Lithium ion transport and ion-polymer interaction in PEO based polymer electrolyte plasticized with ionic liquid

The polyethylene oxide (PEO) based lithium ion conducting polymer electrolytes complexed with lithium trifluoromethanesulfonate (LiCF₃SO₃ or LiTf) plasticized with an ionic liquid 1-ethyl 3-methyl imidazolium trifluoromethanesulfonate (EMITf) have been reported. Morphological, spectroscopic, thermal and electrochemical investigations demonstrate promising characteristics of the polymer films, suitable as electrolyte in various energy storage/conversion devices. Significant structural changes have been observed in the polymer electrolyte due to the ionic liquid addition, investigated by X-ray diffraction (XRD) and optical microscopy. The ion-polymer interaction, particularly the interaction of imidazolium cation with PEO chains, has been evidenced by IR and Raman spectroscopic studies. The optimized composition of the polymer electrolyte i.e. PEO_25.LiTf + 40 wt.% EMITf offer room temperature ionic conductivity of ~ 3 × 10^− 4 S cm^− 1 with wide electrochemical stability window and excellent thermal stability. The ‘σ versus 1/T’ curves show apparent Arrhenius behavior below and above melting temperature. The ionic conductivity has been observed due to Li⁺ ions, as confirmed from ⁷Li-NMR studies, though the component ions of ionic liquid and anions also contribute significantly to the overall conductivity.     

Structural, vibrational, thermal, and electrical properties of PVA/PVP biodegradable polymer blend electrolyte with CH3COONH4

A biodegradable solid polymer blend electrolyte was prepared by using polyvinyl alcohol (PVA) and polyvinyl pyrrolidone (PVP) polymers with different molecular weight percentages (wt.%) of ammonium acetate, and its structural, thermal, vibrational, and electrical properties were evaluated. The polymer blend electrolyte is prepared using solution casting technique, with water as a solvent. X-ray diffraction shows that the incorporation of ammonium acetate into the polymeric matrix causes decrease in the crystallinity degree of the samples. The Fourier transform infrared spectroscopy and laser Raman studies confirm the complex formation between the polymer and salt. Differential scanning calorimerty shows that the thermal stability of the polymer blend electrolyte and the glass transition temperature decreased as the concentration of ammonium acetate increased. The ionic conductivity of the prepared polymer electrolyte was found by AC impedance spectroscopic analysis. A maximum conductivity of 8.12?×?10^?5 Scm^?1 was observed for the composition of 50 PVA/50 PVP/30 wt.% of CH₃COONH₄.     

Raman polarization studies of highly oriented organic thin films

In this work we report on the capability of polarized Raman spectroscopy to investigate the structure of thin organic films. Diindenoperylene (DIP) thin films on (1 × 1)‐rutile(110) were prepared via organic molecular beam deposition (OMBD). Raman spectra of DIP thin films showed several strong Raman modes in the wavenumber region from 1200 to 1650 cm⁻¹. The A_g mode at 1284 cm⁻¹ shows two contributions, thereby indicating the coexistence of at least two DIP film structures. Polarized Raman spectroscopy was applied to characterize the molecular orientation and the dominance of the σ‐configuration (i.e. upright standing DIP molecules) was found. Copyright © 2009 John Wiley & Sons, Ltd.     

Near‐infrared Raman spectroscopy for gastric precancer diagnosis

Raman spectroscopy is a molecular vibrational spectroscopic technique that is capable of optically probing the biomolecular changes associated with neoplastic transformation. The purpose of this study was to apply near‐infrared (NIR) Raman spectroscopy for differentiating dysplasia from normal gastric mucosa tissue. A total of 65 gastric mucosa tissues (44 normal and 21 dysplasia) were obtained from 35 patients who underwent endoscopy investigation or gastrectomy operation for this study. A rapid NIR Raman system was utilized for tissue Raman spectroscopic measurements at 785‐nm laser excitation. High‐quality Raman spectra in the range of 800–1800 cm⁻¹ can be acquired from gastric mucosa tissue within 5 s. Raman spectra showed significant differences between normal and dysplastic tissue, particularly in the spectral ranges of 850–1150, 1200–1500 and 1600–1750 cm⁻¹, which contained signals related to proteins, nucleic acids and lipids. The diagnostic decision algorithm based on the combination of Raman peak intensity ratios of I₈₇₅/I₁₄₅₀ and I₁₂₀₈/I₁₆₅₅ and the logistic regression analysis yielded a diagnostic sensitivity of 90.5% and specificity of 90.9% for identification of gastric dysplasia tissue. This work demonstrates that NIR Raman spectroscopy in conjunction with intensity ratio algorithms has the potential for the noninvasive diagnosis and detection of precancer in the stomach at the molecular level. Copyright © 2009 John Wiley & Sons, Ltd.     

Raman scattering of L‐tryptophan enhanced by surface plasmon of silver nanoparticles: vibrational assignment and structural determination

Vibrational bands of L ‐tryptophan which was adsorbed on Ag nanoparticles (∼10 nm in diameter) have been investigated in the spectral range of 200–1700 cm⁻¹ using surface‐enhanced Raman scattering (SERS) spectroscopy. Compared with the normal Raman scattering (NRS) of L ‐tryptophan in either 0.5 M aqueous solution (NRS‐AS) or solid powder (NRS‐SP), the intensified signals by SERS have made the SERS investigation at a lower molecular concentration (5 × 10⁻⁴ M ) possible. Ab initio calculations at the B3LYP/6‐311G level have been carried out to predict the optimal structure and vibrational wavenumbers for the zwitterionic form of L ‐tryptophan. Facilitated with the theoretical prediction, the observed vibrational modes of L ‐tryptophan in the NRS‐AS, NRS‐SP, and SERS spectra have been analyzed. In the spectroscopic observations, there are no significant changes for the vibrational bands of the indole ring in either NRS‐AS, NRS‐SP, or SERS. In contrast, spectral intensities involving the vibrations of carboxylate and amino groups are weak in NRS‐AS and NRS‐SP, but strong in SERS. The intensity enhancement in the SERS spectrum can reach 10³–10⁴‐fold magnification. On the basis of spectroscopic analysis, the carboxylate and amino groups of L ‐tryptophan are determined to be the preferential terminal groups to attach onto the surfaces of Ag nanoparticles in the SERS measurement. Copyright © 2008 John Wiley & Sons, Ltd.     

Quantitative Raman spectroscopy: speciation of cesium silicate glasses

The silicate speciation forms an important aspect of the structure of silicate melts, a subject of interest to both the earth‐ and materials science communities. In this study, the Qⁿ speciation of binary cesium silicate glasses was studied by Raman spectroscopy. A method to extract the equilibrium constant from a set of Raman spectra is presented, and the least‐squares optimization algorithm is given (in Supporting Information). Log(K), the equilibrium constant of the speciation reaction, 2Q³ = Q⁴ + Q², equals −2.72 ± 0.11 at the glass transition. This extends the previously established correlation between log(K) and the inverse of the ionic radius of the network modifier to cesium. Copyright © 2009 John Wiley & Sons, Ltd.     

Study of Raman spectrum of uranium using a surface‐enhanced Raman scattering technique

Raman spectroscopic investigation on weak scatterers such as metals is a challenging scientific problem. Technologically important actinide metals such as uranium and plutonium have not been investigated using Raman spectroscopy possibly due to poor signal intensities. We report the first Raman spectrum of uranium metal using a surface‐enhanced Raman scattering‐like geometry where a thin gold overlayer is deposited on uranium. Raman spectra are detected from the pits and scratches on the sample and not from the smooth polished surface. The 514.5‐ and 785‐nm laser excitations resulted in the Raman spectra of uranium metal whereas 325‐nm excitation did not give rise to such spectra. Temperature dependence of the B_3g mode at 126 cm⁻¹ is also investigated. Copyright © 2011 John Wiley & Sons, Ltd.     

Ionic liquid structure: the conformational isomerism in 1‐butyl‐3‐methyl‐imidazolium tetrafluoroborate ([bmim][BF4])

As a probe of local structure, the vibrational properties of the 1‐butyl‐3‐methylimidazolium tetrafluoroborate [bmim][BF₄] ionic liquid were studied by infrared (IR), Raman spectroscopy, and ab initio calculations. The coexistence of at least four [bmim]⁺ conformers (GG, GA, TA, and AA) at room temperature was established through unique spectral responses. The Raman modes characteristic of the two most stable [bmim]⁺ conformers, GA and AA, according to the ab initio calculations, increase in intensity with decreasing temperature. To assess the total spectral behavior of the ionic liquid both the contributions of different [bmim]⁺ conformers and the [bmim]⁺− [BF₄]⁻ interactions to the vibrational spectra are discussed. Copyright © 2008 John Wiley & Sons, Ltd.     

High‐resolution stimulated Raman spectroscopy and analysis of line positions and assignments for the ν2 and ν3 bands of 13C2H4

High‐resolution stimulated Raman spectra of¹³C₂H₄ in the regions of the ν₂ and ν₃ Raman active modes have been recorded at two temperatures (145 and 296 K) based on the quasi continuous‐wave (cw) stimulated Raman spectrometer at Instituto de Estructura de la Materia IEM‐CSIC in Madrid. A tensorial formalism adapted to X₂Y₄ planar asymmetric tops with D_2h symmetry (developed in Dijon) and a program suite called D_2hTDS (now part of the XTDS/SPVIEW spectroscopic software) were proposed to analyze and calculate the high‐resolution spectra. A total of 103 and 51 lines corresponding to ν₂ and ν₃ Raman active modes have been assigned and fitted in wavenumber with a global root mean square deviation of 0.54 × 10⁻³ and 0.36 × 10⁻³ cm⁻¹, respectively. Due to the fact that the Raman scattering effect is weak, we did not perform in this contribution the line intensities analysis. Copyright © 2016 John Wiley & Sons, Ltd.     

FT‐Raman and FTIR spectroscopic characterization of biogenic carbonates from Philippine venus seashell and Porites sp. coral

Some seashells of the Philippine venus species and sea coral of Porites sp. were studied by means of FT‐Raman, Fourier transform infrared spectroscopy (FTIR) and Far‐FTIR spectroscopic methods. The Raman spectra show that both Porites sp. and P. venus are of aragonite‐structured CaCO₃. Detailed spectral analysis, however, reveals some small differences, due to differences in the crystallite size or habit and to different minor element contents. IR spectra show that Porites sp. contains also some small quantities of calcite‐structured carbonates. The ν₂ band (shoulder) of calcite at 875.7 cm⁻¹ is present in the IR spectrum. The separation of the two ν₂ bands (856.4 cm⁻¹ for aragonite and 875.7 cm⁻¹ for calcite) suggests the absence of solid solution of the two polymorphic phases of CaCO₃. Spectroscopic results were confirmed also by X‐ray powder diffraction measurements. Copyright © 2008 John Wiley & Sons, Ltd.     

Single‐Cell Investigations of Silver Nanoparticle–Bacteria Interactions

Interaction of bacteria with citrate‐reduced silver nanoparticles (AgNPs) of size 25 nm ± 8.5 nm is studied using Raman spectroscopy in conjunction with plasmon resonance imaging of single bacterial cells. Distribution of isolated nanoparticles (NPs) inside Escherichia coli (ATCC 25922; E. coli) is observed by hyperspectral imaging (HSI) as a function of incubation time. Time‐dependent degradation of bacterial DNA upon incubation of AgNPs with E. coli is proven by Raman spectroscopic studies. While attachment of NPs is evident in HSI, molecular changes are evident from the surface‐enhanced Raman spectra of adsorbed DNA and its fragments. Distinct enhancement of DNA features is observed upon interaction of AgNPs and the number of such distinct features increases with incubation time, reaches a maximum, and decreases afterwards. This systematic interaction of DNA with the NPs system and its gradual chemical evolution is proven by investigating isolated plasmid DNA. A comparative Raman study with silver ions has shown that DNA features are observable only when bacteria are incubated with AgNPs. Energetics of interaction examined with microcalorimetry suggests the exothermicity of ?1.547 × 10¹⁰ cal mol^?1 for the NP–bacteria system. Specific interaction of AgNPs with exocyclic nitrogen present in the bases, adenine, guanine, and cytosine, leads to the changes in DNA.     

Infrared and Raman Spectroscopic Characterization of the Silicate Mineral Gilalite Cu5Si6O17 · 7H2O

Gilalite is a copper silicate mineral with a general formula of Cu₅Si₆O₁₇ · 7H₂O. The mineral is often found in association with another copper silicate mineral, apachite, Cu₉Si₁₀O₂₉ · 11H₂O. Raman and infrared spectroscopy have been used to characterize the molecular structure of gilalite. The structure of the mineral shows disorder, which is reflected in the difficulty of obtaining quality Raman spectra. Raman spectroscopy clearly shows the absence of OH units in the gilalite structure. Intense Raman bands are observed at 1066, 1083, and 1160 cm^?1.

The Raman band at 853 cm^?1 is assigned to the –SiO₃ symmetrical stretching vibration and the low-intensity Raman bands at 914, 953, and 964 cm^?1 may be ascribed to the antisymmetric SiO stretching vibrations. An intense Raman band at 673 cm^?1 with a shoulder at 663 cm^?1 is assigned to the ν₄ Si-O-Si bending modes. Raman spectroscopy complemented with infrared spectroscopy enabled a better understanding of the molecular structure of gilalite.     

Vibrational Spectroscopic Characterization of the Sulphate-Carbonate Mineral Burkeite: Implications for Evaporites

Burkeite formation is important in saline evaporites and in pipe scales. Burkeite is an anhydrous sulphate-carbonate with an apparent variable anion ratio. Such a formula with two oxyanions lends itself to vibrational spectroscopy. Two symmetric sulphate stretching modes are observed, indicating at least at the molecular level the nonequivalence of the sulphate ions in the burkeite structure. The strong Raman band at 1065 cm^?1 is assigned to the carbonate symmetric stretching vibration. The series of Raman bands at 622, 635, 645, and 704 cm^?1 are assigned to the ν₄ sulphate bending modes. The observation of multiple bands supports the concept of a reduction in symmetry of the sulphate anion from T _d to C _3v or even C _2v.     

Comparison of molecular images as defined by Raman spectra between normal mucosa and squamous cell carcinoma in the oral cavity

Raman spectroscopy has been effectively applied to clinically differentiate normal and cancerous mucosal tissues. Micro‐Raman spectroscopy provides a tool to better understand the molecular basis for the Raman clinical signal. The objective of the current study was to utilize micro‐Raman spectroscopy to define the molecular/spectral differences between normal and abnormal squamous cell carcinoma (SCC) in oral mucosa (in vitro). Understanding this may help in identifying unique spectra or may be useful for in vivo application of this technology. Micro‐Raman (confocal) spectroscopy was used to obtain molecular images of normal and SCC cells of human oral mucosa. Four fresh flashed‐frozen tumor and four matched normal tongue specimens were studied. The spectra covered a wavenumber range from 300 to 4000 cm⁻¹ with a spectral resolution of 8 cm⁻¹ and a spatial resolution of 1.0 µm. The cells were located within thin sections of tongue mucosa biopsies. The excitation wavelength of 515 nm was used. We were able to obtain Raman images with rich information about the spectroscopic and structural features within the cytoplasm, cell membrane, and cell nuclei. Significant spectral differences were observed between the Raman images of normal and malignant squamous cells. The heterogeneity of tumor cells within the abnormal tissue was also demonstrated. Spectral differences demonstrated between both tissue types have provided important information regarding the origins of specific signals within the cells of each tissue type. In our search for specific spectral biomarkers, we believe that a cell surface protein, greatly upregulated in SCC cells, was discovered at 1583 cm⁻¹. Copyright © 2010 John Wiley & Sons, Ltd.     

Raman spectroscopy to probe residual stress in ZnO nanowire

Raman spectroscopic studies are performed to probe the stress along the length of a bent ZnO nanowire. The zone‐centre E₂^high optical phonon shows a systematic red shift as the junction point of the two arms of the nanowire is approached. The mechanism of the red shift is discussed on the basis of the tensile strain. From the red shift of the phonon peak position, the strain at different regions on the nanowire is estimated. Stress in the bent nanowire is also investigated using photoluminescence (PL) spectroscopy. Results of both Raman and PL study confirm that the bent nanowire is under tensile strain. Copyright © 2011 John Wiley & Sons, Ltd.     

Influence of Solution Acidity on Structure of Actinocin Derivatives and Their Affinity to DNA Studied as a Function of pH by Raman Spectroscopy

An important problem of molecular biophysics is the influence of pH and ionic strength of a solution on chemical structures and charge of biologically active substances. By means of pH titration and Raman spectroscopy methods, the influence of solution acidity on structural changes of actinocin derivatives was investigated, analogues to antitumor antibiotic actinomycin D. It has been shown that these ligands have different values of cation charges in neutral solutions. From analysis of Raman spectra, it was concluded that protonation of nitrogen atom and amino group of the phenoxazone ring starts only at pH < 3.5. It was shown that protonation of actinocin derivative with two amide groups (diaminoactinocin) occurred in two steps. Corresponding protonation constants for diaminoactinocin (log k ₁ = 6.9 ± 0.5 and log k ₂ = 5.3 ± 0.1) and for partially protonated actinocin derivative with three methylene groups in the side chains (log k = 5.3 ± 0.1) were obtained. Characteristic frequencies of Raman spectra for the basic functional C=O, C2–NH₂, C–C=C, and –N=C groups of phenoxazone chromophore of actinocin derivatives in protonated and nonprotonated states were determined. The different affinities of binding of variously charged ligands to DNA have also been demonstrated.     

In situ diagnostics of catalytic materials using tunable confocal Raman spectroscopy

A new Raman spectroscopic setup for in situ characterization of catalytic materials based on a tunable laser system and a confocal Raman microscope is described. The laser excitation wavelength is variable over a broad range from deep ultraviolet (UV) to near‐infrared allowing for targeted use of Raman diagnostics for catalyst characterization. By utilization of resonance effects, the sensitivity of the method can be strongly increased. The potential of the setup is illustrated by new in situ Raman results on dispersed vanadium oxide catalysts obtained at 217.5 and 280 nm UV laser excitation. Copyright © 2013 John Wiley & Sons, Ltd.     

Raman Spectroscopic Study of the Molybdate Mineral Szenicsite and Comparison with Other Paragenetically Related Molybdate Minerals

Abstract

The molybdate‐bearing mineral szenicsite, Cu₃(MoO₄)(OH)₄, has been studied by Raman and infrared spectroscopy. A comparison of the Raman spectra is made with those of the closely related molybdate‐bearing minerals, wulfenite, powellite, lindgrenite, and iriginite, which show common paragenesis. The Raman spectrum of szenicsite displays an intense, sharp band at 898 cm^?1, attributed to the ν₁ symmetric stretching vibration of the MoO₄ units. The position of this particular band may be compared with the values of 871 cm^?1 for wulfenite and scheelite and 879 cm^?1 for powellite. Two Raman bands are observed at 827 and 801 cm^?1 for szenicsite, which are assigned to the ν₃(E _g ) vibrational mode of the molybdate anion. The two MO₄ ν₂ modes are observed at 349 (B _g ) and 308 cm^?1 (A _g ). The Raman band at 408 cm^?1 for szenicsite is assigned to the ν₄(E _g ) band. The Raman spectra are assigned according to a factor group analysis and are related to the structure of the minerals. The various minerals mentioned have characteristically different Raman spectra.     

Spectroscopic analysis of a dye–mineral composite–a Raman and FT‐IR study

In this investigation, we address the question of how organic thioindigo binds to inorganic palygorskite to form a pigment similar to Maya Blue. We also address how such binding, if it occurs, might be affected by varying the proportion of dye relative to that of the mineral, and by varying the length of heating time used in preparation of the pigment. In addition to samples of palygorskite and thioindigo both alone, four synthetic pigment samples were prepared; two samples of 8 wt.% dye, one heated at 170 °C for 3 h and one at 170 °C for 9 h, and two samples of 16 wt.% dye, one heated at 170 °C for 3 h and one at 170 °C for 9 h. All samples were examined using Fourier transform‐infrared (FT‐IR) and FT‐Raman spectroscopy. For the pigment samples, FT‐IR peaks at 1627 cm⁻¹ are attributed to a downshifted CO stretching mode of thioindigo due to dye–clay interaction. This interpretation is corroborated by FT‐Raman CO peaks with 14 cm⁻¹ shifts to lower wavenumber for the pigment relative to thioindigo alone. Additional Raman scattering between 550 cm⁻¹ and 650 cm⁻¹ also suggests dye–clay interaction through metal–oxygen bonding. We are thus led to the possibility of mostly hydrogen bonding between silanol and carbonyl at lower dye concentration, with a predominance of metal–oxygen bonding at higher dye concentration. Copyright © 2008 John Wiley & Sons, Ltd.     

Raman spectroscopic characterization of cinnabarin produced by the fungus Pycnoporus sanguineus (Fr.) Murr.

Raman spectroscopy with 1064 nm laser excitation is used here to identify the chemical composition of the extracts obtained from Pycnoporus sanguineus fungus, in comparison with the data produced from the red fungus itself. Polar and non‐polar solvents were used to separate cinnabarin and ergosterol, respectively, the main components of each extract. The Raman spectra of the extracts are dominated by specific vibrational modes that can be related to these components; in the case of ergosterol the main bands are those assignable to CH stretching and deformation along with bands related to the aryl skeletal rings. The cinnabarin fraction, on the other hand, gives a Raman spectrum where the most important bands are those related to NH₂ bending (1510 cm⁻¹) and C quinonoid stretching (1647 cm⁻¹) modes. The Raman spectrum obtained directly from the fungus shows similarity with the cinnabarin fraction, in agreement with the literature information from extracts that cinnabarin is the most significant component present in the red fungus. This result highlights the potential of Raman spectroscopic techniques for the monitoring of the fungus extraction process undertaken in small industries. Copyright © 2007 John Wiley & Sons, Ltd.