Mixed convection boundary layer flow over a horizontal plate with thermal radiation

The effects of thermal radiation and thermal buoyancy on the steady, laminar boundary layer flow over a horizontal plate is investigated. The plate temperature is assumed to be inversely proportional to the square root of the distance from the leading edge. The set of similarity equations is solved numerically, and the solutions are given for some values of the radiation and buoyancy parameters for Prandtl number unity. It is found that dual solutions exist for negative values of the buoyancy parameter, up to certain critical values. Beyond these values, the solution does no longer exist. Moreover, it is found that there is no local heat transfer at the surface except in the singular point at the leading edge. The radiation parameter is found to increase the local Stanton number.     

Mixed convection boundary layer flow of a viscoelastic fluid over a horizontal circular cylinder

The steady mixed convection boundary layer flow of a viscoelastic fluid over a horizontal circular cylinder in a stream flowing vertically upwards is numerically studied for both cases of heated and cooled cylinders. The governing partial differential equations are transformed into dimensionless forms using an appropriate transformation and then solved numerically using the Keller-box method. The comparison between the solutions obtained and those for a Newtonian fluid is found to be very good. Effects of the mixed convection and elasticity parameters on the skin friction and heat transfer coefficients for a fluid having the Prandtl number equal to one are also discussed. It is found that for some values of the viscoelastic parameter and some negative values of the mixed convection parameter (opposing flow) the boundary layer separates from the cylinder. Heating the cylinder delays separation and can, if the cylinder is warm enough, suppress the separation completely. Similar to the case of a Newtonian fluid, cooling the cylinder brings the separation point nearer to the lower stagnation point. However, for a sufficiently cold cylinder there will not be a boundary layer.     

Free convection boundary layer flow of a micropolar fluid past slender cones

Using the theory of micropolar fluids developed by Eringen, the transverse curvature effects on axisymmetric free convection boundary layer flow of a micropolar fluid past slender vertical cones are investigated. The case of constant surface heat flux is considered in this paper. Using perturbation techniques, the governing equations for momentum, angular momentum and energy have been solved numerically. Graphical representations for the velocity, angular velocity and thermal functions are presented for various physical and fluid property parameters.     

Mixed convection boundary layer flow on a continuous flat plate with variable viscosity

The influences of variable viscosity and buoyancy force on laminar boundary layer flow and heat transfer due to a continuous flat plate are examined. The deviation of the velocity and temperature fields as well as of the skin friction and heat transfer results from their constant values are determined by means of similarity solutions.     

Mixed convection boundary layer flow over a horizontal circular cylinder with Newtonian heating

The steady mixed convection boundary layer flow over a horizontal circular cylinder, generated by Newtonian heating in which the heat transfer from the surface is proportional to the local surface temperature, is considered in this study. The governing boundary layer equations are first transformed into a system of non-dimensional equations via the non-dimensional variables, and then into non-similar equations before they are solved numerically using a numerical scheme known as the Keller-box method. Numerical solutions are obtained for the skin friction coefficient Re ^1/2 C _f and the local wall temperature θ _w (x) as well as the velocity and temperature profiles with two parameters, namely the mixed convection parameter λ and the Prandtl number Pr.     

Mixed convection flow of a micropolar fluid with radiation and chemical reaction

Effects of heat and mass transfer on the mixed convection flow of a magnetohydrodynamic (MHD) micropolar fluid bounded by a stretching surface have been investigated. Homotopy analysis procedure is adopted for computations of a set of coupled nonlinear ordinary differential equations. Numerical values of skin friction coefficient and Nusselt and Sherwood numbers are worked out. A comparative study is provided with the limiting available numerical solution. Copyright © 2010 John Wiley & Sons, Ltd.     

Mixed convection flow of a micropolar fluid over a stretching sheet

The mixed convective flow of a steady, incompressible micropolar fluid over a stretching sheet has been studied. This situation may arise in polymer technology involving the stretching of plastics sheets. The resulting system of non-linear ordinary coupled differential equations has been solved by the finite element method, using the variational Ritz model. Numerical results obtained for velocity, microrotation and temperature distributions are shown graphically. It was found that an increase in the micropolar parameter leads to a faster rate of cooling of the sheet. Also the velocity increases with an increase in micropolar effects. Microrotation effects are much smaller for the no-spin boundary condition as compared to the other boundary condition which assumes that the gyration vector is identical to the angular velocity of the fluid. Received on 9 February 1998     

Analytic study on non-Newtonian natural convection boundary layer flow with variable wall temperature on a horizontal plate

The similarity transform for the steady free convection boundary layer flow of a non-Newtonian fluid (Casson model) with variable wall temperature on a horizontal plate gives a system of nonlinear ordinary differential equations which is solved analytically by applying a newly developed method namely the homotopy analysis method (HAM). The velocity and temperature profiles are obtained and the influence of Prandtl number and various physical parameters of the problem on these distributions are discussed in detail and are illustrated graphically through a set of graphs. The validity of our solutions is verified by the numerical results.     

Numerical solutions of free convection boundary layer flow on a solid sphere with Newtonian heating in a micropolar fluid

In this paper, the problem of free convection boundary layer flow on a solid sphere in a micropolar fluid with Newtonian heating, in which the heat transfer from the surface is proportional to the local surface temperature, is considered. The transformed boundary layer equations in the form of partial differential equations are solved numerically using an implicit finite-difference scheme. Numerical solutions are obtained for the local wall temperature, the local skin friction coefficient, as well as the velocity, angular velocity and temperature profiles. The features of the flow and heat transfer characteristics for different values of the material or micropolar parameter K, the Prandtl number Pr and the conjugate parameter γ are analyzed and discussed.     

Transient free convection with mass transfer MHD micropolar fluid in a porous plate by the network method

The transient problem of coupled heat and mass transfer of a micropolar fluid in magneto‐hydrodynamic free convection from a vertical infinite porous plate with an exponentially decaying heat generating considering the viscous dissipation and ohmic heating effects is studied. Joule heating must be considered when the viscous dissipation and the Prandtl number are large. The non‐dimensional equations for the conservation of mass, momentum, energy and concentration are solved by means a numerical technique based on electric analogy (network simulation method). This method provides the numerical response of the system by running the network in circuit resolution software with the solution to both transient and steady‐state problems at the same time, and its programming does not require manipulation of the sophisticated mathematical software that is inherent in other numerical methods. The effects of the material parameters, viscous dissipation, internal generation and Joule heating on velocity, angular momentum and temperature fields across the boundary layer are investigated. In addition, the skin‐friction coefficient, couple stress coefficient, Nusselt number and Sherwood number are shown in tabular form. The numerical results for velocity and temperature distributions of micropolar fluids are compared with the corresponding flow problems for a Newtonian fluid. Copyright © 2007 John Wiley & Sons, Ltd.     

Two-dimensional convection in a horizontal fluid layer with spatially periodic boundary temperatures

Two-dimensional thermal convection in a fluid layer confined between two horizontal rigid walls kept at spatially periodic temperatures is investigated by direct numerical simulations. With increasing the Rayleigh number, convection evolves from a steady state to a temporally chaotic flow. It is observed that the transition to the chaos occurs via quasi-periodic states with two or three basic frequencies or via sequences of period-doubling bifurcations, according to the boundary temperature distributions.     

Mixed convection boundary layer flow past a wedge with permeable walls

The effects of suction/injection on steady laminar mixed convection boundary layer flow over a permeable horizontal surface of a wedge in a viscous and incompressible fluid is considered in this paper. The similarity solutions of the governing boundary layer equations are obtained for some values of the suction/injection parameter f ₀, the constant exponent m of the wall temperature as well as the mixed convection parameter λ. The resulting system of nonlinear ordinary differential equations is solved numerically for both assisting and opposing flow regimes using an implicit finite-difference scheme known as the Keller-box method. Numerical results for the reduced skin friction coefficient, the local Nusselt number, and the velocity and temperature profiles are obtained for various values of parameters considered. Dual solutions are found to exist for the case of opposing flow.     

Mixed convection boundary-layer flow on a horizontal flat surface with a convective boundary condition

The steady mixed convection boundary-layer flow on an upward facing horizontal surface heated convectively is considered. The problem is reduced to similarity form, a necessary requirement for which is that the outer flow and surface heat transfer coefficient are spatially dependent. The resulting similarity equations involve, apart from the Prandtl number, two dimensionless parameters, a measure of the relative strength of the outer flow M and a heat transfer coefficient γ. The free convection, M=0, case is considered with the asymptotic limits of large and small γ being derived. Results for the general, M>0, case are presented and the asymptotic limit of large M being treated.     

Mixed convection stagnation point flow of a micropolar fluid towards a stretching sheet

The mixed convection two-dimensional boundary layer flow of a micropolar fluid near the stagnation point on a stretching vertical sheet is investigated. The stretching velocity and the surface temperature are assumed to vary linearly with the distance from the stagnation point. The transformed ordinary differential equations are solved numerically for some values of the parameters involved using a finite-difference scheme known as the Keller-box method. The features of the flow and heat transfer characteristics are analyzed and discussed. Both assisting and opposing flows are considered. Results are presented in terms of the skin friction coefficient and the local Nusselt number with selections of velocity, microrotation and temperature profiles. Dual solutions are found to exist for the opposing flow.     

Similarity analysis of axisymmetric free convection on a horizontal infinite plate subject to a mixed thermal boundary condition in a micropolar fluid

Similarity analysis of the problem of axisymmetric free convection on a horizontal infinite plate of a micropolar fluid is considered assuming that the plate is subjected to a mixed thermal boundary condition. It is shown that the thermal boundary condition is characterized by a positive parameter m and the two cases of m = 0 and m = 1 correspond to prescribed plate temperature and prescribed surface heat flux respectively. If one has to compute the heat transfer coefficient for various values of m, there is no need to solve the boundary value problem every time; it is enough to solve a certain polynomial equation provided the solution is known for any particular value of m. Received on 3 November 1998     

Effects of large suction in natural convection boundary layer on a horizontal plate

The natural convection boundary layer on a horizontal plate with suction is investigated. The similar solutions of the boundary layer equations require suction to vary as a power law. The similarity equations have been integrated for various values of suction parameter and Prandtl number =0.72 and 6.8. For non-similar flow situation, a large suction approximation has been developed using the asymptotic approach. It is shown that large suction approximation is surprisingly good even for moderate values of suction parameter.

---

Einflüsse großer Wirkung auf die Grenzschicht bei freier Konvektion an einer horizontalen Platte

Zusammenfassung Es wird die Grenzschicht bei freier Konvektion auf einer horizontalen Platte unter Saugwirkung untersucht. Die Ähnlichkeitslösungen der Grenzschichtgleichungen machen es erforderlich, die Saugwirkung in Form eines Exponentialansatzes zu variieren. Die Ähnlichkeitsgleichungen wurden für verschiedene Werte des Saugparameters und für Prandtl-Zahlen zwischen 0,72 und 6,8 integriert. Für nicht-ähnliche Strömungszustände wurde eine Lösung für die Saugwirkung auf der Basis der asymptotischen Näherung entwickelt. Es wird gezeigt, daß die Näherungslösung für große Saugwirkung auch erstaunlich gute Ergebnisse für geringe Werte von Saug-Parametern liefert.

     

Mixed convection boundary layer flow near stagnation-point on vertical surface with slip

This paper considers the steady mixed convection boundary layer flow of a viscous and incompressible fluid near the stagnation-point on a vertical surface with the slip effect at the boundary. The temperature of the sheet and the velocity of the external flow are assumed to vary linearly with the distance from the stagnation-point. The governing partial differential equations are first transformed into a system of ordinary differential equations, which are then solved numerically by a shooting method. The features of the flow and heat transfer characteristics for different values of the governing parameters are analyzed and discussed. Both assisting and opposing flows are considered. The results indicate that for the opposing flow, the dual solutions exist in a certain range of the buoyancy parameter, while for the assisting flow, the solution is unique. In general, the velocity slip increases the heat transfer rate at the surface, while the thermal slip decreases it.     

Thermal boundary layer and the characteristic length on natural convection over a horizontal plate

Thickness of the thermal boundary layer on natural convection from a horizontal plate was experimentally measured and expressed as a function of Rayleigh number both in laminar and turbulent regimes. Several parametric equations expressing the Nusselt number as a function of Rayleigh number were developed combining experimental data by other authors with the ones obtained in this work. The characteristic length was taken as the thickness of the thermal boundary layer in one equation and as the ratio of the area to the perimeter in another one. Both characteristic lengths correlated the data precisely in wide ranges of Rayleigh numbers.

---