Influence of precursor concentration on structural,morphological and electrical properties of spray deposited ZnO thin films

Nanostructured ZnO thin films were coated on glass substrate by spray pyrolysis using Zinc acetate dihydrate as precursor. Effect of precursor concentration on structural, morphological, optical and electrical properties of the films was investigated. The crystal structure and orientation of the ZnO thin films prepared with four different precursor solution concentrations were studied and it was observed that, the prepared films are polycrystalline in nature with hexagonal wurzite structure. The peaks are indexed to (100), (002), (101), (102) and (110) planes. Grain size and texture coefficient (TC) were calculated and the grain size found to increase with an increase in precursor concentration. Presence of Zn and O elements was confirmed with EDAX spectra. Optical absorption measurements were carried out in the wavelength region of 380 to 800 nm and the band gap decreases as precursor concentration increases. The current‐voltage characteristics were observed at room temperature and in dark. It was found that for the films deposited at four different precursor concentrations, the conductivity improves as precursor concentration increases. As trimethyl amine TMA is a good marker for food quality discrimination, sensing behavior of the films at an optimized operating temperature of 373 K, towards various concentrations of (TMA) was observed and reported. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Influence of the substrate temperature on the structural,optical, and electrical properties of tin selenide thin films deposited by thermal evaporation method

Thin films of tin selenide (SnSe) were deposited on sodalime glass substrates, which were held at different temperatures in the range of 350‐550 K, from the pulverized compound material using thermal evaporation method. The effect of substrate temperature (T_s) on the structural, morphological, optical, and electrical properties of the films were investigated using x‐ray diffraction analysis (XRD), scanning electron microscopy (SEM), transmission measurements, and Hall‐effect characterization techniques. The temperature dependence of the resistance of the films was also studied in the temperature range of 80‐330 K. The XRD spectra and the SEM image analyses suggest that the polycrystalline thin films having uniform distribution of grains along the (111) diffraction plane was obtained at all T_s. With the increase of T_s the intensity of the diffraction peaks increased and well‐resolved peaks at 550 K, substrate temperature, were obtained. The analysis of the data of the optical transmission spectra suggests that the films had energy band gap in the range of 1.38‐1.18 eV. Hall‐effect measurements revealed the resistivity of films in the range 112‐20 Ω cm for films deposited at different T_s. The activation energy for films deposited at different T_s was in the range of 0.14 eV‐0.28 eV as derived from the analysis of the data of low‐temperature resistivity measurements. (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Influence of oxygen/argon ratio on structural,electrical and optical properties of Ag-doped ZnO thin films

Ag-doped ZnO (ZnO:Ag) thin films were deposited on quartz substrates by radio frequency magnetron sputtering technique. The influence of oxygen/argon ratio on structural, electrical and optical properties of ZnO:Ag films has been investigated. ZnO:Ag films gradually transform from n-type into p-type conductivity with increasing oxygen/argon ratio. X-ray photoelectron spectroscopy measurement indicates that Ag substitutes Zn site (Ag_Zn) in the ZnO:Ag films, acting as acceptor, and being responsible for the formation of p-type conductivity. The presence of p-type ZnO:Ag under O-rich condition is attributed to the depression of the donor defects and low formation energy of Ag_Zn acceptor. The I–V curve of the p-ZnO:Ag/n-ZnO homojunction shows a rectification characteristic with a turn-on voltage of ∼7 V.     

Thickness and substrate orientation dependence of ferromagnetism in Mn doped ZnO thin films

The effect of film thickness and substrate orientation on ferromagnetism in Mn doped ZnO thin films have been studied. The Mn doped ZnO films of different thickness (15, 35 and 105 nm) have been grown on both Si (100) and Si (111) substrates. The structural, electrical, optical, elemental and magnetic properties of the films have been investigated by X‐ray diffraction (XRD), Hall Effect measurements, photoluminescence (PL), energy dispersive spectroscopy (EDS) and vibrating sample magnetometer (VSM), respectively. It is found that all the properties are strongly influenced by the film thickness and substrate orientation. The XRD analysis confirmed that the formation of high quality monophasic hexagonal wurtzite structure for all the grown films. The room temperature VSM measurements showed that the films of lower thickness have better ferromagnetism than that of the thicker films grown on both the substrates. Among the lower thickness films, the film grown on Si (111) substrate has higher saturation magnetization (291×10^‐5 emu cm^‐3) due to high density of the defects. The observed ferromagnetism has been well justified by XRD, Hall measurements and PL. The presence of Mn atoms in the film has been confirmed by EDS. (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Influence of substrate temperature and oxygen/argon flow ratio on the electrical and optical properties of Ga‐doped ZnO thin films prepared by rf magnetron sputtering

Effects of substrate temperature and atmosphere on the electrical and optical properties of Ga‐doped ZnO thin films deposited by rf magnetron sputtering were investigated. The electrical resistivity of Ga‐doped ZnO (GZO) films decreases as the substrate temperature increases from room temperature to 300°C. A minimum resistivity of 3.3 × 10^–4 Ω cm is obtained at 300°C and then the resistivity increases with a further increase in the substrate temperature to 400°C. This change in resistivity with the substrate temperature is related to the crystallinity of the GZO film. The resistivity nearly does not change with the O₂/Ar flow ratio, R for R < 0.25 but increases rapidly with R for R > 0.25. This change in resistivity with R is also related to crystallinity. The crystallinity is enhanced as R increases, but if the oxygen partial pressure is higher than a certain level (R = 0.25 ± 0.10) gallium oxides precipitate at grain boundaries, which decrease both carrier concentration and mobility. Optical transmittance increases as R increases for R < 0.75. This change in transmittance with R is related to changes in oxygen vacancy concentration and surface roughness with R. (© 2006 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Influence of gamma radiation on the absorption spectra and optical energy gap of Li‐ doped ZnO thin films

We have studied the effect of subsequent gamma (γ) irradiation on the absorption spectra and the optical energy gap of ZnO thin films doped with Li (ZnO:Li). The optical transmission (T) and optical reflection (R) in the wavelength range 190∼800 nm of films deposited at 300 °C on sapphire, MgO or quartz substrates were measured. The dependence of the absorption coefficient α on photon energy hν was determined as a function of γ‐doses. The films show direct allowed interband transition that influenced by the gamma doses. Both the optical energy gap E^opt_g and the absorption coefficient (α) were found to be γ‐dose dependent. The results can be discussed on the basis of γ‐irradiation‐induced defects in the film and on the film structure. The absorption coefficient exhibits exponential dependence on photon energy obeying Urbach's rule in the absorption edge. (© 2004 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Influence of substrate temperature on the structure of ZnO:Al thin films

ZnO: Al films were prepared using low cost spray pyrolysis technique. The dependence of the physical properties on the substrate temperature was studied. The best films obtained at 500°C substrate temperature with preferred [002] orientation. The sheet resistance decreases with increased substrate temperature, and values as low as R_sh = 207 Ω/cm² are reached for substrate temperature of 500°C. The optical transmittance of films increased by increasing the substrate temperature and received to 75% at 500°C. (© 2007 WILEY ‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Eu3+,Tb3+掺杂对RF磁控溅射ZnO薄膜结构的影响

利用RF磁控溅射技术,不同条件下在不同衬底上制备了纯ZnO及Eu3+,Tb3+共掺ZnO薄膜.研究了薄膜的衬底、沉积时间和衬底温度对ZnO薄膜结构及形貌的影响.使用X射线衍射仪(XRD)对样品的结构进行了表征,结果表明:玻璃和石英衬底上的薄膜分别在300℃、镀膜0.5h和常温下、镀膜lh时薄膜具有良好的c轴择优取向,单品质量较好;而硅衬底上的薄膜在300℃、镀膜lh时具有良好的(103)轴择优取向,单品质量略有降低.     

Investigation of DTS effect on r.f. magnetron sputtered ZnO thin films

The aim of this study depends on understanding the effect of target‐to‐substrate distance (D_TS) on ZnO thin films deposited by r.f. magnetron sputtering on to glass substrates at room temperature conditions. The D_TS was changed from 35 mm to 65 mm with steps of 5 mm at 165 W and 0.2 Pa. The deposition rate of the films were ranged from 76 Ǻ / min to 146 Ǻ / min, while 10^‐3 Ω.cm was obtained as the resistivity value with the help of four point probe technique. The structural investigations were carried out by using both the x‐ray diffraction (XRD) and high resolution transmission electron microscopy. According to XRD observations, the films were (002) oriented. Surface behaviour of the ZnO films was examined with atomic force microscopy and scanning electron microscopy. The root mean square (RMS) values were varied from 4.6 nm to 22.8 nm. Also, optical properties were obtained from UV–visible spectrophotometer and the transmittances as around 80 %. At 45 mm D_TS value, the minimum resistivity measured as 9 × 10^{− 4} Ω.cm with 76 Ǻ / min deposition rate. The RMS was obtained as 4.9 nm and transmission was measured as 85.30 %, while band gap was 3.45 eV.     

Effect of annealing on the structural,electrical and optical properties of nanostructured TiO2 thin films

Nanostructured titanium dioxide thin films were prepared using reactive pulsed laser ablation technique. Effects of annealing on the structural, morphological, electrical and optical properties are discussed. The structural, electrical and optical properties of TiO₂ films are found to be sensitive to annealing temperature and are described with GIXRD, SEM, AFM, UV‐Visible spectroscopy and electrical studies. X‐ray diffraction studies showed that the as‐deposited films were amorphous and at first changed to anatase and then to rutile phase with increase of annealing temperature. Optical constants of these films were derived from the transmission spectra and the refractive index dispersion of the films, subjected to annealing at different temperatures, is discussed in terms of the single oscillator‐Wemple and Didomenico model. (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Photocatalytic properties of TiO2/ZnO thin film

ABSTRACT

TiO₂, ZnO and ZnO/TiO₂ thin films have been prepared by radio frequency magnetron sputtering method under different temperatures. Their photo catalytic activities have been investigated. The structural of the thin films were characterized by X-ray diffraction and Raman spectroscopy. The photo catalytic activities of TiO₂ and ZnO/TiO₂ samples were evaluated by the photo decomposition of methylene blue. We note that the structural proprieties of the thin films showed a perfect crystallization along the (002) for ZnO, Rutile (110) for TiO₂ and Anatase (101) for TiO₂. The experimental results show that the bilayer ZnO/TiO₂ were the most efficient photo catalysts compared to the layer of TiO₂. This increased catalytic effect can attributed to the interface between the ZnO layer and the TiO₂ one, which modify significantly the chemical potential of the bilayer.     

Growth of nitrogen-doped p-type ZnO films by spray pyrolysis and their electrical and optical properties

Nitrogen-doped ZnO films were deposited on silicon (1 0 0) substrate using zinc acetate and ammonium acetate aqueous solution as precursors by ultrasonic spray pyrolysis. Successful p-type doping can be realized at optimized substrate temperature. The p-type ZnO films show excellent electrical properties such as hole concentration of 10¹⁸ cm⁻³, hole mobility of 10² cm² V⁻¹ s⁻¹ and resistivity of 10⁻² Ω cm. In the photoluminescence measurement, a strong near-band-edge emission was observed, while the deep-level emission was almost undetectable in both undoped and N-doped ZnO films. The growth and doping mechanism of N-doped ZnO films were discussed.     

Nb掺杂ZnO透明导电薄膜的结构以及光电性能研究

采用直流磁控溅射法在玻璃衬底上制备了高质量的Nb掺杂ZnO( NZO)透明导电薄膜.为了研究薄膜厚度对薄膜性质的影响,制备了五个厚度分别为239 nm,355 nm,489 nm,575 nm和679 nm的样品.XRD结果表明,ZnO∶ Nb薄膜是具有六角纤锌矿结构的多晶薄膜,并且具有垂直于衬底的c轴择优取向.随着膜厚的增加,薄膜的结晶质量明显提高.当厚度从239 nm增加到489 nm时,平均晶粒尺寸从19.7 nm增加到24.7 nm,薄膜的电阻率持续减小;当厚度进一步增加时,晶粒尺寸略有减小,电阻率有所增加.本实验获得的最低电阻率为4.896×10-4Ω·cm.随膜厚的增加,光学带隙先增大后减小.所有薄膜在可见光区域的平均透过率均超过88.3;.     

The effect of ZnO buffer layer on structural and optical properties of ZnO nanorods

A low‐temperature synthetic route was used to prepare oriented arrays of ZnO nanorods on ITO conducting glass substrate coated with buffer layer of ZnO seeds in an aqueous solution. The corresponding growth behavior and optical properties of ZnO nanorod arrays were studied. It was found that the nature of the buffer layer had effect on the microstructures and optical properties of the resultant ZnO nanorod arrays. X‐ray diffraction (XRD) results showed the nanorods were preferentially grown along (002) direction, but the diameter of the nanorods prepared with the buffer layer was much smaller than the without one, which can be clearly seen from the scanning electron microscopy (SEM) results. And it also found that the buffer layer was not only enhanced the density of overall coverage but also beneficial to grown the oriented arrays. Photoluminescence spectroscopy (PL) results indicated that the all the samples had the better optical behaviors. By computation, the relative PL intensity ratio of ultraviolet emission (I_UV) to deep level emission (I_DLE) of ZnO nanorods grown with the pure substrate was much higher than that of the sample with the buffer layer. The defects on the surface increased with the size reduction of nanorods caused by the buffer layer may be the main reason for it. And the small shift in the UV emission was caused by the rapid reduction in crystal size and compressive stress from Raman spectra results. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Influence of density of states on optical properties of GaSe thin film

A systematic investigation on the effect of substrate temperature on the structure, optical absorption and density of states of vacuum evaporated gallium monoselenide (GaSe) thin films is reported. The X‐ray diffraction analysis shows an occurrence of amorphous to polycrystalline transformation in the films deposited at higher‐temperature substrates (573K). The compositional analysis is made with Auger Electron Spectroscopy (AES). The thickness of the film (175nm) is measured by a multiple beam interferometery. Optical characteristics of the GaSe sample have been analyzed using spectrophotometer in the photon energy range of 1.0 ‐ 4 eV. The absorption mechanism has been recognized and the allowed indirect as well as forbidden direct transitions have been found. As‐deposited films show two indirect and allowed transitions due to spin‐orbit splitting of the valence band, as reported here for the first time. Low field conduction have enabled us to determine the density of states in amorphous and poly‐GaSe films. The amorphous and polycrystalline GaSe thin films have localized states density values of N (E_F) = 1.686 × 10¹⁷ cm^‐3 eV^‐1 and 1.257 × 10¹⁵ cm^‐3 eV^‐1 respectively. The experimental results are interpreted in terms of variations in the density of localized states due to progressive decrease of the unsaturated bonds during deposition. (© 2004 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

UV,violet and blue‐green luminescence from RF sputter deposited ZnO:Al thin films

The mechanism of ultraviolet (UV), violet and blue green emission from ZnO:Al (AZO) thin films deposited at different radio frequency (r.f.) powers on glass substrates was investigated. The structure and surface morphology of AZO films have also been observed. The optical transmittance spectra shows more than 80% transmittance in the visible region and the band gap is found to be directly allowed. From the photoluminescence measurement, intense UV and blue green luminescence is obtained for the samples deposited at higher sputtering powers. The mechanism of luminescence suggests that UV luminescence of AZO thin film is related to the transition from near band edge to the valence band and the concentration of antisite oxide (O_zn) increases with increase in r.f. power which in turn increases the intensity of green band emission while the violet PL is due to the defect level transition in the grain boundaries of AZO films. (© 2005 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Influence of substrate temperature on microcrystalline structure and optical properties of ZnTe thin films

ZnTe thin films were deposited onto well‐cleaned glass substrates kept at different temperatures (Ts = 303, 373 and 423 K), by vacuum evaporation method under the pressure of 10^–5 Torr. The thickness of the film was measured by quartz crystal monitor and verified by the multiple beam interferometer method. The structural characterization was made using X‐ray diffractometer with filtered CuKα radiation. The grain sizes of the microcrystallines in films increases with increase in substrate temperature. The strain (ε), grain size (D) and dislocation density (δ) was calculated and results are discussed based on substrate temperature. Optical behaviour of the film was analyzed from transmittance spectra in the visible region (400–800 nm). The optical transition in ZnTe films is direct and allowed type. The optical band gap energy shows an inverse dependence on substrate temperature and thickness. (© 2006 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

膜厚对Zr,Al共掺杂ZnO透明导电薄膜结构和光电性能的影响

采用直流磁控溅射法在玻璃衬底上制备出Zr,Al共掺杂ZnO(AZZO)透明导电薄膜.用XRD和SEM分析和观察了薄膜样品的组织结构和表面形貌.研究表明:制备的AZZO透明导电薄膜为六角纤锌矿结构的多晶薄膜,且具有c轴择优取向.另外还研究了薄膜的结构、光学和电学性质随薄膜厚度的变化关系.当薄膜厚度为843 nm时,电阻率具有最小值1.18×10~(-3) Ω·cm,在可见光区(500～800 nm)平均透过率超过93;.     

Structural,optical and electrical properties of Ga-doped and (Ga,Co)-codoped ZnO films

The Ga-doped and (Ga, Co)-codoped ZnO films were grown on quartz glass substrate by inductively coupled plasma enhanced physical vapor deposition. The effect of Co doping and oxygen pressure on the structural, optical, electrical and magnetic properties of the as-grown films was investigated. The structural characterization revealed that high-quality films were grown with wurtzite structure and c-axis preferred crystalline orientation. The surface morphology was affected by Co doping and oxygen pressure. Room-temperature ferromagnetism was observed in (Ga, Co)-codoped ZnO films. We found that the optical and electrical properties were degraded with Co doping. The Ga-doped ZnO films had an average transmittance of above 88% in the visible wavelength, while (Ga, Co)-codoped ZnO showed a lower average transmittance (∼65%) due to the d-d transitions of Co²⁺. The resistivity and Hall mobility of (Ga, Co)-doped ZnO samples were lower than those of Ga-doped ZnO films when grown at the same oxygen pressure.     

Crystallographic,optical and magnetic properties of Co‐doped ZnO thin films synthesized by sol gel route

ZnO thin films with various Co doping levels (0%, 1%, 3%, 5%, 8%, respectively) have been synthesized by sol gel spin coating method on glass substrates. XRD and XPS studies of the films reveal that cobalt ions are successfully doped into ZnO crystal lattice without changing the hexagonal wurtzite structure. The morphologies are studied by SEM and AFM and show wrinkle network structures with uniform size distribution. With Co doping concentration increasing, the wrinkle network width decreases gradually. The transmittance spectra indicate that Co doping can effectively reduce the optical bandgap of ZnO thin films. Photoluminescence show that all samples have ultraviolet, violet and green emission. When Co doping concentration increases up to 5%, the intensity of violet emission is greatly increased and a strong deep blue emission centered at 439 nm appears. The ferromagnetism of all samples was observed at room temperature. The emission mechanisms and ferromagnetism origination are discussed in detail. (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)