Synthesis and Raman spectroscopic study of Mg/Al,Fe hydrotalcites with variable cationic ratios

Hydrotalcites of formula Mg₆(Al,Fe)₂(OH)₁₆(CO₃)·4H₂O formed by intercalation with the carbonate anion as a function of divalent/trivalent cationic ratio have been successfully synthesised. The XRD patterns show variation in the d‐spacing attributed to the size of the cation. Raman and infrared bands in the OH stretching region are assigned to (1) brucite layer OH stretching vibrations, (2) water stretching bands and (3) water strongly hydrogen bonded to the carbonate anion. Multiple (CO₃)²⁻ symmetric stretching bands suggest that different types of (CO₃)²⁻ exist in the hydrotalcite interlayer. Increasing the cation ratio (Mg/Al,Fe) resulted in an increase in the combined intensity of the two Raman bands at around 3600 cm⁻¹, attributed to Mg OH stretching modes, and a shift of the overall band profile to higher wavenumbers. These observations are believed to be a result of the increase in magnesium in the structure. Raman spectroscopy shows a reduction in the symmetry of the carbonate, leading to the conclusion that the anions are bonded to the brucite‐like hydroxyl surface and to the water in the interlayer. Water bending modes are identified in the infrared spectra at positions greater than 1630 cm⁻¹, indicating that water is strongly hydrogen bonded to both interlayer anions and the brucite‐like surface. Copyright © 2009 John Wiley & Sons, Ltd.     

A2( MoO4)3(A=Al,Cr,Fe)结构与相变的Raman光谱研究

用XRD、Raman光谱和DSC研究了Al2 (MoO4)3、Cr2( MoO4)3和Fe2 (MoO4)3的结构与相变.Al2(MoO4)3、Cr2 (MoO4)3和Fe2 (MoO4)3在室温下为单斜相,分别在483 K、673 K和783 K附近转变为正交相.发现MO4四面体的对称和反对称伸缩振动模的频率和相对强...     

Dehydration of Na‐jarosite,ferricopiapite, and rhomboclase at temperatures of 50 and 95 °C: implications for Martian ferric sulfates

Ferric sulfates with various hydration degrees were found on Mars by surface exploration and orbital remote sensing. The processes that they experienced during their formation and alteration relate to Martian hydrologic history and thus have been important topics for laboratory investigations. This study reports three sets of dehydration experiments conducted on Na‐jarosite, ferricopiapite, and rhomboclase under two relative humidity conditions (5–6% RH and 10–11% RH) at two temperatures (50 and 95 °C), for which laser Raman spectroscopy and gravimetric measurements were the only two techniques used, in situ and non‐invasively, to monitor the progress of these experiments. Our dehydration experiments show that OH‐bearing Na‐jarosite is relatively stable at 95 °C and RH < 11%, while H₂O/OH‐bearing ferricopiapite and rhomboclase have converted almost entirely into anhydrous phases. These results have important applications on uncovering the mystery of rarely detected Martian ferric sulfates and on interpreting Mars remote sensing data. Copyright © 2015 John Wiley & Sons, Ltd.     

Raman spectroscopic study of the tellurite minerals: emmonsite Fe23+Te34+O9·2H2O and zemannite Mg0.5[Zn2+Fe3+(TeO3)3]4.5H2O

Raman spectroscopy has been used to study zemannite Mg_0.5[Zn²⁺Fe³⁺(TeO₃)₃]4.5H₂O and emmonsite Fe₂³⁺Te₃⁴⁺O₉·2H₂O. Raman bands for zemannite and emmonsite, observed at 740 and 650 cm⁻¹ and at 764 and 788 cm⁻¹, respectively, are attributed to the ν₁ (TeO₃)²⁻ symmetric stretching mode. The splitting of the symmetric stretching mode for emmonsite is in harmony with the results of X‐ray crystallography which shows three non‐equivalent TeO₃ units in the crystal structure. Two bands at 658 and 688 cm⁻¹ are assigned to ν₃ (TeO₃)²⁻ anti‐symmetric stretching modes. Raman bands observed at 372 and 408 cm⁻¹ for zemannite and 397 and 414 cm⁻¹ for emmonsite are attributed to the (TeO₃)²⁻ν₂(A₁) bending mode. The two Raman bands at 400 and 440 cm⁻¹ for emmonsite are ascribed to the ν₄(E) bending modes, while the band at 326 cm⁻¹ is due to the ν₂(A₁) bending vibration. Copyright © 2008 John Wiley & Sons, Ltd.     

A Raman spectroscopic study of copiapites Fe2+Fe3+(SO4)6(OH)2 · 20H2O: environmental implications

Raman spectroscopy has been used to study selected mineral samples of the copiapite group. Copiapite (Fe²⁺Fe³⁺(SO₄)₆(OH)₂ · 20H₂O) is a secondary mineral formed through the oxidation of pyrite. Minerals of the copiapite group have the general formula AFe₄(SO₄)₆(OH)₂ · 20H₂O, where A has a + 2 charge and can be either magnesium, iron, copper, calcium and/or zinc. The formula can also be B_2/3Fe₄(SO₄)₆(OH)₂ · 20H₂O, where B has a + 3 charge and may be either aluminium or iron. For each mineral, two Raman bands are observed at around 992 and 1029 cm⁻¹, assigned to the (SO₄)²⁻ν₁ symmetric stretching mode. The observation of two bands provides evidence for the existence of two non‐equivalent sulfate anions in the mineral structure. Three Raman bands at 1112, 1142 and 1161 cm⁻¹ are observed in the Raman spectrum of copiapites, indicating a reduction of symmetry of the sulfate anion in the copiapite structure. This reduction in symmetry is supported by multiple bands in the ν₂ and ν₄(SO₄)²⁻ spectral regions. Copyright © 2010 John Wiley & Sons, Ltd.     

Raman spectroscopic study of the selenite mineral mandarinoite Fe2Se3O9·6H2O

Selenites and tellurites may be subdivided according to formula and structure. There are five groups, based upon the formulae (a) A(XO₃), (b) A(XO₃·) xH₂O, (c) A₂(XO₃)₃·xH₂O, (d) A₂(X₂O₅) and (e) A(X₃O₈). Of the selenites, molybdomenite is an example of type (a); chalcomenite, clinochalcomenite, cobaltomenite and ahlfeldite are minerals of type (b); mandarinoite Fe₂Se₃O₉·6H₂O is an example of type (c). Raman spectroscopy has been used to characterise the mineral mandarinoite. The intense, sharp band at 814 cm⁻¹ is assigned to the symmetric stretching (Se₃O₉)⁶⁻ units. Three Raman bands observed at 695, 723 and 744 cm⁻¹ are attributed to the ν₃ (Se₃O₉)⁶⁻ anti‐symmetric stretching modes. Raman bands at 355, 398 and 474 cm⁻¹ are assigned to the ν₄ and ν₂ bending modes. Raman bands are observed at 2796, 2926, 3046, 3189 and 3507 cm⁻¹ and are assigned to OH stretching vibrations. The observation of multiple OH stretching vibrations suggests the non‐equivalence of water in the mandarinoite structure. The use of the Libowitzky empirical function provides hydrogen bond distances of 2.633(9) Å (2926 cm⁻¹), 2.660(0) Å (3046 cm⁻¹), 2.700(0) Å (3189 cm⁻¹) and 2.905(3) Å (3507 cm⁻¹). The sharp, intense band at 3507 cm⁻¹ may be due to hydroxyl units. It is probable that some of the selenite units have been replaced by hydroxyl units. Copyright © 2008 John Wiley & Sons, Ltd.     

Raman spectroscopic study of the antimonate mineral bahianite Al5Sb35+O14(OH)2

Raman spectroscopy has been used to characterize the antimonate mineral bahianite Al₅Sb₃⁵⁺O₁₄(OH)₂, a semi‐precious gemstone. The mineral is characterized by an intense Raman band at 818 cm⁻¹ assigned to Sb₃O₁₄¹³⁻ stretching vibrations. Other lower intensity bands at 843 and 856 cm⁻¹ are also assigned to this vibration, and this concept suggests the non‐equivalence of SbO units in the structure. Low‐intensity Raman bands at 669 and 682 cm⁻¹ are probably assignable to the OSbO antisymmetric stretching vibrations. Raman bands at 1756, 1808 and 1929 cm⁻¹ may be assigned to δ SbOH deformation modes, while the bands at 3462 and 3495 cm⁻¹ are assigned to AlOH stretching vibrations. The complexity in the low wave number region is attributed to the composition of the mineral. Copyright © 2009 John Wiley & Sons, Ltd.     

A Raman spectroscopic study of teeth affected with molar–incisor hypomineralisation

Raman spectroscopy was used to chemically map lesions associated with molar–incisor hypomineralisation in human teeth. Three teeth with hypomineralised lesions of differing severity, described as white, yellow or brown, were mapped using integral ratios of major component bands (hydroxyapatite, amide I and b‐type carbonate) and principal component analysis scores values. These lesions were found to contain depleted levels of mineral (hydroxyapatite) compared with those of healthy enamel. Principal component analysis also highlighted changes in the phosphate structure and variations in various organic constituents. These variations were consistent with increased disorder in the mineral component of the hypomineralised tooth lesions. Scanning electron microscopy–energy dispersive X‐ray spectroscopy supported the findings based on Raman spectroscopy. Copyright © 2015 John Wiley & Sons, Ltd.     

Raman spectroscopic study of the mixed anion mineral yecoraite Bi5Fe3O9(Te4+O3)(Te6+O4)2·9H2O

Tellurates are rare minerals as the tellurate anion is readily reduced to the tellurite ion. Often minerals with both tellurate and tellurite anions are found. An example of such a mineral containing tellurate and tellurite is yecoraite. Raman spectroscopy has been used to study this mineral, the exact structure of which is unknown. Two Raman bands at 796 and 808 cm⁻¹ are assigned to the ν₁(TeO₄)²⁻ symmetric and ν₃(TeO₃)²⁻ antisymmetric stretching modes and Raman bands at 699 cm⁻¹ are attributed to the ν₃(TeO₄)²⁻ antisymmetric stretching mode and the band at 690 cm⁻¹ to the ν₁(TeO₃)²⁻ symmetric stretching mode. The intense band at 465 cm⁻¹ with a shoulder at 470 cm⁻¹ is assigned the (TeO₄)²⁻ and (TeO₃)²⁻ bending modes. Prominent Raman bands are observed at 2878, 2936, 3180 and 3400 cm⁻¹. The band at 3936 cm⁻¹ appears quite distinct and the observation of multiple bands indicates the water molecules in the yecoraite structure are not equivalent. The values for the OH stretching vibrations listed provide hydrogen bond distances of 2.625 Å (2878 cm⁻¹), 2.636 Å (2936 cm⁻¹), 2.697 Å (3180 cm⁻¹) and 2.798 Å (3400 cm⁻¹). This range of hydrogen bonding contributes to the stability of the mineral. A comparison of the Raman spectra of yecoraite with that of tellurate containing minerals kuranakhite, tlapallite and xocomecatlite is made. Copyright © 2009 John Wiley & Sons, Ltd.     

Local structure of hydroxy-peroxy apatite: A combined XRD, FT-IR, Raman, SEM, and solid-state NMR study

The synthesized hydroxyapatite (HAp) and hydroxy-peroxy apatite are studied using various techniques, such as X-ray powder diffraction, FT-IR and Raman spectroscopy, scanning electron microscopy, and solid-state NMR spectroscopy. The experimental data suggest that hydroxy-peroxy apatite contains a small amount of hydration of partially dehydroxylated hydroxyapatite phase and calcium hydroxide. The incorporation of peroxide ions into the lattice of HAp causes perturbations of the hydrogen environments and slight changes in its crystal morphology. The distance between H in some structural OH⁻ and adjacent O along the c-axis becomes longer instead of forming a hydrogen bond after the incorporation of peroxide ions.     

New evidences of in situ laser irradiation effects on γ‐Fe2O3 nanoparticles: a Raman spectroscopic study

The nature of the physical mechanisms responsible for the structural modification of the γ‐Fe₂O₃ nanoparticles under laser irradiation has been investigated by Raman spectroscopy. In situ micro‐Raman measurements were carried out on as‐prepared γ‐Fe₂O₃ nanoparticles about 4 nm in size as a function of laser power and on annealed γ‐Fe₂O₃ particles. A baseline profile analysis clearly evidenced that the phase transition from maghemite into hematite is caused by local heating due to laser irradiation with an increase of grain size of nanoparticles. This increasing was clearly determined by X‐ray diffraction from 4 nm in nanoparticles up to more than 177 nm beyond 900 °C in a polycrystalline state. Copyright © 2010 John Wiley & Sons, Ltd.     

Raman and XRD study on brookite–anatase coexistence in cathodic electrosynthesized titania

Among the many methods developed for the synthesis of titanium dioxide, cathodic electrosynthesis has not received much attention because the resulting amorphous oxy‐hydroxide matrix demands a further thermal annealing step to be transformed into crystalline titania. However, the possibility of filling deep recessed templates by the control of the solid–liquid interface makes it a potentially suitable technique for the fabrication of porous scaffolds for photovoltaics and photocatalysis. Furthermore, a careful control of the crystallization process enables the growth of larger grains with lower density of grain boundaries, which act as electron traps that slow down electronic transport and promote charge recombination. In this report, well crystallized titania deposits were obtained by thermal annealing of amorphous deposits fabricated by cathodically assisted electrosynthesis on indium‐tin oxide (ITO)substrates. The combined use of Raman spectroscopy and X‐ray diffraction showed that the crystallization process is more intricate than previously assumed. It is shown that the amorphous matrix evolves into a rutile‐free mixture of brookite and anatase at temperatures as low as 200 °C that persists up to 800 °C, when pure anatase dominates. The amount of brookite in the brookite–anatase mixture reaches a maximum at 400 °C. This very simple method for obtaining a brookite–anatase mixture and the ability to tune their proportions by thermal annealing is a promising alternative whose potential for solar cells and photocatalysis deserves a careful evaluation. Copyright © 2011 John Wiley & Sons, Ltd.     

Raman spectroscopic study of the minerals diadochite and destinezite Fe3+2(PO4,SO4)2(OH)· 6H2O: implications for soil science

The two minerals diadochite and destinezite of formula Fe₂(PO₄,SO₄)₂(OH)· 6H₂O have been characterised by Raman spectroscopy and complemented with infrared spectroscopy. Both these minerals are found in soils and are identical except for their morphology. Diadochite is amorphous whereas destinezite is highly crystalline. The spectra of diadochite are broad and ill defined, whereas the spectra of destinezite are intense and well defined. Bands are assigned to phosphate and sulfate stretching and bending modes. Two symmetric stretching modes for both phosphate and sulfate support the concept of non‐equivalent phosphate and sulfate units in the mineral structure. Multiple water bending and stretching modes imply that non‐equivalent water molecules in the structure exist with different hydrogen‐bond strengths. Copyright © 2011 John Wiley & Sons, Ltd.     

Raman spectroscopic study of the antimonate mineral brandholzite Mg[Sb2(OH)12]·6H2O

Raman spectra of brandholzite Mg[Sb₂(OH)₁₂]·6H₂O were studied, complemented with infrared spectra, and related to the structure of the mineral. An intense Raman sharp band at 618 cm⁻¹ is attributed to the SbO symmetric stretching mode. The low‐intensity band at 730 cm⁻¹ is ascribed to the SbO antisymmetric stretching vibration. Low‐intensity Raman bands were found at 503, 526 and 578 cm⁻¹. Corresponding infrared bands were observed at 527, 600, 637, 693, 741 and 788 cm⁻¹. Four Raman bands observed at 1043, 1092, 1160 and 1189 cm⁻¹ and eight infrared bands at 963, 1027, 1055, 1075, 1108, 1128, 1156 and 1196 cm⁻¹ are assigned to δ SbOH deformation modes. A complex pattern resulting from the overlapping band of the water and hydroxyl units is observed. Raman bands are observed at 3240, 3383, 3466, 3483 and 3552 cm⁻¹; infrared bands at 3248, 3434 and 3565 cm⁻¹. The Raman bands at 3240 and 3383 cm⁻¹ and the infrared band at 3248 cm⁻¹ are assigned to water‐stretching vibrations. The two higher wavenumber Raman bands observed at 3466 and 3552 cm⁻¹ and two infrared bands at 3434 and 3565 cm⁻¹ are assigned to the stretching vibrations of the hydroxyl units. Observed Raman and infrared bands in the OH stretching region are associated with O‐H···O hydrogen bonds and their lengths 2.72, 2.79, 2.86, 2.88 and 3.0 Å (Raman) and 2.73, 2.83 and 3.07 Å (infrared). Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis of hafnium tungstate by a CO2 laser and its microstructure and Raman spectroscopic study

Densely packed hafnium tungstate blocks were synthesized by rapid solidification with a CO₂ laser. It is shown that the optimum synthesis conditions for HfW₂O₈ are around 700 W laser power and 1 mm/s scan speed. Scanning electron microscopy (SEM) observation shows that the blocks consist of oriented nano‐threads/rods that grew horizontally on the surface region and vertically in the interior. The orientations of the nanostructures are governed by the heat transfer directions on the surface and in the interior. Raman spectroscopic and X‐ray diffraction studies show that the samples solidified in the cubic structure with minor contents of the orthorhombic phase. This is explained by a compressive stress induced during the rapid solidification process due to a sudden drop of temperature of the molten pool to the ambient. The stress is estimated to be about 0.6 GPa by comparison with high‐pressure Raman study. Some specific Raman bands appear in the samples synthesized with the laser synthetic route but not in the sample by solid‐state reaction. Copyright © 2008 John Wiley & Sons, Ltd.     

Raman spectroscopic study of the multi‐anion mineral dixenite CuMn2+14Fe3+(AsO3)5(SiO4)2(AsO4)(OH)6

The mixed anion mineral dixenite has been studied by Raman spectroscopy, complemented with infrared spectroscopy. The Raman spectrum of dixenite shows bands at 839 and 813 cm⁻¹ assigned to the (AsO₃)³⁻ symmetric and antisymmetric stretching modes. The most intense Raman band of dixenite is the band at 526 cm⁻¹ and is assigned to the ν₂ AsO₃³⁻ bending mode. DFT calculations enabled the calculation of the position of AsO₂²⁻ symmetric stretching mode at 839 cm⁻¹, the antisymmetric stretching mode at 813 cm⁻¹, and the deformation mode at 449 cm⁻¹. The Raman bands at 1026 and 1057 cm⁻¹ are assigned to the SiO₄²⁻ symmetric stretching vibrations and those at 1349 and 1386 cm⁻¹ to the SiO₄²⁻ antisymmetric stretching vibrations. Both Raman and infrared spectra indicate the presence of water in the structure of dixenite. This brings into question the commonly accepted formula of dixenite as CuMn²⁺₁₄Fe³⁺(AsO₃)₅(SiO₄)₂(AsO₄)(OH)₆. The formula may be better written as CuMn²⁺₁₄Fe³⁺(AsO₃)₅(SiO₄)₂(AsO₄)(OH)₆·xH₂O. Copyright © 2009 John Wiley & Sons, Ltd.     

Raman spectroscopic study of the selenite minerals—chalcomenite CuSeO3·2H2O,clinochalcomenite and cobaltomenite

Raman spectroscopy has been used to study the dimorphous selenite minerals chalcomenite, cobaltomenite and clinochalcomenite. Selenite minerals are characterised by the position of the symmetric stretching mode that is observed at higher wavenumbers than the anti‐symmetric stretching mode. The selenite ion has C_3v symmetry and four modes, 2A₁ and 2E. These modes are observed at 813, 472 cm⁻¹ (A₁) and 685, 710, 727 and 367 and 396 cm⁻¹ (E). Bands assigned to the water stretching vibrations are observed for chalcomenite at 2953, 3184 and 3506 cm⁻¹ and for clinochalcomenite at 2909, 3193 and 3507 cm⁻¹. A comparison of the Raman spectra of chalcomenite, clinochalcomenite and cobaltomenite is made. The position of these bands enabled hydrogen bond distances in the selenite structure to be estimated. Hydrogen bond distances for chalcomenite and clinochalmenite were determined to be similar. Copyright © 2008 John Wiley & Sons, Ltd.     

Al‐for‐Fe substitution in hematite: the effect of low Al concentrations in the Raman spectrum of Fe2O3

Five different mixed Al‐hematites with an aluminium molar content varying from 0 to 10% were investigated by micro‐Raman spectroscopy to study the effect of Al‐for‐Fe substitution on the hematite lattice. A red shift of hematite vibrational wavenumbers and a line broadening were observed; also a shoulder located near 430 cm⁻¹ and a broad band at 670 cm⁻¹ developed. The variation of the spectral features is discussed in terms of a local disorder correlated to the insertion of Al³⁺ ions into the Fe(O)₆ octahedra constituting hematite structure. A multivariate analysis was also carried out on the spectral data to distinguish between the doped samples analysed. Copyright © 2007 John Wiley & Sons, Ltd.     

Raman spectroscopic study of the selenite mineral: ahlfeldite,NiSeO3·2H2O

Raman spectroscopy has been used to study the selenite mineral ahlfeldite. A comparison is made with the Raman spectra of chalcomenite, cobaltomenite and clinochalcomenite. Selenite minerals are characterised by the position of the symmetric stretching mode which is observed at higher wavenumbers than the anti‐symmetric stretching mode. The selenite ion has C_3v symmetry and four modes, 2A₁ and 2E. These modes are observed at 813, 472 cm⁻¹ (A₁) and 685, 710, 727 and 367 and 396 cm⁻¹ (E). Bands assigned to the water stretching vibrations are observed for ahlfeldite at 3385 cm⁻¹, for chalcomenite at 2953, 3184 and 3506 cm⁻¹ and for clinochalcomenite at 2909, 3193 and 3507 cm⁻¹. A comparison of the Raman spectra of chalcomenite, clinochalcomenite and cobaltomenite is made. The position of these bands enabled hydrogen bond distances in the selenite structure to be estimated. Hydrogen bond distances for ahlfeldite, chalcomenite and clinochalcomenite were determined to be similar. Copyright © 2008 John Wiley & Sons, Ltd.