Electrical properties of PbxSn1‐xS thin films prepared by hot wall deposition method

The Pb_xSn_1‐xS (x = 0 – 0.25) thin films were prepared on glass substrates by hot wall vacuum deposition. The films were polycrystalline monophase in nature and had orthorhombic crystal structure. The thickness of the films was about 2‐3 μm. The temperature dependences of the conductivity were measured in the temperature range from 150 to 420 K. The films revealed p‐type of conductivity. The Seebeck coefficient and conductivity values of the films was in the range of α = 6 – 360 μV/K and σ = 4.8×10^‐5 – 1.5×10^‐2 Ω^‐1·cm^‐1, respectively, at room temperature depending on concentration of the lead in the films. The lead atoms created the substitution defects Pb_Sn in the crystal lattice of the Pb_xSn_1‐xS. These defects formed the donor energy levels in the band gap. The activation energy of the films increased in the range ΔE_a = 0.121 – 0.283 eV with increasing of the lead concentration. (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Crystallization of PbxSr1‐x(NO3)2 Solid Solutions from Aqueous Solutions

A series of Pb_xSr_1‐x(NO₃)₂ crystals have been grown from aqueous solutions and characterized by X‐ray powder diffraction. All diffraction data were well indexed according to the simple cubic structure. The variation of lattice constants with the concentrations of Pb²⁺ in the crystals accorded quite well to the Vegard's Law. The composition of the Sr(NO₃)₂ crystal doped with Pb²⁺ was studied by electron microprobe and it was found that Pb²⁺ was enriched in the 111 sectors. Equilibrium behavior in the Pb(NO₃)₂‐Sr(NO₃)₂‐H₂O system was analyzed by Lippmann's phase diagram and the equilibrium distribution coefficient D_Pb=133.6. This large value of D indicates that Pb²⁺ ion is preferentially distributed to the solid phase.     

Influence of the temperature and the oxygen partial pressure on the phase formation in the system Cu – Fe – O

Copper iron oxides, Cu_1‐xFe_2+xO₄ (0 ≤ x ≤ 0.5), have been synthesized by thermal oxidation of copper ‐ iron mixtures. In this process, the phase formation and the phase stability were investigated as function of the temperature (800°C – 1200°C) and the oxygen partial pressure (1.013 x 10¹ – 1.013 x 10⁵ Pa). The phase formation starts with the reaction of the metallic components to simple oxides (Fe₃O₄, Fe₂O₃, CuO). From these simple oxides, the formation of complex oxides requires a minimum temperature of 800°C. The synthesis of single phase spinel compounds Cu²⁺_1‐2x Cu¹⁺_xFe_2+xO_4±δ is realized for 0.1 ≤ x ≤ 0.5, using specific temperature – p(O₂) – conditions for a given value of x. Remarkably, to achieve our goal, we found that the increase of x implies that of the reaction temperature and/or a decrease of the p(O₂) in the reaction gas stream. Besides, a single phase spinel CuFe₂O₄ does not exist in the temperature / p(O₂)‐field investigated. Using the results of XRD ‐ phase analysis, T ‐ p(O₂) – x – diagrams were constructed. These diagrams allow the prediction of phase compositions expected for different synthesis conditions. (© 2004 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Preparation and characterization of monodispersed PbSe nanocubes

Monodispersed PbSe nanocubes were synthesized through a simple hydrothermal method by using Pb²⁺‐EDTA complex and Na₂SeSO₃. Composition and morphology of the samples were characterized by means of XRD, TEM and SEM. The gradually releasing of Pb²⁺ from Pb²⁺‐EDTA complex, and the adopting of PVP can adjust the growth rate in <100> and <111> directions of PbSe. Both Pb²⁺‐EDTA complex and PVP played important roles in the crystal growth of the monodispersed PbSe nanocubes. In addition, UV‐vis and photoluminescence properties were characterized. E_g of the PbSe nanocubes is 1.5 eV approximately, which is much larger than that of bulk PbSe. Under PL excitation at 406 nm, a red emission peak at 696 nm is observed, showing that the synthesized PbSe is luminescent nanomaterials. (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Studies on electrical conduction behavior of La1‐3xCaxBaxSrxMnO3 synthesized by chemical route

In the manganite La_1‐xM_xMnO₃ (M = Ca, Ba, Sr) the doping concentration introduces a mixed valency (Mn³⁺, Mn⁴⁺) which governs the magnetic and electrical properties of the compound. The perovskite oxides La_1‐3xCa_xBa_xSr_xMnO₃ (x = 0.00, 0.05, 0.10) were prepared by chemical method. Single‐phase formation is confirmed by XRD studies. The electrical behavior of compositions with x = 0.00, 0.05 and 0.10 in the system La_1‐3xCa_xBa_xSr_xMnO₃ was studied in the temperature range 300‐420 K. It is observed that conductivity decreases with increasing temperature as well as dopants concentration. Metallic behavior of these compositions decreases with increasing dopants concentration (x). The microstructures of these samples have been characterized using scanning electron microscopy (SEM). (© 2007 WILEY ‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Photoemission studies of Titanium Oxides

Titanium exposed to dry air at varying temperatures are studied by X-ray photoelectron spectroscopy (XPS) in combination with low energy Ar ion sputtering. The 2 nm deposit formed at room temperature in 30^d is an oxide mixture with chiefly Ti₂O₃. This result is indicated by the Ti(2p) level binding energy, FWHM and asymmetry. The dry air exposures at high temperatures resulted in oxide species of nonstoichiometric TiO_2–x. As proposed from sputtering effects to XP-spectra the oxygen deficient TiO_2–x surface region includes Ti³⁺-interstitials. These interstitials act as donors (emission to (3d)-states) and hinder the oxygen diffusion via interstitials (temperature: ≦ 550 °C). It is to be noted that electron emission from donor states is favoured in deeper lying (2p)-states by decreasing concentration of oxygen vacancies.     

X‐ray diffraction analysis of powder and thin film of (Gd1‐x Yx)2O3 prepared by sol‐gel process

The mixed oxide (Gd_1‐xY_x)₂O₃ (0.0 ≤ x ≤ 1.0) were synthesized, as powder and thin film, by a sol‐gel process. X‐ray diffraction data were collected and crystal structure and microstructure analysis were performed using Rietveld refinement method. All samples were found to have the same crystal system and formed solid solutions over the whole range of x. The cationic distribution, Gd³⁺ and Y³⁺, over the two non‐equivalent sites 8b and 24d of the space group Ia3 is found to be random for all values of (x). The lattice parameter is found to vary linearly with the composition (x). Replacing Gd³⁺ and Y³⁺ by each other introduces a systemic decrease in the x‐coordinate of cation position (24d) and slight changes in the oxygen coordinates. Crystallite size and microstrain analysis is performed along different crystallographic directions and anisotropic changes are found with the composition parameter (x). The average crystallite size ranges from 75 to 149 nm and the r.m.s strain from 0.027 to 0.068 x10^‐2. Textured Gd_1.841Y_0.159O₃ (400) buffer layers, with a high degree of alignment in both out‐plane and in‐plan, are successfully grown on cube textured Ni (001) tape substrates by sol–gel dip coating process. The resulting buffer layers are crack‐free, pinhole‐free, dense and smooth. YbBa₂Cu₃O_7‐x (YbBCO) thin film could be (00l) epitaxially grown on the obtained buffer layer using sol–gel dipping technique. (© 2007 WILEY ‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Growth and characterization of large La1‐xPbxMnO3+δ (x=0.32–0.35) crystals

Large crystals of La_0.63Pb_0.37Mn O_3+δ with small La(Pb)‐ deficiency of about 0.005‐0.01 at.% were grown by high temperature solution growth method. The structure of the grown crystals was determined as rhombohedral with R‐3 space group by single‐crystal X‐ray diffractometry. The surface morphology of the crystals and the exact chemical composition was examined by scanning electron microscopy and energy dispersive X‐ray analysis methods, respectively. The IR‐transmission spectrum reveals the presence of Mn³⁺O₆‐ and Mn⁴⁺O₆‐ octahedra in the lattice of La_0.63Pb_0.37Mn O_3+δ crystals. (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Predicting a major role of surface spins in the magnetic properties of ferrite nanoparticles

Room‐temperature magnetization hysterisis measurements were conducted on Mn_0.5Zn_0.5Gd_xFe_(2‐x)O₄ ferrite nanoparticles, with x = 0, 0.5, 1.0, 1.5. The structure of this ferrite is normal spinel where the added of Gd³⁺ ions occupied the octahedral sites and replaces Fe³⁺ ions. The saturation magnetization was found to increase with the initial addition of the Gd³⁺ ions followed by a sharp decrease with further addition of Gd³⁺ ions. The Curie temperature was found to increase up to Gd³⁺ concentration of x = 1.0, and then decreases at x = 1.5. These results were attributed to the surface spins. Because the size of Gd³⁺ ions is larger than that of Fe³⁺ ions, the substitution of Fe³⁺ ions with the Gd³⁺ ions results in surface disorder which results in surface spins. A core‐shell magnetization model was introduced where several factors were combined to explain our results. (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Ba2.2Ca0.8Mg4F14, a new “solid solution stabilized” matrix for an intense blue phosphor

Barium calcium magnesium fluoride (Ba₂(Ba_xCa_1‐x)Mg₄F₁₄, x=0.19‐0.26) has been synthesized at 850 °C from precursors prepared by the solution precipitation method. Single crystals with composition of Ba_2.200(2)Ca_0.800(2)Mg₄F₁₄were obtained after prolonged heating. Lattice parameters from single crystal data are a = 12.4203(8) and c = 7.4365(5) Å [tetragonal, space group P4₂/mnm (No. 136)]. They increase with increasing barium concentration within a given stability window. The structure is built of a network of MgF₆ octahedra forming a pyrochlore related channel system and isolated fluorine ions. Within the channels, heavy alkaline earth ions are located. The wide channel is filled with off‐center positioned barium ions. The channel with a narrow cross section hosts both ions, Ca²⁺and Ba²⁺. The structure is isotypic with Pb₃Nb₄O₁₂F₂ but has a different coordination around Ba/Ca and Pb, respectively. Doped with ∼1% Eu(II), the compound shows intense blue luminescence under UV activation. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Investigations for Sn diffusion in Pb1−xSnxTe and PbTe

By annealing Pb_1−xSn_xTe and PbTe isothermally in a quartz ampoule Sn diffused from Pb_1−xSn_xTe into PbTe. The profiles obtained have been investigated by means of an electron beam microanalyser, and the coefficients of diffusion have been determined at various temperatures. The diffusion of Sn can be explained by the expressions: D_PbSnTe = 1.5 · 10⁻¹ exp (−1.8 eV/kT) cm² s⁻¹ (0,14 < x < 0,18) D_PbTe = 5,5 · 10⁻⁴ exp (−1.5 eV/kT) cm² s⁻¹. N-type layers are observed at the surface of Pb_1−xSn_xTe specimens.     

Growth,structure, and superconducting properties of Bi2Sr2Ca2Cu3O10 and (Bi,Pb)2Sr2Ca2Cu3O10‐y crystals

Large and high‐quality single crystals of both Pb‐free and Pb‐doped high temperature superconducting compounds (Bi_1‐xPb_x)₂Sr₂Ca₂Cu₃O_10‐y (x = 0 and 0.3) were grown by means of a newly developed “Vapour‐Assisted Travelling Floating Zone” technique (VA‐TSFZ). This modified zone‐melting technique was realised in an image furnace and allowed for the first time to grow Pb‐doped crystals by compensating for the Pb losses occurring at high temperature. Crystals up to 3×2×0.1 mm³ were successfully grown. Post‐annealing under high pressure of O₂ (up to 10 MPa at T = 500°C) was undertaken to enhance T_c and improve the homogeneity of the crystals. Structural characterisation was performed by single‐crystal X‐ray diffraction (XRD) and the structure of the 3‐layer Bi‐based superconducting compound was refined for the first time. Structure refinement showed an incommensurate superlattice in the Pb‐free crystals. The space group is orthorhombic, A2aa, with cell parameters a = 27.105(4) Å, b = 5.4133(6) Å and c = 37.009(7) Å. Superconducting studies were carried out by A.C. and D.C. magnetic measurements. Very sharp superconducting transitions were obtained in both kinds of crystals (ΔT_c ≤ 1 K). In optimally doped Pb‐free crystals, critical temperatures up to 111 K were measured. Magnetic critical current densities of 2�10⁵ A/cm² were measured at T = 30 K and μ₀H = 0 T. A weak second peak in the magnetisation loops was observed in the temperature range 40‐50 K above which the vortex lattice becomes entangled. We have measured a portion of the irreversibility line (0.1‐5 Tesla) and fitted the expression for the melting of a vortex glass in a 2D fluctuation regime to the experimental data. Measurements of the lower critical field allowed to obtain the dependence of the penetration depth on temperature: the linear dependence of λ(T) for T < 30 K is consistent with d‐wave superconductivity in Bi‐2223. (© 2004 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Synthesis and single crystal X‐ray structure of the tetragonal tungsten bronze Pb0.91K1.72Li1.46Nb5O15

Crystals of Pb_0.91K_1.72Li_1.46Nb₅O₁₅, belonging to tetragonal tungsten bronze materials, were grown by the slow cooling technique, and characterized by means of single crystal X‐ray diffraction: the structure was solved in the P4bm tetragonal space group, with the following unit cell parameters: a = 12.548(5), c = 4.042(5) Å, V = 636.4(9) ų. The three‐dimensional framework can be described as a layered structure down crystallographic axis c, with arrays of NbO₆ octahedra, whose corner sharing makes up the formation of tunnels filled up by Li, Pb and K displaying complex cation‐oxygen coordinations. (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Radiation effects in ZrF4 based glasses: I. Electron spin resonance

Binary ZrF₄BaF₂, HfF₄BaF₂, and multicomponent ZrF₄ based glasses have been studied by electron spin resonance spectroscopy after liquid-nitrogen-temperature X-irradiations and room-temperature γ-ray irradiations. Polycrystalline BaF₂, ZrF₄ and HfF₄ were investigated in the same manner for comparison purposes. Isochronal anneal experiments have distinguished several resonances in the glasses which are characterized as due to F₂^? molecular ions, F⁰ interstitial atoms and Zr³⁺ and Hf³⁺ ions. Two more signals are tentatively assigned as due to a hole trapped on several fluorine ions and a hole trapped on an oxygen impurity. In lead-containing glasses the formation of Zr³⁺ is strongly inhibited, presumably due to the competitive formation of Pb⁺ ions. However, the radiation production of Pb³⁺ ions was independently observed, thus suggesting that the Pb²⁺ ions may serve as traps for charge carriers of either sign. No defects were detected which could be explicitly associated with other cationic constituents, such as La³⁺, Al³⁺, or Li⁺.     

Isomorphous substitution and luminescence properties of haloapatites synthesized by the low-temperature method

Single-phase polycrystalline fluorapatites of the Ca_{10 − x} Me _x (PO₄)₆F₂:Eu³⁺ (Me = Pb, Mg) composition are obtained by deposition from aqueous solutions. The effect of modifier ions (Pb²⁺, Mg²⁺) with significantly different ionic radii on the structure and spectral luminescence properties of the fluorapatites are studied. It is established that Pb²⁺ and Mg²⁺ ions affect the preferred location of Eu³⁺ ions in the structure of Ca_{10 − x} Me _x (PO₄)₆F₂ crystals.     

Properties of AgGa1‐xInxSe2 single crystals grown by Bridgman method

High‐pure and single‐phase AgGa_1‐xIn_xSe₂ (x=0.2) polycrystalline was synthesized by the mechanical and temperature oscillation method. Adopting the modified Bridgman method an integral AgGa_1‐xIn_xSe₂ single crystal with diameter of 14 mm and length of 35 mm has been obtained at the rate of 6 mm/day. It was found that there is a new cleavage face which was (101), and observed the four order X‐ray spectrum of the {101} faces. By the method of DSC analysis the melting and freezing points of the AgGa_1‐xIn_xSe₂ (x=0.2) single crystal were about 828°C and 790°C. The transmission spectra of the AgGa_1‐xIn_xSe₂ (x=0.2) sample of 5×6×2 mm³ were obtained by means of UV and IR spectrophotometer. The limiting frequency was 774.316nm and the band gap was 1.6eV. It can be found in the infrared spectrum that the infrared transmission was above 60% from 4000cm^‐1 to 600cm^‐1. The value of α in 5.3µm and 10.6µm were 0.022cm^‐1 and 0.1cm^‐1 respectively. All results showed that the crystal was of good quality. (© 2007 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Validation of the mechanism of nitrogen/oxygen substitution in Li–Na–Pb–P–O–N oxynitride phosphate glasses

As evidenced by O_1s X-ray photoelectron spectroscopy, there are three kinds of oxygen atoms in Li_0.25Na_0.25Pb_0.25PO_3−3x/2N_x oxynitride phosphate glasses (0 < x ⩽ 0.67): (i) bridging oxygens (BO) which interconnect the P(O, N)₄ tetrahedral units of the glass network (ii) non-bridging oxygens (NBO) which coordinate the modifier cations and (iii) oxygen atoms, also non-bridging, which belong to PO₄ tetrahedra involved in the coordination sphere of Pb²⁺. The variation of their relative proportions as the nitrogen content increases is explained according to the nitridation mechanism previously proposed for this series of glasses. Moreover, the variation of the BO/NBO ratio confirms that the nitrogen/oxygen substitution taking place during nitridation obeys the simple chemical equivalences already stated.     

Synthesis and Electrical Properties of a Fluorite-Like Nd<Subscript>5</Subscript>Mo<Subscript>3</Subscript>O<Subscript>16</Subscript> Compound with Partial Substitution of Molybdenum by Tungsten,Niobium, or Vanadium

The phase formation of Nd₅Mo_{3 – x}W _x O_16.5, Nd₅Mo_{3 – x}Nb _x O_{16.5 – х/2}, and Nd₅Mo_{3 – x}V _x O_{16.5 – х/2} solid solutions based on a fluorite-like Nd₅Mo₃O_16.5 compound (mixed conductor with interstitial oxygen conductivity) has been studied. The electrical conductivity of doped compounds obeys the Arrhenius law and, at a low impurity content, is as high as 0.03–0.08 S/cm at 800°C. Substitution of Mo⁶⁺ cations by V⁵⁺ and Nb⁵⁺ cations reduces the interstitial oxygen content, which causes a decrease in the solid-solution electrical conductivity by 1–2 orders of magnitude and a decrease in the cubic unit-cell parameter. A wide diffuse anomaly with a maximum of about 1500–4000 has been observed in the temperature dependence of the permittivity for all single-crystal and polycrystalline samples in the range of 300–900°C.     

Growth of ZnO single crystals by an induced nucleation from a high temperature solution of the ZnO‐PbF2 system

To grow ZnO single crystals from a high temperature solution of the ZnO‐PbF₂ system, a gas cooling system was assembled at the bottom of the crucible to induce nucleation in the initial growth stage. The growth experiments were carried out in a homemade vertical Bridgman furnace and Pt crucible of 28 mm in diameter was used. The furnace temperature was set to 1100°C and the flow rate of the oxygen gas was optimized as 3.0 l/min. ZnO crystal up to 5∼8mm in the thickness was obtained with the lowering rate of 0.3 mm/h. XRD patterns showed that the as‐grown crystal was pure ZnO Wurtzite phase. The impurity ions were analyzed by the glow discharge mass spectroscopy (GDMS) as 390.0 ppm and 40.0 ppm for Pb²⁺ and F^‐, respectively. (© 2007 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Substitution effects on ferroelectric,leakage current and anti‐fatigue characteristic of Bi4‐xSbxTi3O12 thin films

Bi_4‐xSb_xTi₃O₁₂ (BSTO) (x = 0, 0.03, 0.04, 0.05, 0.06 and 0.07) thin films have been fabricated on Pt/Ti/SiO₂/Si substrates by sol‐gel method. The effects of various Sb³⁺ content on microstructure and ferroelectric properties of systems are investigated. XRD show that Bi_4‐xSb_xTi₃O₁₂ (x≠0) thin films prefer (117) orientation. The substitution Sb³⁺ for Bi³⁺ reduces the grain size of the film surface. Compared to the BTO (x = 0) film, Bi_4‐xSb_xTi₃O₁₂ films display exciting electric properties. Especially when x = 0.04, the film Bi_3.96Sb_0.04Ti₃O₁₂ has achieved the max 2Pr value of 87μC/cm². This film also has a better anti‐fatigue characteristic, which can be up to 10¹⁰ switching cycles without fatigue. The leakage current density improved with J = 8×10⁻⁸ A/cm².