Effect of annealing on the properties of chemical bath deposited nanorods of CdSe thin films

Cadmium selenide (CdSe) thin films have been deposited by chemical bath deposition (CBD) on a glass substrate and they are annealed at 450 °C for 1 h. Scanning electron microscopic (SEM) image of as‐deposited CdSe shows the spherical shaped grains distributed over entire glass substrate. When it is annealed at 450 °C, clusters of nano‐rods with star shaped grains are formed. The X‐ray diffraction (XRD) study of the as‐deposited films exhibits a polycrystalline nature and it undergoes a structural phase transition from the metastable cubic to the stable hexagonal phase when annealed at 450 °C. Optical band gap of as‐deposited films (2.0 eV) has a blue shift with respect to the bulk value (1.7 eV) due to quantum confinement. The band gap energies of the films are decreased from 2.0 eV to 1.9 eV due to annealing at the temperature of 450 °C. The electrical resistivity, Hall mobility and carrier concentration of as‐deposited and annealed films are determined.     

Optical properties of ZnO nano fiber thin films grown by spray pyrolysis of zinc acetate precursor

Good homogeneous and stoichiometric ZnO nanofiber thin films have been deposited onto cleaned glass substrate by a simple spray pyrolysis technique under atmospheric pressure using zinc acetate precursor at temperature 200 °C. Films of various thicknesses have been obtained by varying the deposition time, while all other deposition parameters such as spray rate, carrier gas pressure and distance between spray nozzle to substrate were kept constant. Surface morphology and optical properties of the as deposited thin films have been studied by Scanning Electron Microscopy (SEM) attached with an EDX and UV visible spectroscopy. From EDX data, atomic weight% of Zinc and Oxygen were found to be 49.22% and 49.62% respectively. The SEM micrograph of the film shows uniform deposition and scattered nano fiber around the nucleation centers. The optical band gap of the ZnO thin films was found to be in the range 3.3 to 3.4 eV and the band gap decreases with thickness of the film. Optical constants such as refractive index, extinction coefficient, real and imaginary parts of dielelectric constants were evaluated from reflectance and absorbance spectra. (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Substrate effect on microstructure and optical performance of sputter‐deposited TiO2 thin films

This study deals with the role of the different substrates on the microstructural, optical and electronical properties of TiO₂ thin films produced by conventional direct current (DC) magnetron sputtering in a mixture of pure argon and oxygen using a Ti metal target with the aid of X–ray diffractometer (XRD), ultra violet spectrometer (UV–vis) and atomic force microscopy (AFM) measurements. Transparent TiO₂ thin films are deposited on Soda lime glass, MgO(100), quartz and sitall substrates. Phase purity, surface morphology, optical and photocatalytic properties of the films are compared with each other. It is found that the amplitude of interference oscillation of the films is in a range of 77‐89%. The transmittance of the film deposited on Soda lime glass is the smallest while the film produced on MgO(100) substrate obtains the maximum transmittance value. The refractive index and optical band gap of the TiO₂ thin films are also inferred from the transmittance spectra. The results show that the film deposited on Soda lime glass has the better optical property while the film produced on MgO(100) substrate exhibits much better photoactivity than the other films because of the large optical energy band gap. As for the XRD results, the film prepared on MgO(100) substrate contains the anatase phase only; on the other hand, the other films contain both anatase and rutile phases. Furthermore, AFM images show that the regular structures are observed on the surface of all the films studied. (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Influence of substrate temperature on microcrystalline structure and optical properties of ZnTe thin films

ZnTe thin films were deposited onto well‐cleaned glass substrates kept at different temperatures (Ts = 303, 373 and 423 K), by vacuum evaporation method under the pressure of 10^–5 Torr. The thickness of the film was measured by quartz crystal monitor and verified by the multiple beam interferometer method. The structural characterization was made using X‐ray diffractometer with filtered CuKα radiation. The grain sizes of the microcrystallines in films increases with increase in substrate temperature. The strain (ε), grain size (D) and dislocation density (δ) was calculated and results are discussed based on substrate temperature. Optical behaviour of the film was analyzed from transmittance spectra in the visible region (400–800 nm). The optical transition in ZnTe films is direct and allowed type. The optical band gap energy shows an inverse dependence on substrate temperature and thickness. (© 2006 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Structural investigation and electronic band transitions of nanostructured TiO2 thin films

Titanium dioxide (TiO₂) thin film was deposited on n‐Si (100) substrate by reactive DC magnetron sputtering system at 250 °C temperature. The deposited film was thermally treated for 3 h in the range of 400‐1000 °C by conventional thermal annealing (CTA) in air atmosphere. The effects of the annealing temperature on the structural and morphological properties of the films were investigated by X‐ray diffraction (XRD) and atomic force microscopy (AFM), respectively. XRD measurements show that the rutile phase is the dominant crystalline phase for the film annealed at 800 °C. According to AFM results, the increased grain sizes indicate that the annealing improves the crystalline quality of the TiO₂ film. In addition, the formation of the interfacial SiO₂ layer between TiO₂ film and Si substrate was evaluated by the transmittance spectra obtained with FTIR spectrometer. The electronic band transitions of as‐deposited and annealed films were also studied by using photoluminescence (PL) spectroscopy at room temperature. The results show that the dislocation density and microstrain in the film were decreased by increasing annealing temperature for both anatase and rutile phases. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Optical and structural characterisation of zinc oxide thin films prepared by sol‐gel process

Zinc oxide thin films have been prepared on different substrates by the sol‐gel method using 2‐methoxyethanol solution of zinc acetate dihydrate stabilized by monoethanolamine. The photoluminescence spectra of the films show the band‐edge and sub‐band transitions. The intensity of the band edge emission peak increases, while the intensity of the deep level emission peak decreases in the films coated on sapphire substrate. Transmittance spectra show that the films are transparent beyond 400 nm. The structural property of the films has been evaluated using X‐ray diffraction. The X‐ray peak intensity of the film (002) grown on sapphire substrate is higher than the films grown on glass and quartz substrates. The AFM images show improvement in the surface of the annealed films as compared to the as‐grown ZnO films coated on sapphire substrates. (© 2006 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Effect of substrate temperature on the properties of reactively sputtered TiN/NbN multilayers

TiN/NbN multilayer coatings were deposited with various substrate temperatures by DC reactive magnetron sputtering method onto Si (111) and glass substrates. The effect of substrate temperature on the structural and optical properties of TiN/NbN multilayers was investigated by X‐ray diffraction, X‐ray photoelectron spectroscopy, Field emission scanning electron microscopy and Photoluminescence measurements. The composition was analyzed by X‐ray photoelectron spectroscopy. X‐ray diffraction results showed that the layers crystallized in cubic structure for TiN and hexagonal structure for NbN. It was found that grain size increased with increase in substrate temperature. The surface morphology of the TiN/NbN thin films showed a dense and smooth surface with substrate temperature upto 200 °C but after 300 °C, the grains became larger and coarse surface was observed. The TiN/NbN multilayer coatings exhibited the characteristic peaks centered at 180, 210 and 560 cm^‐1. Red band emission peaks were observed in the wavelength range of 700‐710 nm. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Substrate temperature effect on the optical properties of amorphous Sb2S3 thin films

Sb₂S₃ amorphous thin films were prepared by thermal evaporation of corresponding powder on thoroughly cleaned glass substrates held at temperature in the range 300‐473 K. X‐ray diffraction and atomic force microscopy have been used to order to identify the structure and morphology of surface thin films. The optical constants of the deposition films were obtained from the analysis of the experimental recorded transmission data over the wavelength range 400‐1400 nm. An analysis of the absorption coefficient values revealed an optical indirect transition with the estimation of the corresponding band gap values. It was found that the optical band gap energy decrease with substrate temperature from 1.67 eV at 300 K to 1.48 eV at 473K. (© 2006 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Structural,compositional and optical properties of gallium selenide thin films doped with cadmium

Polycrystalline cadmium doped gallium selenide thin films were obtained by the thermal co‐evaporation of GaSe crystals and Cd grains onto glass substrates. The structural, compositional and optical properties of these films have been investigated by means of X‐ray diffraction, energy dispersive X‐ray analysis and UV‐visible spectroscopy techniques, respectively. Particularly, the elemental analysis, the crystalline nature, the energy band gap, the refractive index, the dispersion energy and static dielectric constant have been identified. The absorption coefficient spectral analysis in the sharp absorption region revealed a direct forbidden energy band gap of 1.22 eV. The cadmium doping has caused a significant decrease in the values of the energy band gap and in all the dispersive optical parameters, as well. (© 2008 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Effect of annealing on the structural,electrical and optical properties of nanostructured TiO2 thin films

Nanostructured titanium dioxide thin films were prepared using reactive pulsed laser ablation technique. Effects of annealing on the structural, morphological, electrical and optical properties are discussed. The structural, electrical and optical properties of TiO₂ films are found to be sensitive to annealing temperature and are described with GIXRD, SEM, AFM, UV‐Visible spectroscopy and electrical studies. X‐ray diffraction studies showed that the as‐deposited films were amorphous and at first changed to anatase and then to rutile phase with increase of annealing temperature. Optical constants of these films were derived from the transmission spectra and the refractive index dispersion of the films, subjected to annealing at different temperatures, is discussed in terms of the single oscillator‐Wemple and Didomenico model. (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Temperature dependence of growth orientation and surface morphology of Li‐doped ZnO thin films on SiO2/Si substrates

ZnO thin films doped with Li (ZnO:Li) were deposited onto SiO₂/Si (100) substrates by direct‐current sputtering technique in the temperature range from room temperature to 500 °C. The crystalline structure, surface morphology and composition, and optical reflectivity of the deposited films were studied by X‐ray diffraction (XRD), Scanning Electron Microscopy (SEM), X‐ray Photoelectron Spectroscopy (XPS) and optical reflection measurements. Rough surface p‐type ZnO thin film deposition was confirmed. The results indicated that the ZnO:Li films growed at low temperatures show c‐axis orientation, while a‐axis growth direction is preferable at high temperatures. Moreover, the optical reflectivity from the surface of the films matched very well with the obtained results. (© 2008 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Effect of substrate temperature on the properties of vacuum evaporated indium selenide thin films

Thin films of InSe were obtained by thermal evaporation techniques on glass substrates maintained at various temperatures (T_sb = 30°, 400°C). X‐ray diffraction analysis showed the occurrence of amorphous to polycrystalline transformation in the films deposited at higher substrate temperature (400°C). The polycrystalline films were found to have a hexagonal lattice. Compositions of these films have been characterized by EDAX and the surface analysis by scanning electron microscopy. Optical properties of the films, investigated by using spectrophotometer transmittance spectra in the wavelength range (300 – 1100 nm), were explained in terms of substrate temperatures. Films formed at room temperature showed an optical band gap (E_g^opt) 1.56 eV; where as the films formed at 400°C were found to have a E_g^opt of 1.92 eV. The increase in the value of E_g^opt with T_sb treatment is interpreted in terms of the density of states model as proposed by Mott and Davis. The analysis of current ‐Voltage characteristics, based on space charge limited currents (SCLC) measurements, confirms the exponential decrease of density of states from the conduction band edge towards the Fermi level for both the amorphous and polycrystalline films. (© 2005 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Spray pyrolysis deposition and characterization of highly (100) oriented magnesium oxide thin films

Transparent dielectric thin films of MgO has been deposited on quartz substrates at different temperatures between 400 and 600°C by a pneumatic spray pyrolysis technique using Mg(CH₃COO)₂·4H₂O as a single molecular precursor. The thermal behavior of the precursor magnesium acetate is described in the results of thermogravimetry analysis (TGA) and differential thermal analysis (DTA). The prepared films are reproducible, adherent to the substrate, pinhole free and uniform. Amongst the different spray process parameters, the substrate temperature effect has been optimized for obtaining single crystalline and transparent MgO thin films. The films crystallize in a cubic structure and X‐ray diffraction measurements have shown that the polycrystalline MgO films prepared at 500°C with (100) and (110) orientations are changed to (100) preferred orientation at 600°C. The MgO phase formation was also confirmed with the recorded Fourier Transform Infrared (FTIR) results. The films deposited at 600°C exhibited highest optical transmittivity (>80%) and the direct band gap energy was found to vary from 4.50 to 5.25 eV with a rise in substrate temperature from 500 to 600°C. The measured sheet resistance and the resistivity of the film prepared at 600°C were respectively 10¹³Ω/□ and 2.06x10⁷Ω cm. The surface morphology of the prepared MgO thin films was examined by atomic force microscopy. (© 2007 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Influence of thermoannealing on crystallinity and optical properties of Sb2S3 thin films

Sb₂S₃ thin films are obtained by evaporating of Sb₂S₃ powder onto glass substrates maintained at room temperature under pressure of 2×10^‐5 torr. The composition of the thin films was determined by energy dispersive analysis of X‐ray (EDAX). The effect of thermal annealing in vacuum on the structural properties was studied using X‐ray diffraction (XRD) technique and scanning electron microscopy (SEM). The as‐deposition films were amorphous, while the annealed films have an orthorhombic polycrystalline structure. The optical constants of as‐deposited and annealed Sb₂S₃ thin films were obtained from the analysis of the experimental recorded transmission spectral data over the wavelength range 400‐1400 nm. The transmittance analysis allowed the determination of refractive index as function of wavelength. It was found that the refractive dispersion data obeyed the single oscillator model, from which the dispersion parameters (oscillator energy, E₀, dispersion energy, E_d) were determined. The static refractive index n(0), static dielectric constant, ε_∞, and optical band gap energy, E_g, were also calculated using the values of dispersion parameters. (© 2007 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Electrical and Photoelectrical Properties of Vacuum Deposited SnSe Thin Films

Polycrystalline thin films of tin selenide have been prepared by vacuum deposition at a substrate temperature of 150°C and reported. X‐ray diffraction, optical transmission, electrical conductivity and photoconductivity studies have been carried out on these films. Annealing the films at 300°C for 2 hours improves the crystallinity and a preferred orientation along the (111) plane develops. The optical transmission measurement reveals that the SnSe thin films have a direct allowed band gap of 1.26 eV. Electrical conductivity study shows that the conductivity increases with increasing temperature. The observed electrical conductivity at low temperature is explained based on hopping conduction mechanism. The photoconductivity measurement indicates the presence of continuously distributed deep localised gap states in this material.     

Effect of substrate temperature on polycrystalline Cd0.9Zn0.1Te thin films studied by Raman scattering spectroscopy

Cd_0.9Zn_0.1Te thin films were prepared by vacuum evaporation onto well‐cleaned glass substrates maintained at 300, 373 and 473 K. X‐ray diffraction studies revealed that the films have zinc blende structure with preferential (111) orientation. Raman peak of the room temperature deposited film appeared at 140.30 cm^‐1 and 159.65 cm^‐1 were for the transverse optic (TO) and longitudinal optic (LO) phonons respectively. The XRD patterns of the higher substrate temperature deposited films exhibited an improvement in the crystallinity of the films. The Raman peak intensity increases and the FWHM decreases for the films deposited at higher substrate temperature. (© 2004 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Correlation between growth orientation and growth temperature for bismuth tri‐iodide films

This paper reports the growth of bismuth tri‐iodide thick films intended for direct and digital X‐ray imaging. Films were grown by the vertical physical vapor deposition method, onto glass substrates 2″x 2″ in size, with gold previously deposited as rear electrode. The film thickness was up to 33 μm (±5 %). Optical microscopy and SEM were performed on the films and grain size resulted to be up to 40 μm. A strong correlation was found between the microcrystals growth orientation and the growth temperature. At low temperatures, microcrystals grow with their c axis parallel to the substrate, whereas at higher temperatures, they grow with their c axis perpendicular to the substrate. The higher the growth temperature, the lower the dark current of the film, and the higher the resistivity, which was from 10¹³ to 10¹⁵ Ωcm. A sensitivity to X‐rays of 6.9 nC/R.cm² was measured irradiating the films with X‐rays from a mamographer. Film properties were correlated with the growth temperature, with previous results for bismuth tri‐iodide films and monocrystals and with data for films of alternative materials such as lead and mercuric iodide. (© 2004 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Influence of selenization temperature on synthesis,morphology, and properties of nanostructured CoSe2 films

Nanostructured cobalt selenide (CoSe₂) thin films were deposited on a glass substrate using the selenization of Co films at different selenization temperatures (300 °C, 400 °C, and 500 °C) in a pure Se vapor for two hours. The morphology and structure of the as‐deposited films shows that the film morphology and crystallinity are affected by the selenization temperature. Increasing the selenization temperature from 300 °C to 400 °C and 500 °C results in a change in the surface and cross sectional morphology. At 300 °C, the Co films have an almost amorphous structure, while at temperatures of 400 and 500 °C, the Co films have a crystalline nanostructure with bilayered morphology. Optical analyses of the CoSe₂ films at 500 °C show a large absorption (α > 1.0 × 10⁵ cm⁻¹) and a direct band gap (∼1.0 eV).     

Influence of density of states on optical properties of GaSe thin film

A systematic investigation on the effect of substrate temperature on the structure, optical absorption and density of states of vacuum evaporated gallium monoselenide (GaSe) thin films is reported. The X‐ray diffraction analysis shows an occurrence of amorphous to polycrystalline transformation in the films deposited at higher‐temperature substrates (573K). The compositional analysis is made with Auger Electron Spectroscopy (AES). The thickness of the film (175nm) is measured by a multiple beam interferometery. Optical characteristics of the GaSe sample have been analyzed using spectrophotometer in the photon energy range of 1.0 ‐ 4 eV. The absorption mechanism has been recognized and the allowed indirect as well as forbidden direct transitions have been found. As‐deposited films show two indirect and allowed transitions due to spin‐orbit splitting of the valence band, as reported here for the first time. Low field conduction have enabled us to determine the density of states in amorphous and poly‐GaSe films. The amorphous and polycrystalline GaSe thin films have localized states density values of N (E_F) = 1.686 × 10¹⁷ cm^‐3 eV^‐1 and 1.257 × 10¹⁵ cm^‐3 eV^‐1 respectively. The experimental results are interpreted in terms of variations in the density of localized states due to progressive decrease of the unsaturated bonds during deposition. (© 2004 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Sputter power and sputter pressure influenced structural and optical behaviour of RF sputtered nanocrystalline ZnO films

Zinc oxide thin films were deposited on p‐type (100) silicon and Corning glass substrate by using RF magnetron sputtering at different sputter powers range 100–200 W and sputter pressures range 2–8 Pa. The deposited films were characterized by X‐ray diffraction, atomic force microscopy, scanning electron microscopy, Fourier transform infrared spectroscope and UV‐Vis‐NIR spectrophotometer. The films formed at sputter power of 100 W consists of weak (100) reflection and then sputter power increased to 150 W additional (110) reflection was present with enhancement in the intensity of (100) peak. Further increase of sputtering power to 200 W the intensity of (100) phase decreased with the presence of additional peaks of (002) and (101) of ZnO. The FTIR analysis confirms the Zn‐O absorption band was located at 414 cm^‐1. The optical band gap of zinc oxide films decreased from 3.28 to 3.07 eV with increase of sputter power from 100 to 200 W. The maximum crystallite size of 21 nm, the root mean square roughness of 7.2 nm was found at films formed at working pressure of 5 Pa. The optical transmittance of the films increased from 88 to 96% and then decreased to 84% with increase of sputter pressure from 2 to 8 Pa.