characterization tests to be developed during experiments on cells and thus should greatly facilitate clinical medicine and tissue engineering.     

Inorganic membranes and solid state sciences

The latest developments in inorganic membranes are closely related to recent advances in solid state science. Sol–gel processing, plasma-enhanced chemical vapor deposition and hydrothermal synthesis are methods that can be used for inorganic membrane preparation. Innovative concepts from material science (templating effect, nanophase materials, growing of continuous zeolite layers, hybrid organic–inorganic materials) have been applied by our group to the preparation of inorganic membrane materials. Sol–gel-derived nanophase ceramic membranes are presented with current applications in nanofiltration and catalytic membrane reactors. Silica membranes with an ordered porosity, due to liquid crystal phase templating effect, are described with potential application in pervaporation. Defect-free and thermally stable zeolite membranes can be obtained through an original synthesis method, in which zeolite crystals are grown inside the pores of a support. Hybrid organic–inorganic materials with permselective properties for gas separation and facilitated transport of solutes in liquid media, have been successfully adapted to membrane applications. Potential membrane developments offered by CVD deposition techniques are also illustrated through several examples related to the preparation of purely inorganic and hybrid organic–inorganic membrane materials.     

UV curing of organic–inorganic hybrid coating materials

The effect of UV-curing time on the mechanism of interaction between the various precursor phases in a novel sol–gel-derived organic–inorganic hybrid coating material and the resulting mechanical and thermal properties of this material when coated onto substrates in thin film form have been examined using a variety of chemical and physical characterisation methods. Microstructurally, the hybrid coating materials examined were all a single amorphous phase and were all optically transparent. The degree of interaction between the organic and inorganic phases, the scratch behaviour of the coating materials and the thermal stability of the coating materials were all found to depend strongly on the UV curing time. For the particular proportions of inorganic and organic components used to make up this hybrid coating material, an optimum UV curing time of 10 min under a UV intensity of 46.3 mW cm⁻² was found to produce transparent coatings which adhered well to the substrates and which were robust in scratch tests on aluminium and polycarbonate substrates and abrasion tests on polycarbonate substrates.     

Caractérisation de revêtements PVD dans le Système V-C-N-O et comparaison avec les propriétés de revêtements similaires obtenus par OMCVD

Vanadium nitride, carbide, carbonitride and oxycarbide coatings were produced on steel substrates, by reactive magnetron sputtering from a vanadium target or by chemical vapor deposition using vanadocene as an organometallic precursor. The composition and crystallographic structure of coatings were determined by different techniques. The mechanical characteristics of the coatings are highly dependent on both their composition and the deposition technique.     

Monofunctionalized Gold Nanoparticles Stabilized by a Single Dendrimer Form Dumbbell Structures upon Homocoupling

The assembly of dumbbell structures as organic-inorganic hybrid materials is presented. Gold nanoparticles (NPs) with a mean diameter of 1.3 nm were synthesized in very good yields using a stabilizing dendrimer based on benzylic thioether subunits. The extended dendritic ligand covers the NP surface and contains a peripheral protected acetylene, providing coated and monofunctionalized NPs. These NPs themselves can be considered as large molecules, and thus, applying a wet-chemical deprotection/oxidative acetylene coupling protocol exclusively provides dimers of NPs interlinked by a diethynyl bridge. The concept not only enables access to novel organic/inorganic hybrid architectures but also promises new approaches in labeling technology.     

Development of a biologically relevant calcium phosphate substrate for sum frequency generation vibrational spectroscopy

A novel biologically relevant composite substrate has been prepared consisting of a calcium phosphate (CaP) layer formed by magnetron sputter-coating from a hydroxyapatite (HA) target onto a gold-coated silicon substrate. The CaP layer is intended to mimic tooth and bone surfaces and allows polymers used in oral care to be deposited in a procedure analogous to that used for dental surfaces. The polymer cetyl dimethicone copolyol (CDC) was deposited onto the CaP surface of the substrate by Langmuir Blodgett deposition, and the structure of the adsorbed layer was investigated by the surface specific technique of sum frequency generation (SFG) vibrational spectroscopy. The gold sublayer provides enhancement of the SFG signal arising from the polymer but plays no part in the adsorption of the polymer. The surface morphology of the substrate was investigated using SEM and AFM. The surface roughness was commensurate with that of the thermally evaporated gold sublayer and uniform over areas of at least 36 mum(2). The chemical composition of the CaP-coated surface was determined by FTIR and TOF-SIMS. It was concluded that the surface is primarily calcium phosphate present as a mixture of amorphous, non-hydroxylated phases rather than solely stoichiometric hydroxyapatite. The SFG spectra from CDC on CaP were closely similar, both in resonance wavenumbers and in their relative intensities, with spectra of thin films of CDC recorded directly on gold. Application of previous analysis of the spectra of CDC on gold therefore enabled interpretation of the polymer orientation and conformation on the CaP substrate.