One-off writing of multimicrogratings on glass by two interfered femtosecond laser pulses

Multimicrogratings are one-off written on silicate glass by two interfered femtosecond pulsed laser beams with the aid of a mask. The period and depth of the multimicrogratings are revealed by optical microscopy and atomic force microscopy. The depth is dependent on both the colliding angle between the two interfered laser beams and the laser pulse energy, but the period relies on the colliding angle only. We also observe a series of grooves formed at the middle of each bulge of the multimicrogratings and attribute it to the higher-order modulation arising from second-harmonic generation of the femtosecond laser pulse during the one-off writing processes.     

Modulation grating achieved by two interfered femtosecond laser pulses on the surface of the silica glass

Modulation grating has been achieved by two interfered femtosecond laser pulses on the surface of the silica glass. The modulation grating formed at the middle of each bulge of the common grating and was attributed to the higher-order modulation arising from second-harmonic generation (SHG) of the femtosecond laser pulse incident to the surface of silica glass. The periods and depths of the fundamental grating and the modulation grating have been observed by using an atomic force microscopy (AFM). Experimental results show that the average depth of the modulation grating is nearly a half of the depth of the fundamental grating.     

Generation of multiple femtosecond pulses by step gratings

A simple method for generating multiple isolated femtosecond pulses by step gratings is presented, and a criterion for judging whether or not an incident pulse is just split into multiple independent pulses is obtained. The dependences of multiple pulses on the structural parameters of the step gratings are explored. The results show that an incident pulse can split into multiple isolated similar diffraction pulses for enough step height, and the pulse repetition interval increases with the increasing of the step height.     

用反射式达曼光栅产生飞秒激光双脉冲

采用反射式达曼光栅建立了一种产生飞秒激光双脉冲的新装置.由于采用反射式结构，避免了材料色散和吸收导致的脉冲畸变，并构建了一台二次谐波-频率分辨光学开关装置对产生的双脉冲进行了测量.实验结果表明可以实现脉冲强度相等、时间宽度相同、不同间隔的双脉冲输出.产生双脉冲的装置在飞秒激光领域有着应用的价值. 关键词： 飞秒激光双脉冲 达曼光栅 二次谐波-频率分辨光学开关     

Characterization and dynamics of gratings induced in glasses by femtosecond pulses

We characterize the gratings induced in commercial SF57 glass by femtosecond pulses. A simple technique enables us to measure both the real and the imaginary parts of the refractive index and shows that the induced grating is mainly a phase grating. An index variation of as much as 6x10(-3) is reported. Then we study the diffraction efficiency of the grating with respect to the intensity of the femtosecond pulse. Permanent structures are induced above the damage threshold. Below this threshold, the grating relaxes. The long-time dynamics of the decay is studied and described by two models. The formation of transient and permanent gratings in various other glasses is observed.     

Spectral shaping of femtosecond pulses in aperiodic quasi-phase-matched gratings

We analyze the use of cascading second harmonic interactions in quadratic nonlinear crystals to mould the spectral characteristics of broadband near-infrared femtosecond pulses. Using a genetic algorithm, we optimize the design of the aperiodically poled ferroelectric crystal capable of generating the desired femtosecond infrared pulsed radiation.     

Bragg gratings photoinduced in ZBLAN fibers by femtosecond pulses at 800 nm

Fiber Bragg gratings were written in thulium-doped and undoped single-mode ZBLAN fibers by focusing femtosecond laser pulses on the fiber core through a phase mask. Maximum index modulation of the order of 1 x 10(-3) was induced in both types of fibers. Measurements of the transverse refractive index changes across the core and cladding regions indicate that the grating formation originates from a negative index change.     

Fabrication of long-period fiber gratings by focused irradiation of infrared femtosecond laser pulses

We have fabricated long-period fiber gratings by use of a novel technique using focused irradiation of infrared femtosecond laser pulses. We investigate the thermal stability of the fabricated fiber gratings. The values of the loss peak wavelength and the transmittance of the fiber gratings after heat treatment below 500 degrees C are the same as initial values before heat treatment. The fiber gratings that were fabricated by this technique have a high resistance to thermal decay. We propose that this technique will be useful for fabrication of fiber gratings with a superior aging characteristic.     

Spectral phase correlation of coded femtosecond pulses by second-harmonic generation in thick nonlinear crystals

We demonstrate a novel all-optical scheme for measuring the correlation of spectrally phase-coded ultrashort optical waveforms that uses second-harmonic generation (SHG) in long, periodically poled lithium niobate crystals. The SHG yield can be controlled over a range of ~30 dB, depending on the correlation of the applied phase codes. Such a spectral phase correlator has applications for ultrashort-pulse optical code-division multiple-access networking and could serve as a nonlinear optical but classical analog for certain schemes for coherent quantum control of multiphoton processes.     

基于高重复频率飞秒激光直写技术制作衍射光栅的研究

基于由光子晶体光纤飞秒激光器产生的高重复频率飞秒激光搭建了飞秒激光微加工系统,利用LabVIEW编写程序精密控制三维移动平台的移动路径和高速快门,在加工功率为1.5W、移动速率为1mm/s时,利用直写技术在无胶铬版上得到了微米量级的任意形状的平面衍射光栅。利用CCD相机对光栅制备过程进行实时监视,保证了光栅的加工质量。制备的光栅在显微镜下观察,条纹边缘清晰、线纹粗细均匀。使用He-Ne激光照射加工的光栅,可以获得清晰、稳定、与理论符合很好的夫琅和费(Frauhofer)衍射图样,显示了所加工的光栅具有良好的光学性能。实验结果也表明了光子晶体光纤飞秒激光在光栅制作过程中所具备的良好的加工性能。     

Formation of two-dimensional periodic microstructures by a single shot of three interfered femtosecond laser pulses on the surface of silica glass

Two-dimensional periodic microstructures, including both microholes and micro-orbicular platforms, have been fabricated on the surface of silica glass by a single shot of three interfered femtosecond laser pulses. The three-dimensional structure of a fabricated hexagonal lattice can be revealed by atomic force microscopy. The formation of the microstructure and the dynamic process of the interaction between the femtosecond laser and the silica glass have been discussed.     

Controllable cascaded four-wave mixing by two chirped femtosecond laser pulses

We investigated the generation of cascaded four-wave mixing (CFWM) sidebands by using two crossing chirped femtosecond pulses with the same central wavelength in tellurite glass (Te glass). Sidebands of broadband spectra, which contained non-degenerate and degenerate CFWM signals, were obtained at different delay time between two input pulses. The CFWM sidebands observed on different sides of input beams were flexibly controlled by adjusting the delay time.     

Ablation with femtosecond pulses: The effect of temporal contrast

An inherent property of the ultrashort pulse lasers used presently for materials processing is that the main pulse is accompanied by an amplified spontaneous emission background. The temporal quality of the pulses is characterized by the temporal contrast. Due to the 5-6 orders of magnitude difference in the duration of the main pulse and the pedestal, high intensity contrast does not mean necessarily high enough difference in the respective energies. In materials processing applications consideration of the energy contrast is advisable. The importance of the contrast in determining the ablation process is exemplified by the dependence of the ablation rate of boron carbide on the cleanness of the pulses of a high brightness hybrid dye/excimer laser system. It is shown that serious consideration of the effects of the nanosecond background is mandatory when evaluating the results.     

Fabrication of surface relief gratings on transparent dielectric materials by two-beam holographic method using infrared femtosecond laser pulses

Fabrication of surface relief-type gratings in transparent dielectrics, which are hard to machine, has been achieved by a holographic technique using two infrared femtosecond (fs) pulses from a mode-locked Ti:sapphire laser. The present method can be applied for a variety of transparent dielectrics, Al₂O₃ (sapphire), TiO₂, ZrO₂, LiNbO₃, SiC, ZnO, CdF₂, MgO, CaF₂ crystals, and SiO₂ glass. It is found that the grating formation is due primarily to laser ablation processes. Planar surface relief gratings can be fabricated by colliding two fs laser pulses on the surface of substrates which move at a constant speed, synchronized with the laser repetition rate. Received: 1 March 2000 / Published online: 7 June 2000     

交叉传播激光脉冲与等离子体相互作用产生的等离子体密度光栅

理论上研究了两束交叉传播的激光束与等离子体相互作用产生的电子和离子密度调制. 用一维粒子模拟程序(particle-in-cell,PIC)研究了两束激光脉冲产生的干涉场激发的等离子体布拉格光栅. 研究表明等离子体初始密度、脉冲强度和宽度共同影响等离子体布拉格光栅的演化. 光栅的密度峰值可以达到初始等离子体密度的8倍以上,并且可以维持几皮秒的时间. 等离子体布拉格光栅可以囚禁由受激拉曼散射形成的电磁孤子,从而形成准稳态的孤子结构,很大程度上降低了形成电磁孤子所要求的激光脉冲强度. 关键词： 等离子体布拉格光栅 电磁孤子 交叉传播激光束 粒子模拟     

Inscription of high contrast volume Bragg gratings in fused silica with femtosecond laser pulses

We present volume Bragg gratings (VBGs) with a period of 1.075 μm inscribed in fused silica using a femtosecond laser and a phase mask. The femtosecond-inscribed VBGs can be used as reflecting elements with reflectivities of about 80% for a 1-mm-long grating. Due to the non-sinusoidal refractive-index shape, higher order Bragg resonances up to the 7th reflection order could be measured. Therefore, the Bragg gratings also reflect light in the visible-wavelength range.     

Inscription of fiber Bragg gratings with femtosecond pulses using a phase mask scanning technique

We report on the fabrication of highly efficient fiber Bragg gratings (FBG) in non-photosensitive fibers based on nonlinear absorption of fs laser light. Up to 40 mm long gratings with a transmission of T=-25 dB at the Bragg reflection wavelength were obtained and their coupling constant determined by spectral analysis. Therefore, a phase mask scanning technique with appropriate control of the focus was established. PACS  42.60.-v; 42.62.-b; 42.65.Re; 42.79.Dj; 42.81.-i     

The formation of relativistic electromagnetic solitons in plasma Bragg gratings induced by two counter-propagating laser pulses

The generation of relativistic electromagnetic solitons in plasma with spatiotemporal density modulation is investigated. When two counter-propagating laser pulses overlap in underdense plasma, the interaction between the pulses and plasma modulates the electron and ion densities resulting in localized, stable, long-living relativistic electromagnetic solitons. They are caused by the Stimulated Raman Scattering instability. The dependence of the formation of relativistic electromagnetic solitons on the ion motion, plasma parameters, and laser parameters is studied by particle-in-cell simulations as well.