Solid State C NMR of 30-Crown-10 Ether and 30-Crown-10.4H2O

The ¹³C NMR solution spectra of 30-crown-10 ether and its tetrahydrate show only one resonance at all accessible temperatures. In contrast, the solid state ¹³C NMR spectrum of the 30-crown-10.4H₂O shows two resonances in the ratio of 4:1, separated by 1.2 ppm. In the case of 30-crown-10 itself, six resolvable ¹³C resonances in the ratio of 4:1:1:2:1:1 are observed in the solid with an overall chemical shift dispersion of 5 ppm. The remarkably different spectral behavior of these two systems in the solid state is discussed in terms of the torsional environments of the crystallographically unique carbons and the results of GIAO calculations of isotropic ¹³C shieldings for simpler model compounds. Results of dipolar dephased ¹³C CPMAS spectra indicate that 30-crown-10 does not undergo a large amplitude molecular motion, in contrast to earlier results for 18-crown-6. Only a small amount of residual intensity is found in the dipolar dephased spectrum of 30-crown-10.4H₂O, indicating that it also is relatively rigid in the solid.     

Molecular structure,experimental and theoretical 1H and 13C NMR chemical shift assignment of cyclic and acyclic α,β‐unsaturated esters

The experimental ¹H and ¹³C NMR spectra of 13 phenyl cinnamates and four 4‐methylcoumarins were investigated and their chemical shifts assigned on the basis of the two‐dimensional spectra. For the unsubstituted cinnamic acid phenyl ester, optimized molecular structures were calculated at a B3LYP/6‐311++G(d,p) level of theory. ¹H and ¹³C NMR chemical shifts were also calculated with the GIAO method at the B3LYP/6‐311 + G(2d,p) level of theory. The comparison between experimental and calculated NMR chemical shift suggests that the experimental spectra are formed from the superposition spectra of the two lowest energy conformers of the compound in solution. The most stable s‐cis configuration found in our studies is also the conformation adopted for a related phenyl cinnamate in solid state. The experimental results were analyzed in terms of the substituent effects. Copyright © 2013 John Wiley & Sons, Ltd.     

Spectroscopic (FT‐IR,FT‐Raman,UV, 1H,and 13C NMR) and theoretical studies of m‐anisic acid and lithium,sodium, potassium,rubidium, and caesium m‐anisates

In order to understand the nature of the interactions of biologically important ligands, it is necessary to carry out the physico‐chemical studies of these compounds with their biological targets (e.g., receptors in the cell or important cell components). Results of this study make it possible to predict some properties of a molecule, such as its reactivity, durability of complex compounds, and kinship to enzymes. In this paper the effect of alkali metal cations (Li, Na, K, Rb, and Cs) on the electronic structure of m‐methoxybenzoic acid (m‐anisic acid) was studied. The experimental IR (in solid state and solution), Raman, UV (in solid state and solution), ¹H, and ¹³C NMR spectra of m‐methoxybenzoic acid, and its salts were registered, assigned, and analyzed. Some of the obtained results were compared with published data for o‐anisic acid and o‐anisates. The structures of anisic acid and Li, Na, and K m‐anisates were optimized at the B3LYP/6‐311++G** level. The IR, ¹H, and ¹³C NMR spectra and NPA, ChelpG, and MK atomic charges were calculated. The change of metal along with the series: Li → Na → K → Rb → Cs caused: (1) the change in the electronic charge distribution in anisate anion that is seen via the occurrence of the systematic shifts of several bands in the experimental and theoretical IR and Raman spectra of anisates; (2) systematic ¹H and ¹³C NMR chemical shifts; (3) hypsochromic shifts in UV spectra of salts as compared to ligands. Copyright © 2009 John Wiley & Sons, Ltd.     

An Overview of 195Pt Nuclear Magnetic Resonance Spectroscopy

Abstract

This brief, non‐exhaustive review describes some basic theoretical aspects of ¹⁹⁵Pt nuclear magnetic resonance spectroscopy and also the empirical approach used by the researchers in the field. The different factors which influence the chemical shifts are discussed. The couplings constants between ¹⁹⁵Pt and other isotopes, which have a spin of 1/2 (such as, ¹H and ¹³C) bring further important information on the structures of Pt compounds. Recently, ¹⁹⁵Pt‐NMR spectroscopy in the liquid state has been used successfully in many research fields, e.g., the determination of enantiomeric composition and absolute configuration, in the area of biosensors and biomarkers, in cluster chemistry, in cancer research and in kinetic studies. While liquid‐state ¹⁹⁵Pt‐NMR spectroscopy encompasses a wide range of areas, the parallel solid‐state technique has only been employed over the past few years, mainly in studies of heterogeneous catalysis and is more industrially oriented.     

Crystal structure and 13C CP/MAS NMR of the p-xylene clathrate of Dianin's compound

Single-crystal X-ray diffraction and ¹³C solid state NMR spectroscopy were used to characterize the structure and dynamics of the p-xylene clathrate of Dianin's compound. In contrast to conclusions obtained from single-crystal ²H NMR and modelling, the diffraction results suggest there is a single (symmetry disordered) guest site without any significant distortion of the host framework. A single xylene guest statistically disordered over six overlapping equivalent positions can account for the ¹³C NMR spectrum at room temperature. The high crystal-lographic symmetry arises from space averaging. At high temperatures the ¹³C spectrum is consistent with the onset of dynamic processes that result in higher effective symmetry.     

Determination of Multiple φ-Torsion Angles in Proteins by Selective and Extensive C Labeling and Two-Dimensional Solid-State NMR

We describe an approach to efficiently determine the backbone conformation of solid proteins that utilizes selective and extensive ¹³C labeling in conjunction with two-dimensional magic-angle-spinning NMR. The selective ¹³C labeling approach aims to reduce line broadening and other multispin complications encountered in solid-state NMR of uniformly labeled proteins while still enhancing the sensitivity of NMR spectra. It is achieved by using specifically labeled glucose or glycerol as the sole carbon source in the protein expression medium. For amino acids synthesized in the linear part of the biosynthetic pathways, [1-¹³C]glucose preferentially labels the ends of the side chains, while [2-¹³C]glycerol labels the C^α of these residues. Amino acids produced from the citric-acid cycle are labeled in a more complex manner. Information on the secondary structure of such a labeled protein was obtained by measuring multiple backbone torsion angles φ simultaneously, using an isotropic–anisotropic 2D correlation technique, the HNCH experiment. Initial experiments for resonance assignment of a selectively ¹³C labeled protein were performed using ¹⁵N–¹³C 2D correlation spectroscopy. From the time dependence of the ¹⁵N–¹³C dipolar coherence transfer, both intraresidue and interresidue connectivities can be observed, thus yielding partial sequential assignment. We demonstrate the selective ¹³C labeling and these 2D NMR experiments on a 8.5-kDa model protein, ubiquitin. This isotope-edited NMR approach is expected to facilitate the structure determination of proteins in the solid state.     

Double proton transfer in crystals of 1,3,4,6,7,8‐hexahydro‐2H‐pyrimido[1,2‐a] pyrimidine (hppH): 13C and 15N CPMAS NMR study of (hppH)2

In this paper, we report an example of intermolecular solid‐state proton transfer in the bicyclic guanidine, hppH. A combination of X‐ray crystallography, CPMAS NMR (¹³C and ¹⁵N) and theoretical calculations allows us to determine that a double proton transfer takes place in the (hppH)₂ dimer with an activation energy of about 50 kJ mol^?1. According to the B3LYP/6‐311++G(d,p) calculations, the double proton transfer occurs non‐symmetrically through a zwitterion. Copyright © 2009 John Wiley & Sons, Ltd.     

Structural role of polyethylene glycol in the formation of anatase nanocrystalline titania at low temperature

Anatase nanocrystalline TiO₂ thin films were obtained by a sol–gel dip‐coating method, in which the nanocrystallization is effected by a simple hot water treatment of the deposited films at temperatures below 90 °C under atmospheric pressure for 1 h. The dip‐coating sol was prepared by reacting titanium tetra‐n‐butoxide [Ti(OⁿBu)₄] with polyethylene glycol (PEG) in ethanol. Films obtained from a sol that do not contain PEG show no sign of crystallization, demonstrating the importance of PEG in the crystallization process. Raman studies of reaction dynamics show that PEG undergoes a nucleophilic substitution reaction replacing butoxy groups in Ti(OⁿBu)₄. Stoichiometric reactions of Ti(OⁿBu)₄ with PEG in polar and nonpolar solvents were performed, and they yielded different titanium–PEG hybrid polymers, which were isolated and characterized by various spectroscopic techniques such as IR, Raman, solid‐state NMR and MALDI‐TOF‐MS. NMR studies evidenced the location and the way in which PEG is bonded with titanium atoms in the titanium–PEG hybrid polymers. On the basis of these studies, we have proposed structures for these polymers. It is demonstrated that the structure of the obtained polymers plays an important role in the formation of anatase TiO₂ nanoparticles in hot water at temperatures below 90 °C under atmospheric pressure. Copyright © 2009 John Wiley & Sons, Ltd.     

Investigation of the Chemical Differences between Native and Bypass Coronary Artery Plaques from the Same Heart Using Cross Polarization Magic Angle Spinning Nuclear Magnetic Resonance (CP/MAS-NMR)

The plaque deposits in bypass arteries and native arteries from the same heart have been studied using solid state cross polarization nuclear magnetic resonance (CP/MAS NMR). Both ¹³C and ³¹P signals were observed. The samples are of interest because plaque in native arteries may have deposited during the lifetime of the patient. However, plaque in the bypass occurred since bypass surgery. It has been observed that the mature plaque in native arteries was more calcified than that in bypass arteries, especially if the latter had not matured to become significant in size. Results showed that the concentrations of carboxylate carbons present in cholesterol esters were similar in native and bypass arteries. However, the areas of the ¹³C peaks of the carboxylate compared to the sum of areas of all other ¹³C arteries indicated that the carboxylate was attached to five or six other carbons. From this we can calculate that the carboxylate to other carbon ratio in the remainder must be 1:4 or 1:3. This indicates large quantities of other organic compounds in the deposits. Studies of ³¹P showed that phosphorus existed primarily as hydroxyapatite in the crystalline native plaque. However, a large proportion existed as organic phosphorus in the bypass plaque. In addition, we studied the interactions of calcium with homocysteine and cholesterol. Calcium-homocysteine and cholesterol-homocysteine precipitates were characterized using ¹³C solid state NMR. Results showed that calcium appeared to interact with sulphur in the homocysteine which seemed to form dimers and polymers.     

Solid state C NMR analysis of human gallstones from cancer and benign gall bladder diseases

Natural abundance ¹³C cross polarized (CP) magic angle spinning (MAS) nuclear magnetic resonance (NMR) analysis of human gall bladder stones collected from patients suffering from malignant and benign gall bladder disease was carried out which revealed different polymorphs of cholesterol in these stones. All gall bladder stones in present study had cholesterol as their main constituent. ¹³C CP-MAS NMR analysis revealed three forms of cholesterol molecules in these stones, which are anhydrous form, monohydrate crystalline with amorphous form and monohydrate crystalline form. Our study revealed that stones collected from patients associated with chronic cholecystitis (CC) disease have mostly different polymorph of cholesterol than stones collected from patients associated with gall bladder cancer (GBC). Such study will be helpful in understanding the mechanism of formation of gallstones which are associated with different gall bladder diseases. This is the first study by solid state NMR revealing different crystal polymorphism of cholesterol in human gallstones, extending the applicability of ¹³C CP-MAS NMR technique for the routine study of gallstones.     

Structural Assignment of Isomeric S‐ and S,N‐1‐Alkoxycarbonylalkylated 6‐Amino‐2‐thiouracil Derivatives by Means of 1H and 13C NMR Spectroscopy

Abstract

The structures of new isomeric 2‐alkoxycarbonylalkylthio‐ and 2‐alkoxy‐ carbonylalkylthio‐1‐alkoxycarbonylalkyl‐6‐aminouracils (1–21) have been established on the basis of the ¹H NMR and ¹³C NMR spectroscopic data. The ¹H NMR and ¹³C NMR spectra of 1–21 have been fully assigned by a combination of two‐dimensional experiments [heteronuclear multiple quantum coherence (HMQC) and heteronuclear multiple bond correlation (HMBC)]. The ¹³C NMR spectra have been shown to be able to differentiate between isomers.     

31P nmr study of I–IV group polycrystalline phosphates

Polycrystalline phosphates of group I–IV elements have been studied using solid state ³¹P NMR. The relationship between the spectral parameters (the principal components of the chemical shielding tensor and obtained from MAS values of the isotropic shifts of ³¹P) and the environment of the phosphorus atoms in these compounds has been considered. The shape of the lines in stationary ³¹P NMR spectra reflects the near neighbour environment of a phosphorus atom and the degree of distortion of the PO₄ tetrahedron. The type of cation, as well as the presence of the water of crystallization in the structure affect considerably an isotropic shift of ³¹P in phosphates. The high sensitivity of the solid state ³¹P NMR to even slight variations in the structure of the phosphate anions is shown.     

Structural and 14N EFG Information on Solid Imidazole by 13C CP/MAS NMR Data

Residual dipolar coupling between carbons and ¹⁴N nuclei in the ¹³C CPMAS NMR spectrum of solid imidazole is studied. Calculations of expected splittings with a previously reported equation leads to the complete assignment of the solid state carbon chemical shifts. Additionally, information is provided on the location of ¹⁴N electric field gradient axes at the N-H site.     

The Effect of pH on solid-state 13C NMR spectra of histidine

High-resolution solid-state ¹³C NMR spectra of histidine powder samples prepared from solutions at several pH values near the pK_a of the imidazole group are presented. These spectra demonstrate several effects due to the titration of the imidazole group. The chemical shifts for all of the carbon sites change upon titration. They are in “slow exchange” in the solid state in contrast to the “fast exchange” behavior seen in solution. Changes in the quadrupole interactions in the ¹⁴N sites occur upon titration and are observed by their effects on the resonance lineshapes of the ¹³C sites to which they are bonded.     

Substituent effect investigation of 3‐(2, 4‐dichlorophenyl)‐1‐(4′‐X‐phenyl)‐2‐propen‐1‐one. Part 1. Correlation analysis of 13C NMR chemical shifts

A series of substituted chlorinated chalcones namely, 3‐(2,4‐dichlorophenyl)‐1‐(4′‐X‐phenyl)‐2‐propen‐1‐one, have been synthesized, X being H, NH₂, OMe, Me, F, Cl, CO₂Et, CN, and NO₂. Dual substituent parameter (DSP) models of ¹³C NMR chemical shift (CS) have revealed that π‐polarization concept could be utilized to explain the reverse field effect at CO, the enhanced substituent field effect at CO, C‐2, and C‐5, and the decreased sensitivity of substituent field effect at C‐6. Chlorine atoms dipole direction at the benzylidene ring either enhances or reduces substituent effect depending on how they couple with the substituent dipole at the probe site. The correlation of ¹³C NMR CS of C‐2, C‐5, and C‐6 with σ and σ indicates that chlorine atoms in the benzylidine ring deplete the ring from charges. Both MSP of Hammett and DSP of Taft ¹³C NMR CS models give similar trends of substituent effects at C‐2, C‐5, and C‐6. However, the former fail to give a significant correlation for CO and C‐6 ¹³C NMR CS. MSP of σ_q and DSP of Taft and Reynolds models significantly correlated ¹³C NMR CS of C_β. MSP of σ_q fails to correlate C‐1′ ¹³C NMR CS. Investigation of ¹³C NMR CS of non‐chlorinated chalcones series: 3‐phenyl‐1‐(4′‐X‐phenyl)‐2‐propen‐1‐one has revealed similar trends of substituent effects as in the chlorinated chalcones series for C‐1′, CO, C_α, and C_β. In contrast, the substituent effect of the non‐chlorinated chalcone series at C‐2, C‐5, and C‐6 did not correlate with any substituent constant. Copyright © 2010 John Wiley & Sons, Ltd.     

Irbesartan: FTIR and Raman spectra. Density functional study on vibrational and NMR spectra

Arterial hypertension is a very common disease, which is treated with different medications such as Irbesartan. This compound is a nonpeptide antagonist of the receptor of the enzyme angiotensin II. The infrared and Raman spectra of this compound were recorded and discussed assisted with density functional theory using the 6‐31G** basis set and animated pictures. Irbesartan exists in two tautomeric forms which can be isolated in the solid state. The vibrational study has been recorded using a mixture of both forms. ¹³C, ¹⁵N and ¹H NMR theoretical studies have been performed and compared with previously reported experimental data. Theoretical calculations allowed the determination of the main features of the A and B tautomers of Irbesartan both in the vibrational studies and in the NMR spectroscopy. Copyright © 2009 John Wiley & Sons, Ltd.     

GIAO Calculations of Chemical Shifts in Ethene‐1,1,2,2‐tetrayltetramethylene tetrathiocyanate

Geometric optimization and gauge including atomic orbital (GIAO). ¹H and ¹³C NMR chemical shift calculations with Hartree–Fock (HF) method and density functional method (B3LYP), using the 6‐31G(d) and 6‐31+G(d) basis sets, are proposed as a tool to be applied in the structural characterization of ethene‐1,1,2,2‐tetrayltetramethylene tetrathiocyanate, thus providing useful support in the interpretation of experimental NMR data. Parameters related to linear correlation plot of computed versus experimental ¹³C NMR chemical shifts in DMSO‐d₆ are provided.     

Complexability of o-bisguanidinobenzenes with arsenic and phosphoric acids in solution and solid states, and the potential use of their immobilized derivatives as solid base ligands for metal salts and arsenic acid

The role of o-bisguanidinobenzenes (BGBs) as new Brønsted base ligands for arsenic and phosphoric acids was examined. In solution state, complexation was evaluated by Job’s plot in ¹H NMR experiment, indicating a 1:1 complex formation, whereas in solid state crystalline structures of complexes obtained were addressed by X-ray crystallographic analysis and/or solid state ¹³C NMR experiment, in which 1:2 complexes between the BGB and the acid components were normally formed. Based on these results, Merrifield and Hypogel^® resin-anchored BGBs were designed and prepared as the corresponding polymer-supported host ligands. Evaluation of their coordination ability with metal salts (ZnCl₂ and CoCl₂) and arsenic acid in aqueous media by ICP-MS showed that the latter Hypogel^® resin-anchored BGBs acted as effective immobilized base ligands.     

Anion effect on the conformational equilibrium of sulfamide and its N,N′‐diindolyl derivative: Insights on anion transportation

The relatively high acidity of the sulfamide hydrogens suggests a potential for the development of sulfamide derivatives as novel anion receptors. The interactions of sulfamide with F^?, Cl^?, CH₃COO^?, and H₂PO₄^? anions were spectroscopically (¹H and ¹⁹F NMR) and theoretically (density functional theory) analyzed, and the complexation through hydrogen bonds was confirmed by changes in the NMR signals and theoretical calculations. The replacement of 2 sulfamide hydrogens with indolyl groups yields the N,N′‐diindolylsulfamide ( DIS , N‐1H‐indol‐4‐yl‐N′‐1H‐indol‐7‐ylsulfuric diamide), whose bond rotations allow the interaction of 4 H(N) atoms with anions. The conformational preferences of DIS change upon the presence of anions, but they are practically insensitive to the anion type. According to the quantum theory of atoms in molecules, natural bond orbital analysis, and NMR chemical shifts, as well as to a thermodynamic cycle, the complex with fluoride is the most stable, followed by the oxoanion‐derived models.     

Study of synthetic diamonds by dynamic nuclear polarization-enhanced13C nuclear magnetic resonance spectroscopy

Four I_b-type synthetic diamond crystals were studied by dynamic nuclear polarization (DNP)-enhanced high resolution solid state¹³C nuclear magnetic resonance (NMR) spectroscopy. The home built DNP magic-angle-spinning (MAS) NMR spectrometer operates at a field strength of 1.9 T and the highest DNP enhancement factor of synthetic diamonds came near to 10³. Comparing with I_b-type natural diamonds, the¹³C NMR linewidths of synthetic diamonds in static spectra are broader. The¹³C spin-lattice relaxation time and DNP polarization time of synthetic diamond are shorter than those of I_b-type natural diamond. From the hyperfine structure of the DNP enhancement curve, four kinds of nitrogen-centred free radicals could be identified in synthetic diamond.