噻吩分子印迹聚合物的合成及其识别性能研究

采用分子印迹技术合成了噻吩分子印迹聚合物。研究了聚合物的吸附性能和识别性能,并考察了影响聚合物吸附性能的因素(如:功能单体、交联剂、溶剂以及模板分子与功能单体的摩尔比等)。结果表明:以噻吩为模板分子,α-甲基丙烯酸为功能单体,乙二醇二甲基丙烯酸酯为交联剂,氯仿为溶剂,反应温度60℃,在偶氮二异丁腈引发下合成的噻吩分子印迹聚合物对噻吩具有较好的吸附性能和识别特性,可为石油产品进行深度脱硫提供理论依据。     

儿茶素活性成分分子印迹聚合物的固相萃取研究

以表没食子儿茶素没食子酸酯(Epigallocatechin-gallate,EGCG)为模板分子,α-甲基丙烯酸为功能单体,乙二醇二甲基丙烯酸酯为交联剂,在光冷引发条件下合成EGCG分子印迹聚合物,利用该聚合物制成分子印迹固相萃取柱,用于固相萃取茶叶提取物茶多酚,对萃取柱中的清洗液、洗脱剂、上载量等进行了选择.结果表明,在萃取柱上载样品之后,先用V(甲醇):V(水)＝1:9溶液进行清洗,再用V(甲醇):V(乙酸)＝9:1混合液进行目标分子的洗脱,可以得到比较纯的目标物质EGCG(色谱峰相对峰面积达92.4%),萃取柱在上载样品并进行清洗、洗脱之后,EGCG的回收率达69.3%.分子印迹柱具有较好的稳定性和耐用性能,使用20次后其选择性识别能力仍未降低,但空白印迹柱却没有这样的选择性识别能力.     

对羟基苯甲酸、水杨酸分子印迹聚合物分子识别性质的 研究

以对羟基苯甲酸(4-HBA)为模板分子,4-乙烯吡啶(4-Vpy)为功能单体,制备得到了4-HBA分子印迹聚合物P(4-HBA),研究了该聚合物的分子识别机理,并与在同样条件下制备的水杨酸(SA)分子印迹聚合物P(SA)进行了分子识别能力的比较。结果表明：P(SA)比P(4-HBA)具有更好的分子识别能力。这是由于SA的酸性较4-HBA强,因此与碱性功能单体4-Vpy之间的静电作用更强,从而得到的复合物更稳定。本实验结果证明：功能单体与模板分子形成稳定的复合物是得到分子识别能力高的模板聚合物的前提条件。本文将有助于对分子印迹的过程以及分子印迹聚合物分子识别机理的进一步理解,并且对于根据模板分子的性质预测MIP的分子识别能力也将具有一定的指导意义。     

苏丹红Ⅰ分子印迹聚合物分子识别特性的波谱分析

以苏丹红Ⅰ为模板分子,α-甲基丙烯酸为功能单体,乙二醇二甲基丙烯酸酯为交联剂,通过沉淀聚合法合成了高选择性的分子印迹聚合物。通过静态吸附实验研究了聚合物的吸附性能,采用紫外光谱(UV)和核磁共振氢谱(1 H NMR)法研究了聚合物的识别机理。实验结果表明:模板分子和功能单体之间的作用为分子间氢键;红外(IR)光谱研究进一步表明,印迹聚合物通过非共价氢键作用特异性地识别模板分子。     

发光性分子印迹聚合物的合成及其对组胺的识别性能研究

以组胺为模板分子,α-甲基丙烯酸为共功能单体,锌原卟啉为荧光功能单体,乙二醇二甲基丙烯酸酯为交联剂,合成了一种新的发光性分子印迹聚合物.通过振荡吸附后检测悬浊液荧光和柱吸附后检测流出液中组胺紫外光谱的变化,对印迹和非印迹聚合物与组胺的结合特性进行了对比.两种方法的结果一致,表明印迹聚合物对模板分子的识别选择性优于非印迹聚合物.     

对硫磷分子印迹聚合物在固相萃取中的应用

采用分子印迹技术,以对硫磷为模板分子,二乙烯三胺为固化剂,环氧树脂为单体,聚乙二醇为致孔剂,制备了具有良好识别性能的分子印迹聚合物.系统考察了对硫磷与其结构类似物在该聚合物上的选择性分离富集特性.用聚合物固相萃取了小白菜中的对硫磷.结果表明,聚合物对模板分子产生了印迹效应,对对硫磷有明显的选择性.本文采用C18色谱柱,...     

内分泌干扰物雌酮分子印迹新型吸附功能材料的制备及其选择性能研究

采用分子印迹本体聚合法,制备了对内分泌干扰物雌酮具有高选择识别能力的分子印迹聚合物。吸附动力学和选择性实验结果表明,与非印迹聚合物相比,印迹聚合物具有较高的吸附容量和吸附速率,对模板分子具有较高的选择性。聚合反应条件对印迹聚合物的吸附和识别性能有重要影响,以丙烯酰胺为功能单体,模板分子、功能单体和交联剂摩尔比为1:3:6,制备的印迹聚合物具有较高的选择和吸附性能。     

内分泌干扰物雌酮分子印迹新型吸附功能材料的制备及其选择性能研究料

采用分子印迹本体聚合法,制备了对内分泌干扰物雌酮具有高选择识别能力的分子印迹聚合物。吸附动力学和选择性实验结果表明,与非印迹聚合物相比,印迹聚合物具有较高的吸附容量和吸附速率,对模板分子具有较高的选择性。聚合反应条件对印迹聚合物的吸附和识别性能有重要影响,以丙烯酰胺为功能单体,模板分子、功能单体和交联剂摩尔比为1：3：6,制备的印迹聚合物具有较高的选择和吸附性能。     

克百威分子印迹聚合物的合成及其性能评价

以克百威为模板分子,甲基丙烯酸(MAA)为功能单体,二甲基丙烯酸乙二醇酯(EGDMA)为交联剂,采用沉淀聚合的方法制备了克百威分子印迹聚合物。通过红外光谱分析得到模板和功能单体的最佳配比为n(carbofuran)∶n(MAA)=1∶6。印迹聚合物的红外光谱测定结果表明,聚合物中存在与模板分子相互作用的特征基团;从印迹聚合物的扫描电镜图观察到分子印迹聚合物(MIP)与空白聚合物(NIP)的表面形态不同,可推论MIP存在与模板分子相互识别的结合位点。通过静态平衡结合法研究了模板分子聚合物的吸附能力、结合动力学和选择特性。结果表明,与非印迹聚合物相比,印迹聚合物对克百威具有较强的吸附特性和很好的专一选择性,3h后基本达到最大吸附量。采用固相萃取柱预处理样品,用高效液相色谱法测定自来水中10、50、100mg/L克百威的加标回收率为94%～117%,相对标准偏差(n=3)为2.5%～4.7%。     

选择性富集分离虎杖中白藜芦醇苷的分子印迹聚合物的制备及分子识别性能研究

以白藜芦醇苷(POL)为模板分子,分别以丙烯酰胺(AM)、4-乙烯基吡啶(4-VP)、甲基丙烯酸羟乙酯(HEMA)、甲基丙烯酸(MAA)为功能单体,二甲基丙烯酸乙二醇酯(EGDMA)为交联剂,偶氮二异丁腈(AIBN)为引发剂,采用本体聚合法制备白藜芦醇苷分子印迹聚合物。采用静态平衡结合实验研究了印迹聚合物对模板分子及不同底物的识别性能。结果表明,以丙烯酰胺为功能单体的印迹聚合物(MIP1)对模板分子的识别性能最好,其次是以4-VP为功能单体的聚合物(MIP2),以HEMA为功能单体的聚合物(MIP3)以及以MAA为功能单体的聚合物(MIP4)的分子识别性能较差。表明功能单体与模板分子之间相互作用的强弱对MIP的识别能力有较大的影响。静态平衡结合法以及Scatchard分析法表明,MIP1对模板分子呈现较好的结合能力和选择性,该印迹聚合物中形成了2类不同的结合位点,离解常数分别为7.43×10-5、3.70×10-3mol/L。将MIP1用于虎杖提取物中POL的固相萃取分离,效果良好。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Copper catalyzed/mediated synthetic methodology for ebselen and related isoselenazolones

Scope of the copper catalyzed/mediated selenium-nitrogen coupling reaction has been studied for the synthesis of isoselenazolones. It is noticed that the 2-chloro, 2-bromo-, and 2-iodo-aryl amides substrates can be exploited in the selenium-nitrogen coupling reaction by employing 25-100 mol % of CuI/1,10-phenanthroline (L) and potassium carbonate as a base in DMF. Furthermore, electron rich 2-chloro-arylamides also underwent selenium-nitrogen coupling reaction to give biologically important selenium-nitrogen heterocycles. Also, copper-catalyzed selenium-nitrogen coupling reaction has been meticulously applied for the synthesis of diaryl diselenides having methoxy, amine, and amide functionality from respective aryl iodides in the presence of stoichiometric amount of succinimide as an external Se-N coupling partner.     

Knoevenagel condensation catalyzed by novel Nmm-based ionic liquids in water

A series of novel N-methyl morpholine (Nmm) based ionic liquids with 1,2-propanediol group were synthesized and used as catalysts for Knoevenagel condensation at room temperature in water. Under the effect of the catalyst, various aldehydes or aliphatic ketones could react with a wide range of activated methylene compounds well, including malononitrile, alkyl cyanoacetate, cyanoacetamide, β-diketone, barbituric acid, 2-arylacetonitrile and thiazolidinedione. Furthermore, most of the products could be separated just by filtrating and washing with water. Additionally, the catalyst is recyclable and applicable for the large-scale synthesis.     

Construction of polyheterocyclic spirotetrahydrothiophene derivatives via sulfa-Michael/aldol cascade reaction

A series of polyheterocyclic spirotetrahydrothiophene derivatives were obtained in moderate to excellent yields via a catalyst-free sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 under mild conditions. We also present the first asymmetric sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 with moderate to good enantioselectivities catalyzed by readily available chiral phase-transfer catalysts (PTCs).     

Suzuki-Miyaura reactions of the soluble guanylate cyclase inhibitor NS2028: a non-product specific route to C-8 substituted analogues

Both soluble guanylate cyclase (sGC) inhibitors ODQ 1 and NS2028 2 are synthesized via improved protocols. In the former case treating 3,4-dihydroquinoxalin-2(1H)-one oxime 8, which can be prepared in two steps from 1,2-benzenediamine, with 1,1′-carbonyldiimidazole (CDI) gives the dihydro-ODQ 10 that in the presence of KMnO₄ oxidises to give ODQ 1 in an overall yield of 46% starting from 1,2-benzenediamine. In the latter case, the synthesis affords NS2028 2 from 2-amino-4-bromophenol 3 in three steps with an overall yield of 85% and avoids the need for chromatography. Furthermore, Suzuki-Miyaura reaction conditions are described that enable the preparation of 8-aryl and 8-heteroaryl derivatives of NS2028 directly from NS2028 2. Finally, demethylation of the 8-(methoxyphenyl) substituted analogues afforded the 8-(hydroxyphenyl) derivatives 40-42. All new products are fully characterised.