Surface plasmon resonance immunosensor for bacteria detection

This work describes an approach for the development of two bacteria biosensors based on surface plasmon resonance (SPR) technique. The first biosensor was based on functionalized gold substrate and the second one on immobilized gold nanoparticles. For the first biosensor, the gold substrate was functionalized with acid-thiol using the self-assembled monolayer technique, while the second one was functionalized with gold nanoparticles immobilized on modified gold substrate. A polyclonal anti-Escherichia coli antibody was immobilized for specific (E. coli) and non-specific (Lactobacillus) bacteria detection. Detection limit with a good reproducibility of 10⁴ and 10³ cfu mL⁻¹ of E. coli bacteria has been obtained for the first biosensor and for the second one respectively. A refractive index variation below 5 × 10⁻³ due to bacteria adsorption is able to be detected. The refractive index of the multilayer structure and of the E. coli bacteria layer was estimated with a modeling software.     

A Reagentless Tyrosinase Biosensor Based on 1,6‐Hexanedithiol and Nano‐Au Self‐Assembled Monolayers

An amperometric tyrosinase biosensor was developed via a simple and effective immobilization method using the self‐assembled monolayers (SAMs) technique. The organic monolayer film was first formed by the spontaneous assembly of thiolor sulfur compound (1,6‐hexanedithiol, HDT) from solution onto gold electrode. When these thiol‐rich surfaces were exposed to Au colloid, the sulfurs form strong bonds to gold nanoparticles, anchoring the clusters to the electrode substrate. After the assembly of gold nanoparticles layer, a new nano‐Au surface was obtained. Thus, the tyrosinase could be immobilized onto the electrode. The tyrosinase retained its activity well in such an immobilization matrix. The various experimental variables for the enzyme electrode were optimized. The resulting biosensor can reach 95% of steady‐state current within 10 s, and the trend in the sensitivity of different phenolic compounds was as follows: catechol>phenol>p‐cresol. In addition, the apparent Michaelis–Menten constant (K and the stability of the enzyme electrode were estimated.     

Electrochemical Aptasensor for the Determination of Cocaine Incorporating Gold Nanoparticles Modification

A novel electrochemical aptasensor incorporating a signal enhancement for the determination of cocaine was designed. Gold nanoparticles were self‐assembled onto the surface of a gold electrode through 1,6‐hexanedithiol. A bifunctional derivative of the 32‐base cocaine‐binding aptamer with a redox‐active ferrocene moiety and a thiol linker group at the termini of the strand was self‐assembled onto the surface of gold nanoparticles. The oxidation peak current is linearly related to the concentration of cocaine from 1.0 to 15.0 μM with a detection limit of 0.5 μM. It was found that the sensitivity of the aptasensor with gold nanoparticles modification was ca. 10‐fold higher than that of the aptasensor without gold nanoparticles modification. This work demonstrates that gold nanoparticles‐assembled gold electrode provides a promising platform for immobilizing aptamer and enhancing the sensitivity.     

Magnetic assembled electrochemical platform using Fe2O3 filled carbon nanotubes and enzyme

A novel electrochemical nanostructured biosensor based on carbon nanotubes (CNTs) has been constructed by magnetic assembly method. The magnetic multi-walled carbon nanotubes (M-MWNTs) were prepared by introducing Fe₂O₃ nanoparticles into the nanotubes. Thus the multilayered functional platform could be assembled with the aid of magnetic field. The horseradish peroxidase (HRP) was employed as a model enzyme to demonstrate the final performance of the nanostructured biosensor. SEM, UV–vis spectroscopy and electrochemical techniques were used for characterization of assembly process. The resulting three-dimensional M-MWNTs/HRP multilayer films have showed satisfactory stability, biocompatibility and electrochemical properties.     

Fe2O3@Au core/shell nanoparticle-based electrochemical DNA biosensor for Escherichia coli detection

A Fe₂O₃@Au core/shell nanoparticle-based electrochemical DNA biosensor was developed for the amperometric detection of Escherichia coli (E. coli). Magnetic Fe₂O₃@Au nanoparticles were prepared by reducing HAuCl₄ on the surfaces of Fe₂O₃ nanoparticles. This DNA biosensor is based on a sandwich detection strategy, which involves capture probe immobilized on magnetic nanoparticles (MNPs), target and reporter probe labeled with horseradish peroxidase (HRP). Once magnetic field was added, these sandwich complexes were magnetically separated and HRP confined at the surfaces of MNPs could catalyze the enzyme substrate and generate electrochemical signals. The biosensor could detect the concentrations upper than 0.01 pM DNA target and upper than 500 cfu/mL of E. coli without any nucleic acid amplification steps. The detection limit could be lowered to 5 cfu/mL of E. coli after 4.0 h of incubation.     

Amperometric Glucose Biosensor on Layer by Layer Assembled Carbon Nanotube and Polypyrrole Multilayer Film

An amperometric glucose biosensor on layer by layer assembled carbon nanotube and polypyrrole multilayer film has been reported in the present investigation. Homogeneous and stable single wall carbon nanotubes (SWNTs) and polypyrrole (PPy) multilayer films were alternately assembled on platinum coated Polyvinylidene fluoride (PVDF) membrane. Since conducting polypyrrole has excellent anti‐interference ability, protection ability in favor of increasing the amount of the SWNTs on platinum coated PVDF membrane and superior transducing ability, a layer by layer approach of polypyrrole and carbon nanotubes has provided an excellent matrix for the immobilization of enzyme. The layer‐by‐layer assembled SWNTs and PPy‐modified platinum coated PVDF membrane is shown to be an excellent amperometric sensor over a wide range of concentrations of glucose. The glucose oxidase (GOx) was immobilized on layer by layer assembled film by a physical adsorption method by cross linking through Glutaraldehyde. The glucose biosensor exhibited a linear response range from 1 mM to 50 mM of glucose concentration with excellent sensitivity of 7.06 μA/mM.     

Construction of glucose biosensor based on sorption of glucose oxidase onto multilayers of polyelectrolyte/nanoparticles

A new approach to constructing an enzyme-containing film on the surface of a gold electrode for use as a biosensor is described. A basic multilayer film (BMF) of (PDDA/GNPs) _n /PDDA was first constructed on the gold electrode by electrostatic layer-by-layer self-assembly of poly(diallyldimethylammonium chloride) (PDDA) and gold nanoparticles (GNPs). Glucose oxidase (GOx) was then sorbed into this BMF by dipping the BMF-modified electrode into a GOx solution. The assembly of the BMF was monitored and tested via UV-vis spectroscopy and cyclic voltammetry (CV). The ferrocenemethanol-mediated cyclic voltammograms obtained from the gold electrode modified with the (PDDA/GNPs) _n /PDDA/GOx indicated that the assembled GOx remained electrocatalytically active for the oxidation of glucose. Analysis of the voltammetric signals showed that the surface coverage of active enzyme was a linear function of the number of PDDA/GNPs bilayers. This result confirmed the penetration of GOx into the BMF and suggests that the BMF-based enzyme film forms in a uniform manner. Electrochemical impedance measurements revealed that the biosensor had a lower electron transfer resistance (R _et) than that of a sensor prepared by layer-by-layer assembly of PDDA and GOx, due to the presence of gold nanoparticles. The sensitivity of the biosensor for the determination of glucose, which could be controlled by adjusting the number of PDDA/GNPs bilayers, was investigated.     

Transparent and flexible glucose biosensor via layer-by-layer assembly of multi-wall carbon nanotubes and glucose oxidase

This paper reports a transparent and flexible glucose biosensor of which multi-wall carbon nanotubes (MWNTs) and glucose oxidase (GOx) is layer-by-layer (LBL) self-assembled on a polymer substrate. A thin Ti and Au layers is firstly deposited on the polymer substrate through plasma immersion ion implantation (PIII) and sputtering, respectively. An organic monolayer then forms on the gold surface using thiol chemistry. Subsequently, negatively charged MWNTs and GOx are stably LBL assembled on the modified Au surface, respectively, via alternative electrostatic interaction of the positively charged polyelectrolyte with the oppositely charged MWNTs and GOx. Electrochemical studies show that the multilayer membrane exhibits remarkable electrocatalytic activity to detect glucose molecule. The biosensor displays a linear response range of 0.02–2.2 mM (a correlation coefficient of 0.998) with a low detection limit of 10 μM. This remarkable performance, combined with the large area preparation process, demonstrates this CNT-based multilayer biosensor is well suited for commercial applications.     

基于工具酶信号放大技术电化学发光法检测凝血酶

利用巯基乙胺将合成的金纳米粒子氨基化;基于纳米粒子负载羧基化的联吡啶钌和巯基DNA制得电化学发光信号探针;采用酶循环信号放大技术,获得大量含新增DNA的溶液来捕获信号探针;以金电极为载体,将巯基DNA自组装到电极表面,依次杂交互补DNA和信号探针,构建电化学发光生物传感器.在优化的条件下,此传感器对凝血酶具有良好的响应,在3.0× 10-13～6.0×10-11 mol/L范围内,凝血酶的浓度与发光强度呈良好的线性关系,检出限为1.8× 10-13 mol/L(3a).采用酶切循环放大技术制备的生物传感器具有灵敏度高,选择性和重现性良好等特点.     

Polyrotaxane‐Mediated Self‐Assembly of Gold Nanospheres into Fully Reversible Supercrystals

The use of a thiol‐functionalized nonionic surfactant to stabilize spherical gold nanoparticles in water induces the spontaneous formation of polyrotaxanes at the nanoparticle surface in the presence of the macrocycle α‐cyclodextrin. Whereas using an excess of surfactant an amorphous gold nanocomposite is obtained, under controlled drying conditions the self‐assembly between the surface supramolecules provides large and homogenous supercrystals with hexagonal close packing of nanoparticles. Once formed, the self‐assembled supercrystals can be fully redispersed in water. The reversibility of the crystallization process may offer an excellent reusable material to prepare gold nanoparticle inks and optical sensors with the potential to be recovered after use.     

Fabrication of a Stable Polyelectrolyte/Au Nanoparticles Multilayer Film

The fabrication of stable polyelectrolyte/Au nanoparticle multilayer films was achieved by the UV irradiation of layer‐by‐layer self‐assembled multilayers consisting of diazoresins and Au nanoparticles. The method promises to be a simple and efficient strategy to construct covalently attached organic/inorganic multilayer hybrids.     

Analysis of Strychnos alkaloids in traditional Chinese medicines with improved sensitivity by sweeping micellar electrokinetic chromatography

A new amperometric method was developed for rapid detection of Escherichia coli (E. coli) density using a bienzyme biosensor. The bienzyme biosensor was fabricated based on the covalent immobilization of laccase and horseradish peroxidase (HRP) at indium tin oxide (ITO) electrode by (3-aminopropyl) triethoxysilane (APTES) monolayer. The bienzyme biosensor showed a high sensitivity in determination of the polyphenolic compounds, which was microbially generated from the salicylic acid (SA) added into the culture medium during the course of E. coli metabolism. Since the amount of polyphenolic compounds depends on E. coli density, the bienzyme biosensor was applied for the rapid and high sensitive detection of E. coli density after the E. coli solution was incubated in culture medium with salicylic acid for 2.5 h at 37 °C. By chronoamperometry, the amplified response current was obtained at the bienzyme biosensor, due to the substrate recycling of the polyphenolic compounds driven by bienzyme-catalyzed oxidation and electrochemical reduction. The amplified response current at the biosensor was linear with the E. coli density ranging from 1.6 × 10³ to 1.0 × 10⁷ cells/mL. The bienzyme biosensor could detect the E. coli density with a detection limit of 9.7 × 10² cells/mL within 3 h.     

A microfluidic biosensor for rapid detection of Salmonella typhimurium based on magnetic separation,enzymatic catalysis and electrochemical impedance analysis

Rapid screening of foodborne pathogens is of great significance to ensure food safety.A microfluidic biosensor based on immunomagnetic separation,enzyme catalysis and electrochemical impedance analysis was developed for rapid and sensitive detection of S.typhimurium.First,the bacterial sample,the magnetic nanoparticles （MNPs） modified with capture antibodies,and the enzymatic probes modified with detection antibodies and glucose oxidase （GOx） were simultaneously injected into the microfluidic ch...     

Single-stage in situ synthesis of silver nanoparticles in antibacterial self-assembled overlays

In this work, a novel single-stage process for in situ synthesis of Ag nanoparticles (NPs) using the layer-by-layer (LbL) technique is presented. The Ag NPs were formed into nanotextured coatings based on sequentially adsorbed poly(allylamine hydrochloride) (PAH) and SiO₂ NPs. Such highly porous surfaces have been used in the fabrication of highly efficient ion release films for applications such as antibacterial coatings. In this approach, the amino groups of the PAH acted as reducing agent and made possible the in situ formation of the Ag NPs. This reduction reaction occurred during the LbL process as the coating was assembled, without any further step after the fabrication and stabilization of the multilayer film. Biamminesilver nitrate was used as the Ag⁺ ion source during the LbL process and it was successfully reduced to Ag NPs. All coatings were tested with gram-positive and gram-negative bacterial cultures of Escherichia coli, Staphylococcus aureus, and Lactobacillus delbrueckii showing an excellent antimicrobial behavior against these types of bacteria (more than 99.9% of killing efficiency in all cases).     

A Bioinspired Peptide in TIR Protein as Recognition Molecule on Electrochemical Biosensors for the Detection of E. coli O157:H7 in an Aqueous Matrix

Currently, the detection of pathogens such as Escherichia coli through instrumental alternatives with fast response and excellent sensitivity and selectivity are being studied. Biosensors are systems consisting of nanomaterials and biomolecules that exhibit remarkable properties such as simplicity, portable, affordable, user‑friendly, and deliverable to end‑users. For this, in this work we report for the first time, to our knowledge, the bioinformatic design of a new peptide based on TIR protein, a receptor of Intimin membrane protein which is characteristic of E. coli. This peptide (named PEPTIR‑1.0) was used as recognition element in a biosensor based on AuNPs‑modified screen‑printed electrodes for the detection of E. coli. The morphological and electrochemical characteristics of the biosensor obtained were studied. Results show that the biosensor can detect the bacteria with limits of detection and quantification of 2 and 6 CFU/mL, respectively. Moreover, the selectivity of the system is statistically significant towards the detection of the pathogen in the presence of other microorganisms such as P. aeruginosa and S. aureus. This makes this new PEPTIR‑1.0 based biosensor can be used in the rapid, sensitive, and selective detection of E. coli in aqueous matrices.     

A comparative study of the antibacterial mechanisms of silver ion and silver nanoparticles by Fourier transform infrared spectroscopy

In this study, we performed the first comparative study of the antibacterial mechanisms of silver ion (Ag⁺) and silver nanoparticles (AgNPs) on Escherichia coli (E. coli) using Fourier transform infrared (FTIR) spectroscopy. Through a thorough analysis of the FTIR spectra of E. coli after silver treatment in the spectral regions corresponding to thiol group, protein, lipopolysaccharide (LPS), and DNA, we were able to reveal a multifaceted antibacterial mechanism of silver at the molecular level for both Ag⁺ and AgNPs. Features of such mechanism include: (1) silver complexes with thiol group; (2) silver induces protein misfolding; (3) silver causes loss of LPS from bacterial membrane; (4) silver changes the overall conformation of DNA. Despite the similarities between Ag⁺ and AgNPs with respect to their antibacterial mechanisms, we further revealed that Ag⁺ and AgNPs display quite different kinetics for silver-thiol complexation and loss of LPS, with Ag⁺ displaying fast kinetics and AgNPs displaying slow kinetics. At last, we proposed a hypothesis to interpret the observed different behaviors between Ag⁺ and AgNPs when interacting with E. coli.     

Amperometric biosensor based on immobilization of acetylcholinesterase via specific binding on biocompatible boronic acid-functionalized Fe@Au magnetic nanoparticles

A new method based on specific binding between glycoprotein acetylcholinesterase and boronic acid-functionalized Fe@Au magnetic nanoparticles was presented for the development of acetylcholinesterase biosensor. Alginate–graphene composite-modified electrode was firstly prepared as the substrate. Then, biocompatible boronic acid-functionalized Fe@Au magnetic nanoparticles were anchored by the covalence between the cis-diol of alginate and the boronic acid group on Fe@Au nanoparticles. Acetylcholinesterase was subsequently immobilized via the bonding between the glycosyl of acetylcholinesterase and the boronic acid group. The immobilized enzyme retained relatively high bioactivity and the fabricated biosensor exhibited high sensitivity and fast response to acetylthiocholine chloride. Based on enzyme inhibition, carbamate pesticide was detected using Furadan as a model compound. Two linear ranges of 0.05–15 and 15–400?ppb were obtained with a detection limit of 0.01?ppb. The biosensor also showed acceptable reproducibility and relatively good storage stability. Moreover, satisfactory results were obtained in the real sample analysis.     

New PEPTIR-2.0 Peptide Designed for Use as Recognition Element in Electrochemical Biosensors with Improved Specificity towards E. coli O157:H7

The detection of pathogens through alternative methodologies based on electrochemical biosensors is being studied. These devices exhibit remarkable properties, such as simplicity, specificity, and high sensitivity in monitoring pathogens. However, it is necessary to continue conducting studies that adequately improve these characteristics, especially the recognition molecule. This work aims to design and evaluate a new peptide, named PEPTIR-2.0, as a recognition molecule in electrochemical biosensors to detect E. coli O157:H7 in water. PEPTIR-2.0 was obtained from modifications of the PEPTIR-1.0 peptide sequence, which was previously reported and exhibited excellent properties for detecting and quantifying this pathogenic microorganism. PEPTIR-1.0 is a peptide analogous to the TIR (Translocated Intimin Receptor) protein capable of interacting with the Intimin outer membrane. The basis of this study was to obtain, by using bioinformatics tools, a molecule analogous to PEPTIR-1.0 that maintains its three-dimensional structure but increases the hydrophobic interactions between it and Intimin, since these intermolecular forces are the predominant ones. The designed PEPTIR-2.0 peptide was immobilized on screen-printed electrodes modified with gold nanoparticles. The detection capacity of E. coli O157:H7 in water was evaluated using electrochemical impedance spectroscopy in the presence of other microorganisms, such as P. aeruginosa, S. aureus, and non-pathogenic E. coli. The results showed that PEPTIR-2.0 confers remarkable specificity to the biosensor towards detecting E. coli, even higher than PEPTIR-1.0.     

Sensitive detection of hydrogen peroxide in foodstuff using an organic�Cinorganic hybrid multilayer-functionalized graphene biosensing platform

We report on a new electrochemical biosensing strategy for the sensitive detection of hydrogen peroxide (H₂O₂) in foodstuff samples. It is based on a gold electrode modified with layer of graphene patterned with a multilayer made from an organic?Cinorganic hybrid nanomaterial. Initially, a layer of thionine (Th) was assembled on the surface of the graphene nanosheets, and these were then cast on the surface of the electrode for the alternate assembly of gold nanoparticles and horseradish peroxidase. The large surface-to-volume ratio and high conductivity of the nanosheets provides a benign microenvironment for the construction of the biosensor. The use of such a multilayer not only shortens the electron transfer pathway of the active center of the enzyme due to the presence of gold nanoparticles, but also enhances the electrocatalytic efficiency of the biosensor toward the reduction of H₂O₂. The electrochemical characteristics of the biosensor were studied by cyclic voltammetry and chronoamperometry. The number of layers, the operating potential, and the pH of the supporting electrolyte were optimized. Linear response is obtained for the range from 0.5???M to 1.8?mM of H₂O₂, the detection limit is 10 nM (at S/N?=?3), and 95% of the steady-state current is reached within 2?s. The method was applied to sense H₂O₂ in spiked sterilized milk and correlated excellently with the permanganate titration method.

Comparison of decanethiolate gold nanoparticles synthesized by one-phase and two-phase methods

We investigated the differences between the decanethiolate gold nanoparticles synthesized by two different routes: one-phase and two-phase methods. Their properties were compared in bulk and at the air-water interface by transmission electron microscopy (TEM), X-ray reflectivity (XR), extended X-ray absorption fine structure (EXAFS) spectroscopy, X-ray powder diffraction (XRD), thermal gravimetric analysis (TGA), time-of-flight secondary-ion mass spectrometry (TOF-SIMS), electron paramagnetic resonance (EPR), and Langmuir-Blodgett technique. The mean nanoparticles sizes obtained by EXAFS and XRD were found to be smaller than those by the TEM measurements. We explained these differences by the structural disorder and multiple twinning in the nanoparticles. The one-phase particles were found by EXAFS to be smaller and had a higher grafting density of thiol chains than the two-phase particles. We attributed these differences to the enhanced disorder of the one-phase particles. At the air-water interface, the one-phase particles did not spread, while the two-phase particles spread and formed Langmuir films. TEM and XR results revealed that the close-packed monolayer of the two-phase particles collapsed and folded into multilayer films upon further compression.