Morphology‐controllable synthesis of ZnO nano‐/micro‐ structures by a solvothermal process in ethanol solution

Flower‐like ZnO nanostructures assembled by nanorods with bimodal size distribution have been synthesized by a solvothermal process in NaOH‐Et system. Various effects of the solvothermal parameters and assistant additives on the morphologies of ZnO nanostructures have been investigated. The directing effect of chloride ions have been observed in the formation of highly symmetrical 3D ZnO nanostructures. A possible mechanism has been proposed to explain the formation of ZnO nanoflowers in NaOH‐Et system. A strong near‐UV emission band centered at around 396 nm is observed in the photoluminescence spectrum of flower‐like ZnO nanostructures, indicating of their high crystal quality.     

Well‐defined Sb2S3 nanostructures: citric acid‐assisted synthesis,electrochemical hydrogen storage properties

Well‐defined (three‐dimensional) 3‐D dandelion‐like Sb₂S₃ nanostructures consisted of numerous nanorods have been achieved via a facile citric acid‐assisted solvothermal process. The as‐prepared products were characterized by X‐ray diffraction (XRD), field‐emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM) and high‐resolution TEM (HRTEM), respectively. The influence factors of the formation of the hierarchical Sb₂S₃ nanostructures are discussed in details based on FESEM characterizations. By simply controlling the quantity of citric acid, the nucleation and growth process can be readily tuned, which brings the different morphologies and nanostructures of the final products. On the basis of a series of contrastive experiments, the aggregation‐based process and anisotropic growth mechanism are reasonably proposed to understand the formation mechanism of Sb₂S₃ hierarchical architectures with distinctive morphologies including nanorods, and dandelion‐like nanostructures. Charge‐discharge curves of the obtained Sb₂S₃ nanostructures were measured to investigate their electrochemical hydrogen storage behaviors. It revealed that the morphology played a key role on the hydrogen storage capacity of Sb₂S₃ nanostructure. The dandelion‐like Sb₂S₃ nanostructures exhibited higher hydrogen storage capacity (108 mAh g⁻¹) than that of Sb₂S₃ nanorods (95 mAh g⁻¹) at room temperature.     

Characterization of ZnO nanorods grown on Si substrates coated with NiCl2

ZnO nanorods were synthesized on NiCl₂‐coated Si substrates via a chemical vapor deposition (CVD) process. The as‐fabricated nanorods with diameters ranging from 150 nm to 200 nm and lengths up to several tens of micrometers grew preferentially arranged along [0001] direction, perpendicular to the (0002) plane. The clear lattice fringes in HRTEM image demonstrated the growth of good quality hexagonal single‐crystalline ZnO. Room temperature photoluminescence (PL) spectra illustrated that the ZnO nanorods exhibit strong UV emission peak and green emission peak, peak centers located at 388 nm and 506 nm. A possible growth mechanism based on the study of our X‐ray diffraction (XRD), electron microscopy and PL spectroscopy was proposed, emphasizing the effect of NiCl₂ solution (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Preparation of dendritic‐like CdS by hydrothermal method and its photocatalytic performance

In this article, dendritic‐like CdS has been prepared by a hydrothermal method using thiourea as the sulfur source, and the effects of experimental conditions on the morphologies of CdS have been investigated. The performances of CdS have been analyzed by X‐ray diffraction (XRD), field emission scanning electron microscopy (FESEM), and the fluorescence and photodegradation properties of CdS have also been investigated. The XRD result indicates that the dendritic‐like CdS are of hexagonal phase and they are highly crystallized. Also, the FESEM results show that the ratio of raw material affects the yield of CdS, the reaction time affects the morphology of CdS. The best morphology of CdS is dendritic structures and the length is about 6 μm. The fluorescence spectrum shows three peaks at 470 nm, 513 nm and 547 nm, which indicates that the dendritic‐like CdS mainly emits green and blue fluorescence. Moreover, the dendritic‐like CdS exhibits good photocatalytic activity and its photodegradation rate to methylene blue can reach 92%. The growth mechanism for the formation of CdS with dendritic structure is also described.     

Microemulsion synthesis and characterization of aluminum doped ZnO nanorods

Aluminium doped ZnO (AZO) nanorods were synthesized by microemulsion method with different types of surfactants. Scanning electron microscopy observations show that the ZnO nanorods have diameters around about 80 nm and lengths up to several micrometers. The room temperature photoluminescence (PL) spectrum of AZO nanorods exhibited a sharp and strong ultraviolet bandgap at 383 nm and a relatively weaker emission associated with the defect level. AZO nanorods synthesized with sodium benzene sulfonate (SBS) surfactant showed lower resistivity than aluminum doped ZnO nanorods synthesized with dodecyl benzene sulfonic acid sodium salt (DBS) surfactant. Resistivity of AZO nanorods synthesized with SBS surfactant showed 2.8×10³ Ωcm. (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Optical properties of flower‐like CdS prepared by a hydrothermal method with SDBS as surfactant

In this article, flower‐like CdS structures have been prepared by a hydrothermal method with SDBS as surfactant. The influences of different experimental conditions on the morphologies, UV‐Vis and fluorescence properties of CdS have been investigated. The performances of CdS have been analyzed by X‐ray diffraction (XRD), field emission scanning electron microscopy (FESEM), ultraviolet‐visible (UV–Vis) and room‐temperature photoluminescence (PL). The XRD result indicates that the flower‐like CdS structures are of hexagonal phase. The FESEM results indicate that the main role of SDBS is to make the CdS crystals assemble together to form the flower‐like structures. The UV–Vis results show CdS has a strong absorption in the ultraviolet region and visible‐light region. The PL results show CdS has two emission peaks, respectively at 461 nm and 553 nm. The growth mechanism for the formation of flower‐like CdS structures is also described.     

Structural and optical response of 2‐Mercaptoethonal capped CdS nanocrystals to Fe3+ ions

Cadmium sulfide (CdS) semiconductor nanocrystals (NCs) doped with Fe³⁺ have been synthesized via a solution‐based method utilizing dopant concentrations of (0–5%) and employing 2‐mercaptoehonal as a capping agent. X‐ray diffraction (XRD) results showed that the undoped CdS NCs are in mixed phase of cubic and hexagonal, where as the doped CdS NCs are in hexagonal phase. The crystallite size was increased from ∼1.2 nm to ∼2 nm. Diffuse reflectance spectroscopy studies (DRS) reveals that the band gap energy was decreased with Fe doping and it lies in the range of 2.58 ‐ 2.88 eV. Photoluminescence (PL) spectra of undoped CdS NCs show a strong green emission peak centered at 530 nm and a weak red emission shoulder positioned at 580 nm. After doping all the luminescence intensity was highly quenched and the green emission peak was shifted to orange region (580 nm), but the position of weak red emission shoulder was unaltered with doping. FTIR studies revealed that the NCs were sterically stabilized by 2‐mercaptoethanol. (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Characterization and optical properties of ZnS nanorods branched out from ZnS film on Zn foil

Complex nanomaterial‐film‐metal substrate architectures, which are composed of ZnS nanorods, island‐like ZnS film and Zn foil, have been formed via a simple vapor deposition route. The growth of the complex nanostructures is initiated by the preferred formation of ZnS film, and ZnS nanorods branches out from ZnS film flows a liquid‐phase epitaxial growth mode. The ZnS nanorod is switched to an angle, which may be attributed to the sudden change of vapor pressure and temperature reduction by the end of vapor deposition process. The room‐temperature photoluminescence spectrum shows that complex ZnS nanostructures have a strong blue emission band centered at about 423 nm and a weak broad green emission band centered at about 515 nm. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Hydrothermal synthesis of anatase flower‐like nanostructures for photocatalytic degradation of dye

Flower‐like hierarchical nanostructures of titanium dioxide (TiO₂) have been synthesized in large scale by a facile and controlled hydrothermal and after annealing process. The morphologies of flower‐like hierarchical nanostructures are formed by self‐organization of several tens of radially distributed thin flakes with a thickness of several nanometers holding a larger surface area. The materials are characterized by Scanning electron microscopy (SEM), transmission electron microscopy (TEM), and X‐ray diffraction (XRD). The ultraviolet photocatalytic degradation of R6G dyes has been studied over this flower‐like hierarchical nanostructures and the activity is compared with that of commercial P25 TiO₂ under same conditions. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

One‐step green synthesis by organic molten salt method and optical properties of CdS nanosheets

Cadmium sulfide (CdS) nanosheets were synthesized by an environment friendly, “green” organic molten salt (OMS) method at 220 °C. The as‐synthesized products were characterized by X‐ray diffraction (XRD), scanning electron microscopy (SEM), Transmission electron microscopy (TEM) and energy dispersive spectroscopy (EDS), respectively. The XRD results reveal that the as‐synthesized CdS nanosheets are of the hexagonal wurtzite structure and the CdS nanosheets grow along the c‐axis. The SEM results indicate that the diameters and thickness of the CdS nanosheets are about 20–40 nm and 5–10 nm, respectively. The optical properties of the CdS nanosheets were investigated by ultraviolet–visible (UV‐Vis) spectroscopy and photoluminescence (PL) spectroscopy. The ultraviolet–visible spectrum exhibits two excitonic peaks with a step‐like absorption and the photoluminescence spectrum shows a green emission peak centered at around 524 nm. A possible growth mechanism of CdS nanosheets was discussed.     

Surface‐morphology evolution of ZnO nanostructures grown by hydrothermal method

Surface‐morphology evolution of ZnO nanocrystals has been observed by the hydrothermal process. The effects of stirring time and ammonia content on the morphology evolution have been discussed, respectively. Extension of stirring time of the precursor results in morphology transformation from star‐like to wire‐like ZnO nanocrystals. ZnO nuclei aggregation and uniform Zn(OH)₂ precipitation can readily explain these two morphologies, respectively. By increasing the ammonia content in the solution, the morphology of ZnO crystals is transformed from an irregular shape to hexagon sheets to nanorods, and the side length of ZnO crystals is decreased accordingly. Hollow structures are realized at the subsequent solution aging process. Variation of zinc ammonic complex and minimum surface energy can well explain the morphology evolution of ZnO nanostructures.     

Structural,optical and photoconductive properties of electron beam evaporated CdSxSe1‐x films

CdS_xSe_1‐x films were deposited by the electron beam evaporation technique on glass substrates at different temperatures in the range 30 – 300 °C using the laboratory synthesized powders of different composition. The films exhibited hexagonal structure and the lattice parameters shifted from CdSe to CdS side as the composition changed from CdSe to CdS side. The bandgap of the films increased from 1.68 to 2.41 eV as the concentration of CdS increased. The root‐mean‐roughness (RMS) values are 3.4, 2.6, 1.2 and 0.6 nm as the composition of the films shifted towards CdS side. The conductivity varies from 30 Ωcm^‐1 to 480 Ωcm^‐1 as the ‘x’ value increases from 0 to 1. The films exhibited photosensitivity. The PL spectrum shifts towards lower energies with decreasing x, due to the decrease of the fundamental gap with Se composition. (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Controlled growth of ZnO torch‐like nanostructure arrays

Single‐crystal ZnO torch‐like nanostructure arrays were synthesized using a simple two‐step pressure controlled thermal evaporation method without any catalyst. The nanostructures had a hierarchical morphology, with well‐hexagonal faceted holders and needle‐like flames on them. The diameter of each single flame was about 20–40nm at the base and 10nm at the tip. Both the holders and flames were found to grow along the [0001] direction. The morphology of the structures could be effectively controlled by varying the growth temperature and vacuum pressure. The experimental results and analysis provided easy strategies to control the morphology of nanostructures and also enhanced the understanding of the growth mechanism. (© 2008 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Synthesis of ZnO nanorods by the thermal reduction process of a mixture of ZnO and Al powder

Single‐crystalline Zinc oxide (ZnO) nanorods were firstly synthesized on gold‐coated Si substrate via a simple thermal reduction method from the mixture of ZnO and Al powder. The growth process was carried out in a quartz tube at different temperature (550‐700 °C) and at different oxygen partial pressure. Their structure properties were investigated by X‐ray diffraction (XRD), scanning electron microscope (SEM), X‐ray photoelectron spectroscopy (XPS) and transmission electron microscopy (TEM). The length of the as‐prepared ZnO nanorods was up to several micrometers and their diameters were about 130 nm. The X‐ray diffraction patterns, transmission electron microscopic images, and selective area electron diffraction patterns indicate that the one‐dimensional ZnO nanorods are a pure Single‐crystal and preferentially oriented in the [0001] direction. The reaction mechanism of ZnO nanorods was proposed on the basis of experimental data. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

CdS纳米棒的水热法制备及形成机理研究

采用水热法以Na2S· 9H2O为硫源,Cd3O12S3·8H2O为镉源,PVP为表面活性剂,成功制备了CdS纳米棒.并利用X射线衍射(XRD)、透射电子显微镜(TEM)和相应选区电子衍射(SAED)、高分辨透射电子显微镜(HRTEM)、X射线能量色散分析谱仪(XEDS)和紫外可见(UV-vis)分光光度计等测试手段对样品的晶体结构、形貌、微观结构和光学特性等特征进行了表征分析,实验结果表明本方法所制备的CdS纳米棒为纤锌矿结构,沿[001]方向择优生长,平均直径大约为50 nm,棒宽均匀、分散性好,带隙为2.43 eV.同时也对CdS纳米棒的形成机理进行了初步探讨,提出了CdS纳米棒的生长模型,其形貌从三角形到阶梯形棒晶,最后再到完整的棒状晶体的一个定向团聚的自组装过程.     

EDTA‐assisted synthesis of rose‐like ZnO architectures

Rose‐like ZnO nanostructures were prepared by a low‐temperature solution route with assistance of ethylenediaminetetraacetic acid disodium (EDTA‐2Na). The morphology of ZnO nanostructures was found to change from nanowire arrays to rose‐ and tower‐like architectures with increasing the molar ratio of EDTA‐2Na/Zn²⁺. Also, the shape evolution of ZnO nanostructures with time was observed from flat nanosheets to wrinkled nanosheets and to rose‐like nanostructures. EDTA‐2Na as a strong complexing agent was found to play a key role in the shape evolution. Photoluminescence spectra show that the rose‐like ZnO architectures have more defects than the nanowire arrays. (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Rapid synthesis and catalytic performance of α‐Mn2O3 single‐crystal nanowires

Single‐crystal α‐Mn₂O₃ nanowires were prepared via a “self‐sacrificing template” route, simply by calcining the prepared α‐MnO₂ nanowire precursors at 550 °C for 1.5 h. XRD, TEM, SEM and HRTEM characterizations show that the as‐prepared α‐Mn₂O₃ samples are all phase pure and the nanowires have uniform diameters of approximately 15‐30 nm and lengths up to several micrometers. The catalytic performances of the prepared α‐Mn₂O₃ nanowires were studied in the degradation of coking wastewater with H₂O₂ as the oxidant, and the technological conditions were optimized by single‐factor and orthogonal experiments. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Microwave‐assistant route to hybrid semiconductor nanocrystals with quasi solution‐solid‐solid mechanism

A facile microwave‐assistant route was developed for the synthesis of hybrid nanocrystals. Colloidal hybrid nanocrystals, Ag₂S‐CdS, were prepared by using Ag₂S nanocrystals and cadmium diethyldithiocarbamate as raw materials under microwave irradiation. The fast ion conductor, Ag₂S nanocrystal, catalyzes the growth of CdS nano‐building blocks through a quasi solution‐solid‐solid mechanism. The ultraviolet‐visible absorption and photoluminescence spectra of the Ag₂S‐CdS hybrid nanocrystals were investigated. One of the main advantages for this synthesis is the efficiency of dramatically reducing overall processing time. This report provides a new route for the growth of semiconductor hybrid nanocrystals based on Ag₂S and may be extended to the preparation of other hybrid colloidal nanostructures.     

Solvothermal production of CdS nanorods using polyvinylpyrrolidone as a template

CdS nanorods were solvothermally produced using Cd(NO₃)₂ and S powder in ethylenediamine containing different amounts of polyvinylpyrrolidone (PVP). The phase with hexagonal structure was detected using X‐ray diffraction (XRD) and selected area electron diffraction (SAED). Their SAED patterns were in accordance with those of the simulations. Scanning and transmission electron microscopies (SEM and TEM) revealed the presence of CdS nanorods with their lengths influenced by different amounts of PVP. The nanorods were also characterized using high resolution TEM (HRTEM). They grew in the [001] direction normal to the (002) parallel crystallographic planes composing the nanorods. Raman spectra showed the 1LO (first harmonic) and 2LO (second harmonic) modes at the same wavenumbers although the products were produced under different conditions. (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Enhancement of the emission from TeO2 nanorods by encapsulation with ZnO

TeO₂‐core/ZnO‐shell nanorods were synthesized by a two–step process comprising thermal evaporation of Te powders and atomic layer deposition of ZnO. Scanning electron microscopy images exhibit that the core‐shell nanorods are 50 ‐ 150 nm in diameter and up to a few tens of micrometers in length, respectively. Transmission electron microscopy and X‐ray diffraction analysis revealed that the cores and shells of the core‐shell nanorods were polycrystalline simple tetragonal TeO₂ and amorphous ZnO with ZnO nanocrystallites locally, respectively. Photoluminescence measurement revealed that the TeO₂ nanorods had a weak broad violet band at approximately 430 nm. The emission band was shifted to a yellowish green region (∼540 nm) by encapsulation of the nanorods with a ZnO thin film and the yellowish green emission from the TeO₂‐core/ZnO‐shell nanorods was enhanced significantly in intensity by increasing the shell layer thickness. The highest emission was obtained for 125 ALD cycles (ZnO coating layer thickness: ∼15 nm) and its intensity was much higher than that of the emission from the uncapsulated TeO₂ nanorods. The origin of the enhancement of the emission by the encapsulation is discussed in detail. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)