采用碳化-沉淀法制备纤维状纳米Mg(OH)_2的研究

本文以轻烧白云石粉料为原料,用碳化法制备出碱式碳酸镁,酸化后以氨水为沉淀剂,用化学沉淀法制得Mg(OH)2,用乙二胺对制得的Mg(OH)2进行后处理,制得纤维状纳米Mg(OH)2。用SEM、XRD和TG-DTA对制得的Mg(OH)2进行表征。XRD结果表明重结晶温度180℃以上可以得到具有完整晶体结构的Mg(OH)2。SEM结果显示Mg(OH)2颗粒的尺寸随着乙二胺加入量的增大而增大。当Mg(OH)2的重结晶时间超过21 h后,可以得到直径20~30 nm,长度400~700 nm的纤维状Mg(OH)2。TG-DTA表明Mg(OH)2在318~416℃分解为MgO。     

一种基于乙二胺-丁二醇体系的新颖的二氧化碳捕集利用方法

在温和条件下,发展了一种以丁二醇-乙二胺体系新颖、高效地固定CO₂的方法。在此方法中,CO₂被快速激活并转化为一种固态的CO₂储集材料（CO₂SM）,通过XPS、XRD、FTIR和¹³C NMR等技术表征证实为烷基碳酸胺。基于TGA结果,CO₂SM的水溶液可以与Ca（OH）₂和Ba（OH）₂反应制备CaCO₃和BaCO₃微粒,还可用于循环吸收和解吸CO₂的过程。此外,丁二醇-乙二胺水溶液在20 ℃下吸收CO₂并在98.6 ℃下解吸CO₂,没有明显的溶液损失。因此,丁二醇-乙二胺体系提供了一种绿色、高效、低成本的二氧化碳捕集利用方法。     

MgSO4·5Mg(OH)2·3H2O的水热合成及反应时间对其形貌的影响

Both whisker and nanometer MgSO₄·5Mg(OH)₂·3H₂O(MOS) were prepared by hydrothermal method at 140℃ for different times， using NaOH and MgSO₄·7H₂O as raw materials. The MgSO₄·5Mg(OH)₂·3H₂O part- icles were characterized by powder X-ray diffraction(XRD)，thermal analysis(TGA-DSC)， infrared spectroscopy(FT-IR)，transmission electron microscopy(SEM) and scanning electron microscopy(TEM). The size distribution in whisker-like and nanocrystalline materials are in the range of 10～50μm and 10～20nm respectively. The whisker MOS is metastable phase in MgSO₄-NaOH-H₂O system at 140℃，whereas nanometer MOS is stable phase.     

新原料路线共沉淀法组装超分子结构柠檬酸根插层水滑石

以Mg(OH)₂和NaAlO₂为原料，采用新原料路线共沉淀法实现了柠檬酸根插层结构LDHs的超分子组装。用XRD、FT-IR、TG-DTA和元素分析等手段对样品进行分析表征。结果表明，新原料路线共沉淀法较常用的共沉淀法得到的柠檬酸根插层LDHs结晶度高、晶相单一，客体柠檬酸根在LDHs层间的排列高度有序。     

氧化锌表面包覆Sn6O4(OH)4的制备及其在锌镍电池中的应用

采用水热-共沉淀法在氧化锌表面包覆锡化合物,利用扫描电子显微镜（SEM）、X射线衍射（XRD）和能谱分析对制备的包覆ZnO材料进行表征。结果表明：XRD表明附着在氧化锌表面的是Sn₆O₄（OH）₄,且结晶度较好;SEM测试显示在pH=12条件下,Sn₆O₄（OH）₄能够很好地附着在氧化锌颗粒表面;能谱分析显示组成物中的元素包含Zn、Sn、O三种元素。利用循环伏安曲线、电化学阻抗谱（EIS）、倍率充放电技术对包覆ZnO材料进行了电化学性能的测试,结果表明：包覆Sn₆O₄（OH）₄的ZnO可以提高锌负极的耐蚀性能,增大电荷转移电阻（R_ct）;锌电极覆Sn₆O₄（OH）₄量为3%时充放电效率最佳,在0.2C充放循环40次后充放电循环保持率仍有70%。     

介孔锆柱撑钛酸盐材料的制备、表征及光催化性能

采用单分子层剥离-重堆积技术将聚合羟基锆离子嵌入到钛酸盐板层间,制得层间距为1.92~2.01nm的介孔钛酸盐柱撑复合材料。X-射线衍射（XRD）、热重-示差扫描热分析（TG-DSC）、扫描/透射电镜（SEM/HR-TEM）和N₂吸附等手段对材料物化性质进行了分析。结果表明,客体锆离子主要以[Zr₄（OH）_16-n（H₂O）_8+n]n⁺（记为Zr₄）的形式存在于主体层间域中,且柱撑体系中n_Zr/n_Ti比越小,越有利于获得层间距和比表面积较大的柱撑材料。紫外光降解亚甲基蓝实验表明,柱撑材料对亚甲基蓝降解率为钛酸盐主体的3.5倍,这与柱撑形成的介孔结构以及主客体间的电子耦合有关;350℃热处理后材料对亚甲基蓝的降解率进一步提高,说明主客体间形成了更有效的欧姆接触。     

TiO2纳米纤维无纺布的制备及光催化性能研究

以聚乙烯吡咯烷酮(PVP)作为配位剂与钛酸正丁酯(Ti(C₄H₉O)₄)反应制得前驱体，再以乙醇为溶剂，CH3COOH作为催化剂，采用静电纺丝法制得PVP/TiO₂复合纳米纤维，经550 ℃、700 ℃和900 ℃焙烧后分别得到以锐钛矿型的TiO₂为主、以金红石型TiO₂为主和完全金红石晶型的TiO₂纳米纤维。对所制得的纳米纤维的结晶度、纯度和形貌，分别采用差热-热重分析(TG-DTA)、红外光谱(IR)、X射线粉末衍射(XRD)、扫描电镜(SEM)等进行了表征。光降解苯酚水溶液的实验结果表明，550 ℃下煅烧得到的以锐钛矿占主体的TiO₂纳米纤维，2 h使浓度为50 mg·L^-1苯酚水溶液的降解率超过85%，这充分说明这种TiO₂电纺纳米纤维具有良好的光催化性能。     

(Pr0.9La0.1)2(Ni0.74Cu0.21Ga0.05) O4+δ纳米纤维阴极的制备及电化学性质

采用静电纺丝法制备了（Pr_0.9La_0.1）₂（Ni_0.74Cu_0.21Ga_0.05）O_4+δ（PLNCG）氧化物纳米纤维。利用热重-差热分析（TG-DTA）、X射线衍射（XRD）、傅里叶变换红外光谱（FT-IR）和扫描电子显微镜（SEM）对材料的物相及微观形貌进行分析。研究表明950℃煅烧5 h得到平均直径420 nm、形貌均一的PLNCG氧化物纤维;1 000℃烧结2 h得到紧密附着在Ce_0.9Gd_0.1O_2-δ（CGO）电解质上的网状结构纤维阴极。电化学阻抗谱（EIS）测试结果表明纳米纤维阴极具有比粉体阴极更优越的性能。700℃的极化电阻（R_P）为0.134 Ω·cm²,比同组分的粉末阴极减少32%（R_P=0.197 Ω·cm²）。以纤维阴极构筑的电解质支撑单电池Ni-CGO/CGO/PLNCG在700℃的最大输出功率密度为231 mW·cm^-2。氧分压测试结果表明阴极反应的速率控制步骤为电荷转移过程。     

单元和多元取代纳米氢氧化镍晶相及其结构稳定性研究

以硝酸镍为镍源,硫酸钴、硫酸铜、硫酸铝为掺杂原料,采用超声波辅助沉淀法分别制备了单元和多元取代纳米氢氧化镍。用X射线衍射（XRD）、傅里叶变换红外光谱（FTIR）、激光粒度仪（PSD）及电子显微镜（TEM、SEM）对样品晶相结构、形貌、粒度分布等进行了表征,研究了单元或多元取代对产物晶相及其结构稳定性的影响。结果表明,样品均为纳米级Ni（OH）₂,随着掺杂元素种类的增多,其一次粒子变得细小,团聚加重,二次粒子粒径增大。样品中α-Ni（OH）₂比例随取代元素增多而增大。相对于Co单元和Co/Cu双元取代,Co/Cu/Al三元取代的样品其晶相结构更稳定,在碱液中浸泡3周后仍为纯α-Ni（OH）₂。在相同掺杂比例下,Cu取代比Co取代更有利于α-Ni（OH）₂的生成,但Co取代的样品结构稳定性优于Cu取代的样品。     

碱式氯化镁5Mg(OH)2·MgCl2·3H2O的制备与表征

以氨水和盐湖盛产的水氯镁石为原料经过两步反应制备碱式氯化镁。第一步,水氯镁石和氨水反应制备氢氧化镁;第二步,利用氢氧化镁和水氯镁石,通过水热反应得到了具有纤维形貌、结晶较好的碱式氯化镁。应用化学分析、XRD、SEM和FIIR等手段对产物进行测试与表征。化学分析结果表明产物组成为5Mg(OH)₂·MgCl₂·3H₂O。将得到的5Mg(OH)₂·MgCl₂·3H₂O和碱式氯化镁系列标准XRD图对照,未有较好的匹配,且结合化学分析和已报道碱式硫酸镁具有5Mg(OH)₂·MgSO₄·3H₂O物相,因而推测其为新物相;SEM图中5Mg(OH)₂·MgCl₂·3H₂O纤维直径约为0.4 μm,平均长度大于24 μm,长径比大于60;FTIR图谱中3 419 cm^-1附近出现了氢键的O-H伸缩振动吸收峰,1 635 cm^-1附近出现了游离水中H-O-H的弯曲振动吸收峰。水热合成的5Mg(OH)₂·MgCl₂·3H₂O和常压下的产物相比直径较小,晶形更完整,强度更高。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.