Second-order optical non-linearity initiated in Li2O–Nb2O5–SiO2 and Li2O–ZnO–Nb2O5–SiO2 glasses by formation of polar and centrosymmetric nanostructures

Amorphous nanoheterogeneities of the size less than 100 Å have been formed in glasses of the Li₂O–Nb₂O₅–SiO₂ (LNS) and Li₂O–ZnO–Nb₂O₅–SiO₂ (LZNS) systems at the initial stage of phase separation and examined by transmission electron microscopy, small-angle X-ray and neutron scattering. Both LNS and LZNS nanoheterogeneous glasses exhibit second harmonic generation (SHG) even when they are characterized by fully amorphous X-ray diffraction (XRD) patterns. Chemical differentiation and ordering of glass structure during heat treatments at appropriate temperatures higher T_g lead to drastic increase of SHG efficiency of LNS glasses contrary to LZNS ones in the frame of amorphous state of samples. Following heat treatments of nanostructured glasses result in crystallization of ferroelectric LiNbO₃ and non-polar LiZnNbO₄ in the LNS and LZNS glasses, respectively. Taking into account similar polarizability of atoms in LNS and LZNS glasses, the origin of the principal difference in the second-order optical non-linearity of amorphous LNS and LZNS samples is proposed to connect predominantly with the internal structure of formed nanoheterogeneities and with their polarity. Most probably, amorphous nanoheterogeneities in glasses may be characterized with crystal-like structure of polar (LiNbO₃) phase initiating remarkable SHG efficiency or non-polar (LiZnNbO₄) phase, which do not initiate SHG activity. It gives an opportunity to vary SHG efficiency of glasses in a wide rage without remarkable change of their transparency by chemical differentiation process at the initial stage of phase separation when growth of nanoheterogeneities is ‘frozen’. At higher temperatures, LiNbO₃ crystals identified by XRD precipitate in LNS glasses initiating even more increase of SHG efficiency but visually observable transparency is impaired.     

Mixed alkali effect in physical and optical properties of Li2O–Na2O–WO3–B2O3 glasses

Glasses with composition xLi₂O-(30 ? x)Na₂O–10WO₃–60B₂O₃ (where x = 0, 5, 10, 15, 20, 25 and 30 mol%) have been prepared using the melt quenching technique. In the present work, the mixed alkali effect (MAE) has been investigated in the above glass system through density and modulated DSC studies. The density and glass transition temperature of the present gasses varies non-linearly, the exhibiting the mixed alkali effect. From the optical absorption studies, the values of direct optical band gap, indirect optical band gap energy (E_o) and Urbach energy(ΔE) have been evaluated. The values of E_o and ΔE vary non-linearly with composition parameter, showing the mixed alkali effect. The electronic polarizability of oxide ions, optical basicity and the Yamashita–Kurosawa's interaction parameter have been examined to check the correlation among them and bond character. Based on good correlation among electronic polarizability of oxide ions, optical basicity and the Yamashita–Kurosawa's interaction parameter, the present Li₂O–Na₂O–WO₃–B₂O₃ glasses were classified as normal ionic (basic) oxides.     

Effect of alumina on the structure and properties of Li2O–B2O3–P2O5 glasses

The structure of glasses within the system Li₂O–Al₂O₃–B₂O₃–P₂O₅ has been studied through ³¹P, ¹¹B and ²⁷Al Nuclear Magnetic Resonance, and the effect of Al₂O₃ substitution by B₂O₃ and P₂O₅ network formers on the structure and properties investigated for a constant Li₂O content. Multinuclear NMR results reveal that substitution of Al₂O₃ for B₂O₃ and P₂O₅ network formers in a glass with composition 50Li₂O·15B₂O₃·35P₂O₅ produces a change in boron environment from four-fold to three-fold coordination. Meanwhile aluminum can be present in four-, five- and six-fold coordinations a higher amount of Al(IV) groups is found for increasing alumina contents. The behavior of the glass transition temperature and electrical conductivity of the glasses has been interpreted as a function of the structural changes induced in the glass network when alumina is substituted for B₂O₃, P₂O₅ or both. Small additions of alumina produce a drastic increase in glass transition temperature, while it does not change for [Al₂O₃] greater than 3 mol.%. However, the electrical conductivity shows very different behavior depending on the type of substitution; it can remain constant when B₂O₃ content decreases or sharply decrease when P₂O₅ is substituted by Al₂O₃, which is attributed to a higher amount of BO₃ and phase separation.     

Crystallization behavior during cooling and glass-forming ability of Al2O3-poor Li2O–Al2O3–SiO2 melts

The influence of K₂O/(MgO + K₂O) on some melt properties, including crystallization during cooling of melts and glass-forming ability, was investigated in the Li₂O–Al₂O₃–SiO₂ system with low Al₂O₃ content. The dependence of viscosity on K₂O/(MgO + K₂O) above 1000 °C showed a monotonic decrease due to the reduction of [MgO₄] concentration and the conductivity also decreased due to the larger ion radius of K. The temperature dependence of conductivity for all melts showed an abrupt change at one temperature due to crystallization in which temperature of crystallization decreases with increase of K₂O. The crystallization behavior near liquidus temperature was studied quantitatively by calculating the crystal volume fraction from apparent viscosity value. The glass-forming ability of the melts was discussed by using data related with viscosity and crystallization. Finally, it was suggested that the melts with K₂O/(MgO + K₂O) ? 0.75 have a good glass-forming ability.     

Performance investigation of Li2O–Al2O3–4SiO2 based glass–ceramics with B2O3, Na3AlF6 and Na2O fluxes

Influence of single fluxes (10 wt.% B₂O₃), bi-component fluxes (4 wt.% B₂O₃ + 6 wt.% Na₃AlF₆), and complex fluxes (4 wt.% B₂O₃ + 4 wt.% Na₃AlF₆ + 2 wt.% Na₂O) on the thermal kinetic parameters, microstructure, flexural strength and coefficient of thermal expansion (CTE) of Li₂O–Al₂O₃–4SiO₂ (LAS) glass–ceramics was investigated through differential thermal analysis (DTA), X-ray diffraction (XRD), and scanning electron microscope (SEM). The results showed that complex fluxes could efficiently decrease transition temperature (T_g) and crystallization temperature (T_p), and accelerate the formation of needle-like β-spodumene crystals which benefit high flexural strength. The homogeneous LAS glass–ceramic (sample C₃) which has a high strength of 132.4 MPa and low CTE (100–650 °C) of 2.74 × 10^? 6/°C is obtained by doping of the initial LAS glass by complex fluxes of 4 wt.% B₂O₃, 4 wt.% Na₃AlF₆, and 2 wt.% Na₂O, nucleating at 630 °C/120 min and then crystallized at 780 °C/120 min. It is worthy of further investigation as a bonder of diamond composite material due to its outstanding prosperities.     

Influence of thermal and thermoelectric treatments on structure and electric properties of B2O3–Li2O–Nb2O5 glasses

A transparent glass with the composition 60B₂O₃–30Li₂O–10Nb₂O₅ (mol%) was prepared by the melt quenching technique. The glass was heat-treated with and without the application of an external electric field. The as-prepared sample was heat-treated (HT) at 450, 500 and 550 °C and thermoelectric treated (TET) at 500 °C. The following electric fields were used: 50 kV/m and 100 kV/m. Differential thermal analysis (DTA), X-ray diffraction (XRD), scanning electron microscopy (SEM), Raman, dc and ac conductivity, as a function of temperature, were used to investigate the glass and glass-ceramics properties. LiNbO₃ crystals were detected, by XRD, in the 500 °C HT, 550 °C HT and 500 °C TET samples. The presence of an external electric field, during the heat-treatment process, improves the formation of LiNbO₃ nanocrystals at lower temperatures. However, in the 550 °C HT and in the TET samples, Li₂B₄O₇ was also detected. The value of the σ_dc decreases with the rise of the applied field, during the heat-treatment. This behavior can indicate an increase in the fraction of the LiNbO₃ crystallites present in these glass samples. The dc and ac conduction processes show dependence on the number of the ions inserted in the glass as network modifiers.The Raman analysis suggests that the niobium ions are, probably, inserted in the glass matrix as network formers.These results reflect the decisive effect of temperature and electric field applied during the thermoelectric treatment in the structure and electric properties of glass-ceramics.     

Thermal and electric transport properties of (60−x)V2O5–xAs2O3–20Fe2O3–10CaO–10Li2O unconventional glassy system

This paper presents the results of kinematical studies of glass transition and crystallization in the unconventional glassy system (60?x)V₂O₅–xAs₂O₃–20Fe₂O₃–10CaO–10Li₂O (x = 0, 10, 20, 30, 40 mol%) using differential scanning calorimetry (DSC). The glass transition temperatures (T_g), the onset crystallization temperatures (T_c), and the peak temperatures of crystallization (T_p) were found to be dependent on the compositions and the heating rates. From the dependence on heating rates of (T_g) and (T_p) the activation energy for glass transition (E_g) and the activation energy for crystallization (E_c) are calculated. The thermal stability of (60?x)V₂O₅–xAs₂O₃–20Fe₂O₃–10CaO–10Li₂O was evaluated in term of, criteria ΔT = T_c ? T_g. All the results confirm that the thermal stability increase with increasing As₂O₃ contents. From the electric–dielectric measurements it was found that, σ_dc, σ_ac(ω) and θ_D/2 decrease with increasing As₂O₃ contents. It is also observed that the dielectric constant (ε₁(ω)) and the loss factor (tan δ) decrease with increasing As₂O₃ contents in this glass system.     

Characteristics and biocompatibility of Na2O–K2O–CaO–MgO–SrO–B2O3–P2O5 borophosphate glass fibers

A novel Na₂O–K₂O–CaO–MgO–SrO–B₂O₃–P₂O₅ borophosphate glass fiber is prepared. The thermal properties including differential thermal analysis (DTA) and viscosity measurement of the glass were presented. The tensile strength of the glass fiber is measured. The reaction of the glass fibers in the SBF solution is characterized by XRD, FTIR and SEM. XRD and FTIR indicate that the carbonate hydroxyapatite has formed rapidly on the glass. Cell attachment, spreading and proliferation on the glass are determined by MTT [3-(4,5-Dimethylthiazol-2-yl)-2,5-Diphenyltetrazolium Bromide] assay method using Human osteosarcoma MG-63 cells. The bioactivity and biocompatibility of the glass fiber make it a good potential prospect in the field of tissue engineering.     

The role of coordination and valance states of tungsten ions on some physical properties of Li2O–Al2O3–ZrO2–SiO2 glass system

A series of Li₂O–Al₂O₃–ZrO₂–SiO₂ glasses doped with different concentrations of WO₃ (0 to 5.0 mol.%) have been synthesized. Differential thermal analysis of the samples indicated increasing glass forming ability with the increasing concentration of WO₃ in the glass matrix. A variety of spectroscopic (optical absorption, IR, Raman and ESR) and dielectric properties (over a range of frequency and temperature) of these glasses have been investigated. The optical absorption and ESR spectral studies have pointed out that a part of tungsten ions do exist in W⁵⁺ state in addition to W⁶⁺ state especially in the samples containing low concentration of WO₃. The IR and Raman spectral studies have suggested that there is a decreasing degree of disorder in the glass network with increase in the concentration of WO₃. The values of dielectric parameters viz., dielectric constant, loss and ac conductivity at any frequency and temperature are observed to decrease as the concentration of WO₃ is increased. Such changes have been attributed to decrease of redox ratio or decreasing proportions of W⁵⁺ ions that act as modifiers in the glass network. The quantitative analysis of the results of ac conductivity and dielectric properties have indicated an increase in the insulating character of the glasses with the concentration of WO₃; this is attributed to the presence of tungsten ions largely in W⁶⁺ ions that participate in the glass network forming with WO₄ structural units.     

Influence of various alkali and divalent metal oxides on phase transformations in NiO-doped glasses of the Li2O–Al2O3–SiO2–TiO2 system

Regularities of phase transformations in glasses of the Li₂O–Al₂O₃–SiO₂–TiO₂ system doped with up to 2.5 mol% of alkali- and divalent metal oxides were studied by X-ray diffraction analysis, Raman scattering and optical spectroscopy. Ni(II) ions were used as spectral probes of phase transformations because Ni(II)-ions enter the inhomogeneous regions formed during the phase separation and crystallization, and their absorption spectra change with heat-treatment temperature reflecting formation of aluminotitanate amorphous regions, spinel nanosized crystals and β-quartz solid solutions, consequently.It was demonstrated that the technological additives do not change the sequence of the phases' formation but accelerate the liquid phase separation and crystallization. Addition of MgO and ZnO leads to increasing the temperature range of spinel precipitation. Addition of CaO, BaO and PbO results in increasing the light scattering of prepared glass-ceramics.In selection of the technological additives for decreasing the melting temperature of glass-ceramics for optical and photonic applications the influence of the additives on the structure and optical properties of the prepared material should be considered.     

Fabrication and ionic conductivity of amorphous Li–Al–Ti–P–O thin film

Li⁺ ion conducting Li–Al–Ti–P–O thin films were fabricated on ITO-glass substrates at various temperatures from 25 to 400 °C by RF magnetron sputtering method. When the substrate temperature is higher than 300 °C, severe destruction of ITO films were confirmed by XRD (X-ray diffraction) and the abrupt transformation of one semi-circle into two semi-circles on the impedance spectra. These as-deposited Li–Al–Ti–P–O solid state electrolyte thin films have an amorphous structure confirmed by XRD and a single semicircle on the impedance spectra. Good transmission higher than 80% in the visible light range of these electrolyte thin films can fulfill the demand of electro-chromic devices. Field emission scanning electron microscopy and atomic force microscopy showed the denser, smoother and more uniform film structure with the enhanced substrate temperature. Measurements of impedance spectra indicate that the gradual increased conductivity of these Li–Al–Ti–P–O thin films with the elevation of substrate temperature from room temperature to 300 °C is originated from the increase of the pre-exponential factor (σ₀). The largest Li-ion conductivity can come to 2.46 × 10^? 5 S cm^? 1. This inorganic solid lithium ion conductor film will have a potential application as an electrolyte layer in the field such as lithium batteries or all-solid-state EC devices.     

Magnetite nanoparticles prepared by the crystallization of Na2O–Fe2O3–B2O3–SiO2 glasses

A glass with the composition of 35Na₂O–24Fe₂O₃–20B₂O₃–20SiO₂–1ZnO (mol%) was melted, quenched, using a twin roller technique, and subsequently heat treated in the range 485–750 °C for 1–2 h. This led to the crystallization of magnetite as the sole or the major crystalline phase.Heat treatment at lower temperatures resulted in the crystallization of magnetite crystals 7–20 nm in diameter, whereas heat treatment at higher temperatures produced higher quantities of magnetite and much larger crystals. The room temperature magnetization and coercive force values were in the range of 6–57 emu g^? 1 and 0–120 Oe, respectively for the heat treated glasses.     

Raman and NMR study of bioactive Na2O–MgO–CaO–P2O5–SiO2 glasses

The results of a structural study combining NMR and Raman spectroscopy of several melt-derived glasses in the system Na₂O–MgO–CaO–P₂O₅–SiO₂ are presented. The Raman spectra show clear changes in the Si–O–Si vibrational modes (related to the bridging oxygen atoms, BO) and also verify the presence of non-bridging oxygen atoms (NBO), also named terminal oxygens. The intensity of the Si–O–NBO stretching mode depends on the cation concentration. It can be concluded from the NMR studies that the MgO-containing samples have orthophosphate units charge-compensated by Ca²⁺ and Mg²⁺. The silicate matrix also contains both types of two-valent cations and consists of Q² and Q¹ units. Similarly, the Na₂O-containing samples contain isolated orthophosphate units in a silicate matrix (Q² and Q³ units), both charge-compensated by mixed cations Ca²⁺ and Na⁺. These experimental data were compared with theoretical parameters given by the Stevels model, which is a suitable tool for understanding bioactive behavior of these glasses. Furthermore, results of the in vitro tests carried out in simulated body fluids are presented and compared with both Raman and NMR structural data.     

Formation of Co2+-doped nanocrystals in La2O3–MgO–Al2O3–SiO2 glass-ceramics

Transparent glass-ceramics were synthesized by heat-treatment of glass with a composition of 5La₂O₃–13.2MgO–28.8Al₂O₃–46SiO₂–4.5TiO₂–2.5ZrO₂–0.15CoO (LMAS) (wt.%). The activation energy of crystallization and the Avrami parameter for the LMAS glass were determined from the DTA curves at different heating rates. The most two intense bands of Raman spectrum of initial glass at ~ 810 cm^?1 and ~ 900 cm^?1 were connected with the presence of [SiO₄] and [TiO₄] tetrahedral, respectively. After heat-treated at 700 °C/10 h+820 °C/8 h, the intensity of the band for [TiO₄] tetrahedral weakened, while an intensive band at ~ 800 cm^?1 for the Ti–O bond appeared. Other bands were characteristics of high-silicate network and x(MgTi₂O₅)·y(Al₂TiO₅) polycrystals. The changes reflected phase separation after heat-treatment of the initial glass. The strong absorption band of glass-ceramics centered at 580 nm can be assigned to ⁴A₂(⁴F)→⁴T₁(⁴P) and the broad absorption band at 1100–1700 nm to ⁴A₂(⁴F)→⁴T₁(⁴F) transitions of tetrahedral coordinated Co²⁺ ion. Two broad emission bands, one was around 660 nm, the other was from 800 nm to 1050 nm, of glass-ceramics correspond to the ⁴T₁(⁴P)→⁴A₂(⁴F) and ⁴T₁(⁴P)→⁴T₂(⁴F) transitions of tetrahedral coordinated Co²⁺ ions. The absorption and emission features clearly demonstrated that Co²⁺ ions were incorporated into nanocrystals and located in tetrahedral sites.     

Spectroscopic properties of Co2+ ions in La2O3–MgO–Al2O3–SiO2 glass-ceramics

Co²⁺-doped La₂O₃–MgO–Al₂O₃–SiO₂ (LMAS) glass-ceramics was synthesized by conventional method. The microstructure of LMAS GCs heat-treated at 760 °C/12 h + 930 °C/4 h was characterized by X-ray diffraction (XRD) and transmission electron microscopy (TEM). The spectroscopic properties of Co²⁺-doped LMAS GCs were studied by absorption spectrum, excitation spectrum, and temperature dependent luminescence spectra. XRD results revealed the sizes of MgAl₂O₄ crystalline phases are about 9.1 ± 1.5 nm. The three peaks in the visible absorption band of LMAS GCs at 549 nm, 585 nm and 626 nm are connected with the transitions from ⁴A₂ level to ²A₁/²T₂(²G), ⁴T₁(⁴P) and ²E/²T₁(²G) levels, respectively, and excitations into them emit the radiation at around 666 nm. The luminescence intensity increased with temperature increasing from 10 K to 150 K, while it weakened with temperature increasing from 150 K to 350 K. These features were explained by the effects of two competing mechanisms.     

Structure and properties of NaPO3–ZnO–Nb2O5–Al2O3 glasses

In an effort to design low-melting, durable, transparent glasses, two series of glasses have been prepared in the NaPO₃–ZnO–Nb₂O₅–Al₂O₃ system with ZnO/Nb₂O₅ ratio of 2 and 1. The addition of ZnO and Nb₂O₅ to the sodium aluminophosphate matrix yields a linear increase of properties such as glass transition temperature, density, refractive index and elastic moduli. The chemical durability is also significantly, but nonlinearly, improved. The glass with the highest niobium concentration, 55NaPO₃–20ZnO–20Nb₂O₅–5Al₂O₃ was found to have a dissolution rate of 4.5 × 10^? 8 g cm^? 2 min^? 1, comparable to window glass. Structural models of the glasses were developed using Raman spectroscopy and nuclear magnetic resonance spectroscopy, and the models were correlated with the compositional dependence of the properties.